hak5
/
openwrt-owl
mirror of https://github.com/hak5/openwrt-owl.git
1
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity

omap: remove 3.12 kernel patches 

Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 42401
owl
Felix Fietkau 2014-09-02 17:00:46 +00:00
parent 1839d1b912
commit 366007c3d8
51 changed files with 0 additions and 4956 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

57
target/linux/omap/patches-3.12/002-ARM-dts-AM33xx-Correct-gpio-interrupt-cells-property.patch
View File

@ -1,57 +0,0 @@
From 29f3723bf62d46c238dcc5436787a8ad6b25a385 Mon Sep 17 00:00:00 2001
From: Lars Poeschel <poeschel@lemonage.de>
Date: Wed, 7 Aug 2013 13:06:32 +0200
Subject: [PATCH 02/14] ARM: dts: AM33xx: Correct gpio #interrupt-cells
property
Following commit ff5c9059 and therefore other omap platforms using
the gpio-omap driver correct the #interrupt-cells property on am33xx
too. The omap gpio binding documentaion also states that
the #interrupt-cells property should be 2.
Signed-off-by: Lars Poeschel <poeschel@lemonage.de>
Reviewed-by: Javier Martinez Canillas <javier@dowhile0.org>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Benoit Cousson <bcousson@baylibre.com>
---
arch/arm/boot/dts/am33xx.dtsi | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
--- a/arch/arm/boot/dts/am33xx.dtsi
+++ b/arch/arm/boot/dts/am33xx.dtsi
@@ -106,7 +106,7 @@
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
- #interrupt-cells = <1>;
+ #interrupt-cells = <2>;
reg = <0x44e07000 0x1000>;
interrupts = <96>;
};
@@ -117,7 +117,7 @@
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
- #interrupt-cells = <1>;
+ #interrupt-cells = <2>;
reg = <0x4804c000 0x1000>;
interrupts = <98>;
};
@@ -128,7 +128,7 @@
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
- #interrupt-cells = <1>;
+ #interrupt-cells = <2>;
reg = <0x481ac000 0x1000>;
interrupts = <32>;
};
@@ -139,7 +139,7 @@
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
- #interrupt-cells = <1>;
+ #interrupt-cells = <2>;
reg = <0x481ae000 0x1000>;
interrupts = <62>;
};

203
target/linux/omap/patches-3.12/0334-video-da8xx-fb-adding-dt-support.patch
View File

@ -1,203 +0,0 @@
From 884d3962ef4787c8cf0b8a7a673531c623d1dff8 Mon Sep 17 00:00:00 2001
From: Darren Etheridge <detheridge@ti.com>
Date: Fri, 2 Aug 2013 15:35:36 -0500
Subject: [PATCH 334/752] video: da8xx-fb: adding dt support
Enhancing driver to enable probe triggered by a corresponding dt entry.
Add da8xx-fb.txt documentation to devicetree section.
Obtain fb_videomode details for the connected lcd panel using the
display timing details present in DT.
Ensure that platform data is present before checking whether platform
callback is present (the one used to control backlight). So far this
was not an issue as driver was purely non-DT triggered, but now DT
support has been added this check must be performed.
v2: squashing multiple commits from Afzal Mohammed (afzal@ti.com)
v3: remove superfluous cast
v4: expose both ti,am3352-lcdc and ti,da830-lcdc for .compatible
as driver can use enhanced features of all version of the
silicon block.
v5: addressed review comments from Prabhakar Lad
v6: Changed the .compatible naming to match the existing drm bindings
for am33xx devices
v7: clarify which compatible to use in the documentation for DA850
Acked-by: Lad, Prabhakar <prabhakar.csengg@gmail.com>
Signed-off-by: Darren Etheridge <detheridge@ti.com>
---
.../devicetree/bindings/video/da8xx-fb.txt | 42 +++++++++++++
drivers/video/da8xx-fb.c | 66 +++++++++++++++++++-
2 files changed, 105 insertions(+), 3 deletions(-)
create mode 100644 Documentation/devicetree/bindings/video/da8xx-fb.txt
--- /dev/null
+++ b/Documentation/devicetree/bindings/video/da8xx-fb.txt
@@ -0,0 +1,42 @@
+TI LCD Controller on DA830/DA850/AM335x SoC's
+
+Required properties:
+- compatible:
+ DA830, DA850 - "ti,da8xx-tilcdc"
+ AM335x SoC's - "ti,am33xx-tilcdc"
+- reg: Address range of lcdc register set
+- interrupts: lcdc interrupt
+- display-timings: typical videomode of lcd panel, represented as child.
+ Refer Documentation/devicetree/bindings/video/display-timing.txt for
+ display timing binding details. If multiple videomodes are mentioned
+ in display timings node, typical videomode has to be mentioned as the
+ native mode or it has to be first child (driver cares only for native
+ videomode).
+
+Recommended properties:
+- ti,hwmods: Name of the hwmod associated to the LCDC
+
+Example for am335x SoC's:
+
+lcdc@4830e000 {
+ compatible = "ti,am33xx-tilcdc";
+ reg = <0x4830e000 0x1000>;
+ interrupts = <36>;
+ ti,hwmods = "lcdc";
+ status = "okay";
+ display-timings {
+ 800x480p62 {
+ clock-frequency = <30000000>;
+ hactive = <800>;
+ vactive = <480>;
+ hfront-porch = <39>;
+ hback-porch = <39>;
+ hsync-len = <47>;
+ vback-porch = <29>;
+ vfront-porch = <13>;
+ vsync-len = <2>;
+ hsync-active = <1>;
+ vsync-active = <1>;
+ };
+ };
+};
--- a/drivers/video/da8xx-fb.c
+++ b/drivers/video/da8xx-fb.c
@@ -36,6 +36,7 @@
#include <linux/slab.h>
#include <linux/delay.h>
#include <linux/lcm.h>
+#include <video/of_display_timing.h>
#include <video/da8xx-fb.h>
#include <asm/div64.h>
@@ -1312,12 +1313,54 @@ static struct fb_ops da8xx_fb_ops = {
.fb_blank = cfb_blank,
};
+static struct lcd_ctrl_config *da8xx_fb_create_cfg(struct platform_device *dev)
+{
+ struct lcd_ctrl_config *cfg;
+
+ cfg = devm_kzalloc(&dev->dev, sizeof(struct fb_videomode), GFP_KERNEL);
+ if (!cfg)
+ return NULL;
+
+ /* default values */
+
+ if (lcd_revision == LCD_VERSION_1)
+ cfg->bpp = 16;
+ else
+ cfg->bpp = 32;
+
+ /*
+ * For panels so far used with this LCDC, below statement is sufficient.
+ * For new panels, if required, struct lcd_ctrl_cfg fields to be updated
+ * with additional/modified values. Those values would have to be then
+ * obtained from dt(requiring new dt bindings).
+ */
+
+ cfg->panel_shade = COLOR_ACTIVE;
+
+ return cfg;
+}
+
static struct fb_videomode *da8xx_fb_get_videomode(struct platform_device *dev)
{
struct da8xx_lcdc_platform_data *fb_pdata = dev->dev.platform_data;
struct fb_videomode *lcdc_info;
+ struct device_node *np = dev->dev.of_node;
int i;
+ if (np) {
+ lcdc_info = devm_kzalloc(&dev->dev,
+ sizeof(struct fb_videomode),
+ GFP_KERNEL);
+ if (!lcdc_info)
+ return NULL;
+
+ if (of_get_fb_videomode(np, lcdc_info, OF_USE_NATIVE_MODE)) {
+ dev_err(&dev->dev, "timings not available in DT\n");
+ return NULL;
+ }
+ return lcdc_info;
+ }
+
for (i = 0, lcdc_info = known_lcd_panels;
i < ARRAY_SIZE(known_lcd_panels); i++, lcdc_info++) {
if (strcmp(fb_pdata->type, lcdc_info->name) == 0)
@@ -1346,7 +1389,7 @@ static int fb_probe(struct platform_devi
int ret;
unsigned long ulcm;
- if (fb_pdata == NULL) {
+ if (fb_pdata == NULL && !device->dev.of_node) {
dev_err(&device->dev, "Can not get platform data\n");
return -ENOENT;
}
@@ -1386,7 +1429,10 @@ static int fb_probe(struct platform_devi
break;
}
- lcd_cfg = (struct lcd_ctrl_config *)fb_pdata->controller_data;
+ if (device->dev.of_node)
+ lcd_cfg = da8xx_fb_create_cfg(device);
+ else
+ lcd_cfg = fb_pdata->controller_data;
if (!lcd_cfg) {
ret = -EINVAL;
@@ -1405,7 +1451,7 @@ static int fb_probe(struct platform_devi
par->dev = &device->dev;
par->lcdc_clk = tmp_lcdc_clk;
par->lcdc_clk_rate = clk_get_rate(par->lcdc_clk);
- if (fb_pdata->panel_power_ctrl) {
+ if (fb_pdata && fb_pdata->panel_power_ctrl) {
par->panel_power_ctrl = fb_pdata->panel_power_ctrl;
par->panel_power_ctrl(1);
}
@@ -1653,6 +1699,19 @@ static int fb_resume(struct platform_dev
#define fb_resume NULL
#endif
+#if IS_ENABLED(CONFIG_OF)
+static const struct of_device_id da8xx_fb_of_match[] = {
+ /*
+ * this driver supports version 1 and version 2 of the
+ * Texas Instruments lcd controller (lcdc) hardware block
+ */
+ {.compatible = "ti,da8xx-tilcdc", },
+ {.compatible = "ti,am33xx-tilcdc", },
+ {},
+};
+MODULE_DEVICE_TABLE(of, da8xx_fb_of_match);
+#endif
+
static struct platform_driver da8xx_fb_driver = {
.probe = fb_probe,
.remove = fb_remove,
@@ -1661,6 +1720,7 @@ static struct platform_driver da8xx_fb_d
.driver = {
.name = DRIVER_NAME,
.owner = THIS_MODULE,
+ .of_match_table = of_match_ptr(da8xx_fb_of_match),
},
};

91
target/linux/omap/patches-3.12/0343-video-da8xx-fb-Add-API-to-register-wait-for-vsync-ca.patch
View File

@ -1,91 +0,0 @@
From 9a1a810516ae9cb3259b898b6879901c5b44fa90 Mon Sep 17 00:00:00 2001
From: Prathap M S <msprathap@ti.com>
Date: Mon, 2 Sep 2013 12:05:23 +0530
Subject: [PATCH 343/752] video: da8xx-fb: Add API to register wait for vsync
callback
This patch adds APIs to register and unregister wait for vsync callback.
This is derived from commit id 2d44302545da24fd22912d964102bc31a7489e97
This commit id was part of 3.2 kernel sources.
Signed-off-by: Prathap M S <msprathap@ti.com>
---
drivers/video/da8xx-fb.c | 33 +++++++++++++++++++++++++++++++++
include/video/da8xx-fb.h | 4 ++++
2 files changed, 37 insertions(+)
--- a/drivers/video/da8xx-fb.c
+++ b/drivers/video/da8xx-fb.c
@@ -198,6 +198,9 @@ static struct fb_fix_screeninfo da8xx_fb
.accel = FB_ACCEL_NONE
};
+static vsync_callback_t vsync_cb_handler;
+static void *vsync_cb_arg;
+
static struct fb_videomode known_lcd_panels[] = {
/* Sharp LCD035Q3DG01 */
[0] = {
@@ -826,6 +829,32 @@ static int lcd_init(struct da8xx_fb_par
return 0;
}
+int register_vsync_cb(vsync_callback_t handler, void *arg, int idx)
+{
+ if ((vsync_cb_handler == NULL) && (vsync_cb_arg == NULL)) {
+ vsync_cb_arg = arg;
+ vsync_cb_handler = handler;
+ } else {
+ return -EEXIST;
+ }
+
+ return 0;
+}
+EXPORT_SYMBOL(register_vsync_cb);
+
+int unregister_vsync_cb(vsync_callback_t handler, void *arg, int idx)
+{
+ if ((vsync_cb_handler == handler) && (vsync_cb_arg == arg)) {
+ vsync_cb_handler = NULL;
+ vsync_cb_arg = NULL;
+ } else {
+ return -ENXIO;
+ }
+
+ return 0;
+}
+EXPORT_SYMBOL(unregister_vsync_cb);
+
/* IRQ handler for version 2 of LCDC */
static irqreturn_t lcdc_irq_handler_rev02(int irq, void *arg)
{
@@ -863,6 +892,8 @@ static irqreturn_t lcdc_irq_handler_rev0
LCD_DMA_FRM_BUF_CEILING_ADDR_0_REG);
par->vsync_flag = 1;
wake_up_interruptible(&par->vsync_wait);
+ if (vsync_cb_handler)
+ vsync_cb_handler(vsync_cb_arg);
}
if (stat & LCD_END_OF_FRAME1) {
@@ -938,6 +969,8 @@ static irqreturn_t lcdc_irq_handler_rev0
LCD_DMA_FRM_BUF_CEILING_ADDR_1_REG);
par->vsync_flag = 1;
wake_up_interruptible(&par->vsync_wait);
+ if (vsync_cb_handler)
+ vsync_cb_handler(vsync_cb_arg);
}
}
--- a/include/video/da8xx-fb.h
+++ b/include/video/da8xx-fb.h
@@ -91,5 +91,9 @@ struct lcd_sync_arg {
/* Proprietary FB_SYNC_ flags */
#define FB_SYNC_CLK_INVERT 0x40000000
+typedef void (*vsync_callback_t)(void *arg);
+int register_vsync_cb(vsync_callback_t handler, void *arg, int idx);
+int unregister_vsync_cb(vsync_callback_t handler, void *arg, int idx);
+
#endif /* ifndef DA8XX_FB_H */

38
target/linux/omap/patches-3.12/0752-video-da8xx-fb-fix-defect-with-vsync-callback-invoca.patch
View File

@ -1,38 +0,0 @@
From c99bd415829ef29adf71bb1e1b577650f10e93f5 Mon Sep 17 00:00:00 2001
From: Darren Etheridge <detheridge@ti.com>
Date: Mon, 4 Nov 2013 12:27:40 -0600
Subject: [PATCH 752/752] video/da8xx-fb fix defect with vsync callback
invocation
Fix defect where SGX is running at half of the expected framerate.
The original patch (@ commit ID 9a1a810516ae9cb3259b898b6879901c5b44fa90)
seems to have a mistake where it only calls the callback
for the even or the odd frames depending on the revision of the LCD controller
This patch corrects this and invokes the callback for both odd and even frame
for just the Rev02 version of the LCDC (won't find an SGX GPU on a Rev01).
Signed-off-by: Darren Etheridge <detheridge@ti.com>
---
drivers/video/da8xx-fb.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
--- a/drivers/video/da8xx-fb.c
+++ b/drivers/video/da8xx-fb.c
@@ -904,6 +904,8 @@ static irqreturn_t lcdc_irq_handler_rev0
LCD_DMA_FRM_BUF_CEILING_ADDR_1_REG);
par->vsync_flag = 1;
wake_up_interruptible(&par->vsync_wait);
+ if (vsync_cb_handler)
+ vsync_cb_handler(vsync_cb_arg);
}
/* Set only when controller is disabled and at the end of
@@ -969,8 +971,6 @@ static irqreturn_t lcdc_irq_handler_rev0
LCD_DMA_FRM_BUF_CEILING_ADDR_1_REG);
par->vsync_flag = 1;
wake_up_interruptible(&par->vsync_wait);
- if (vsync_cb_handler)
- vsync_cb_handler(vsync_cb_arg);
}
}

36
target/linux/omap/patches-3.12/100-ARM-dts-add-AM33XX-EDMA-support.patch
View File

@ -1,36 +0,0 @@
Adds AM33XX EDMA support to the am33xx.dtsi as documented in
Documentation/devicetree/bindings/dma/ti-edma.txt
[Joel Fernandes <joelf@ti.com>]
Drop DT entries that are non-hardware-description as discussed in [1]
[1] https://patchwork.kernel.org/patch/2226761/
Signed-off-by: Matt Porter <mporter@ti.com>
Signed-off-by: Joel A Fernandes <joelagnel@ti.com>
---
arch/arm/boot/dts/am33xx.dtsi | 12 ++++++++++++
1 file changed, 12 insertions(+)
--- a/arch/arm/boot/dts/am33xx.dtsi
+++ b/arch/arm/boot/dts/am33xx.dtsi
@@ -100,6 +100,18 @@
reg = <0x48200000 0x1000>;
};
+ edma: edma@49000000 {
+ compatible = "ti,edma3";
+ ti,hwmods = "tpcc", "tptc0", "tptc1", "tptc2";
+ reg = <0x49000000 0x10000>,
+ <0x44e10f90 0x10>;
+ interrupts = <12 13 14>;
+ #dma-cells = <1>;
+ dma-channels = <64>;
+ ti,edma-regions = <4>;
+ ti,edma-slots = <256>;
+ };
+
gpio0: gpio@44e07000 {
compatible = "ti,omap4-gpio";
ti,hwmods = "gpio1";

35
target/linux/omap/patches-3.12/101-ARM-dts-add-AM33XX-SPI-DMA-support.patch
View File

@ -1,35 +0,0 @@
Adds DMA resources to the AM33XX SPI nodes.
Signed-off-by: Matt Porter <mporter@ti.com>
Signed-off-by: Joel A Fernandes <joelagnel@ti.com>
---
arch/arm/boot/dts/am33xx.dtsi | 10 ++++++++++
1 file changed, 10 insertions(+)
--- a/arch/arm/boot/dts/am33xx.dtsi
+++ b/arch/arm/boot/dts/am33xx.dtsi
@@ -335,6 +335,11 @@
interrupts = <65>;
ti,spi-num-cs = <2>;
ti,hwmods = "spi0";
+ dmas = <&edma 16
+ &edma 17
+ &edma 18
+ &edma 19>;
+ dma-names = "tx0", "rx0", "tx1", "rx1";
status = "disabled";
};
@@ -346,6 +351,11 @@
interrupts = <125>;
ti,spi-num-cs = <2>;
ti,hwmods = "spi1";
+ dmas = <&edma 42
+ &edma 43
+ &edma 44
+ &edma 45>;
+ dma-names = "tx0", "rx0", "tx1", "rx1";
status = "disabled";
};

166
target/linux/omap/patches-3.12/103-ARM-dts-add-AM33XX-MMC-support-and-documentation.patch
View File

