remove support for kernel 2.6.21

SVN-Revision: 19452
owl
Hauke Mehrtens 2010-01-31 14:59:37 +00:00
parent 233e446804
commit 349fb7c742
7 changed files with 0 additions and 266 deletions

View File

@ -1,146 +0,0 @@
CONFIG_32BIT=y
# CONFIG_64BIT is not set
# CONFIG_64BIT_PHYS_ADDR is not set
CONFIG_ADM6996_SUPPORT=y
CONFIG_AMAZON_ASC_UART=y
CONFIG_AMAZON_MTD=y
CONFIG_AMAZON_NET_SW=y
CONFIG_AMAZON_PCI=y
CONFIG_AMAZON_WDT=y
CONFIG_AMAZON=y
# CONFIG_ARCH_HAS_ILOG2_U32 is not set
# CONFIG_ARCH_HAS_ILOG2_U64 is not set
CONFIG_BITREVERSE=y
CONFIG_CMDLINE="console=ttyS0,115200 rootfstype=squashfs,jffs2 init=/bin/sh"
CONFIG_CPU_BIG_ENDIAN=y
CONFIG_CPU_HAS_LLSC=y
CONFIG_CPU_HAS_PREFETCH=y
CONFIG_CPU_HAS_SYNC=y
# CONFIG_CPU_LITTLE_ENDIAN is not set
CONFIG_CPU_MIPS32_R1=y
# CONFIG_CPU_MIPS32_R2 is not set
CONFIG_CPU_MIPS32=y
# CONFIG_CPU_MIPS64_R1 is not set
# CONFIG_CPU_MIPS64_R2 is not set
CONFIG_CPU_MIPSR1=y
# CONFIG_CPU_NEVADA is not set
# CONFIG_CPU_R10000 is not set
# CONFIG_CPU_R3000 is not set
# CONFIG_CPU_R4300 is not set
# CONFIG_CPU_R4X00 is not set
# CONFIG_CPU_R5000 is not set
# CONFIG_CPU_R5432 is not set
# CONFIG_CPU_R6000 is not set
# CONFIG_CPU_R8000 is not set
# CONFIG_CPU_RM7000 is not set
# CONFIG_CPU_RM9000 is not set
# CONFIG_CPU_SB1 is not set
CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
CONFIG_CPU_SUPPORTS_HIGHMEM=y
# CONFIG_CPU_TX39XX is not set
# CONFIG_CPU_TX49XX is not set
# CONFIG_CPU_VR41XX is not set
# CONFIG_DDB5477 is not set
# CONFIG_DM9000 is not set
CONFIG_DMA_NEED_PCI_MAP_STATE=y
CONFIG_DMA_NONCOHERENT=y
CONFIG_EARLY_PRINTK=y
CONFIG_GENERIC_FIND_NEXT_BIT=y
# CONFIG_GENERIC_GPIO is not set
# CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ is not set
# CONFIG_GEN_RTC is not set
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAVE_STD_PC_SERIAL_PORT=y
CONFIG_HW_HAS_PCI=y
CONFIG_HW_RANDOM=y
# CONFIG_IDE is not set
CONFIG_INITRAMFS_SOURCE=""
CONFIG_IRQ_CPU=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
CONFIG_KALLSYMS=y
# CONFIG_MACH_DECSTATION is not set
# CONFIG_MACH_JAZZ is not set
# CONFIG_MACH_VR41XX is not set
# CONFIG_MIPS_ATLAS is not set
# CONFIG_MIPS_BOSPORUS is not set
# CONFIG_MIPS_COBALT is not set
# CONFIG_MIPS_DB1000 is not set
# CONFIG_MIPS_DB1100 is not set
# CONFIG_MIPS_DB1200 is not set
# CONFIG_MIPS_DB1500 is not set
# CONFIG_MIPS_DB1550 is not set
# CONFIG_MIPS_EV64120 is not set
CONFIG_MIPS_L1_CACHE_SHIFT=5
