mac80211: remove obsolete check for enable_ht

Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 40694
owl
Felix Fietkau 2014-05-03 21:18:53 +00:00
parent bc86119785
commit 32a806cf8a
1 changed files with 173 additions and 175 deletions

View File

@ -82,190 +82,188 @@ mac80211_hostapd_setup_base() {
[ "$auto_channel" -gt 0 ] && channel=acs_survey
[ "$enable_ht" -gt 0 ] && {
json_get_vars noscan htmode
json_get_values ht_capab_list ht_capab
json_get_vars noscan htmode
json_get_values ht_capab_list ht_capab
ieee80211n=1
ht_capab=
case "$htmode" in
VHT20|HT20) ;;
HT40*|VHT40|VHT80|VHT160)
case "$hwmode" in
a)
case "$(( ($channel / 4) % 2 ))" in
1) ht_capab="[HT40+]";;
0) ht_capab="[HT40-]";;
esac
;;
*)
case "$htmode" in
HT40+) ht_capab="[HT40+]";;
HT40-) ht_capab="[HT40-]";;
*)
if [ "$channel" -lt 7 ]; then
ht_capab="[HT40+]"
else
ht_capab="[HT40-]"
fi
;;
esac
;;
esac
[ "$auto_channel" -gt 0 ] && ht_capab="[HT40+]"
;;
*) ieee80211n= ;;
esac
ieee80211n=1
ht_capab=
case "$htmode" in
VHT20|HT20) ;;
HT40*|VHT40|VHT80|VHT160)
case "$hwmode" in
a)
case "$(( ($channel / 4) % 2 ))" in
1) ht_capab="[HT40+]";;
0) ht_capab="[HT40-]";;
esac
;;
*)
case "$htmode" in
HT40+) ht_capab="[HT40+]";;
HT40-) ht_capab="[HT40-]";;
*)
if [ "$channel" -lt 7 ]; then
ht_capab="[HT40+]"
else
ht_capab="[HT40-]"
fi
;;
esac
;;
esac
[ "$auto_channel" -gt 0 ] && ht_capab="[HT40+]"
;;
*) ieee80211n= ;;
esac
[ -n "$ieee80211n" ] && {
append base_cfg "ieee80211n=1" "$N"
[ -n "$ieee80211n" ] && {
append base_cfg "ieee80211n=1" "$N"
json_get_vars \
ldpc:1 \
greenfield:1 \
short_gi_20:1 \
short_gi_40:1 \
tx_stbc:1 \
rx_stbc:3 \
dsss_cck_40:1
json_get_vars \
ldpc:1 \
greenfield:1 \
short_gi_20:1 \
short_gi_40:1 \
tx_stbc:1 \
rx_stbc:3 \
dsss_cck_40:1
ht_cap_mask=0
for cap in $(iw phy "$phy" info | grep 'Capabilities:' | cut -d: -f2); do
ht_cap_mask="$(($ht_cap_mask | $cap))"
done
ht_cap_mask=0
for cap in $(iw phy "$phy" info | grep 'Capabilities:' | cut -d: -f2); do
ht_cap_mask="$(($ht_cap_mask | $cap))"
done
cap_rx_stbc=$((($ht_cap_mask >> 8) & 3))
[ "$rx_stbc" -lt "$cap_rx_stbc" ] && cap_rx_stbc="$rx_stbc"
ht_cap_mask="$(( ($ht_cap_mask & ~(0x300)) | ($cap_rx_stbc << 8) ))"
cap_rx_stbc=$((($ht_cap_mask >> 8) & 3))
[ "$rx_stbc" -lt "$cap_rx_stbc" ] && cap_rx_stbc="$rx_stbc"
ht_cap_mask="$(( ($ht_cap_mask & ~(0x300)) | ($cap_rx_stbc << 8) ))"
mac80211_add_capabilities ht_capab_flags $ht_cap_mask \
LDPC:0x1::$ldpc \
GF:0x10::$greenfield \
SHORT-GI-20:0x20::$short_gi_20 \
SHORT-GI-40:0x40::$short_gi_40 \
TX-STBC:0x80::$max_tx_stbc \
RX-STBC1:0x300:0x100:1 \
RX-STBC12:0x300:0x200:1 \
RX-STBC123:0x300:0x300:1 \
DSSS_CCK-40:0x1000::$dsss_cck_40
mac80211_add_capabilities ht_capab_flags $ht_cap_mask \
LDPC:0x1::$ldpc \
GF:0x10::$greenfield \
SHORT-GI-20:0x20::$short_gi_20 \
SHORT-GI-40:0x40::$short_gi_40 \
TX-STBC:0x80::$max_tx_stbc \
RX-STBC1:0x300:0x100:1 \
RX-STBC12:0x300:0x200:1 \
RX-STBC123:0x300:0x300:1 \
DSSS_CCK-40:0x1000::$dsss_cck_40
[ -n "$ht_capab" ] && append base_cfg "ht_capab=$ht_capab$ht_capab_flags" "$N"
}
# 802.11ac
enable_ac=0