@ -1,166 +0,0 @@
Adds AM33XX MMC support for am335x-bone, am335x-evm and am335x-evmsk boards.
Also added is the DMA binding definitions based on the generic DMA request
binding.
Additional changes made to DTS:
* Interrupt, reg and compatible properties added
* ti,needs-special-hs-handling added
Signed-off-by: Matt Porter <mporter@ti.com>
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Joel Fernandes <joelf@ti.com>
---
.../devicetree/bindings/mmc/ti-omap-hsmmc.txt | 26 ++++++++++++++-
arch/arm/boot/dts/am335x-bone.dts | 11 +++++++
arch/arm/boot/dts/am335x-evm.dts | 7 ++++
arch/arm/boot/dts/am335x-evmsk.dts | 7 ++++
arch/arm/boot/dts/am33xx.dtsi | 38 ++++++++++++++++++++++
5 files changed, 88 insertions(+), 1 deletion(-)
--- a/Documentation/devicetree/bindings/mmc/ti-omap-hsmmc.txt
+++ b/Documentation/devicetree/bindings/mmc/ti-omap-hsmmc.txt
@@ -20,8 +20,29 @@ ti,dual-volt: boolean, supports dual vol
ti,non-removable: non-removable slot (like eMMC)
ti,needs-special-reset: Requires a special softreset sequence
ti,needs-special-hs-handling: HSMMC IP needs special setting for handling High Speed
+dmas: List of DMA specifiers with the controller specific format
+as described in the generic DMA client binding. A tx and rx
+specifier is required.
+dma-names: List of DMA request names. These strings correspond
+1:1 with the DMA specifiers listed in dmas. The string naming is
+to be "rx" and "tx" for RX and TX DMA requests, respectively.
+
+Examples:
+
+[hwmod populated DMA resources]
+
+ mmc1: mmc@0x4809c000 {
+ compatible = "ti,omap4-hsmmc";
+ reg = <0x4809c000 0x400>;
+ ti,hwmods = "mmc1";
+ ti,dual-volt;
+ bus-width = <4>;
+ vmmc-supply = <&vmmc>; /* phandle to regulator node */
+ ti,non-removable;
+ };
+
+[generic DMA request binding]
-Example:
mmc1: mmc@0x4809c000 {
compatible = "ti,omap4-hsmmc";
reg = <0x4809c000 0x400>;
@@ -30,4 +51,7 @@ Example:
bus-width = <4>;
vmmc-supply = <&vmmc>; /* phandle to regulator node */
ti,non-removable;
+ dmas = <&edma 24
+ &edma 25>;
+ dma-names = "tx", "rx";
};
--- a/arch/arm/boot/dts/am335x-bone.dts
+++ b/arch/arm/boot/dts/am335x-bone.dts
@@ -9,3 +9,14 @@
#include "am33xx.dtsi"
#include "am335x-bone-common.dtsi"
+
+&ldo3_reg {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+};
+
+&mmc1 {
+ status = "okay";
+ vmmc-supply = <&ldo3_reg>;
+};
--- a/arch/arm/boot/dts/am335x-evm.dts
+++ b/arch/arm/boot/dts/am335x-evm.dts
@@ -477,6 +477,8 @@
};
vmmc_reg: regulator@12 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
regulator-always-on;
};
};
@@ -517,3 +519,8 @@
ti,adc-channels = <4 5 6 7>;
};
};
+
+&mmc1 {
+ status = "okay";
+ vmmc-supply = <&vmmc_reg>;
+};
--- a/arch/arm/boot/dts/am335x-evmsk.dts
+++ b/arch/arm/boot/dts/am335x-evmsk.dts
@@ -393,6 +393,8 @@
};
vmmc_reg: regulator@12 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
regulator-always-on;
};
};
@@ -419,3 +421,8 @@
phy_id = <&davinci_mdio>, <1>;
phy-mode = "rgmii-txid";
};
+
+&mmc1 {
+ status = "okay";
+ vmmc-supply = <&vmmc_reg>;
+};
--- a/arch/arm/boot/dts/am33xx.dtsi
+++ b/arch/arm/boot/dts/am33xx.dtsi
@@ -240,6 +240,44 @@
status = "disabled";
};
+ mmc1: mmc@48060000 {
+ compatible = "ti,omap4-hsmmc";
+ ti,hwmods = "mmc1";
+ ti,dual-volt;
+ ti,needs-special-reset;
+ ti,needs-special-hs-handling;
+ dmas = <&edma 24
+ &edma 25>;
+ dma-names = "tx", "rx";
+ interrupts = <64>;
+ interrupt-parent = <&intc>;
+ reg = <0x48060000 0x1000>;
+ status = "disabled";
+ };
+
+ mmc2: mmc@481d8000 {
+ compatible = "ti,omap4-hsmmc";
+ ti,hwmods = "mmc2";
+ ti,needs-special-reset;
+ dmas = <&edma 2
+ &edma 3>;
+ dma-names = "tx", "rx";
+ interrupts = <28>;
+ interrupt-parent = <&intc>;
+ reg = <0x481d8000 0x1000>;
+ status = "disabled";
+ };
+
+ mmc3: mmc@47810000 {
+ compatible = "ti,omap4-hsmmc";
+ ti,hwmods = "mmc3";
+ ti,needs-special-reset;
+ interrupts = <29>;
+ interrupt-parent = <&intc>;
+ reg = <0x47810000 0x1000>;
+ status = "disabled";
+ };
+
wdt2: wdt@44e35000 {
compatible = "ti,omap3-wdt";
ti,hwmods = "wd_timer2";

159
target/linux/omap/patches-3.12/200-ARM-OMAP2-hwmod-cleanup-HWMOD_INIT_NO_RESET-usage.patch
View File

@ -1,159 +0,0 @@
For modules/IPs/hwmods which do not have
-1- sys->class->reset()
and
-2- hardreset lines
and
-3- No way to do an ocp reset (no sysc control)
the flag 'HWMOD_INIT_NO_RESET' is not much useful.
Cleanup all such instances across various hwmod data files.
Signed-off-by: Rajendra Nayak <rnayak@ti.com>
---
arch/arm/mach-omap2/omap_hwmod_33xx_data.c | 18 +++++++++---------
arch/arm/mach-omap2/omap_hwmod_44xx_data.c | 6 +++---
arch/arm/mach-omap2/omap_hwmod_54xx_data.c | 6 +++---
3 files changed, 15 insertions(+), 15 deletions(-)
--- a/arch/arm/mach-omap2/omap_hwmod_33xx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_33xx_data.c
@@ -52,7 +52,7 @@ static struct omap_hwmod am33xx_emif_hwm
.name = "emif",
.class = &am33xx_emif_hwmod_class,
.clkdm_name = "l3_clkdm",
- .flags = (HWMOD_INIT_NO_IDLE | HWMOD_INIT_NO_RESET),
+ .flags = HWMOD_INIT_NO_IDLE,
.main_clk = "dpll_ddr_m2_div2_ck",
.prcm = {
.omap4 = {
@@ -74,7 +74,7 @@ static struct omap_hwmod am33xx_l3_main_
.name = "l3_main",
.class = &am33xx_l3_hwmod_class,
.clkdm_name = "l3_clkdm",
- .flags = (HWMOD_INIT_NO_IDLE | HWMOD_INIT_NO_RESET),
+ .flags = HWMOD_INIT_NO_IDLE,
.main_clk = "l3_gclk",
.prcm = {
.omap4 = {
@@ -96,7 +96,7 @@ static struct omap_hwmod am33xx_l3_instr
.name = "l3_instr",
.class = &am33xx_l3_hwmod_class,
.clkdm_name = "l3_clkdm",
- .flags = (HWMOD_INIT_NO_IDLE | HWMOD_INIT_NO_RESET),
+ .flags = HWMOD_INIT_NO_IDLE,
.main_clk = "l3_gclk",
.prcm = {
.omap4 = {
@@ -119,7 +119,7 @@ static struct omap_hwmod am33xx_l4_ls_hw
.name = "l4_ls",
.class = &am33xx_l4_hwmod_class,
.clkdm_name = "l4ls_clkdm",
- .flags = (HWMOD_INIT_NO_IDLE | HWMOD_INIT_NO_RESET),
+ .flags = HWMOD_INIT_NO_IDLE,
.main_clk = "l4ls_gclk",
.prcm = {
.omap4 = {
@@ -134,7 +134,7 @@ static struct omap_hwmod am33xx_l4_hs_hw
.name = "l4_hs",
.class = &am33xx_l4_hwmod_class,
.clkdm_name = "l4hs_clkdm",
- .flags = (HWMOD_INIT_NO_IDLE | HWMOD_INIT_NO_RESET),
+ .flags = HWMOD_INIT_NO_IDLE,
.main_clk = "l4hs_gclk",
.prcm = {
.omap4 = {
@@ -150,7 +150,7 @@ static struct omap_hwmod am33xx_l4_wkup_
.name = "l4_wkup",
.class = &am33xx_l4_hwmod_class,
.clkdm_name = "l4_wkup_clkdm",
- .flags = (HWMOD_INIT_NO_IDLE | HWMOD_INIT_NO_RESET),
+ .flags = HWMOD_INIT_NO_IDLE,
.prcm = {
.omap4 = {
.clkctrl_offs = AM33XX_CM_WKUP_L4WKUP_CLKCTRL_OFFSET,
@@ -170,7 +170,7 @@ static struct omap_hwmod am33xx_mpu_hwmo
.name = "mpu",
.class = &am33xx_mpu_hwmod_class,
.clkdm_name = "mpu_clkdm",
- .flags = (HWMOD_INIT_NO_IDLE | HWMOD_INIT_NO_RESET),
+ .flags = HWMOD_INIT_NO_IDLE,
.main_clk = "dpll_mpu_m2_ck",
.prcm = {
.omap4 = {
@@ -450,7 +450,7 @@ static struct omap_hwmod am33xx_ocmcram_
.name = "ocmcram",
.class = &am33xx_ocmcram_hwmod_class,
.clkdm_name = "l3_clkdm",
- .flags = (HWMOD_INIT_NO_IDLE | HWMOD_INIT_NO_RESET),
+ .flags = HWMOD_INIT_NO_IDLE,
.main_clk = "l3_gclk",
.prcm = {
.omap4 = {
@@ -532,7 +532,7 @@ static struct omap_hwmod am33xx_control_
.name = "control",
.class = &am33xx_control_hwmod_class,
.clkdm_name = "l4_wkup_clkdm",
- .flags = (HWMOD_INIT_NO_IDLE | HWMOD_INIT_NO_RESET),
+ .flags = HWMOD_INIT_NO_IDLE,
.main_clk = "dpll_core_m4_div2_ck",
.prcm = {
.omap4 = {
--- a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
@@ -914,7 +914,7 @@ static struct omap_hwmod omap44xx_emif1_
.name = "emif1",
.class = &omap44xx_emif_hwmod_class,
.clkdm_name = "l3_emif_clkdm",
- .flags = HWMOD_INIT_NO_IDLE | HWMOD_INIT_NO_RESET,
+ .flags = HWMOD_INIT_NO_IDLE,
.main_clk = "ddrphy_ck",
.prcm = {
.omap4 = {
@@ -930,7 +930,7 @@ static struct omap_hwmod omap44xx_emif2_
.name = "emif2",
.class = &omap44xx_emif_hwmod_class,
.clkdm_name = "l3_emif_clkdm",
- .flags = HWMOD_INIT_NO_IDLE | HWMOD_INIT_NO_RESET,
+ .flags = HWMOD_INIT_NO_IDLE,
.main_clk = "ddrphy_ck",
.prcm = {
.omap4 = {
@@ -2193,7 +2193,7 @@ static struct omap_hwmod omap44xx_mpu_hw
.name = "mpu",
.class = &omap44xx_mpu_hwmod_class,
.clkdm_name = "mpuss_clkdm",
- .flags = HWMOD_INIT_NO_IDLE | HWMOD_INIT_NO_RESET,
+ .flags = HWMOD_INIT_NO_IDLE,
.main_clk = "dpll_mpu_m2_ck",
.prcm = {
.omap4 = {
--- a/arch/arm/mach-omap2/omap_hwmod_54xx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_54xx_data.c
@@ -352,7 +352,7 @@ static struct omap_hwmod omap54xx_emif1_
.name = "emif1",
.class = &omap54xx_emif_hwmod_class,
.clkdm_name = "emif_clkdm",
- .flags = HWMOD_INIT_NO_IDLE | HWMOD_INIT_NO_RESET,
+ .flags = HWMOD_INIT_NO_IDLE,
.main_clk = "dpll_core_h11x2_ck",
.prcm = {
.omap4 = {
@@ -368,7 +368,7 @@ static struct omap_hwmod omap54xx_emif2_
.name = "emif2",
.class = &omap54xx_emif_hwmod_class,
.clkdm_name = "emif_clkdm",
- .flags = HWMOD_INIT_NO_IDLE | HWMOD_INIT_NO_RESET,
+ .flags = HWMOD_INIT_NO_IDLE,
.main_clk = "dpll_core_h11x2_ck",
.prcm = {
.omap4 = {
@@ -1135,7 +1135,7 @@ static struct omap_hwmod omap54xx_mpu_hw
.name = "mpu",
.class = &omap54xx_mpu_hwmod_class,
.clkdm_name = "mpu_clkdm",
- .flags = HWMOD_INIT_NO_IDLE | HWMOD_INIT_NO_RESET,
+ .flags = HWMOD_INIT_NO_IDLE,
.main_clk = "dpll_mpu_m2_ck",
.prcm = {
.omap4 = {

97
target/linux/omap/patches-3.12/201-ARM-dts-omap-Add-new-bindings-for-OMAP.patch
View File

@ -1,97 +0,0 @@
On OMAP we have co-processor IPs, memory controllers,
GPIOs which control regulators and power switches to
PMIC, and SoC internal Bus IPs, some or most of which
should either not be reset or idled or both at init.
(In some cases there are erratas which prevent an IP
from being reset)
Have a way to pass this information from DT.
Update the am33xx/omap4 and omap5 dtsi files with the
new bindings for modules which either should not be
idled. reset or both. A later patch would cleanup the
same information that exists today as part of the hwmod
data files.
Signed-off-by: Rajendra Nayak <rnayak@ti.com>
---
.../devicetree/bindings/arm/omap/omap.txt | 3 ++-
arch/arm/boot/dts/am33xx.dtsi | 2 ++
arch/arm/boot/dts/omap4.dtsi | 3 +++
arch/arm/boot/dts/omap5.dtsi | 2 ++
4 files changed, 9 insertions(+), 1 deletion(-)
--- a/Documentation/devicetree/bindings/arm/omap/omap.txt
+++ b/Documentation/devicetree/bindings/arm/omap/omap.txt
@@ -21,7 +21,8 @@ Required properties:
Optional properties:
- ti,no_idle_on_suspend: When present, it prevents the PM to idle the module
during suspend.
-
+- ti,no-reset-on-init: When present, the module should not be reset at init
+- ti,no-idle-on-init: When present, the module should not be idled at init
Example:
--- a/arch/arm/boot/dts/am33xx.dtsi
+++ b/arch/arm/boot/dts/am33xx.dtsi
@@ -667,6 +667,7 @@
reg = <0x44d00000 0x4000 /* M3 UMEM */
0x44d80000 0x2000>; /* M3 DMEM */
ti,hwmods = "wkup_m3";
+ ti,no-reset-on-init;
};
elm: elm@48080000 {
@@ -697,6 +698,7 @@
gpmc: gpmc@50000000 {
compatible = "ti,am3352-gpmc";
ti,hwmods = "gpmc";
+ ti,no-idle-on-init;
reg = <0x50000000 0x2000>;
interrupts = <100>;
gpmc,num-cs = <7>;
--- a/arch/arm/boot/dts/omap4.dtsi
+++ b/arch/arm/boot/dts/omap4.dtsi
@@ -214,6 +214,7 @@
gpmc,num-cs = <8>;
gpmc,num-waitpins = <4>;
ti,hwmods = "gpmc";
+ ti,no-idle-on-init;
};
uart1: serial@4806a000 {
@@ -492,6 +493,7 @@
reg = <0x4c000000 0x100>;
interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "emif1";
+ ti,no-idle-on-init;
phy-type = <1>;
hw-caps-read-idle-ctrl;
hw-caps-ll-interface;
@@ -503,6 +505,7 @@
reg = <0x4d000000 0x100>;
interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "emif2";
+ ti,no-idle-on-init;
phy-type = <1>;
hw-caps-read-idle-ctrl;
hw-caps-ll-interface;
--- a/arch/arm/boot/dts/omap5.dtsi
+++ b/arch/arm/boot/dts/omap5.dtsi
@@ -607,6 +607,7 @@
emif1: emif@0x4c000000 {
compatible = "ti,emif-4d5";
ti,hwmods = "emif1";
+ ti,no-idle-on-init;
phy-type = <2>; /* DDR PHY type: Intelli PHY */
reg = <0x4c000000 0x400>;
interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
@@ -618,6 +619,7 @@
emif2: emif@0x4d000000 {
compatible = "ti,emif-4d5";
ti,hwmods = "emif2";
+ ti,no-idle-on-init;
phy-type = <2>; /* DDR PHY type: Intelli PHY */
reg = <0x4d000000 0x400>;
interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>;

85
target/linux/omap/patches-3.12/202-ARM-OMAP2-hwmod-Extract-no-idle-and-no-reset-info-from-DT.patch
View File

@ -1,85 +0,0 @@
From f92d9597f781f6a5a39c73dc71604bd8a21c5299 Mon Sep 17 00:00:00 2001
From: Rajendra Nayak <rnayak@ti.com>
Date: Wed, 09 Oct 2013 07:26:55 +0000
Subject: ARM: OMAP2+: hwmod: Extract no-idle and no-reset info from DT
Now that we have DT bindings to specify which devices should not
be reset and idled during init, make hwmod extract the information
(and store them in internal flags) from Device tree.
Signed-off-by: Rajendra Nayak <rnayak@ti.com>
[paul@pwsan.com: updated to apply]
Signed-off-by: Paul Walmsley <paul@pwsan.com>
---
--- a/arch/arm/mach-omap2/omap_hwmod.c
+++ b/arch/arm/mach-omap2/omap_hwmod.c
@@ -2393,6 +2393,8 @@ static struct device_node *of_dev_hwmod_
/**
* _init_mpu_rt_base - populate the virtual address for a hwmod
* @oh: struct omap_hwmod * to locate the virtual address
+ * @data: (unused, caller should pass NULL)
+ * @np: struct device_node * of the IP block's device node in the DT data
*
* Cache the virtual address used by the MPU to access this IP block's
* registers. This address is needed early so the OCP registers that
@@ -2401,11 +2403,11 @@ static struct device_node *of_dev_hwmod_
* Returns 0 on success, -EINVAL if an invalid hwmod is passed, and
* -ENXIO on absent or invalid register target address space.
*/
-static int __init _init_mpu_rt_base(struct omap_hwmod *oh, void *data)
+static int __init _init_mpu_rt_base(struct omap_hwmod *oh, void *data,
+ struct device_node *np)
{
struct omap_hwmod_addr_space *mem;
void __iomem *va_start = NULL;
- struct device_node *np;
if (!oh)
return -EINVAL;
@@ -2421,12 +2423,10 @@ static int __init _init_mpu_rt_base(stru
oh->name);
/* Extract the IO space from device tree blob */
- if (!of_have_populated_dt())
+ if (!np)
return -ENXIO;
- np = of_dev_hwmod_lookup(of_find_node_by_name(NULL, "ocp"), oh);
- if (np)
- va_start = of_iomap(np, oh->mpu_rt_idx);
+ va_start = of_iomap(np, oh->mpu_rt_idx);
} else {
va_start = ioremap(mem->pa_start, mem->pa_end - mem->pa_start);
}
@@ -2459,12 +2459,16 @@ static int __init _init_mpu_rt_base(stru
static int __init _init(struct omap_hwmod *oh, void *data)
{
int r;
+ struct device_node *np = NULL;
if (oh->_state != _HWMOD_STATE_REGISTERED)
return 0;
+ if (of_have_populated_dt())
+ np = of_dev_hwmod_lookup(of_find_node_by_name(NULL, "ocp"), oh);
+
if (oh->class->sysc) {
- r = _init_mpu_rt_base(oh, NULL);
+ r = _init_mpu_rt_base(oh, NULL, np);
if (r < 0) {
WARN(1, "omap_hwmod: %s: doesn't have mpu register target base\n",
oh->name);
@@ -2478,6 +2482,12 @@ static int __init _init(struct omap_hwmo
return -EINVAL;
}
+ if (np)
+ if (of_find_property(np, "ti,no-reset-on-init", NULL))
+ oh->flags |= HWMOD_INIT_NO_RESET;
+ if (of_find_property(np, "ti,no-idle-on-init", NULL))
+ oh->flags |= HWMOD_INIT_NO_IDLE;
+
oh->_state = _HWMOD_STATE_INITIALIZED;
return 0;