# CONFIG_MIPS_MALTA is not set
# CONFIG_MIPS_MIRAGE is not set
CONFIG_MIPS_MT_DISABLED=y
# CONFIG_MIPS_MT_SMP is not set
# CONFIG_MIPS_MT_SMTC is not set
# CONFIG_MIPS_MTX1 is not set
# CONFIG_MIPS_PB1000 is not set
# CONFIG_MIPS_PB1100 is not set
# CONFIG_MIPS_PB1200 is not set
# CONFIG_MIPS_PB1500 is not set
# CONFIG_MIPS_PB1550 is not set
# CONFIG_MIPS_SEAD is not set
# CONFIG_MIPS_SIM is not set
# CONFIG_MIPS_VPE_LOADER is not set
# CONFIG_MIPS_XXS1500 is not set
CONFIG_MIPS=y
# CONFIG_MOMENCO_JAGUAR_ATX is not set
# CONFIG_MOMENCO_OCELOT_3 is not set
# CONFIG_MOMENCO_OCELOT_C is not set
# CONFIG_MOMENCO_OCELOT_G is not set
# CONFIG_MOMENCO_OCELOT is not set
CONFIG_MTD_AMAZON_BUS_WIDTH_16=y
# CONFIG_MTD_AMAZON_BUS_WIDTH_32 is not set
# CONFIG_MTD_AMAZON_BUS_WIDTH_8 is not set
# CONFIG_MTD_AMAZON_FLASH_SIZE_16 is not set
# CONFIG_MTD_AMAZON_FLASH_SIZE_2 is not set
CONFIG_MTD_AMAZON_FLASH_SIZE_4=y
# CONFIG_MTD_AMAZON_FLASH_SIZE_8 is not set
CONFIG_MTD_CFI_ADV_OPTIONS=y
# CONFIG_MTD_CFI_GEOMETRY is not set
# CONFIG_MTD_CFI_INTELEXT is not set
# CONFIG_MTD_OBSOLETE_CHIPS is not set
CONFIG_MTD_PHYSMAP_BANKWIDTH=0
CONFIG_MTD_PHYSMAP_LEN=0x0
CONFIG_MTD_PHYSMAP_START=0x0
CONFIG_MTD_PHYSMAP=y
CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-3
# CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set
CONFIG_MTD_REDBOOT_PARTS=y
# CONFIG_NET_PCI is not set
CONFIG_NET_SCH_FIFO=y
# CONFIG_NET_VENDOR_3COM is not set
# CONFIG_PCIPCWATCHDOG is not set
# CONFIG_PMC_YOSEMITE is not set
# CONFIG_PNPACPI is not set
# CONFIG_PNX8550_JBS is not set
# CONFIG_PNX8550_STB810 is not set
# CONFIG_RTC is not set
CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
# CONFIG_SERIAL_8250 is not set
# CONFIG_SGI_IP22 is not set
# CONFIG_SGI_IP27 is not set
# CONFIG_SGI_IP32 is not set
# CONFIG_SIBYTE_BIGSUR is not set
# CONFIG_SIBYTE_CARMEL is not set
# CONFIG_SIBYTE_CRHINE is not set
# CONFIG_SIBYTE_CRHONE is not set
# CONFIG_SIBYTE_LITTLESUR is not set
# CONFIG_SIBYTE_PTSWARM is not set
# CONFIG_SIBYTE_RHONE is not set
# CONFIG_SIBYTE_SENTOSA is not set
# CONFIG_SIBYTE_SWARM is not set
CONFIG_SYS_HAS_CPU_MIPS32_R1=y
CONFIG_SYS_HAS_EARLY_PRINTK=y
CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y
# CONFIG_TOSHIBA_JMR3927 is not set
# CONFIG_TOSHIBA_RBTX4927 is not set
# CONFIG_TOSHIBA_RBTX4938 is not set
CONFIG_TRAD_SIGNALS=y
# CONFIG_UNUSED_SYMBOLS is not set

