mirror of https://github.com/hak5/openwrt-owl.git
ar71xx: ar8216: tagged+untagged on ar8327 (#12181)
This allows tagged and untagged traffic together on the same port on ar8327 switch devices. I looked at the first attempt to do this in r40777 (ar71xx: Fix tagged+untagged operation on AR8327N (#12181)). I also set the vlan and port egress policies like that change. But I change vlan_tagged in an less intrusive way. The tagged/untagged decision is now based on the following rules: - if vid != pvid then traffic is always tagged - if vid == pvid then vlan_tagged stores if the traffic should be tagged Tested on TP-Link WDR-3600 (ar8327N). Signed-off-by: Valentin Spreckels <Valentin.Spreckels@Informatik.Uni-Oldenburg.DE> SVN-Revision: 42653owl
parent
1c675ee9be
commit
38a8f5ae63
|
@ -1748,7 +1748,7 @@ ar8327_vtu_load_vlan(struct ar8xxx_priv *priv, u32 vid, u32 port_mask)
|
|||
mode = AR8327_VTU_FUNC0_EG_MODE_NOT;
|
||||
else if (priv->vlan == 0)
|
||||
mode = AR8327_VTU_FUNC0_EG_MODE_KEEP;
|
||||
else if (priv->vlan_tagged & BIT(i))
|
||||
else if ((priv->vlan_tagged & BIT(i)) || (priv->vlan_id[priv->pvid[i]] != vid))
|
||||
mode = AR8327_VTU_FUNC0_EG_MODE_TAG;
|
||||
else
|
||||
mode = AR8327_VTU_FUNC0_EG_MODE_UNTAG;
|
||||
|
@ -1767,10 +1767,7 @@ ar8327_setup_port(struct ar8xxx_priv *priv, int port, u32 members)
|
|||
|
||||
if (priv->vlan) {
|
||||
pvid = priv->vlan_id[priv->pvid[port]];
|
||||
if (priv->vlan_tagged & (1 << port))
|
||||
egress = AR8327_PORT_VLAN1_OUT_MODE_TAG;
|
||||
else
|
||||
egress = AR8327_PORT_VLAN1_OUT_MODE_UNTAG;
|
||||
egress = AR8327_PORT_VLAN1_OUT_MODE_UNMOD;
|
||||
ingress = AR8216_IN_SECURE;
|
||||
} else {
|
||||
pvid = port;
|
||||
|
@ -1902,6 +1899,30 @@ ar8xxx_sw_get_ports(struct switch_dev *dev, struct switch_val *val)
|
|||
return 0;
|
||||
}
|
||||
|
||||
static int
|
||||
ar8327_sw_get_ports(struct switch_dev *dev, struct switch_val *val)
|
||||
{
|
||||
struct ar8xxx_priv *priv = swdev_to_ar8xxx(dev);
|
||||
u8 ports = priv->vlan_table[val->port_vlan];
|
||||
int i;
|
||||
|
||||
val->len = 0;
|
||||
for (i = 0; i < dev->ports; i++) {
|
||||
struct switch_port *p;
|
||||
|
||||
if (!(ports & (1 << i)))
|
||||
continue;
|
||||
|
||||
p = &val->value.ports[val->len++];
|
||||
p->id = i;
|
||||
if ((priv->vlan_tagged & (1 << i)) || (priv->pvid[i] != val->port_vlan))
|
||||
p->flags = (1 << SWITCH_PORT_FLAG_TAGGED);
|
||||
else
|
||||
p->flags = 0;
|
||||
}
|
||||
return 0;
|
||||
}
|
||||
|
||||
static int
|
||||
ar8xxx_sw_set_ports(struct switch_dev *dev, struct switch_val *val)
|
||||
{
|
||||
|
@ -1933,6 +1954,31 @@ ar8xxx_sw_set_ports(struct switch_dev *dev, struct switch_val *val)
|
|||
return 0;
|
||||
}
|
||||
|
||||
static int
|
||||
ar8327_sw_set_ports(struct switch_dev *dev, struct switch_val *val)
|
||||
{
|
||||
struct ar8xxx_priv *priv = swdev_to_ar8xxx(dev);
|
||||
u8 *vt = &priv->vlan_table[val->port_vlan];
|
||||
int i, j;
|
||||
|
||||
*vt = 0;
|
||||
for (i = 0; i < val->len; i++) {
|
||||
struct switch_port *p = &val->value.ports[i];
|
||||
|
||||
if (p->flags & (1 << SWITCH_PORT_FLAG_TAGGED)) {
|
||||
if (val->port_vlan == priv->pvid[p->id]) {
|
||||
priv->vlan_tagged |= (1 << p->id);
|
||||
}
|
||||
} else {
|
||||
priv->vlan_tagged &= ~(1 << p->id);
|
||||
priv->pvid[p->id] = val->port_vlan;
|
||||
}
|
||||
|
||||
*vt |= 1 << p->id;
|
||||
}
|
||||
return 0;
|
||||
}
|
||||
|
||||
static void
|
||||
ar8327_set_mirror_regs(struct ar8xxx_priv *priv)
|
||||
{
|
||||
|
@ -2475,8 +2521,8 @@ static const struct switch_dev_ops ar8327_sw_ops = {
|
|||
},
|
||||
.get_port_pvid = ar8xxx_sw_get_pvid,
|
||||
.set_port_pvid = ar8xxx_sw_set_pvid,
|
||||
.get_vlan_ports = ar8xxx_sw_get_ports,
|
||||
.set_vlan_ports = ar8xxx_sw_set_ports,
|
||||
.get_vlan_ports = ar8327_sw_get_ports,
|
||||
.set_vlan_ports = ar8327_sw_set_ports,
|
||||
.apply_config = ar8xxx_sw_hw_apply,
|
||||
.reset_switch = ar8xxx_sw_reset_switch,
|
||||
.get_port_link = ar8xxx_sw_get_port_link,
|
||||
|
|
Loading…
Reference in New Issue