86
target/linux/omap/patches-3.12/203-ARM-OMAP2-hwmod-Cleanup-usag~RESET-and-HWMOD_INIT_NO_IDLE.patch
View File

@ -1,86 +0,0 @@
With DT bindings to specify which devices should not be idled and reset
at init being in place, and the corresponding dtsi files for am33xx/omap4
and omap5 updated using those bindings, we can now clean up hwmod internal
flags for HWMOD_INIT_NO_RESET and HWMOD_INIT_NO_IDLE which were infact used
to specify the exact same information.
For GPMC, the HWMOD_INIT_NO_RESET flag seems to be added in hwmod not due to
any errata around the GPMC IP, but rather because any timings
set by the bootloader are not being correctly programmed by the kernel.
This seems like something that needs to be fixed as part of GPMC driver
in the kernel, and hence the flag is left as is in hwmod, which can be
removed once the driver does what its expected to.
Signed-off-by: Rajendra Nayak <rnayak@ti.com>
---
arch/arm/mach-omap2/omap_hwmod_33xx_data.c | 4 ++--
arch/arm/mach-omap2/omap_hwmod_44xx_data.c | 4 +---
arch/arm/mach-omap2/omap_hwmod_54xx_data.c | 2 --
3 files changed, 3 insertions(+), 7 deletions(-)
--- a/arch/arm/mach-omap2/omap_hwmod_33xx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_33xx_data.c
@@ -198,7 +198,7 @@ static struct omap_hwmod am33xx_wkup_m3_
.class = &am33xx_wkup_m3_hwmod_class,
.clkdm_name = "l4_wkup_aon_clkdm",
/* Keep hardreset asserted */
- .flags = HWMOD_INIT_NO_RESET | HWMOD_NO_IDLEST,
+ .flags = HWMOD_NO_IDLEST,
.main_clk = "dpll_core_m4_div2_ck",
.prcm = {
.omap4 = {
@@ -932,7 +932,7 @@ static struct omap_hwmod am33xx_gpmc_hwm
.name = "gpmc",
.class = &am33xx_gpmc_hwmod_class,
.clkdm_name = "l3s_clkdm",
- .flags = (HWMOD_INIT_NO_IDLE | HWMOD_INIT_NO_RESET),
+ .flags = HWMOD_INIT_NO_RESET,
.main_clk = "l3s_gclk",
.prcm = {
.omap4 = {
--- a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
@@ -914,7 +914,6 @@ static struct omap_hwmod omap44xx_emif1_
.name = "emif1",
.class = &omap44xx_emif_hwmod_class,
.clkdm_name = "l3_emif_clkdm",
- .flags = HWMOD_INIT_NO_IDLE,
.main_clk = "ddrphy_ck",
.prcm = {
.omap4 = {
@@ -930,7 +929,6 @@ static struct omap_hwmod omap44xx_emif2_
.name = "emif2",
.class = &omap44xx_emif_hwmod_class,
.clkdm_name = "l3_emif_clkdm",
- .flags = HWMOD_INIT_NO_IDLE,
.main_clk = "ddrphy_ck",
.prcm = {
.omap4 = {
@@ -1184,7 +1182,7 @@ static struct omap_hwmod omap44xx_gpmc_h
* the kernel from the board file or DT data.
* HWMOD_INIT_NO_RESET should be removed ASAP.
*/
- .flags = HWMOD_INIT_NO_IDLE | HWMOD_INIT_NO_RESET,
+ .flags = HWMOD_INIT_NO_RESET,
.prcm = {
.omap4 = {
.clkctrl_offs = OMAP4_CM_L3_2_GPMC_CLKCTRL_OFFSET,
--- a/arch/arm/mach-omap2/omap_hwmod_54xx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_54xx_data.c
@@ -352,7 +352,6 @@ static struct omap_hwmod omap54xx_emif1_
.name = "emif1",
.class = &omap54xx_emif_hwmod_class,
.clkdm_name = "emif_clkdm",
- .flags = HWMOD_INIT_NO_IDLE,
.main_clk = "dpll_core_h11x2_ck",
.prcm = {
.omap4 = {
@@ -368,7 +367,6 @@ static struct omap_hwmod omap54xx_emif2_
.name = "emif2",
.class = &omap54xx_emif_hwmod_class,
.clkdm_name = "emif_clkdm",
- .flags = HWMOD_INIT_NO_IDLE,
.main_clk = "dpll_core_h11x2_ck",
.prcm = {
.omap4 = {

22
target/linux/omap/patches-3.12/204-ARM-dts-AM335x-evmsk-Do-not-reset-gpio0.patch
View File

@ -1,22 +0,0 @@
Do not reset GPIO0 at boot-up because GPIO0 is used
on AM335x EVM-SK to control VTT regulators on DDR3.
Without this EVM-SK boards fail to boot-up because
of DDR3 corruption.
Signed-off-by: Rajendra Nayak <rnayak@ti.com>
---
arch/arm/boot/dts/am335x-evmsk.dts | 4 ++++
1 file changed, 4 insertions(+)
--- a/arch/arm/boot/dts/am335x-evmsk.dts
+++ b/arch/arm/boot/dts/am335x-evmsk.dts
@@ -426,3 +426,7 @@
status = "okay";
vmmc-supply = <&vmmc_reg>;
};
+
+&gpio0 {
+ ti,no-reset-on-init;
+};

97
target/linux/omap/patches-3.12/300-ARM-dts-AM33XX-Add-SHAM-data-and-documentation.patch
View File

@ -1,97 +0,0 @@
Add the generic AM33XX SHAM module's device tree data and
enable it for the am335x-evm, am335x-evmsk, and am335x-bone
platforms. Also add Documentation file describing the data
for the SHAM module.
[joelf@ti.com: Dropped interrupt-parrent property, documentation fixups]
CC: Paul Walmsley <paul@pwsan.com>
Signed-off-by: Mark A. Greer <mgreer@animalcreek.com>
Acked-by: Mark Rutland <mark.rutland@arm.com>
---
.../devicetree/bindings/crypto/omap-sham.txt | 28 ++++++++++++++++++++++
arch/arm/boot/dts/am335x-bone.dts | 4 ++++
arch/arm/boot/dts/am335x-evm.dts | 4 ++++
arch/arm/boot/dts/am335x-evmsk.dts | 4 ++++
arch/arm/boot/dts/am33xx.dtsi | 9 +++++++
5 files changed, 49 insertions(+)
create mode 100644 Documentation/devicetree/bindings/crypto/omap-sham.txt
--- /dev/null
+++ b/Documentation/devicetree/bindings/crypto/omap-sham.txt
@@ -0,0 +1,28 @@
+OMAP SoC SHA crypto Module
+
+Required properties:
+
+- compatible : Should contain entries for this and backward compatible
+ SHAM versions:
+ - "ti,omap2-sham" for OMAP2 & OMAP3.
+ - "ti,omap4-sham" for OMAP4 and AM33XX.
+ Note that these two versions are incompatible.
+- ti,hwmods: Name of the hwmod associated with the SHAM module
+- reg : Offset and length of the register set for the module
+- interrupts : the interrupt-specifier for the SHAM module.
+
+Optional properties:
+- dmas: DMA specifiers for the rx dma. See the DMA client binding,
+ Documentation/devicetree/bindings/dma/dma.txt
+- dma-names: DMA request name. Should be "rx" if a dma is present.
+
+Example:
+ /* AM335x */
+ sham: sham@53100000 {
+ compatible = "ti,omap4-sham";
+ ti,hwmods = "sham";
+ reg = <0x53100000 0x200>;
+ interrupts = <109>;
+ dmas = <&edma 36>;
+ dma-names = "rx";
+ };
--- a/arch/arm/boot/dts/am335x-bone.dts
+++ b/arch/arm/boot/dts/am335x-bone.dts
@@ -20,3 +20,7 @@
status = "okay";
vmmc-supply = <&ldo3_reg>;
};
+
+&sham {
+ status = "okay";
+};
--- a/arch/arm/boot/dts/am335x-evm.dts
+++ b/arch/arm/boot/dts/am335x-evm.dts
@@ -524,3 +524,7 @@
status = "okay";
vmmc-supply = <&vmmc_reg>;
};
+
+&sham {
+ status = "okay";
+};
--- a/arch/arm/boot/dts/am335x-evmsk.dts
+++ b/arch/arm/boot/dts/am335x-evmsk.dts
@@ -430,3 +430,7 @@
&gpio0 {
ti,no-reset-on-init;
};
+
+&sham {
+ status = "okay";
+};
--- a/arch/arm/boot/dts/am33xx.dtsi
+++ b/arch/arm/boot/dts/am33xx.dtsi
@@ -707,5 +707,14 @@
#size-cells = <1>;
status = "disabled";
};
+
+ sham: sham@53100000 {
+ compatible = "ti,omap4-sham";
+ ti,hwmods = "sham";
+ reg = <0x53100000 0x200>;
+ interrupts = <109>;
+ dmas = <&edma 36>;
+ dma-names = "rx";
+ };
};
};

101
target/linux/omap/patches-3.12/301-ARM-dts-AM33XX-Add-AES-data-and-documentation.patch
View File

@ -1,101 +0,0 @@
Add the generic AM33XX AES module's device tree data and
enable it for the am335x-evm, am335x-evmsk, and am335x-bone
platforms. Also add Documentation file describing the data
for the AES module.
[joelf@ti.com: Dropped interrupt-parent propert, documentation fixups]
CC: Paul Walmsley <paul@pwsan.com>
Signed-off-by: Mark A. Greer <mgreer@animalcreek.com>
---
.../devicetree/bindings/crypto/omap-aes.txt | 31 ++++++++++++++++++++++
arch/arm/boot/dts/am335x-bone.dts | 4 +++
arch/arm/boot/dts/am335x-evm.dts | 4 +++
arch/arm/boot/dts/am335x-evmsk.dts | 4 +++
arch/arm/boot/dts/am33xx.dtsi | 10 +++++++
5 files changed, 53 insertions(+)
create mode 100644 Documentation/devicetree/bindings/crypto/omap-aes.txt
--- /dev/null
+++ b/Documentation/devicetree/bindings/crypto/omap-aes.txt
@@ -0,0 +1,31 @@
+OMAP SoC AES crypto Module
+
+Required properties:
+
+- compatible : Should contain entries for this and backward compatible
+ AES versions:
+ - "ti,omap2-aes" for OMAP2.
+ - "ti,omap3-aes" for OMAP3.
+ - "ti,omap4-aes" for OMAP4 and AM33XX.
+ Note that the OMAP2 and 3 versions are compatible (OMAP3 supports
+ more algorithms) but they are incompatible with OMAP4.
+- ti,hwmods: Name of the hwmod associated with the AES module
+- reg : Offset and length of the register set for the module
+- interrupts : the interrupt-specifier for the AES module.
+
+Optional properties:
+- dmas: DMA specifiers for tx and rx dma. See the DMA client binding,
+ Documentation/devicetree/bindings/dma/dma.txt
+- dma-names: DMA request names should include "tx" and "rx" if present.
+
+Example:
+ /* AM335x */
+ aes: aes@53500000 {
+ compatible = "ti,omap4-aes";
+ ti,hwmods = "aes";
+ reg = <0x53500000 0xa0>;
+ interrupts = <102>;
+ dmas = <&edma 6>,
+ <&edma 5>;
+ dma-names = "tx", "rx";
+ };
--- a/arch/arm/boot/dts/am335x-bone.dts
+++ b/arch/arm/boot/dts/am335x-bone.dts
@@ -24,3 +24,7 @@
&sham {
status = "okay";
};
+
+&aes {
+ status = "okay";
+};
--- a/arch/arm/boot/dts/am335x-evm.dts
+++ b/arch/arm/boot/dts/am335x-evm.dts
@@ -528,3 +528,7 @@
&sham {
status = "okay";
};
+
+&aes {
+ status = "okay";
+};
--- a/arch/arm/boot/dts/am335x-evmsk.dts
+++ b/arch/arm/boot/dts/am335x-evmsk.dts
@@ -434,3 +434,7 @@
&sham {
status = "okay";
};
+
+&aes {
+ status = "okay";
+};
--- a/arch/arm/boot/dts/am33xx.dtsi
+++ b/arch/arm/boot/dts/am33xx.dtsi
@@ -716,5 +716,15 @@
dmas = <&edma 36>;
dma-names = "rx";
};
+
+ aes: aes@53500000 {
+ compatible = "ti,omap4-aes";
+ ti,hwmods = "aes";
+ reg = <0x53500000 0xa0>;
+ interrupts = <102>;
+ dmas = <&edma 6>,
+ <&edma 5>;
+ dma-names = "tx", "rx";
+ };
};
};

21
target/linux/omap/patches-3.12/302-ARM-dts-AM33XX-Fix-AES-interrupt-number.patch
View File

@ -1,21 +0,0 @@
AES interrupts were previously not used, but after recent changes to omap-aes
driver, its being used. We correct the interrupt number to have working PIO
mode.
Signed-off-by: Joel Fernandes <joelf@ti.com>
---
arch/arm/boot/dts/am33xx.dtsi | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/arch/arm/boot/dts/am33xx.dtsi
+++ b/arch/arm/boot/dts/am33xx.dtsi
@@ -721,7 +721,7 @@
compatible = "ti,omap4-aes";
ti,hwmods = "aes";
reg = <0x53500000 0xa0>;
- interrupts = <102>;
+ interrupts = <103>;
dmas = <&edma 6>,
<&edma 5>;
dma-names = "tx", "rx";

62
target/linux/omap/patches-3.12/350-ARM-AM33xx-hwmod-Add-RNG-module-data.patch
View File

@ -1,62 +0,0 @@
Add RNG hwmod data for AM33xx SoC.
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
---
* Made am33xx_l4_per__rng structure as static to fix sparse warning
arch/arm/mach-omap2/omap_hwmod_33xx_data.c | 36 ++++++++++++++++++++++++++++
1 file changed, 36 insertions(+)
--- a/arch/arm/mach-omap2/omap_hwmod_33xx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_33xx_data.c
@@ -2480,6 +2480,41 @@ static struct omap_hwmod_ocp_if am33xx_l
.user = OCP_USER_MPU | OCP_USER_SDMA,
};
+/* rng */
+static struct omap_hwmod_class_sysconfig am33xx_rng_sysc = {
+ .rev_offs = 0x1fe0,
+ .sysc_offs = 0x1fe4,
+ .sysc_flags = SYSC_HAS_AUTOIDLE | SYSC_HAS_SIDLEMODE,
+ .idlemodes = SIDLE_FORCE | SIDLE_NO,
+ .sysc_fields = &omap_hwmod_sysc_type1,
+};
+
+static struct omap_hwmod_class am33xx_rng_hwmod_class = {
+ .name = "rng",
+ .sysc = &am33xx_rng_sysc,
+};
+
+static struct omap_hwmod am33xx_rng_hwmod = {
+ .name = "rng",
+ .class = &am33xx_rng_hwmod_class,
+ .clkdm_name = "l4ls_clkdm",
+ .flags = HWMOD_SWSUP_SIDLE,
+ .main_clk = "rng_fck",
+ .prcm = {
+ .omap4 = {
+ .clkctrl_offs = AM33XX_CM_PER_RNG_CLKCTRL_OFFSET,
+ .modulemode = MODULEMODE_SWCTRL,
+ },
+ },
+};
+
+static struct omap_hwmod_ocp_if am33xx_l4_per__rng = {
+ .master = &am33xx_l4_ls_hwmod,
+ .slave = &am33xx_rng_hwmod,
+ .clk = "rng_fck",
+ .user = OCP_USER_MPU,
+};
+
static struct omap_hwmod_ocp_if *am33xx_hwmod_ocp_ifs[] __initdata = {
&am33xx_l3_main__emif,
&am33xx_mpu__l3_main,
@@ -2559,6 +2594,7 @@ static struct omap_hwmod_ocp_if *am33xx_
&am33xx_cpgmac0__mdio,
&am33xx_l3_main__sha0,
&am33xx_l3_main__aes0,
+ &am33xx_l4_per__rng,
NULL,
};

145
target/linux/omap/patches-3.12/400-ASoC-davinci-evm-Move-sysclk-logic-away-from-evm_hw_.patch
View File

