ramips: remove accidentally comitted code

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 49161

target/linux/ramips/image/Makefile

@@ -260,101 +260,6 @@ ifeq ($(SUBTARGET),mt7621)
 include mt7621.mk
 endif
 
-<<<<<<< HEAD
-=======
-define Device/mt7621
-  DTS := MT7621
-  IMAGE_SIZE := $(ralink_default_fw_size_4M)
-endef
-
-define Device/wsr-600
-  DTS := WSR-600
-  IMAGE_SIZE := $(ralink_default_fw_size_16M)
-endef
-
-define Device/re6500
-  DTS := RE6500
-endef
-
-define Device/wsr-1166
-  DTS := WSR-1166
-  IMAGE/sysupgrade.bin := trx | pad-rootfs
-  IMAGE_SIZE := $(ralink_default_fw_size_16M)
-endef
-
-define Device/dir-860l-b1
-  DTS := DIR-860L-B1
-  IMAGES += factory.bin
-  KERNEL := kernel-bin | patch-dtb | relocate-kernel | lzma | uImage lzma
-  IMAGE_SIZE := $(ralink_default_fw_size_16M)
-  IMAGE/sysupgrade.bin := \
-	append-kernel | pad-offset 65536 64 | append-rootfs | \
-	seama -m "dev=/dev/mtdblock/2" -m "type=firmware" | \
-	pad-rootfs | check-size $$$$(IMAGE_SIZE)
-  IMAGE/factory.bin := \
-	append-kernel | pad-offset 65536 64 | append-rootfs | pad-rootfs -x 64 | \
-	seama -m "dev=/dev/mtdblock/2" -m "type=firmware" | \
-	seama-seal -m "signature=wrgac13_dlink.2013gui_dir860lb" | \
-	check-size $$$$(IMAGE_SIZE)
-endef
-
-define Device/firewrt
-  DTS := FIREWRT
-  IMAGE_SIZE := $(ralink_default_fw_size_16M)
-endef
-
-define Device/pbr-m1
-  DTS := PBR-M1
-  IMAGE_SIZE := $(ralink_default_fw_size_16M)
-endef
-
-define Device/sap-g3200u3
-  DTS := SAP-G3200U3
-endef
-
-define Device/witi
-  DTS := WITI
-  IMAGE_SIZE := $(ralink_default_fw_size_16M)
-endef
-
-define Device/zbt-wg2626
-  DTS := ZBT-WG2626
-  IMAGE_SIZE := $(ralink_default_fw_size_16M)
-endef
-
-define Device/wf-2881
-  DTS := WF-2881
-  BLOCKSIZE := 128KiB
-  PAGESIZE := 2048
-  FILESYSTEMS := squashfs
-  IMAGE_SIZE := 132382720
-  KERNEL := $(KERNEL_DTB) | pad-offset 131072 64 | uImage lzma
-  IMAGE/sysupgrade.bin := append-kernel | append-ubi | check-size $$$$(IMAGE_SIZE)
-endef
-
-define Device/ubnt-erx
-  DTS := UBNT-ERX
-  FILESYSTEMS := squashfs
-  KERNEL_SIZE := 3145728
-  KERNEL := $(KERNEL_DTB) | uImage lzma
-  IMAGES := sysupgrade.tar $(if $(CONFIG_TARGET_ROOTFS_INITRAMFS),factory-initramfs.tar)
-  IMAGE/factory-initramfs.tar := ubnt-erx-factory-compat | \
-				 ubnt-erx-factory-kernel | \
-				 ubnt-erx-factory-rootfs | \
-				 ubnt-erx-factory-version | \
-				 ubnt-erx-factory-check-size $$(KERNEL_SIZE)
-  IMAGE/sysupgrade.tar := sysupgrade-nand
-endef
-
-#
-# MT7628 Profiles
-#
-
-Image/Build/Profile/MIWIFI-NANO=$(call BuildFirmware/Default16M/$(1),$(1),miwifi-nano,MIWIFI-NANO)
-Image/Build/Profile/MT7628=$(call BuildFirmware/Default4M/$(1),$(1),mt7628,MT7628)
-Image/Build/Profile/WRTNODE2P=$(call BuildFirmware/Default16M/$(1),$(1),wrtnode2p,WRTNODE2P)
-
->>>>>>> Adjust image size limit for the D-Link DIR-860L B1
 ifeq ($(SUBTARGET),mt7628)
 include mt7628.mk
 endif