View File

@ -1,10 +0,0 @@
--- a/drivers/char/watchdog/Makefile
+++ b/drivers/char/watchdog/Makefile
@@ -74,6 +74,7 @@ obj-$(CONFIG_WATCHDOG_RTAS) += wdrtas.o
# MIPS Architecture
obj-$(CONFIG_INDYDOG) += indydog.o
obj-$(CONFIG_WDT_RM9K_GPI) += rm9k_wdt.o
+obj-$(CONFIG_AMAZON_WDT) += amazon_wdt.o
# S390 Architecture

View File

@ -1,59 +0,0 @@
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -159,6 +159,17 @@ config BASLER_EXCITE_PROTOTYPE
note that a kernel built with this option selected will not be
able to run on normal units.
+config AMAZON
+ bool "Amazon support (EXPERIMENTAL)"
+ depends on EXPERIMENTAL
+ select DMA_NONCOHERENT
+ select IRQ_CPU
+ select SYS_HAS_CPU_MIPS32_R1
+ select HAVE_STD_PC_SERIAL_PORT
+ select SYS_SUPPORTS_BIG_ENDIAN
+ select SYS_SUPPORTS_32BIT_KERNEL
+ select SYS_HAS_EARLY_PRINTK
+
config MIPS_COBALT
bool "Cobalt Server"
select DMA_NONCOHERENT
@@ -823,6 +834,7 @@ config TOSHIBA_RBTX4938
endchoice
+source "arch/mips/amazon/Kconfig"
source "arch/mips/ddb5xxx/Kconfig"
source "arch/mips/gt64120/ev64120/Kconfig"
source "arch/mips/jazz/Kconfig"
--- a/arch/mips/Makefile
+++ b/arch/mips/Makefile
@@ -267,6 +267,13 @@ libs-$(CONFIG_MIPS_XXS1500) += arch/mips
load-$(CONFIG_MIPS_XXS1500) += 0xffffffff80100000
#
+# Infineon AMAZON
+#
+core-$(CONFIG_AMAZON) += arch/mips/amazon/
+cflags-$(CONFIG_AMAZON) += -Iinclude/asm-mips/mach-amazon
+load-$(CONFIG_AMAZON) += 0xffffffff80002000
+
+#
# Cobalt Server
#
core-$(CONFIG_MIPS_COBALT) += arch/mips/cobalt/
--- a/include/asm-mips/bootinfo.h
+++ b/include/asm-mips/bootinfo.h
@@ -213,6 +213,12 @@
#define MACH_GROUP_NEC_EMMA2RH 25 /* NEC EMMA2RH (was 23) */
#define MACH_NEC_MARKEINS 0 /* NEC EMMA2RH Mark-eins */
+/*
+ * Valid machtype for group Infineon
+ */
+#define MACH_GROUP_INFINEON 27
+#define MACH_INFINEON_AMAZON 0
+
#define CL_SIZE COMMAND_LINE_SIZE
const char *get_system_type(void);

View File

@ -1,7 +0,0 @@
--- a/drivers/mtd/maps/Makefile
+++ b/drivers/mtd/maps/Makefile
@@ -72,3 +72,4 @@ obj-$(CONFIG_MTD_PLATRAM) += plat-ram.o
obj-$(CONFIG_MTD_OMAP_NOR) += omap_nor.o
obj-$(CONFIG_MTD_MTX1) += mtx-1_flash.o
obj-$(CONFIG_MTD_TQM834x) += tqm834x.o
+obj-$(CONFIG_AMAZON_MTD) += amazon.o

View File

@ -1,9 +0,0 @@
--- a/drivers/net/Makefile
+++ b/drivers/net/Makefile
@@ -219,3 +219,6 @@ obj-$(CONFIG_NETCONSOLE) += netconsole.o
obj-$(CONFIG_FS_ENET) += fs_enet/
obj-$(CONFIG_NETXEN_NIC) += netxen/
+
+obj-$(CONFIG_AMAZON_NET_SW) += amazon_sw.o
+obj-$(CONFIG_ADM6996_SUPPORT) += admmod.o

View File

@ -1,10 +0,0 @@
--- a/drivers/serial/Makefile
+++ b/drivers/serial/Makefile
@@ -5,6 +5,7 @@
#
obj-$(CONFIG_SERIAL_CORE) += serial_core.o
+obj-$(CONFIG_AMAZON_ASC_UART) += amazon_asc.o
obj-$(CONFIG_SERIAL_21285) += 21285.o
obj-$(CONFIG_SERIAL_8250) += 8250.o
obj-$(CONFIG_SERIAL_8250_PNP) += 8250_pnp.o

View File

@ -1,25 +0,0 @@
--- a/drivers/mtd/chips/cfi_cmdset_0002.c
+++ b/drivers/mtd/chips/cfi_cmdset_0002.c
@@ -1007,7 +1007,9 @@ static int __xipram do_write_oneword(str
int ret = 0;
map_word oldd;
int retry_cnt = 0;
-
+#ifdef CONFIG_AMAZON
+ adr ^= 2;
+#endif
adr += chip->start;
spin_lock(chip->mutex);
@@ -1291,7 +1293,11 @@ static int __xipram do_write_buffer(stru
z = 0;
while(z < words * map_bankwidth(map)) {
datum = map_word_load(map, buf);
+#ifdef CONFIG_AMAZON
+ map_write(map, datum, (adr + z) ^ 0x2);
+#else
map_write(map, datum, adr + z);
+#endif
z += map_bankwidth(map);
buf += map_bankwidth(map);