@ -1,145 +0,0 @@
From 13254d51149ce1a0fdbb38fa229c6cc91bcbe6ec Mon Sep 17 00:00:00 2001
From: Jyri Sarha <jsarha@ti.com>
Date: Fri, 13 Sep 2013 17:43:18 +0300
Subject: [PATCH 211/752] ASoC: davinci-evm: Move sysclk logic away from
evm_hw_params
The sysclk rate does not change runtime so it should be initialized at
init time.
Signed-off-by: Jyri Sarha <jsarha@ti.com>
---
sound/soc/davinci/davinci-evm.c | 64 +++++++++++++++++++++++++++------------
1 file changed, 44 insertions(+), 20 deletions(-)
--- a/sound/soc/davinci/davinci-evm.c
+++ b/sound/soc/davinci/davinci-evm.c
@@ -27,6 +27,10 @@
#include "davinci-i2s.h"
#include "davinci-mcasp.h"
+struct snd_soc_card_drvdata_davinci {
+ unsigned sysclk;
+};
+
#define AUDIO_FORMAT (SND_SOC_DAIFMT_DSP_B | \
SND_SOC_DAIFMT_CBM_CFM | SND_SOC_DAIFMT_IB_NF)
static int evm_hw_params(struct snd_pcm_substream *substream,
@@ -35,27 +39,11 @@ static int evm_hw_params(struct snd_pcm_
struct snd_soc_pcm_runtime *rtd = substream->private_data;
struct snd_soc_dai *codec_dai = rtd->codec_dai;
struct snd_soc_dai *cpu_dai = rtd->cpu_dai;
+ struct snd_soc_codec *codec = rtd->codec;
+ struct snd_soc_card *soc_card = codec->card;
int ret = 0;
- unsigned sysclk;
-
- /* ASP1 on DM355 EVM is clocked by an external oscillator */
- if (machine_is_davinci_dm355_evm() || machine_is_davinci_dm6467_evm() ||
- machine_is_davinci_dm365_evm())
- sysclk = 27000000;
-
- /* ASP0 in DM6446 EVM is clocked by U55, as configured by
- * board-dm644x-evm.c using GPIOs from U18. There are six
- * options; here we "know" we use a 48 KHz sample rate.
- */
- else if (machine_is_davinci_evm())
- sysclk = 12288000;
-
- else if (machine_is_davinci_da830_evm() ||
- machine_is_davinci_da850_evm())
- sysclk = 24576000;
-
- else
- return -EINVAL;
+ unsigned sysclk = ((struct snd_soc_card_drvdata_davinci *)
+ snd_soc_card_get_drvdata(soc_card))->sysclk;
/* set codec DAI configuration */
ret = snd_soc_dai_set_fmt(codec_dai, AUDIO_FORMAT);
@@ -243,35 +231,65 @@ static struct snd_soc_dai_link da850_evm
};
/* davinci dm6446 evm audio machine driver */
+/*
+ * ASP0 in DM6446 EVM is clocked by U55, as configured by
+ * board-dm644x-evm.c using GPIOs from U18. There are six
+ * options; here we "know" we use a 48 KHz sample rate.
+ */
+static struct snd_soc_card_drvdata_davinci dm6446_snd_soc_card_drvdata = {
+ .sysclk = 12288000,
+};
+
static struct snd_soc_card dm6446_snd_soc_card_evm = {
.name = "DaVinci DM6446 EVM",
.owner = THIS_MODULE,
.dai_link = &dm6446_evm_dai,
.num_links = 1,
+ .drvdata = &dm6446_snd_soc_card_drvdata,
};
/* davinci dm355 evm audio machine driver */
+/* ASP1 on DM355 EVM is clocked by an external oscillator */
+static struct snd_soc_card_drvdata_davinci dm355_snd_soc_card_drvdata = {
+ .sysclk = 27000000,
+};
+
static struct snd_soc_card dm355_snd_soc_card_evm = {
.name = "DaVinci DM355 EVM",
.owner = THIS_MODULE,
.dai_link = &dm355_evm_dai,
.num_links = 1,
+ .drvdata = &dm355_snd_soc_card_drvdata,
};
/* davinci dm365 evm audio machine driver */
+static struct snd_soc_card_drvdata_davinci dm365_snd_soc_card_drvdata = {
+ .sysclk = 27000000,
+};
+
static struct snd_soc_card dm365_snd_soc_card_evm = {
.name = "DaVinci DM365 EVM",
.owner = THIS_MODULE,
.dai_link = &dm365_evm_dai,
.num_links = 1,
+ .drvdata = &dm365_snd_soc_card_drvdata,
};
/* davinci dm6467 evm audio machine driver */
+static struct snd_soc_card_drvdata_davinci dm6467_snd_soc_card_drvdata = {
+ .sysclk = 27000000,
+};
+
static struct snd_soc_card dm6467_snd_soc_card_evm = {
.name = "DaVinci DM6467 EVM",
.owner = THIS_MODULE,
.dai_link = dm6467_evm_dai,
.num_links = ARRAY_SIZE(dm6467_evm_dai),
+ .drvdata = &dm6467_snd_soc_card_drvdata,
+};
+
+static struct snd_soc_card_drvdata_davinci da830_snd_soc_card_drvdata = {
+ .sysclk = 24576000,
};
static struct snd_soc_card da830_snd_soc_card = {
@@ -279,6 +297,11 @@ static struct snd_soc_card da830_snd_soc
.owner = THIS_MODULE,
.dai_link = &da830_evm_dai,
.num_links = 1,
+ .drvdata = &da830_snd_soc_card_drvdata,
+};
+
+static struct snd_soc_card_drvdata_davinci da850_snd_soc_card_drvdata = {
+ .sysclk = 24576000,
};
static struct snd_soc_card da850_snd_soc_card = {
@@ -286,6 +309,7 @@ static struct snd_soc_card da850_snd_soc
.owner = THIS_MODULE,
.dai_link = &da850_evm_dai,
.num_links = 1,
+ .drvdata = &da850_snd_soc_card_drvdata,
};
static struct platform_device *evm_snd_device;

253
target/linux/omap/patches-3.12/401-ASoC-davinci-evm-Add-device-tree-binding.patch
View File

@ -1,253 +0,0 @@
From af9ef849e8700327b807361344427a43c38e823a Mon Sep 17 00:00:00 2001
From: "Hebbar, Gururaja" <gururaja.hebbar@ti.com>
Date: Tue, 31 Jul 2012 21:25:38 +0530
Subject: [PATCH 212/752] ASoC: davinci-evm: Add device tree binding
Device tree support for Davinci Machine driver
When the board boots with device tree, the driver will receive card,
codec, dai interface details (like the card name, DAPM routing map,
phandle for the audio components described in the dts file, codec mclk
speed). The card will be set up based on this information. Since the
routing is provided via DT we can mark the card fully routed so core
can take care of disconnecting the unused pins.
Signed-off-by: Hebbar, Gururaja <gururaja.hebbar@ti.com>
Signed-off-by: Darren Etheridge <detheridge@ti.com>
Signed-off-by: Jyri Sarha <jsarha@ti.com>
---
.../bindings/sound/davinci-evm-audio.txt | 58 ++++++++++
sound/soc/davinci/davinci-evm.c | 120 +++++++++++++++++++-
2 files changed, 176 insertions(+), 2 deletions(-)
create mode 100644 Documentation/devicetree/bindings/sound/davinci-evm-audio.txt
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/davinci-evm-audio.txt
@@ -0,0 +1,58 @@
+* Texas Instruments SoC audio setups with TLV320AIC3X Codec
+
+Required properties:
+- compatible : "ti,da830-evm-audio" : forDM365/DA8xx/OMAPL1x/AM33xx
+- ti,model : The user-visible name of this sound complex.
+- ti,audio-codec : The phandle of the TLV320AIC3x audio codec
+- ti,mcasp-controller : The phandle of the McASP controller
+- ti,codec-clock-rate : The Codec Clock rate (in Hz) applied to the Codec
+- ti,audio-routing : A list of the connections between audio components.
+ Each entry is a pair of strings, the first being the connection's sink,
+ the second being the connection's source. Valid names for sources and
+ sinks are the codec's pins, and the jacks on the board:
+
+ TLV320AIC3X pins:
+
+ * LLOUT
+ * RLOUT
+ * MONO_LOUT
+ * HPLOUT
+ * HPROUT
+ * HPLCOM
+ * HPRCOM
+ * MIC3L
+ * MIC3R
+ * LINE1L
+ * LINE2L
+ * LINE1R
+ * LINE2R
+
+ Board connectors:
+
+ * Headphone Jack
+ * Line Out
+ * Mic Jack
+ * Line In
+
+
+Example:
+
+sound {
+ compatible = "ti,da830-evm-audio";
+ ti,model = "DA830 EVM";
+ ti,audio-codec = <&tlv320aic3x>;
+ ti,mcasp-controller = <&mcasp1>;
+ ti,codec-clock-rate = <12000000>;
+ ti,audio-routing =
+ "Headphone Jack", "HPLOUT",
+ "Headphone Jack", "HPROUT",
+ "Line Out", "LLOUT",
+ "Line Out", "RLOUT",
+ "MIC3L", "Mic Bias 2V",
+ "MIC3R", "Mic Bias 2V",
+ "Mic Bias 2V", "Mic Jack",
+ "LINE1L", "Line In",
+ "LINE2L", "Line In",
+ "LINE1R", "Line In",
+ "LINE2R", "Line In";
+};
--- a/sound/soc/davinci/davinci-evm.c
+++ b/sound/soc/davinci/davinci-evm.c
@@ -16,6 +16,7 @@
#include <linux/platform_device.h>
#include <linux/platform_data/edma.h>
#include <linux/i2c.h>
+#include <linux/of_platform.h>
#include <sound/core.h>
#include <sound/pcm.h>
#include <sound/soc.h>
@@ -23,6 +24,8 @@
#include <asm/dma.h>
#include <asm/mach-types.h>
+#include <linux/edma.h>
+
#include "davinci-pcm.h"
#include "davinci-i2s.h"
#include "davinci-mcasp.h"
@@ -121,13 +124,22 @@ static int evm_aic3x_init(struct snd_soc
{
struct snd_soc_codec *codec = rtd->codec;
struct snd_soc_dapm_context *dapm = &codec->dapm;
+ struct device_node *np = codec->card->dev->of_node;
+ int ret;
/* Add davinci-evm specific widgets */
snd_soc_dapm_new_controls(dapm, aic3x_dapm_widgets,
ARRAY_SIZE(aic3x_dapm_widgets));
- /* Set up davinci-evm specific audio path audio_map */
- snd_soc_dapm_add_routes(dapm, audio_map, ARRAY_SIZE(audio_map));
+ if (np) {
+ ret = snd_soc_of_parse_audio_routing(codec->card,
+ "ti,audio-routing");
+ if (ret)
+ return ret;
+ } else {
+ /* Set up davinci-evm specific audio path audio_map */
+ snd_soc_dapm_add_routes(dapm, audio_map, ARRAY_SIZE(audio_map));
+ }
/* not connected */
snd_soc_dapm_disable_pin(dapm, "MONO_LOUT");
@@ -312,6 +324,98 @@ static struct snd_soc_card da850_snd_soc
.drvdata = &da850_snd_soc_card_drvdata,
};
+#if defined(CONFIG_OF)
+
+/*
+ * The struct is used as place holder. It will be completely
+ * filled with data from dt node.
+ */
+static struct snd_soc_dai_link evm_dai_tlv320aic3x = {
+ .name = "TLV320AIC3X",
+ .stream_name = "AIC3X",
+ .codec_dai_name = "tlv320aic3x-hifi",
+ .ops = &evm_ops,
+ .init = evm_aic3x_init,
+};
+
+static const struct of_device_id davinci_evm_dt_ids[] = {
+ {
+ .compatible = "ti,da830-evm-audio",
+ .data = (void *) &evm_dai_tlv320aic3x,
+ },
+ { /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, davinci_evm_dt_ids);
+
+/* davinci evm audio machine driver */
+static struct snd_soc_card evm_soc_card = {
+ .owner = THIS_MODULE,
+ .num_links = 1,
+};
+
+static int davinci_evm_probe(struct platform_device *pdev)
+{
+ struct device_node *np = pdev->dev.of_node;
+ const struct of_device_id *match =
+ of_match_device(of_match_ptr(davinci_evm_dt_ids), &pdev->dev);
+ struct snd_soc_dai_link *dai = (struct snd_soc_dai_link *) match->data;
+ struct snd_soc_card_drvdata_davinci *drvdata = NULL;
+ int ret = 0;
+
+ evm_soc_card.dai_link = dai;
+
+ dai->codec_of_node = of_parse_phandle(np, "ti,audio-codec", 0);
+ if (!dai->codec_of_node)
+ return -EINVAL;
+
+ dai->cpu_of_node = of_parse_phandle(np, "ti,mcasp-controller", 0);
+ if (!dai->cpu_of_node)
+ return -EINVAL;
+
+ dai->platform_of_node = dai->cpu_of_node;
+
+ evm_soc_card.dev = &pdev->dev;
+ ret = snd_soc_of_parse_card_name(&evm_soc_card, "ti,model");
+ if (ret)
+ return ret;
+
+ drvdata = devm_kzalloc(&pdev->dev, sizeof(*drvdata), GFP_KERNEL);
+ if (!drvdata)
+ return -ENOMEM;
+
+ ret = of_property_read_u32(np, "ti,codec-clock-rate", &drvdata->sysclk);
+ if (ret < 0)
+ return -EINVAL;
+
+ snd_soc_card_set_drvdata(&evm_soc_card, drvdata);
+ ret = snd_soc_register_card(&evm_soc_card);
+
+ if (ret)
+ dev_err(&pdev->dev, "snd_soc_register_card failed (%d)\n", ret);
+
+ return ret;
+}
+
+static int davinci_evm_remove(struct platform_device *pdev)
+{
+ struct snd_soc_card *card = platform_get_drvdata(pdev);
+
+ snd_soc_unregister_card(card);
+
+ return 0;
+}
+
+static struct platform_driver davinci_evm_driver = {
+ .probe = davinci_evm_probe,
+ .remove = davinci_evm_remove,
+ .driver = {
+ .name = "davinci_evm",
+ .owner = THIS_MODULE,
+ .of_match_table = of_match_ptr(davinci_evm_dt_ids),
+ },
+};
+#endif
+
static struct platform_device *evm_snd_device;
static int __init evm_init(void)
@@ -320,6 +424,13 @@ static int __init evm_init(void)
int index;
int ret;
+ /*
+ * If dtb is there, the devices will be created dynamically.
+ * Only register platfrom driver structure.
+ */
+ if (of_have_populated_dt())
+ return platform_driver_register(&davinci_evm_driver);
+
if (machine_is_davinci_evm()) {
evm_snd_dev_data = &dm6446_snd_soc_card_evm;
index = 0;
@@ -355,6 +466,11 @@ static int __init evm_init(void)
static void __exit evm_exit(void)
{
+ if (of_have_populated_dt()) {
+ platform_driver_unregister(&davinci_evm_driver);
+ return;
+ }
+
platform_device_unregister(evm_snd_device);
}

171
target/linux/omap/patches-3.12/402-ASoC-davinci-mcasp-Add-DMA-register-locations-to-DT.patch
View File

@ -1,171 +0,0 @@
From fb2002dbc326d2e408698038b668b19741567a48 Mon Sep 17 00:00:00 2001
From: Jyri Sarha <jsarha@ti.com>
Date: Fri, 6 Sep 2013 12:15:00 +0300
Subject: [PATCH 213/752] ASoC: davinci-mcasp: Add DMA register locations to
DT
This patch adds DMA register location to mcasp DT bindings. On am33xx
SoCs the McASP registers are mapped trough L4 interconnect, which is
not accessible by the DMA controller, so McASP data port is mapped
trough L3 to a different location.
Signed-off-by: Hebbar, Gururaja <gururaja.hebbar@ti.com>
Signed-off-by: Darren Etheridge <detheridge@ti.com>
Signed-off-by: Jyri Sarha <jsarha@ti.com>
---
.../bindings/sound/davinci-mcasp-audio.txt | 8 ++-
sound/soc/davinci/davinci-mcasp.c | 59 +++++++++++++-------
2 files changed, 46 insertions(+), 21 deletions(-)
--- a/Documentation/devicetree/bindings/sound/davinci-mcasp-audio.txt
+++ b/Documentation/devicetree/bindings/sound/davinci-mcasp-audio.txt
@@ -6,7 +6,11 @@ Required properties:
"ti,da830-mcasp-audio" : for both DA830 & DA850 platforms
"ti,omap2-mcasp-audio" : for OMAP2 platforms (TI81xx, AM33xx)
-- reg : Should contain McASP registers offset and length
+- reg : Should contain McASP registers address and length for mpu and
+ optionally for dma controller access.
+- reg-names : The mandatory reg-range must be named "mpu" and the optional DMA
+ reg-range must be named "dma". For backward compatibility it is
+ good to keep "mpu" first in the list.
- interrupts : Interrupt number for McASP
- op-mode : I2S/DIT ops mode.
- tdm-slots : Slots for TDM operation.
@@ -15,7 +19,6 @@ Required properties:
to "num-serializer" parameter. Each entry is a number indication
serializer pin direction. (0 - INACTIVE, 1 - TX, 2 - RX)
-
Optional properties:
- ti,hwmods : Must be "mcasp<n>", n is controller instance starting 0
@@ -31,6 +34,7 @@ mcasp0: mcasp0@1d00000 {
#address-cells = <1>;
#size-cells = <0>;
reg = <0x100000 0x3000>;
+ reg-names "mpu";
interrupts = <82 83>;
op-mode = <0>; /* MCASP_IIS_MODE */
tdm-slots = <2>;
--- a/sound/soc/davinci/davinci-mcasp.c
+++ b/sound/soc/davinci/davinci-mcasp.c
@@ -1001,18 +1001,40 @@ static const struct snd_soc_component_dr
.name = "davinci-mcasp",
};
+/* Some HW specific values and defaults. The rest is filled in from DT. */
+static struct snd_platform_data dm646x_mcasp_pdata = {
+ .tx_dma_offset = 0x400,
+ .rx_dma_offset = 0x400,
+ .asp_chan_q = EVENTQ_0,
+ .version = MCASP_VERSION_1,
+};
+
+static struct snd_platform_data da830_mcasp_pdata = {
+ .tx_dma_offset = 0x2000,
+ .rx_dma_offset = 0x2000,
+ .asp_chan_q = EVENTQ_0,
+ .version = MCASP_VERSION_2,
+};
+
+static struct snd_platform_data omap2_mcasp_pdata = {
+ .tx_dma_offset = 0,
+ .rx_dma_offset = 0,
+ .asp_chan_q = EVENTQ_0,
+ .version = MCASP_VERSION_3,
+};
+
static const struct of_device_id mcasp_dt_ids[] = {
{
.compatible = "ti,dm646x-mcasp-audio",
- .data = (void *)MCASP_VERSION_1,
+ .data = &dm646x_mcasp_pdata,
},
{
.compatible = "ti,da830-mcasp-audio",
- .data = (void *)MCASP_VERSION_2,
+ .data = &da830_mcasp_pdata,
},
{
.compatible = "ti,omap2-mcasp-audio",
- .data = (void *)MCASP_VERSION_3,
+ .data = &omap2_mcasp_pdata,
},
{ /* sentinel */ }
};
@@ -1035,20 +1057,13 @@ static struct snd_platform_data *davinci
pdata = pdev->dev.platform_data;
return pdata;
} else if (match) {
- pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL);
- if (!pdata) {
- ret = -ENOMEM;
- goto nodata;
- }
+ pdata = (struct snd_platform_data *) match->data;
} else {
/* control shouldn't reach here. something is wrong */
ret = -EINVAL;
goto nodata;
}
- if (match->data)
- pdata->version = (u8)((int)match->data);
-
ret = of_property_read_u32(np, "op-mode", &val);
if (ret >= 0)
pdata->op_mode = val;
@@ -1145,10 +1160,15 @@ static int davinci_mcasp_probe(struct pl
return -EINVAL;
}
- mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ mem = platform_get_resource_byname(pdev, IORESOURCE_MEM, "mpu");
if (!mem) {
- dev_err(&pdev->dev, "no mem resource?\n");
- return -ENODEV;
+ dev_warn(dev->dev,
+ "\"mpu\" mem resource not found, using index 0\n");
+ mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!mem) {
+ dev_err(&pdev->dev, "no mem resource?\n");
+ return -ENODEV;
+ }
}
ioarea = devm_request_mem_region(&pdev->dev, mem->start,
@@ -1182,13 +1202,16 @@ static int davinci_mcasp_probe(struct pl
dev->rxnumevt = pdata->rxnumevt;
dev->dev = &pdev->dev;
+ dma = platform_get_resource_byname(pdev, IORESOURCE_MEM, "dma");
+ if (!dma)
+ dma = mem;
+
dma_data = &dev->dma_params[SNDRV_PCM_STREAM_PLAYBACK];
dma_data->asp_chan_q = pdata->asp_chan_q;
dma_data->ram_chan_q = pdata->ram_chan_q;
dma_data->sram_pool = pdata->sram_pool;
dma_data->sram_size = pdata->sram_size_playback;
- dma_data->dma_addr = (dma_addr_t) (pdata->tx_dma_offset +
- mem->start);
+ dma_data->dma_addr = dma->start + pdata->tx_dma_offset;
/* first TX, then RX */
res = platform_get_resource(pdev, IORESOURCE_DMA, 0);
@@ -1205,8 +1228,7 @@ static int davinci_mcasp_probe(struct pl
dma_data->ram_chan_q = pdata->ram_chan_q;
dma_data->sram_pool = pdata->sram_pool;
dma_data->sram_size = pdata->sram_size_capture;
- dma_data->dma_addr = (dma_addr_t)(pdata->rx_dma_offset +
- mem->start);
+ dma_data->dma_addr = dma->start + pdata->rx_dma_offset;
res = platform_get_resource(pdev, IORESOURCE_DMA, 1);
if (!res) {
@@ -1266,4 +1288,3 @@ module_platform_driver(davinci_mcasp_dri
MODULE_AUTHOR("Steve Chen");
MODULE_DESCRIPTION("TI DAVINCI McASP SoC Interface");
MODULE_LICENSE("GPL");
-

128
target/linux/omap/patches-3.12/403-ASoC-davinci-mcasp-Extract-DMA-channels-directly-fro.patch
View File

@ -1,128 +0,0 @@
From ad5d3e5a1218a599ec02c81a3bd599acedeea00f Mon Sep 17 00:00:00 2001
From: Jyri Sarha <jsarha@ti.com>
Date: Tue, 17 Sep 2013 12:09:30 +0300
Subject: [PATCH 214/752] ASoC: davinci-mcasp: Extract DMA channels directly
from DT
Extract DMA channels directly from DT as they can not be found from
platform resources anymore. This is a work-around until davinci audio
driver is updated to use dmaengine.
Signed-off-by: Jyri Sarha <jsarha@ti.com>
---
.../bindings/sound/davinci-mcasp-audio.txt | 5 +++
include/linux/platform_data/davinci_asp.h | 2 +
sound/soc/davinci/davinci-mcasp.c | 47 +++++++++++++-------
3 files changed, 39 insertions(+), 15 deletions(-)
--- a/Documentation/devicetree/bindings/sound/davinci-mcasp-audio.txt
+++ b/Documentation/devicetree/bindings/sound/davinci-mcasp-audio.txt
@@ -18,6 +18,11 @@ Required properties:
- serial-dir : A list of serializer pin mode. The list number should be equal
to "num-serializer" parameter. Each entry is a number indication
serializer pin direction. (0 - INACTIVE, 1 - TX, 2 - RX)
+- dmas: two element list of DMA controller phandles and DMA request line
+ ordered pairs.
+- dma-names: identifier string for each DMA request line in the dmas property.
+ These strings correspond 1:1 with the ordered pairs in dmas. The dma
+ identifiers must be "rx" and "tx".
Optional properties:
--- a/include/linux/platform_data/davinci_asp.h
+++ b/include/linux/platform_data/davinci_asp.h
@@ -84,6 +84,8 @@ struct snd_platform_data {
u8 version;
u8 txnumevt;
u8 rxnumevt;
+ int tx_dma_channel;
+ int rx_dma_channel;
};
enum {
--- a/sound/soc/davinci/davinci-mcasp.c
+++ b/sound/soc/davinci/davinci-mcasp.c
@@ -1047,6 +1047,7 @@ static struct snd_platform_data *davinci
struct snd_platform_data *pdata = NULL;
const struct of_device_id *match =
of_match_device(mcasp_dt_ids, &pdev->dev);
+ struct of_phandle_args dma_spec;
const u32 *of_serial_dir32;
u8 *of_serial_dir;
@@ -1109,6 +1110,28 @@ static struct snd_platform_data *davinci
pdata->serial_dir = of_serial_dir;
}
+ ret = of_property_match_string(np, "dma-names", "tx");
+ if (ret < 0)
+ goto nodata;
+
+ ret = of_parse_phandle_with_args(np, "dmas", "#dma-cells", ret,
+ &dma_spec);
+ if (ret < 0)
+ goto nodata;
+
+ pdata->tx_dma_channel = dma_spec.args[0];
+
+ ret = of_property_match_string(np, "dma-names", "rx");
+ if (ret < 0)
+ goto nodata;
+
+ ret = of_parse_phandle_with_args(np, "dmas", "#dma-cells", ret,
+ &dma_spec);
+ if (ret < 0)
+ goto nodata;
+
+ pdata->rx_dma_channel = dma_spec.args[0];
+
ret = of_property_read_u32(np, "tx-num-evt", &val);
if (ret >= 0)
pdata->txnumevt = val;
@@ -1139,7 +1162,7 @@ nodata:
static int davinci_mcasp_probe(struct platform_device *pdev)
{
struct davinci_pcm_dma_params *dma_data;
- struct resource *mem, *ioarea, *res;
+ struct resource *mem, *ioarea, *res, *dma;
struct snd_platform_data *pdata;
struct davinci_audio_dev *dev;
int ret;
@@ -1213,15 +1236,11 @@ static int davinci_mcasp_probe(struct pl
dma_data->sram_size = pdata->sram_size_playback;
dma_data->dma_addr = dma->start + pdata->tx_dma_offset;
- /* first TX, then RX */
res = platform_get_resource(pdev, IORESOURCE_DMA, 0);
- if (!res) {
- dev_err(&pdev->dev, "no DMA resource\n");
- ret = -ENODEV;
- goto err_release_clk;
- }
-
- dma_data->channel = res->start;
+ if (res)
+ dma_data->channel = res->start;
+ else
+ dma_data->channel = pdata->tx_dma_channel;
dma_data = &dev->dma_params[SNDRV_PCM_STREAM_CAPTURE];
dma_data->asp_chan_q = pdata->asp_chan_q;
@@ -1231,13 +1250,11 @@ static int davinci_mcasp_probe(struct pl
dma_data->dma_addr = dma->start + pdata->rx_dma_offset;
res = platform_get_resource(pdev, IORESOURCE_DMA, 1);
- if (!res) {
- dev_err(&pdev->dev, "no DMA resource\n");
- ret = -ENODEV;
- goto err_release_clk;
- }
+ if (res)
+ dma_data->channel = res->start;
+ else
+ dma_data->channel = pdata->rx_dma_channel;
- dma_data->channel = res->start;
dev_set_drvdata(&pdev->dev, dev);
ret = snd_soc_register_component(&pdev->dev, &davinci_mcasp_component,
&davinci_mcasp_dai[pdata->op_mode], 1);

42
target/linux/omap/patches-3.12/404-ASoC-davinci-mcasp-Interrupts-property-to-optional-a.patch
View File

@ -1,42 +0,0 @@
From 0ecb275625447180dd615256d0c324a0c0c6e76a Mon Sep 17 00:00:00 2001
From: Jyri Sarha <jsarha@ti.com>
Date: Thu, 19 Sep 2013 13:20:26 +0300
Subject: [PATCH 215/752] ASoC: davinci-mcasp: Interrupts property to optional
and add interrupt-names
Makes interrupts property optional as the interrupts are not currently
used by the driver and adds interrupt-names property to name listed
interrupts. Currently know interrupt names are "tx" and "rx".
Signed-off-by: Jyri Sarha <jsarha@ti.com>
---
Documentation/devicetree/bindings/sound/davinci-mcasp-audio.txt | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
--- a/Documentation/devicetree/bindings/sound/davinci-mcasp-audio.txt
+++ b/Documentation/devicetree/bindings/sound/davinci-mcasp-audio.txt
@@ -11,7 +11,6 @@ Required properties:
- reg-names : The mandatory reg-range must be named "mpu" and the optional DMA
reg-range must be named "dma". For backward compatibility it is
good to keep "mpu" first in the list.
-- interrupts : Interrupt number for McASP
- op-mode : I2S/DIT ops mode.
- tdm-slots : Slots for TDM operation.
- num-serializer : Serializers used by McASP.
@@ -31,6 +30,8 @@ Optional properties:
- rx-num-evt : FIFO levels.
- sram-size-playback : size of sram to be allocated during playback
- sram-size-capture : size of sram to be allocated during capture
+- interrupts : Interrupt numbers for McASP, currently not used by the driver
+- interrupt-names : Known interrupt names are "tx" and "rx"
Example:
@@ -41,6 +42,7 @@ mcasp0: mcasp0@1d00000 {
reg = <0x100000 0x3000>;
reg-names "mpu";
interrupts = <82 83>;
+ interrupts-names = "tx", "rx";
op-mode = <0>; /* MCASP_IIS_MODE */
tdm-slots = <2>;
num-serializer = <16>;

60
target/linux/omap/patches-3.12/405-ASoC-davinci-Add-support-for-AM33xx-SoC-Audio.patch
View File

@ -1,60 +0,0 @@
From 8f3e1fa024017a6b3d7fd8c2a75ee6ff5e4127f8 Mon Sep 17 00:00:00 2001
From: "Hebbar, Gururaja" <gururaja.hebbar@ti.com>
Date: Wed, 1 Aug 2012 12:04:22 +0530
Subject: [PATCH 216/752] ASoC: davinci: Add support for AM33xx SoC Audio
AM33xx uses same McASP IP as the Davinci Platform. This patch updates
Kconfig and makefile to enable build for McASP, PCM & Codec drivers.
Signed-off-by: Hebbar, Gururaja <gururaja.hebbar@ti.com>
Signed-off-by: Darren Etheridge <detheridge@ti.com>
Signed-off-by: Jyri Sarha <jsarha@ti.com>
---
sound/soc/davinci/Kconfig | 18 +++++++++++++++---
sound/soc/davinci/Makefile | 1 +
2 files changed, 16 insertions(+), 3 deletions(-)
--- a/sound/soc/davinci/Kconfig
+++ b/sound/soc/davinci/Kconfig
@@ -1,9 +1,10 @@
config SND_DAVINCI_SOC
- tristate "SoC Audio for the TI DAVINCI chip"
- depends on ARCH_DAVINCI
+ tristate "SoC Audio for the TI DAVINCI or AM33XX chip"
+ depends on ARCH_DAVINCI || SOC_AM33XX
help
+ Platform driver for daVinci or AM33xx
Say Y or M if you want to add support for codecs attached to
- the DAVINCI AC97 or I2S interface. You will also need
+ the DAVINCI AC97, I2S, or McASP interface. You will also need
to select the audio interfaces to support below.
config SND_DAVINCI_SOC_I2S
@@ -15,6 +16,17 @@ config SND_DAVINCI_SOC_MCASP
config SND_DAVINCI_SOC_VCIF
tristate
+config SND_AM33XX_SOC_EVM
+ tristate "SoC Audio for the AM33XX chip based boards"
+ depends on SND_DAVINCI_SOC && SOC_AM33XX
+ select SND_SOC_TLV320AIC3X
+ select SND_DAVINCI_SOC_MCASP
+ help
+ Say Y or M if you want to add support for SoC audio on AM33XX
+ boards using McASP and TLV320AIC3X codec. For example AM335X-EVM,
+ AM335X-EVMSK, and BeagelBone with AudioCape boards have this
+ setup.
+
config SND_DAVINCI_SOC_EVM
tristate "SoC Audio support for DaVinci DM6446, DM355 or DM365 EVM"
depends on SND_DAVINCI_SOC
--- a/sound/soc/davinci/Makefile
+++ b/sound/soc/davinci/Makefile
@@ -13,6 +13,7 @@ obj-$(CONFIG_SND_DAVINCI_SOC_VCIF) += sn
snd-soc-evm-objs := davinci-evm.o
obj-$(CONFIG_SND_DAVINCI_SOC_EVM) += snd-soc-evm.o
+obj-$(CONFIG_SND_AM33XX_SOC_EVM) += snd-soc-evm.o
obj-$(CONFIG_SND_DM6467_SOC_EVM) += snd-soc-evm.o
obj-$(CONFIG_SND_DA830_SOC_EVM) += snd-soc-evm.o
obj-$(CONFIG_SND_DA850_SOC_EVM) += snd-soc-evm.o

33
target/linux/omap/patches-3.12/406-ASoC-tlv320aic3x-Add-regulators-to-DT-bindings-docum.patch
View File

@ -1,33 +0,0 @@
From 2e8f45c820bc025bac3a5257478f16f73b38d54c Mon Sep 17 00:00:00 2001
From: Jyri Sarha <jsarha@ti.com>
Date: Wed, 11 Sep 2013 15:04:56 +0300
Subject: [PATCH 217/752] ASoC: tlv320aic3x: Add regulators to DT bindings
document
Add regulator properties to tlv320aic3x DT bindings document.
Signed-off-by: Jyri Sarha <jsarha@ti.com>
---
Documentation/devicetree/bindings/sound/tlv320aic3x.txt | 7 +++++++
1 file changed, 7 insertions(+)
--- a/Documentation/devicetree/bindings/sound/tlv320aic3x.txt
+++ b/Documentation/devicetree/bindings/sound/tlv320aic3x.txt
@@ -24,10 +24,17 @@ Optional properties:
3 - MICBIAS output is connected to AVDD,
If this node is not mentioned or if the value is incorrect, then MicBias
is powered down.
+- AVDD-supply, IOVDD-supply, DRVDD-supply, DVDD-supply : power supplies for the
+ device as covered in Documentation/devicetree/bindings/regulator/regulator.txt
Example:
tlv320aic3x: tlv320aic3x@1b {
compatible = "ti,tlv320aic3x";
reg = <0x1b>;
+
+ AVDD-supply = <&regulator>;
+ IOVDD-supply = <&regulator>;
+ DRVDD-supply = <&regulator>;
+ DVDD-supply = <&regulator>;
};

41
target/linux/omap/patches-3.12/407-ASoC-tlv320aic3x-Add-codec-pins-to-DT-bindings-docum.patch
View File

@ -1,41 +0,0 @@
From 6afd5cb1f92a1965ffa3c0f304f95ab19b49fa84 Mon Sep 17 00:00:00 2001
From: Jyri Sarha <jsarha@ti.com>
Date: Thu, 12 Sep 2013 14:37:08 +0300
Subject: [PATCH 218/752] ASoC: tlv320aic3x: Add codec pins to DT bindings
document
Add list of codec pins to tlv320aic3x DT bindings document.
Signed-off-by: Jyri Sarha <jsarha@ti.com>
---
.../devicetree/bindings/sound/tlv320aic3x.txt | 19 +++++++++++++++++++
1 file changed, 19 insertions(+)
--- a/Documentation/devicetree/bindings/sound/tlv320aic3x.txt
+++ b/Documentation/devicetree/bindings/sound/tlv320aic3x.txt
@@ -27,6 +27,25 @@ Optional properties:
- AVDD-supply, IOVDD-supply, DRVDD-supply, DVDD-supply : power supplies for the
device as covered in Documentation/devicetree/bindings/regulator/regulator.txt
+CODEC output pins:
+ * LLOUT
+ * RLOUT
+ * MONO_LOUT
+ * HPLOUT
+ * HPROUT
+ * HPLCOM
+ * HPRCOM
+
+CODEC input pins:
+ * MIC3L
+ * MIC3R
+ * LINE1L
+ * LINE2L
+ * LINE1R
+ * LINE2R
+
+The pins can be used in referring sound node's audio-routing property.
+
Example:
tlv320aic3x: tlv320aic3x@1b {

42
target/linux/omap/patches-3.12/408-ARM-dts-am33xx-Add-mcasp0-and-mcasp1-device-tree-ent.patch
View File

@ -1,42 +0,0 @@
From a049ce751e60451b47fa744342db84db44883e57 Mon Sep 17 00:00:00 2001
From: Pantelis Antoniou <panto@antoniou-consulting.com>
Date: Thu, 10 Jan 2013 20:37:45 +0200
Subject: [PATCH 219/752] ARM/dts: am33xx: Add mcasp0 and mcasp1 device tree
entries
Add missing mcasp entries in the am33xx.dtsi include file.
Signed-off-by: Pantelis Antoniou <panto@antoniou-consulting.com>
Signed-off-by: Darren Etheridge <detheridge@ti.com>
Signed-off-by: Jyri Sarha <jsarha@ti.com>
---
arch/arm/boot/dts/am33xx.dtsi | 19 +++++++++++++++++++
1 file changed, 19 insertions(+)
--- a/arch/arm/boot/dts/am33xx.dtsi
+++ b/arch/arm/boot/dts/am33xx.dtsi
@@ -726,5 +726,24 @@
<&edma 5>;
dma-names = "tx", "rx";
};
+
+ mcasp0: mcasp@48038000 {
+ compatible = "ti,omap2-mcasp-audio";
+ ti,hwmods = "mcasp0";
+ reg = <0x48038000 0x2000>;
+ interrupts = <80 81>;
+ interrupts-names = "tx", "rx";
+ status = "disabled";
+ };
+
+ mcasp1: mcasp@4803C000 {
+ compatible = "ti,omap2-mcasp-audio";
+ ti,hwmods = "mcasp1";
+ reg = <0x4803C000 0x2000>;
+ interrupts = <82 83>;
+ interrupts-names = "tx", "rx";
+ status = "disabled";
+ };
+
};
};

51
target/linux/omap/patches-3.12/409-ARM-dts-am33xx-mcasp-Add-new-dma-register-location-t.patch
View File

@ -1,51 +0,0 @@
From 15ffa765da3f2427b506472baa72d0f3a90b6be5 Mon Sep 17 00:00:00 2001
From: Jyri Sarha <jsarha@ti.com>
Date: Thu, 5 Sep 2013 21:49:35 +0300
Subject: [PATCH 220/752] ARM/dts: am33xx: mcasp: Add new dma register
location to reg-property
This patch adds an optional address range to reg property. The range
describes the register location for DMA controller on am33xx. The both
address ranges are named accordingly in the reg-names property.
Signed-off-by: Hebbar, Gururaja <gururaja.hebbar@ti.com>
Signed-off-by: Darren Etheridge <detheridge@ti.com>
Signed-off-by: Jyri Sarha <jsarha@ti.com>
---
arch/arm/boot/dts/am33xx.dtsi | 14 ++++++++++++--
1 file changed, 12 insertions(+), 2 deletions(-)
--- a/arch/arm/boot/dts/am33xx.dtsi
+++ b/arch/arm/boot/dts/am33xx.dtsi
@@ -730,19 +730,29 @@
mcasp0: mcasp@48038000 {
compatible = "ti,omap2-mcasp-audio";
ti,hwmods = "mcasp0";
- reg = <0x48038000 0x2000>;
+ reg = <0x48038000 0x2000>,
+ <0x46400000 0x400000>;
+ reg-names = "mpu", "dma";
interrupts = <80 81>;
interrupts-names = "tx", "rx";
status = "disabled";
+ dmas = <&edma 8
+ &edma 9>;
+ dma-names = "tx", "rx";
};
mcasp1: mcasp@4803C000 {
compatible = "ti,omap2-mcasp-audio";
ti,hwmods = "mcasp1";
- reg = <0x4803C000 0x2000>;
+ reg = <0x4803C000 0x2000>,
+ <0x46400000 0x400000>;
+ reg-names = "mpu", "dma";
interrupts = <82 83>;
interrupts-names = "tx", "rx";
status = "disabled";
+ dmas = <&edma 10
+ &edma 11>;
+ dma-names = "tx", "rx";
};
};

101
target/linux/omap/patches-3.12/410-ARM-dts-am335x-evm-Add-audio-support-for-am335x-evm.patch
View File

@ -1,101 +0,0 @@
From 2bf66a74b322deebc7c8bba11cab58c18b745608 Mon Sep 17 00:00:00 2001
From: Darren Etheridge <detheridge@ti.com>
Date: Wed, 31 Jul 2013 12:38:26 -0500
Subject: [PATCH 221/752] ARM/dts: am335x-evm: Add audio support for
am335x-evm.dts
Adds sound, tlv320aic3x, mcasp1, and am335x_evm_audio_pin nodes.
Signed-off-by: Darren Etheridge <detheridge@ti.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Jyri Sarha <jsarha@ti.com>
---
arch/arm/boot/dts/am335x-evm.dts | 56 ++++++++++++++++++++++++++++++++++++++
1 file changed, 56 insertions(+)
--- a/arch/arm/boot/dts/am335x-evm.dts
+++ b/arch/arm/boot/dts/am335x-evm.dts
@@ -149,6 +149,16 @@
0x14c (PIN_INPUT_PULLDOWN | MUX_MODE7)
>;
};
+
+ am335x_evm_audio_pins: am335x_evm_audio_pins {
+ pinctrl-single,pins = <
+ 0x10c (PIN_INPUT_PULLDOWN | MUX_MODE4) /* mii1_rx_dv.mcasp1_aclkx */
+ 0x110 (PIN_INPUT_PULLDOWN | MUX_MODE4) /* mii1_txd3.mcasp1_fsx */
+ 0x108 (PIN_OUTPUT_PULLDOWN | MUX_MODE4) /* mii1_col.mcasp1_axr2 */
+ 0x144 (PIN_INPUT_PULLDOWN | MUX_MODE4) /* rmii1_ref_clk.mcasp1_axr3 */
+ >;
+ };
+
};
ocp {
@@ -244,6 +254,19 @@
compatible = "ti,tmp275";
reg = <0x48>;
};
+
+ tlv320aic3x: tlv320aic3x@1b {
+ compatible = "ti,tlv320aic3x";
+ reg = <0x1b>;
+ status = "okay";
+
+ /* Regulators */
+ AVDD-supply = <&vaux2_reg>;
+ IOVDD-supply = <&vaux2_reg>;
+ DRVDD-supply = <&vaux2_reg>;
+ DVDD-supply = <&vbat>;
+ };
+
};
elm: elm@48080000 {
@@ -340,6 +363,20 @@
};
};
};
+
+ sound {
+ compatible = "ti,da830-evm-audio";
+ ti,model = "DA830 EVM";
+ ti,audio-codec = <&tlv320aic3x>;
+ ti,mcasp-controller = <&mcasp1>;
+ ti,codec-clock-rate = <12000000>;
+ ti,audio-routing =
+ "Headphone Jack", "HPLOUT",
+ "Headphone Jack", "HPROUT",
+ "LINE1L", "Line In",
+ "LINE1R", "Line In";
+ };
+
};
vbat: fixedregulator@0 {
@@ -407,6 +444,25 @@
#include "tps65910.dtsi"
+&mcasp1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&am335x_evm_audio_pins>;
+
+ status = "okay";
+
+ op-mode = <0>; /* MCASP_IIS_MODE */
+ tdm-slots = <2>;
+ num-serializer = <16>;
+ serial-dir = < /* 0: INACTIVE, 1: TX, 2: RX */
+ 0 0 1 2
+ 0 0 0 0
+ 0 0 0 0
+ 0 0 0 0
+ >;
+ tx-num-evt = <1>;
+ rx-num-evt = <1>;
+};
+
&tps {
vcc1-supply = <&vbat>;
vcc2-supply = <&vbat>;

30
target/linux/omap/patches-3.12/411-ARM-dts-am335x-evm-Remove-blank-lines.patch
View File

@ -1,30 +0,0 @@
From 76b54fecdd214b32f568b2f97102fc1ab5745fa1 Mon Sep 17 00:00:00 2001
From: Peter Ujfalusi <peter.ujfalusi@ti.com>
Date: Mon, 23 Sep 2013 10:34:06 +0300
Subject: [PATCH 222/752] ARM/dts: am335x-evm: Remove blank lines
Clean up the blank lines where they are not needed.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
---
arch/arm/boot/dts/am335x-evm.dts | 2 --
1 file changed, 2 deletions(-)
--- a/arch/arm/boot/dts/am335x-evm.dts
+++ b/arch/arm/boot/dts/am335x-evm.dts
@@ -266,7 +266,6 @@
DRVDD-supply = <&vaux2_reg>;
DVDD-supply = <&vbat>;
};
-
};
elm: elm@48080000 {
@@ -376,7 +375,6 @@
"LINE1L", "Line In",
"LINE1R", "Line In";
};
-
};
vbat: fixedregulator@0 {

35
target/linux/omap/patches-3.12/412-ARM-dts-am335x-evm-Clarify-the-audio-codec-node.patch
View File

@ -1,35 +0,0 @@
From df3fbecdac2b46b7716c16c185cba357cc55d00a Mon Sep 17 00:00:00 2001
From: Peter Ujfalusi <peter.ujfalusi@ti.com>
Date: Mon, 23 Sep 2013 10:34:07 +0300
Subject: [PATCH 223/752] ARM/dts: am335x-evm: Clarify the audio codec node
The board have tlv320aic3106 codec. Use this name in the dts file instead
of the generic ltv320aic3x.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
---
arch/arm/boot/dts/am335x-evm.dts | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
--- a/arch/arm/boot/dts/am335x-evm.dts
+++ b/arch/arm/boot/dts/am335x-evm.dts
@@ -255,8 +255,8 @@
reg = <0x48>;
};
- tlv320aic3x: tlv320aic3x@1b {
- compatible = "ti,tlv320aic3x";
+ tlv320aic3106: tlv320aic3106@1b {
+ compatible = "ti,tlv320aic3106";
reg = <0x1b>;
status = "okay";
@@ -366,7 +366,7 @@
sound {
compatible = "ti,da830-evm-audio";
ti,model = "DA830 EVM";
- ti,audio-codec = <&tlv320aic3x>;
+ ti,audio-codec = <&tlv320aic3106>;
ti,mcasp-controller = <&mcasp1>;
ti,codec-clock-rate = <12000000>;
ti,audio-routing =

27
target/linux/omap/patches-3.12/413-ARM-dts-am335x-evm-Add-unique-name-for-the-sound-car.patch
View File

@ -1,27 +0,0 @@
From d4b7ebbadccb4632ad16f07a19cee57aa7b73cdb Mon Sep 17 00:00:00 2001
From: Peter Ujfalusi <peter.ujfalusi@ti.com>
Date: Mon, 23 Sep 2013 10:34:08 +0300
Subject: [PATCH 224/752] ARM/dts: am335x-evm: Add unique name for the sound
card
Change the name of the sound card to 'AM335x-EVM' from 'DA830 EVM'.
User space might need to differentiate between the boards when it comes to
audio setup (mixer config, PCM lookup, etc).
It is better to use unique name for different boards.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
---
arch/arm/boot/dts/am335x-evm.dts | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/arch/arm/boot/dts/am335x-evm.dts
+++ b/arch/arm/boot/dts/am335x-evm.dts
@@ -365,7 +365,7 @@
sound {
compatible = "ti,da830-evm-audio";
- ti,model = "DA830 EVM";
+ ti,model = "AM335x-EVM";
ti,audio-codec = <&tlv320aic3106>;
ti,mcasp-controller = <&mcasp1>;
ti,codec-clock-rate = <12000000>;

95
target/linux/omap/patches-3.12/414-ARM-dts-am335x-evmsk-Audio-support.patch
View File

@ -1,95 +0,0 @@
From d4c71e652f457077eac1ad83a9e32d3f11fc99b2 Mon Sep 17 00:00:00 2001
From: Peter Ujfalusi <peter.ujfalusi@ti.com>
Date: Mon, 23 Sep 2013 10:34:09 +0300
Subject: [PATCH 225/752] ARM/dts: am335x-evmsk: Audio support
AM335x EVM-SK have only support for audio playback (stereo jack on the
board) via tlv320aic3106 codec connected to McASP1.
Enable the support for audio playback on the board:
- McASP1 configuration
- tlv320aic3106 configuration
- Machine driver.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
---
arch/arm/boot/dts/am335x-evmsk.dts | 51 ++++++++++++++++++++++++++++++++++++
1 file changed, 51 insertions(+)
--- a/arch/arm/boot/dts/am335x-evmsk.dts
+++ b/arch/arm/boot/dts/am335x-evmsk.dts
@@ -158,6 +158,15 @@
0x14c (PIN_INPUT_PULLDOWN | MUX_MODE7)
>;
};
+
+ mcasp1_pins: mcasp1_pins {
+ pinctrl-single,pins = <
+ 0x10c (PIN_INPUT_PULLDOWN | MUX_MODE4) /* mii1_crs.mcasp1_aclkx */
+ 0x110 (PIN_INPUT_PULLDOWN | MUX_MODE4) /* mii1_rxerr.mcasp1_fsx */
+ 0x108 (PIN_OUTPUT_PULLDOWN | MUX_MODE4) /* mii1_col.mcasp1_axr2 */
+ 0x144 (PIN_INPUT_PULLDOWN | MUX_MODE4) /* rmii1_ref_clk.mcasp1_axr3 */
+ >;
+ };
};
ocp {
@@ -206,6 +215,18 @@
st,max-limit-y = <550>;
st,max-limit-z = <750>;
};
+
+ tlv320aic3106: tlv320aic3106@1b {
+ compatible = "ti,tlv320aic3106";
+ reg = <0x1b>;
+ status = "okay";
+
+ /* Regulators */
+ AVDD-supply = <&vaux2_reg>;
+ IOVDD-supply = <&vaux2_reg>;
+ DRVDD-supply = <&vaux2_reg>;
+ DVDD-supply = <&vbat>;
+ };
};
musb: usb@47400000 {
@@ -233,6 +254,17 @@
pinctrl-0 = <&ecap2_pins>;
};
};
+
+ sound {
+ compatible = "ti,da830-evm-audio";
+ ti,model = "AM335x-EVMSK";
+ ti,audio-codec = <&tlv320aic3106>;
+ ti,mcasp-controller = <&mcasp1>;
+ ti,codec-clock-rate = <24576000>;
+ ti,audio-routing =
+ "Headphone Jack", "HPLOUT",
+ "Headphone Jack", "HPROUT";
+ };
};
vbat: fixedregulator@0 {
@@ -438,3 +470,22 @@
&aes {
status = "okay";
};
+
+&mcasp1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mcasp1_pins>;
+
+ status = "okay";
+
+ op-mode = <0>; /* MCASP_IIS_MODE */
+ tdm-slots = <2>;
+ num-serializer = <16>;
+ serial-dir = < /* 0: INACTIVE, 1: TX, 2: RX */
+ 0 0 1 2
+ 0 0 0 0
+ 0 0 0 0
+ 0 0 0 0
+ >;
+ tx-num-evt = <1>;
+ rx-num-evt = <1>;
+};

90
target/linux/omap/patches-3.12/415-ASoC-davinci-mcasp-Remove-redundant-num-serializer-D.patch
View File

@ -1,90 +0,0 @@
From fdb8d3521ecae71865df66a84a1cbe13f7daa6f5 Mon Sep 17 00:00:00 2001
From: Peter Ujfalusi <peter.ujfalusi@ti.com>
Date: Mon, 23 Sep 2013 11:25:02 +0300
Subject: [PATCH 226/752] ASoC: davinci: mcasp: Remove redundant
num-serializer DT parameter
The serial-dir array gives this information so there is no need to have the
num-serializer property in DT description.
Just ignore the property in the driver the DTS files can be updated
separately without regression.
Update the documentation at the same time for davinci-mcasp
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
---
.../bindings/sound/davinci-mcasp-audio.txt | 8 +++----
sound/soc/davinci/davinci-mcasp.c | 22 +++++---------------
2 files changed, 8 insertions(+), 22 deletions(-)
--- a/Documentation/devicetree/bindings/sound/davinci-mcasp-audio.txt
+++ b/Documentation/devicetree/bindings/sound/davinci-mcasp-audio.txt
@@ -13,10 +13,9 @@ Required properties:
good to keep "mpu" first in the list.
- op-mode : I2S/DIT ops mode.
- tdm-slots : Slots for TDM operation.
-- num-serializer : Serializers used by McASP.
-- serial-dir : A list of serializer pin mode. The list number should be equal
- to "num-serializer" parameter. Each entry is a number indication
- serializer pin direction. (0 - INACTIVE, 1 - TX, 2 - RX)
+- serial-dir : A list of serializer configuration. Each entry is a number
+ indication serializer pin direction.
+ (0 - INACTIVE, 1 - TX, 2 - RX)
- dmas: two element list of DMA controller phandles and DMA request line
ordered pairs.
- dma-names: identifier string for each DMA request line in the dmas property.
@@ -45,7 +44,6 @@ mcasp0: mcasp0@1d00000 {
interrupts-names = "tx", "rx";
op-mode = <0>; /* MCASP_IIS_MODE */
tdm-slots = <2>;
- num-serializer = <16>;
serial-dir = <
0 0 0 0 /* 0: INACTIVE, 1: TX, 2: RX */
0 0 0 0
--- a/sound/soc/davinci/davinci-mcasp.c
+++ b/sound/soc/davinci/davinci-mcasp.c
@@ -1050,7 +1050,6 @@ static struct snd_platform_data *davinci
struct of_phandle_args dma_spec;
const u32 *of_serial_dir32;
- u8 *of_serial_dir;
u32 val;
int i, ret = 0;
@@ -1081,32 +1080,21 @@ static struct snd_platform_data *davinci
pdata->tdm_slots = val;
}
- ret = of_property_read_u32(np, "num-serializer", &val);
- if (ret >= 0)
- pdata->num_serializer = val;
-
of_serial_dir32 = of_get_property(np, "serial-dir", &val);
val /= sizeof(u32);
- if (val != pdata->num_serializer) {
- dev_err(&pdev->dev,
- "num-serializer(%d) != serial-dir size(%d)\n",
- pdata->num_serializer, val);
- ret = -EINVAL;
- goto nodata;
- }
-
if (of_serial_dir32) {
- of_serial_dir = devm_kzalloc(&pdev->dev,
- (sizeof(*of_serial_dir) * val),
- GFP_KERNEL);
+ u8 *of_serial_dir = devm_kzalloc(&pdev->dev,
+ (sizeof(*of_serial_dir) * val),
+ GFP_KERNEL);
if (!of_serial_dir) {
ret = -ENOMEM;
goto nodata;
}
- for (i = 0; i < pdata->num_serializer; i++)
+ for (i = 0; i < val; i++)
of_serial_dir[i] = be32_to_cpup(&of_serial_dir32[i]);
+ pdata->num_serializer = val;
pdata->serial_dir = of_serial_dir;
}

24
target/linux/omap/patches-3.12/416-ARM-dts-am335x-evm-Remove-num-serializer-property-fo.patch
View File

@ -1,24 +0,0 @@
From 7fd70076a17c2a5b1b4bac0175a25e5d04075e43 Mon Sep 17 00:00:00 2001
From: Peter Ujfalusi <peter.ujfalusi@ti.com>
Date: Mon, 23 Sep 2013 11:25:03 +0300
Subject: [PATCH 227/752] ARM/dts: am335x-evm: Remove num-serializer property
for mcasp node
The num-serializer property is redundant and the driver no longer needs it.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
---
arch/arm/boot/dts/am335x-evm.dts | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/arch/arm/boot/dts/am335x-evm.dts
+++ b/arch/arm/boot/dts/am335x-evm.dts
@@ -450,7 +450,7 @@
op-mode = <0>; /* MCASP_IIS_MODE */
tdm-slots = <2>;
- num-serializer = <16>;
+ /* 16 serializer */
serial-dir = < /* 0: INACTIVE, 1: TX, 2: RX */
0 0 1 2
0 0 0 0

24
target/linux/omap/patches-3.12/417-ARM-dts-am335x-evmsk-Remove-num-serializer-property.patch
View File

@ -1,24 +0,0 @@
From 97977a1534ef27247acc9549f5433ef288f208eb Mon Sep 17 00:00:00 2001
From: Peter Ujfalusi <peter.ujfalusi@ti.com>
Date: Mon, 23 Sep 2013 11:25:04 +0300
Subject: [PATCH 228/752] ARM/dts: am335x-evmsk: Remove num-serializer
property for mcasp node
The num-serializer property is redundant and the driver no longer needs it.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
---
arch/arm/boot/dts/am335x-evmsk.dts | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
--- a/arch/arm/boot/dts/am335x-evmsk.dts
+++ b/arch/arm/boot/dts/am335x-evmsk.dts
@@ -479,7 +479,7 @@
op-mode = <0>; /* MCASP_IIS_MODE */
tdm-slots = <2>;
- num-serializer = <16>;
+ /* 16 serializer */
serial-dir = < /* 0: INACTIVE, 1: TX, 2: RX */
0 0 1 2
0 0 0 0

18
target/linux/omap/patches-3.12/500-ARM-dts-AM33XX-Add-LCDC-info-into-am335x-evm.patch
View File

@ -1,18 +0,0 @@
--- a/arch/arm/boot/dts/am33xx.dtsi
+++ b/arch/arm/boot/dts/am33xx.dtsi
@@ -678,6 +678,15 @@
status = "disabled";
};
+ lcdc: lcdc@4830e000 {
+ compatible = "ti,am33xx-tilcdc";
+ reg = <0x4830e000 0x1000>;
+ interrupt-parent = <&intc>;
+ interrupts = <36>;
+ ti,hwmods = "lcdc";
+ status = "disabled";
+ };
+
tscadc: tscadc@44e0d000 {
compatible = "ti,am3359-tscadc";
reg = <0x44e0d000 0x1000>;

1230
target/linux/omap/patches-3.12/600-crypto-omap-des-Add-omap-des-driver-for-OMAP4-AM43xx.patch
View File

File diff suppressed because it is too large Load Diff

57
target/linux/omap/patches-3.12/601-crypto-omap-des-Add-config-and-build-options.patch
View File

@ -1,57 +0,0 @@
From patchwork Thu Aug 29 23:27:52 2013
Content-Type: text/plain; charset="utf-8"
MIME-Version: 1.0
Content-Transfer-Encoding: 7bit
Subject: [2/3] crypto: omap-des: Add config and build options
From: Joel Fernandes <joelf@ti.com>
X-Patchwork-Id: 2851671
Message-Id: <1377818873-21174-3-git-send-email-joelf@ti.com>
To: Herbert Xu <herbert@gondor.hengli.com.au>, "David S. Miller"
<davem@davemloft.net>, Mark Greer <mgreer@animalcreek.com>, Tony Lindgren
<tony@atomide.com>, Lokesh Vutla <lokeshvutla@ti.com>
Cc: Joel Fernandes <joelf@ti.com>,
Linux OMAP List <linux-omap@vger.kernel.org>,
Linux Kernel Mailing List <linux-kernel@vger.kernel.org>,
Linux ARM Kernel List <linux-arm-kernel@lists.infradead.org>,
Linux Crypto Mailing List <linux-crypto@vger.kernel.org>
Date: Thu, 29 Aug 2013 18:27:52 -0500
Add config and build options for the newly added omap-des driver.
Signed-off-by: Joel Fernandes <joelf@ti.com>
---
drivers/crypto/Kconfig | 11 +++++++++++
drivers/crypto/Makefile | 1 +
2 files changed, 12 insertions(+)
--- a/drivers/crypto/Kconfig
+++ b/drivers/crypto/Kconfig
@@ -263,6 +263,17 @@ config CRYPTO_DEV_OMAP_AES
OMAP processors have AES module accelerator. Select this if you
want to use the OMAP module for AES algorithms.
+config CRYPTO_DEV_OMAP_DES
+ tristate "Support for OMAP DES3DES hw engine"
+ depends on ARCH_OMAP2PLUS
+ select CRYPTO_DES
+ select CRYPTO_BLKCIPHER2
+ help
+ OMAP processors have DES/3DES module accelerator. Select this if you
+ want to use the OMAP module for DES and 3DES algorithms. Currently
+ the ECB and CBC modes of operation supported by the driver. Also
+ accesses made on unaligned boundaries are also supported.
+
config CRYPTO_DEV_PICOXCELL
tristate "Support for picoXcell IPSEC and Layer2 crypto engines"
depends on ARCH_PICOXCELL && HAVE_CLK
--- a/drivers/crypto/Makefile
+++ b/drivers/crypto/Makefile
@@ -11,6 +11,7 @@ obj-$(CONFIG_CRYPTO_DEV_IXP4XX) += ixp4x
obj-$(CONFIG_CRYPTO_DEV_PPC4XX) += amcc/
obj-$(CONFIG_CRYPTO_DEV_OMAP_SHAM) += omap-sham.o
obj-$(CONFIG_CRYPTO_DEV_OMAP_AES) += omap-aes.o
+obj-$(CONFIG_CRYPTO_DEV_OMAP_DES) += omap-des.o
obj-$(CONFIG_CRYPTO_DEV_PICOXCELL) += picoxcell_crypto.o
obj-$(CONFIG_CRYPTO_DEV_SAHARA) += sahara.o
obj-$(CONFIG_CRYPTO_DEV_DCP) += dcp.o

111
target/linux/omap/patches-3.12/602-crypto-omap-des-Add-triple-DES-des3_ede-support-to-driver.patch
View File

@ -1,111 +0,0 @@
From patchwork Thu Aug 29 23:27:53 2013
Content-Type: text/plain; charset="utf-8"
MIME-Version: 1.0
Content-Transfer-Encoding: 7bit
Subject: [3/3] crypto: omap-des: Add triple DES (des3_ede) support to driver
From: Joel Fernandes <joelf@ti.com>
X-Patchwork-Id: 2851679
Message-Id: <1377818873-21174-4-git-send-email-joelf@ti.com>
To: Herbert Xu <herbert@gondor.hengli.com.au>, "David S. Miller"
<davem@davemloft.net>, Mark Greer <mgreer@animalcreek.com>, Tony Lindgren
<tony@atomide.com>, Lokesh Vutla <lokeshvutla@ti.com>
Cc: Joel Fernandes <joelf@ti.com>,
Linux OMAP List <linux-omap@vger.kernel.org>,
Linux Kernel Mailing List <linux-kernel@vger.kernel.org>,
Linux ARM Kernel List <linux-arm-kernel@lists.infradead.org>,
Linux Crypto Mailing List <linux-crypto@vger.kernel.org>
Date: Thu, 29 Aug 2013 18:27:53 -0500
OMAP DES module supports 3DES operation where 3 64-bit keys are used to
perform a DES encrypt-decrypt-encrypt (ede) operation on a buffer.
Signed-off-by: Joel Fernandes <joelf@ti.com>
---
drivers/crypto/omap-des.c | 53 ++++++++++++++++++++++++++++++++++++++++++++---
1 file changed, 50 insertions(+), 3 deletions(-)
--- a/drivers/crypto/omap-des.c
+++ b/drivers/crypto/omap-des.c
@@ -83,7 +83,7 @@ struct omap_des_ctx {
struct omap_des_dev *dd;
int keylen;
- u32 key[DES_KEY_SIZE / sizeof(u32)];
+ u32 key[(3 * DES_KEY_SIZE) / sizeof(u32)];
unsigned long flags;
};
@@ -265,8 +265,10 @@ static int omap_des_write_ctrl(struct om
val |= DES_REG_CTRL_CBC;
if (dd->flags & FLAGS_ENCRYPT)
val |= DES_REG_CTRL_DIRECTION;
+ if (key32 == 6)
+ val |= DES_REG_CTRL_TDES;
- mask |= DES_REG_CTRL_CBC | DES_REG_CTRL_DIRECTION;
+ mask |= DES_REG_CTRL_CBC | DES_REG_CTRL_DIRECTION | DES_REG_CTRL_TDES;
omap_des_write_mask(dd, DES_REG_CTRL(dd), val, mask);
@@ -725,7 +727,7 @@ static int omap_des_setkey(struct crypto
{
struct omap_des_ctx *ctx = crypto_ablkcipher_ctx(tfm);
- if (keylen != DES_KEY_SIZE)
+ if (keylen != DES_KEY_SIZE && keylen != (3*DES_KEY_SIZE))
return -EINVAL;
pr_debug("enter, keylen: %d\n", keylen);
@@ -815,6 +817,51 @@ static struct crypto_alg algs_ecb_cbc[]
.ivsize = DES_BLOCK_SIZE,
.setkey = omap_des_setkey,
.encrypt = omap_des_cbc_encrypt,
+ .decrypt = omap_des_cbc_decrypt,
+ }
+},
+{
+ .cra_name = "ecb(des3_ede)",
+ .cra_driver_name = "ecb-des3-omap",
+ .cra_priority = 100,
+ .cra_flags = CRYPTO_ALG_TYPE_ABLKCIPHER |
+ CRYPTO_ALG_KERN_DRIVER_ONLY |
+ CRYPTO_ALG_ASYNC,
+ .cra_blocksize = DES_BLOCK_SIZE,
+ .cra_ctxsize = sizeof(struct omap_des_ctx),
+ .cra_alignmask = 0,
+ .cra_type = &crypto_ablkcipher_type,
+ .cra_module = THIS_MODULE,
+ .cra_init = omap_des_cra_init,
+ .cra_exit = omap_des_cra_exit,
+ .cra_u.ablkcipher = {
+ .min_keysize = 3*DES_KEY_SIZE,
+ .max_keysize = 3*DES_KEY_SIZE,
+ .setkey = omap_des_setkey,
+ .encrypt = omap_des_ecb_encrypt,
+ .decrypt = omap_des_ecb_decrypt,
+ }
+},
+{
+ .cra_name = "cbc(des3_ede)",
+ .cra_driver_name = "cbc-des3-omap",
+ .cra_priority = 100,
+ .cra_flags = CRYPTO_ALG_TYPE_ABLKCIPHER |
+ CRYPTO_ALG_KERN_DRIVER_ONLY |
+ CRYPTO_ALG_ASYNC,
+ .cra_blocksize = DES_BLOCK_SIZE,
+ .cra_ctxsize = sizeof(struct omap_des_ctx),
+ .cra_alignmask = 0,
+ .cra_type = &crypto_ablkcipher_type,
+ .cra_module = THIS_MODULE,
+ .cra_init = omap_des_cra_init,
+ .cra_exit = omap_des_cra_exit,
+ .cra_u.ablkcipher = {
+ .min_keysize = 3*DES_KEY_SIZE,
+ .max_keysize = 3*DES_KEY_SIZE,
+ .ivsize = DES_BLOCK_SIZE,
+ .setkey = omap_des_setkey,
+ .encrypt = omap_des_cbc_encrypt,
.decrypt = omap_des_cbc_decrypt,
}
}

26
target/linux/omap/patches-3.12/797-ARM_dts_omap4-panda-es_Do_not_reset_gpio1.patch
View File

@ -1,26 +0,0 @@
From c1bac171c4f203101611110869bd2511c8153974 Mon Sep 17 00:00:00 2001
From: Nishanth Menon <nm@ti.com>
Date: Thu, 10 Oct 2013 16:44:41 +0000
Subject: ARM: dts: omap4-panda-es: Do not reset gpio1
Do not reset GPIO1 at boot-up because GPIO 7 in GPIO1 block is used on
OMAP4460 PandaBoard-ES to select voltage register in TPS62361 which
supplies VDD_MPU.
Without this, OMAP4460 PandaBoard-ES boards fail to boot-up because
MPU voltage switches over to VSET0 voltage value (boot voltage) which
is not sufficient to operate the device at OPP100.
Signed-off-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Benoit Cousson <bcousson@baylibre.com>
---
--- a/arch/arm/boot/dts/omap4-panda-es.dts
+++ b/arch/arm/boot/dts/omap4-panda-es.dts
@@ -62,3 +62,7 @@
gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>;
};
};
+
+&gpio1 {
+ ti,no-reset-on-init;
+};

40
target/linux/omap/patches-3.12/801-ARM_dts_am33xx_change_usb_ctrl_module_label.patch
View File

@ -1,40 +0,0 @@
From e7243b7673a20ac28cfdc78c8862587ea8173a39 Mon Sep 17 00:00:00 2001
From: Markus Pargmann <mpa@pengutronix.de>
Date: Mon, 14 Oct 2013 12:49:21 +0000
Subject: ARM: dts: am33xx, change usb ctrl module label
Control module is not usb specific.
Changes the label to usb_ctrl_mod.
Signed-off-by: Markus Pargmann <mpa@pengutronix.de>
Signed-off-by: Benoit Cousson <bcousson@baylibre.com>
---
--- a/arch/arm/boot/dts/am33xx.dtsi
+++ b/arch/arm/boot/dts/am33xx.dtsi
@@ -406,7 +406,7 @@
ti,hwmods = "usb_otg_hs";
status = "disabled";
- ctrl_mod: control@44e10000 {
+ usb_ctrl_mod: control@44e10000 {
compatible = "ti,am335x-usb-ctrl-module";
reg = <0x44e10620 0x10
0x44e10648 0x4>;
@@ -419,7 +419,7 @@
reg = <0x47401300 0x100>;
reg-names = "phy";
status = "disabled";
- ti,ctrl_mod = <&ctrl_mod>;
+ ti,ctrl_mod = <&usb_ctrl_mod>;
};
usb0: usb@47401000 {
@@ -467,7 +467,7 @@
reg = <0x47401b00 0x100>;
reg-names = "phy";
status = "disabled";
- ti,ctrl_mod = <&ctrl_mod>;
+ ti,ctrl_mod = <&usb_ctrl_mod>;
};
usb1: usb@47401800 {

36
target/linux/omap/patches-3.12/802-ARM_OMAP3plus_do_not_register_non-dt_OPP_tables_for_device_tree_boot.patch
View File

@ -1,36 +0,0 @@
From 92d51856d7405fa55bcf3d6f20d7e97e0bf2656c Mon Sep 17 00:00:00 2001
From: Nishanth Menon <nm@ti.com>
Date: Wed, 16 Oct 2013 15:39:01 +0000
Subject: ARM: OMAP3+: do not register non-dt OPP tables for device tree boot
OMAP3+ supports both device tree and non-device tree boot.
Device tree bindings for OMAP3+ is supposed to be added via dts following:
Documentation/devicetree/bindings/power/opp.txt
Since we now have device tree entries for OMAP3+ cpu OPPs,
The current code wrongly adds duplicate OPPs. So, dont register OPPs
when booting using device tree.
Signed-off-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
--- a/arch/arm/mach-omap2/opp.c
+++ b/arch/arm/mach-omap2/opp.c
@@ -17,6 +17,7 @@
* GNU General Public License for more details.
*/
#include <linux/module.h>
+#include <linux/of.h>
#include <linux/opp.h>
#include <linux/cpu.h>
@@ -40,6 +41,9 @@ int __init omap_init_opp_table(struct om
{
int i, r;
+ if (of_have_populated_dt())
+ return -EINVAL;
+
if (!opp_def || !opp_def_size) {
pr_err("%s: invalid params!\n", __func__);
return -EINVAL;

127
target/linux/omap/patches-3.12/803-ARM_OMAP2plus_add_missing_lateinit_hook_for_calling_pm_late_init.patch
View File

@ -1,127 +0,0 @@
From 765e7a067eebf372687048ba0242e27f43cf0d71 Mon Sep 17 00:00:00 2001
From: Nishanth Menon <nm@ti.com>
Date: Wed, 16 Oct 2013 15:39:02 +0000
Subject: ARM: OMAP2+: add missing lateinit hook for calling pm late init
AM335x, AM43xx, OMAP5 and DRA7 have missing late init hook. Introduce
SoC specific hook with a call to OMAP2+ generic lateinit hook. This
allows the generic late initializations such as cpufreq hooks to be
active.
Based on out-of-tree patches that need to be introduced in
mainline, this introduction allows us to provide the foundation for
further SoC specific features as they are developed.
Cc: Benoit Cousson <bcousson@baylibre.com>
Cc: Kevin Hilman <khilman@deeprootsystems.com>
Cc: Paul Walmsley <paul@pwsan.com>
Cc: Tony Lindgren <tony@atomide.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
--- a/arch/arm/mach-omap2/board-generic.c
+++ b/arch/arm/mach-omap2/board-generic.c
@@ -180,6 +180,7 @@ DT_MACHINE_START(AM33XX_DT, "Generic AM3
.init_irq = omap_intc_of_init,
.handle_irq = omap3_intc_handle_irq,
.init_machine = omap_generic_init,
+ .init_late = am33xx_init_late,
.init_time = omap3_gptimer_timer_init,
.dt_compat = am33xx_boards_compat,
.restart = am33xx_restart,
@@ -219,6 +220,7 @@ DT_MACHINE_START(OMAP5_DT, "Generic OMAP
.init_early = omap5_init_early,
.init_irq = omap_gic_of_init,
.init_machine = omap_generic_init,
+ .init_late = omap5_init_late,
.init_time = omap5_realtime_timer_init,
.dt_compat = omap5_boards_compat,
.restart = omap44xx_restart,
@@ -234,6 +236,7 @@ static const char *am43_boards_compat[]
DT_MACHINE_START(AM43_DT, "Generic AM43 (Flattened Device Tree)")
.map_io = am33xx_map_io,
.init_early = am43xx_init_early,
+ .init_late = am43xx_init_late,
.init_irq = omap_gic_of_init,
.init_machine = omap_generic_init,
.init_time = omap3_sync32k_timer_init,
@@ -252,6 +255,7 @@ DT_MACHINE_START(DRA7XX_DT, "Generic DRA
.smp = smp_ops(omap4_smp_ops),
.map_io = omap5_map_io,
.init_early = dra7xx_init_early,
+ .init_late = dra7xx_init_late,
.init_irq = omap_gic_of_init,
.init_machine = omap_generic_init,
.init_time = omap5_realtime_timer_init,
--- a/arch/arm/mach-omap2/common.h
+++ b/arch/arm/mach-omap2/common.h
@@ -98,6 +98,7 @@ void am35xx_init_early(void);
void ti81xx_init_early(void);
void am33xx_init_early(void);
void am43xx_init_early(void);
+void am43xx_init_late(void);
void omap4430_init_early(void);
void omap5_init_early(void);
void omap3_init_late(void); /* Do not use this one */
@@ -109,8 +110,11 @@ void omap35xx_init_late(void);
void omap3630_init_late(void);
void am35xx_init_late(void);
void ti81xx_init_late(void);
+void am33xx_init_late(void);
+void omap5_init_late(void);
int omap2_common_pm_late_init(void);
void dra7xx_init_early(void);
+void dra7xx_init_late(void);
#ifdef CONFIG_SOC_BUS
void omap_soc_device_init(void);
--- a/arch/arm/mach-omap2/io.c
+++ b/arch/arm/mach-omap2/io.c
@@ -583,6 +583,11 @@ void __init am33xx_init_early(void)
omap_hwmod_init_postsetup();
omap_clk_init = am33xx_clk_init;
}
+
+void __init am33xx_init_late(void)
+{
+ omap_common_late_init();
+}
#endif
#ifdef CONFIG_SOC_AM43XX
@@ -596,6 +601,11 @@ void __init am43xx_init_early(void)
omap2_set_globals_cm(AM33XX_L4_WK_IO_ADDRESS(AM43XX_PRCM_BASE), NULL);
omap3xxx_check_revision();
}
+
+void __init am43xx_init_late(void)
+{
+ omap_common_late_init();
+}
#endif
#ifdef CONFIG_ARCH_OMAP4
@@ -651,6 +661,11 @@ void __init omap5_init_early(void)
omap54xx_hwmod_init();
omap_hwmod_init_postsetup();
}
+
+void __init omap5_init_late(void)
+{
+ omap_common_late_init();
+}
#endif
#ifdef CONFIG_SOC_DRA7XX
@@ -671,6 +686,11 @@ void __init dra7xx_init_early(void)
dra7xx_hwmod_init();
omap_hwmod_init_postsetup();
}
+
+void __init dra7xx_init_late(void)
+{
+ omap_common_late_init();
+}
#endif

46
target/linux/omap/patches-3.12/804-ARM_OMAP3plus_use_cpu0-cpufreq_driver_in_device_tree_supported_boot.patch
View File

@ -1,46 +0,0 @@
From 60c5fc86d01154e2a005bf701f495426ebc81f73 Mon Sep 17 00:00:00 2001
From: Nishanth Menon <nm@ti.com>
Date: Wed, 16 Oct 2013 15:39:03 +0000
Subject: ARM: OMAP3+: use cpu0-cpufreq driver in device tree supported boot
With OMAP3+ and AM33xx supported SoC having defined CPU device tree
entries with operating-points and clock nodes defined, we can now use
the SoC generic cpufreq-cpu0 driver by registering appropriate device.
Cc: Benoit Cousson <bcousson@baylibre.com>
Cc: Kevin Hilman <khilman@deeprootsystems.com>
Cc: Paul Walmsley <paul@pwsan.com>
Cc: Tony Lindgren <tony@atomide.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
--- a/arch/arm/mach-omap2/pm.c
+++ b/arch/arm/mach-omap2/pm.c
@@ -266,7 +266,12 @@ static void __init omap4_init_voltages(v
static inline void omap_init_cpufreq(void)
{
- struct platform_device_info devinfo = { .name = "omap-cpufreq", };
+ struct platform_device_info devinfo = { };
+
+ if (!of_have_populated_dt())
+ devinfo.name = "omap-cpufreq";
+ else
+ devinfo.name = "cpufreq-cpu0";
platform_device_register_full(&devinfo);
}
@@ -300,10 +305,11 @@ int __init omap2_common_pm_late_init(voi
/* Smartreflex device init */
omap_devinit_smartreflex();
- /* cpufreq dummy device instantiation */
- omap_init_cpufreq();
}
+ /* cpufreq dummy device instantiation */
+ omap_init_cpufreq();
+
#ifdef CONFIG_SUSPEND
suspend_set_ops(&omap_pm_ops);
#endif

78
target/linux/omap/patches-3.12/805-ARM_dts_TWL4030_Add_missing_regulators.patch
View File

@ -1,78 +0,0 @@
From b86684d70f1e45cae4a85686e6f78d5db341fa85 Mon Sep 17 00:00:00 2001
From: Sebastian Reichel <sre@debian.org>
Date: Tue, 22 Oct 2013 22:49:37 +0000
Subject: ARM: dts: TWL4030: Add missing regulators
The twl4030.dtsi is missing some regulators. This patch adds
the missing ones and orders the regulators alphabetically.
Signed-off-by: Sebastian Reichel <sre@debian.org>
Signed-off-by: Benoit Cousson <bcousson@baylibre.com>
---
--- a/arch/arm/boot/dts/twl4030.dtsi
+++ b/arch/arm/boot/dts/twl4030.dtsi
@@ -23,6 +23,22 @@
compatible = "ti,twl4030-wdt";
};
+ vaux1: regulator-vaux1 {
+ compatible = "ti,twl4030-vaux1";
+ };
+
+ vaux2: regulator-vaux2 {
+ compatible = "ti,twl4030-vaux2";
+ };
+
+ vaux3: regulator-vaux3 {
+ compatible = "ti,twl4030-vaux3";
+ };
+
+ vaux4: regulator-vaux4 {
+ compatible = "ti,twl4030-vaux4";
+ };
+
vcc: regulator-vdd1 {
compatible = "ti,twl4030-vdd1";
regulator-min-microvolt = <600000>;
@@ -35,10 +51,20 @@
regulator-max-microvolt = <1800000>;
};
- vpll2: regulator-vpll2 {
- compatible = "ti,twl4030-vpll2";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
+ vio: regulator-vio {
+ compatible = "ti,twl4030-vio";
+ };
+
+ vintana1: regulator-vintana1 {
+ compatible = "ti,twl4030-vintana1";
+ };
+
+ vintana2: regulator-vintana2 {
+ compatible = "ti,twl4030-vintana2";
+ };
+
+ vintdig: regulator-vintdig {
+ compatible = "ti,twl4030-vintdig";
};
vmmc1: regulator-vmmc1 {
@@ -65,6 +91,16 @@
compatible = "ti,twl4030-vusb3v1";
};
+ vpll1: regulator-vpll1 {
+ compatible = "ti,twl4030-vpll1";
+ };
+
+ vpll2: regulator-vpll2 {
+ compatible = "ti,twl4030-vpll2";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
vsim: regulator-vsim {
compatible = "ti,twl4030-vsim";
regulator-min-microvolt = <1800000>;

22
target/linux/omap/patches-3.12/806-ARM_dts_TWL4030_Add_power_button_support.patch
View File

@ -1,22 +0,0 @@
From a3317d4f2fcd064071bc188cbbc2769dda73e487 Mon Sep 17 00:00:00 2001
From: Sebastian Reichel <sre@debian.org>
Date: Tue, 22 Oct 2013 22:49:43 +0000
Subject: ARM: dts: TWL4030: Add power button support
Enable support for the power button.
Signed-off-by: Sebastian Reichel <sre@debian.org>
Signed-off-by: Benoit Cousson <bcousson@baylibre.com>
---
--- a/arch/arm/boot/dts/twl4030.dtsi
+++ b/arch/arm/boot/dts/twl4030.dtsi
@@ -133,4 +133,9 @@
compatible = "ti,twl4030-pwmled";
#pwm-cells = <2>;
};
+
+ twl_pwrbutton: pwrbutton {
+ compatible = "ti,twl4030-pwrbutton";
+ interrupts = <8>;
+ };
};

26
target/linux/omap/patches-3.12/807-ARM_dts_AM33XX_Add_hwspinlock_node.patch
View File

@ -1,26 +0,0 @@
From d4cbe80db468dcfaa058f9f00a332784e5dff316 Mon Sep 17 00:00:00 2001
From: Suman Anna <s-anna@ti.com>
Date: Thu, 10 Oct 2013 21:15:35 +0000
Subject: ARM: dts: AM33XX: Add hwspinlock node
Add the hwspinlock device tree node for AM33xx family
of SoCs.
Signed-off-by: Suman Anna <s-anna@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
--- a/arch/arm/boot/dts/am33xx.dtsi
+++ b/arch/arm/boot/dts/am33xx.dtsi
@@ -278,6 +278,12 @@
status = "disabled";
};
+ hwspinlock: spinlock@480ca000 {
+ compatible = "ti,omap4-hwspinlock";
+ reg = <0x480ca000 0x1000>;
+ ti,hwmods = "spinlock";
+ };
+
wdt2: wdt@44e35000 {
compatible = "ti,omap3-wdt";
ti,hwmods = "wd_timer2";

52
target/linux/omap/patches-3.12/808-ARM_dts_AM33xx_Add_RNG_node.patch
View File

@ -1,52 +0,0 @@
From ed845d6b78bf32b396f7f1278eed0b87446934b1 Mon Sep 17 00:00:00 2001
From: Lokesh Vutla <lokeshvutla@ti.com>
Date: Thu, 29 Aug 2013 12:52:09 +0000
Subject: ARM: dts: AM33xx: Add RNG node
Add the AM33xx RNG module's device tree data.
Also add Documentation file describing the data
for the RNG module.
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
--- /dev/null
+++ b/Documentation/devicetree/bindings/hwrng/omap_rng.txt
@@ -0,0 +1,22 @@
+OMAP SoC HWRNG Module
+
+Required properties:
+
+- compatible : Should contain entries for this and backward compatible
+ RNG versions:
+ - "ti,omap2-rng" for OMAP2.
+ - "ti,omap4-rng" for OMAP4, OMAP5 and AM33XX.
+ Note that these two versions are incompatible.
+- ti,hwmods: Name of the hwmod associated with the RNG module
+- reg : Offset and length of the register set for the module
+- interrupts : the interrupt number for the RNG module.
+ Only used for "ti,omap4-rng".
+
+Example:
+/* AM335x */
+rng: rng@48310000 {
+ compatible = "ti,omap4-rng";
+ ti,hwmods = "rng";
+ reg = <0x48310000 0x2000>;
+ interrupts = <111>;
+};
--- a/arch/arm/boot/dts/am33xx.dtsi
+++ b/arch/arm/boot/dts/am33xx.dtsi
@@ -770,5 +770,12 @@
dma-names = "tx", "rx";
};
+ rng: rng@48310000 {
+ compatible = "ti,omap4-rng";
+ ti,hwmods = "rng";
+ reg = <0x48310000 0x2000>;
+ interrupts = <111>;
+ };
+
};
};

155
target/linux/omap/patches-3.12/900-wlcore-Add-support-for-DT-platform-data.patch
View File

@ -1,155 +0,0 @@
When running with DT, we no longer have a board file that can set up the
platform data for wlcore. Allow this data to be passed from DT.
Since some platforms use a gpio-irq, add support for passing either the
irq number or the gpio number. For the latter case, the driver will
request the gpio and convert it to the irq number. If an irq is
specified, it'll be used as is.
[Arik - the pdev_data pointer does not belong to us and is freed when
the device is released. Dereference to our private data first.]
Signed-off-by: Ido Yariv <ido@wizery.com>
Signed-off-by: Arik Nemtsov <arik@wizery.com>
---
drivers/net/wireless/ti/wlcore/sdio.c | 71 ++++++++++++++++++++++++++++++++---
include/linux/wl12xx.h | 3 +-
2 files changed, 67 insertions(+), 7 deletions(-)
--- a/drivers/net/wireless/ti/wlcore/sdio.c
+++ b/drivers/net/wireless/ti/wlcore/sdio.c
@@ -34,6 +34,7 @@
#include <linux/wl12xx.h>
#include <linux/pm_runtime.h>
#include <linux/printk.h>
+#include <linux/of.h>
#include "wlcore.h"
#include "wl12xx_80211.h"
@@ -214,6 +215,61 @@ static struct wl1271_if_operations sdio_
.set_block_size = wl1271_sdio_set_block_size,
};
+static const struct of_device_id wlcore_of_match[] = {
+ {
+ .compatible = "wlcore",
+ },
+ {}
+};
+MODULE_DEVICE_TABLE(of, wlcore_of_match);
+
+static struct wl12xx_platform_data *get_platform_data(struct device *dev)
+{
+ struct wl12xx_platform_data *pdata;
+ struct device_node *np;
+ u32 gpio;
+
+ pdata = wl12xx_get_platform_data();
+ if (!IS_ERR(pdata))
+ return kmemdup(pdata, sizeof(*pdata), GFP_KERNEL);
+
+ np = of_find_matching_node(NULL, wlcore_of_match);
+ if (!np) {
+ dev_err(dev, "No platform data set\n");
+ return NULL;
+ }
+
+ pdata = kzalloc(sizeof(*pdata), GFP_KERNEL);
+ if (!pdata) {
+ dev_err(dev, "Can't allocate platform data\n");
+ return NULL;
+ }
+
+ if (of_property_read_u32(np, "irq", &pdata->irq)) {
+ if (!of_property_read_u32(np, "gpio", &gpio) &&
+ !gpio_request_one(gpio, GPIOF_IN, "wlcore_irq")) {
+ pdata->gpio = gpio;
+ pdata->irq = gpio_to_irq(gpio);
+ }
+ }
+
+ /* Optional fields */
+ pdata->use_eeprom = of_property_read_bool(np, "use-eeprom");
+ of_property_read_u32(np, "board-ref-clock", &pdata->board_ref_clock);
+ of_property_read_u32(np, "board-tcxo-clock", &pdata->board_tcxo_clock);
+ of_property_read_u32(np, "platform-quirks", &pdata->platform_quirks);
+
+ return pdata;
+}
+
+static void del_platform_data(struct wl12xx_platform_data *pdata)
+{
+ if (pdata->gpio)
+ gpio_free(pdata->gpio);
+
+ kfree(pdata);
+}
+
static int wl1271_probe(struct sdio_func *func,
const struct sdio_device_id *id)
{
@@ -248,12 +304,9 @@ static int wl1271_probe(struct sdio_func
/* Use block mode for transferring over one block size of data */
func->card->quirks |= MMC_QUIRK_BLKSZ_FOR_BYTE_MODE;
- pdev_data->pdata = wl12xx_get_platform_data();
- if (IS_ERR(pdev_data->pdata)) {
- ret = PTR_ERR(pdev_data->pdata);
- dev_err(glue->dev, "missing wlan platform data: %d\n", ret);
+ pdev_data->pdata = get_platform_data(&func->dev);
+ if (!(pdev_data->pdata))
goto out_free_glue;
- }
/* if sdio can keep power while host is suspended, enable wow */
mmcflags = sdio_get_host_pm_caps(func);
@@ -282,7 +335,7 @@ static int wl1271_probe(struct sdio_func
if (!glue->core) {
dev_err(glue->dev, "can't allocate platform_device");
ret = -ENOMEM;
- goto out_free_glue;
+ goto out_free_pdata;
}
glue->core->dev.parent = &func->dev;
@@ -316,6 +369,9 @@ static int wl1271_probe(struct sdio_func
out_dev_put:
platform_device_put(glue->core);
+out_free_pdata:
+ del_platform_data(pdev_data->pdata);
+
out_free_glue:
kfree(glue);
@@ -329,11 +385,14 @@ out:
static void wl1271_remove(struct sdio_func *func)
{
struct wl12xx_sdio_glue *glue = sdio_get_drvdata(func);
+ struct wlcore_platdev_data *pdev_data = glue->core->dev.platform_data;
+ struct wl12xx_platform_data *pdata = pdev_data->pdata;
/* Undo decrement done above in wl1271_probe */
pm_runtime_get_noresume(&func->dev);
platform_device_unregister(glue->core);
+ del_platform_data(pdata);
kfree(glue);
}
--- a/include/linux/wl12xx.h
+++ b/include/linux/wl12xx.h
@@ -51,11 +51,12 @@ enum {
struct wl12xx_platform_data {
void (*set_power)(bool enable);
/* SDIO only: IRQ number if WLAN_IRQ line is used, 0 for SDIO IRQs */
+ int gpio;
int irq;
bool use_eeprom;
int board_ref_clock;
int board_tcxo_clock;
- unsigned long platform_quirks;
+ u32 platform_quirks;
bool pwr_in_suspend;
};

81
target/linux/omap/patches-3.12/920-arm-dts-am335x-evmsk-add-support-for-lcd-panel.patch
View File

@ -1,81 +0,0 @@
From 157c4071cb8a588c4e619b69447010a0ee68d844 Mon Sep 17 00:00:00 2001
From: Darren Etheridge <detheridge@ti.com>
Date: Thu, 17 Oct 2013 14:53:37 -0500
Subject: [PATCH 568/752] arm: dts: am335x-evmsk: add support for lcd panel
Add the necessary DT entries for probing the LCDC in fbdev and
setting the correct timings for the NHD-4.3 LCD panel.
---
arch/arm/boot/dts/am335x-evmsk.dts | 54 ++++++++++++++++++++++++++++++++++++
1 file changed, 54 insertions(+)
--- a/arch/arm/boot/dts/am335x-evmsk.dts
+++ b/arch/arm/boot/dts/am335x-evmsk.dts
@@ -35,6 +35,39 @@
pinctrl-names = "default";
pinctrl-0 = <&gpio_keys_s0 &clkout2_pin>;
+ lcd_pins_s0: lcd_pins_s0 {
+ pinctrl-single,pins = <
+ 0x20 0x01 /* gpmc_ad8.lcd_data16, OUTPUT | MODE1 */
+ 0x24 0x01 /* gpmc_ad9.lcd_data17, OUTPUT | MODE1 */
+ 0x28 0x01 /* gpmc_ad10.lcd_data18, OUTPUT | MODE1 */
+ 0x2c 0x01 /* gpmc_ad11.lcd_data19, OUTPUT | MODE1 */
+ 0x30 0x01 /* gpmc_ad12.lcd_data20, OUTPUT | MODE1 */
+ 0x34 0x01 /* gpmc_ad13.lcd_data21, OUTPUT | MODE1 */
+ 0x38 0x01 /* gpmc_ad14.lcd_data22, OUTPUT | MODE1 */
+ 0x3c 0x01 /* gpmc_ad15.lcd_data23, OUTPUT | MODE1 */
+ 0xa0 0x00 /* lcd_data0.lcd_data0, OUTPUT | MODE0 */
+ 0xa4 0x00 /* lcd_data1.lcd_data1, OUTPUT | MODE0 */
+ 0xa8 0x00 /* lcd_data2.lcd_data2, OUTPUT | MODE0 */
+ 0xac 0x00 /* lcd_data3.lcd_data3, OUTPUT | MODE0 */
+ 0xb0 0x00 /* lcd_data4.lcd_data4, OUTPUT | MODE0 */
+ 0xb4 0x00 /* lcd_data5.lcd_data5, OUTPUT | MODE0 */
+ 0xb8 0x00 /* lcd_data6.lcd_data6, OUTPUT | MODE0 */
+ 0xbc 0x00 /* lcd_data7.lcd_data7, OUTPUT | MODE0 */
+ 0xc0 0x00 /* lcd_data8.lcd_data8, OUTPUT | MODE0 */
+ 0xc4 0x00 /* lcd_data9.lcd_data9, OUTPUT | MODE0 */
+ 0xc8 0x00 /* lcd_data10.lcd_data10, OUTPUT | MODE0 */
+ 0xcc 0x00 /* lcd_data11.lcd_data11, OUTPUT | MODE0 */
+ 0xd0 0x00 /* lcd_data12.lcd_data12, OUTPUT | MODE0 */
+ 0xd4 0x00 /* lcd_data13.lcd_data13, OUTPUT | MODE0 */
+ 0xd8 0x00 /* lcd_data14.lcd_data14, OUTPUT | MODE0 */
+ 0xdc 0x00 /* lcd_data15.lcd_data15, OUTPUT | MODE0 */
+ 0xe0 0x00 /* lcd_vsync.lcd_vsync, OUTPUT | MODE0 */
+ 0xe4 0x00 /* lcd_hsync.lcd_hsync, OUTPUT | MODE0 */
+ 0xe8 0x00 /* lcd_pclk.lcd_pclk, OUTPUT | MODE0 */
+ 0xec 0x00 /* lcd_ac_bias_en.lcd_ac_bias_en, OUTPUT | MODE0 */
+ >;
+ };
+
user_leds_s0: user_leds_s0 {
pinctrl-single,pins = <
0x10 (PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_ad4.gpio1_4 */
@@ -255,6 +288,27 @@
};
};
+ lcdc: lcdc@4830e000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&lcd_pins_s0>;
+ status = "okay";
+ display-timings {
+ 480x272 {
+ hactive = <480>;
+ vactive = <272>;
+ hback-porch = <43>;
+ hfront-porch = <8>;
+ hsync-len = <4>;
+ vback-porch = <12>;
+ vfront-porch = <4>;
+ vsync-len = <10>;
+ clock-frequency = <9000000>;
+ hsync-active = <0>;
+ vsync-active = <0>;
+ };
+ };
+ };
+
sound {
compatible = "ti,da830-evm-audio";
ti,model = "AM335x-EVMSK";

32
target/linux/omap/patches-3.12/921-arm-dts-am335x-sk-add-touchscreen-support.patch
View File

@ -1,32 +0,0 @@
From 588b7a5db74c02bcf0b3ac57b6391debffbff74c Mon Sep 17 00:00:00 2001
From: Felipe Balbi <balbi@ti.com>
Date: Mon, 21 Oct 2013 15:06:54 -0500
Subject: [PATCH 582/752] arm: dts: am335x sk: add touchscreen support
Add missing nodes for the touchscreen available
on AM335x EVM SK.
Signed-off-by: Felipe Balbi <balbi@ti.com>
---
arch/arm/boot/dts/am335x-evmsk.dts | 10 ++++++++++
1 file changed, 10 insertions(+)
--- a/arch/arm/boot/dts/am335x-evmsk.dts
+++ b/arch/arm/boot/dts/am335x-evmsk.dts
@@ -513,6 +513,16 @@
vmmc-supply = <&vmmc_reg>;
};
+&tscadc {
+ status = "okay";
+ tsc {
+ ti,wires = <4>;
+ ti,x-plate-resistance = <200>;
+ ti,coordinate-readouts = <5>;
+ ti,wire-config = <0x00 0x11 0x22 0x33>;
+ };
+};
+
&gpio0 {
ti,no-reset-on-init;
};

71
target/linux/omap/patches-3.12/950-am335x-evmsk-wilink-dts.patch
View File

@ -1,71 +0,0 @@
--- a/arch/arm/boot/dts/am335x-evmsk.dts
+++ b/arch/arm/boot/dts/am335x-evmsk.dts
@@ -14,6 +14,7 @@
/dts-v1/;
#include "am33xx.dtsi"
+#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/pwm/pwm.h>
/ {
@@ -200,6 +201,26 @@
0x144 (PIN_INPUT_PULLDOWN | MUX_MODE4) /* rmii1_ref_clk.mcasp1_axr3 */
>;
};
+
+ wilink_pins: pinmux_wilink_pins {
+ pinctrl-single,pins = <
+ 0x74 (PIN_INPUT_PULLUP | MUX_MODE7) /* gpmc_wpn.gpio0_31 */
+ 0x7c (PIN_OUTPUT_PULLUP | MUX_MODE7) /* gpmc_csn0.gpio1_29 */
+ 0x80 (PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_csn1.mmc1_clk */
+ 0x84 (PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_csn2.mmc1_cmd */
+ 0x00 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad0.mmc1_dat0 */
+ 0x04 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad1.mmc1_dat1 */
+ 0x08 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad2.mmc1_dat2 */
+ 0x0c (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad3.mmc1_dat3 */
+ >;
+ };
+ };
+
+ wlan {
+ compatible = "wlcore";
+ gpio = <31>;
+
+ board-ref-clock = <4>;
};
ocp {
@@ -335,6 +356,16 @@
regulator-boot-on;
};
+ vmmc_wl: fixedregulator@2 {
+ compatible = "regulator-fixed";
+ regulator-name = "vmmc-wl";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ gpio = <&gpio1 29 0>;
+ startup-delay-us = <70000>;
+ enable-active-high;
+ };
+
leds {
pinctrl-names = "default";
pinctrl-0 = <&user_leds_s0>;
@@ -535,6 +566,16 @@
status = "okay";
};
+&mmc2 {
+ status = "okay";
+ vmmc-supply = <&vmmc_wl>;
+ bus-width = <4>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&wilink_pins>;
+ ti,non-removable;
+ keep-power-in-suspend;
+};
+
&mcasp1 {
pinctrl-names = "default";
pinctrl-0 = <&mcasp1_pins>;