idx="$channel"
case "$htmode" in
VHT20) enable_ac=1;;
VHT40)
case "$(( ($channel / 4) % 2 ))" in
1) idx=$(($channel + 2));;
0) idx=$(($channel - 2));;
esac
enable_ac=1
append base_cfg "vht_oper_chwidth=0" "$N"
append base_cfg "vht_oper_centr_freq_seg0_idx=$idx" "$N"
;;
VHT80)
case "$(( ($channel / 4) % 2 ))" in
1) idx=$(($channel + 6));;
2) idx=$(($channel + 2));;
3) idx=$(($channel - 2));;
0) idx=$(($channel - 6));;
esac
enable_ac=1
append base_cfg "vht_oper_chwidth=1" "$N"
append base_cfg "vht_oper_centr_freq_seg0_idx=$idx" "$N"
;;
VHT160)
case "$channel" in
36|40|44|48|52|56|60|64) idx=50;;
100|104|108|112|116|120|124|128) idx=114;;
esac
enable_ac=1
append base_cfg "vht_oper_chwidth=2" "$N"
append base_cfg "vht_oper_centr_freq_seg0_idx=$idx" "$N"
;;
esac
if [ "$enable_ac" != "0" ]; then
json_get_vars \
rxldpc:1 \
short_gi_80:1 \
short_gi_160:1 \
tx_stbc_2by1:1 \
su_beamformer:1 \
su_beamformee:1 \
mu_beamformer:1 \
mu_beamformee:1 \
vht_txop_ps:1 \
htc_vht:1 \
rx_antenna_pattern:1 \
tx_antenna_pattern:1 \
vht_max_mpdu:11454 \
rx_stbc:4 \
vht_link_adapt:3 \
vht160:2
append base_cfg "ieee80211ac=1" "$N"
vht_cap=0
for cap in $(iw phy "$phy" info | awk -F "[()]" '/VHT Capabilities/ { print $2 }'); do
vht_cap="$(($vht_cap | $cap))"
done
cap_rx_stbc=$((($vht_cap >> 8) & 7))
[ "$rx_stbc" -lt "$cap_rx_stbc" ] && cap_rx_stbc="$rx_stbc"
ht_cap_mask="$(( ($vht_cap & ~(0x700)) | ($cap_rx_stbc << 8) ))"
mac80211_add_capabilities vht_capab $vht_cap \
RXLDPC:0x10::$rxldpc \
SHORT-GI-80:0x20::$short_gi_80 \
SHORT-GI-160:0x40::$short_gi_160 \
TX-STBC-2BY1:0x80::$tx_stbc \
SU-BEAMFORMER:0x800::$su_beamformer \
SU-BEAMFORMEE:0x1000::$su_beamformee \
MU-BEAMFORMER:0x80000::$mu_beamformer \
MU-BEAMFORMEE:0x100000::$mu_beamformee \
VHT-TXOP-PS:0x200000::$vht_txop_ps \
HTC-VHT:0x400000::$htc_vht \
RX-ANTENNA-PATTERN:0x10000000::$rx_antenna_pattern \
TX-ANTENNA-PATTERN:0x20000000::$tx_antenna_pattern \
RX-STBC1:0x700:0x100:1 \
RX-STBC12:0x700:0x200:1 \
RX-STBC123:0x700:0x300:1 \
RX-STBC1234:0x700:0x400:1 \
# supported Channel widths
vht160_hw=0
[ "$(($vht_cap & 12))" -eq 4 -a 1 -le "$vht160" ] && \
vht160_hw=1
[ "$(($vht_cap & 12))" -eq 8 -a 2 -le "$vht160" ] && \
vht160_hw=2
[ "$vht160_hw" = 1 ] && vht_capab="$vht_capab[VHT160]"
[ "$vht160_hw" = 2 ] && vht_capab="$vht_capab[VHT160-80PLUS80]"
# maximum MPDU length
vht_max_mpdu_hw=3895
[ "$(($vht_cap & 3))" -ge 1 -a 7991 -le "$vht_max_mpdu" ] && \
vht_max_mpdu_hw=7991
[ "$(($vht_cap & 3))" -ge 2 -a 11454 -le "$vht_max_mpdu" ] && \
vht_max_mpdu_hw=11454
[ "$vht_max_mpdu_hw" != 3895 ] && \
vht_capab="$vht_capab[MAX-MPDU-$vht_max_mpdu_hw]"
# whether or not the STA supports link adaptation using VHT variant
vht_link_adapt_hw=0
[ "$(($vht_cap & 201326592))" -ge 134217728 -a 2 -le "$vht_link_adapt" ] && \
vht_link_adapt_hw=2
[ "$(($vht_cap & 201326592))" -ge 201326592 -a 3 -le "$vht_link_adapt" ] && \
vht_link_adapt_hw=3
[ "$vht_link_adapt_hw" != 0 ] && \
vht_capab="$vht_capab[VHT-LINK-ADAPT-$vht_link_adapt_hw]"
[ -n "$vht_capab" ] && append base_cfg "vht_capab=$vht_capab" "$N"
fi
[ -n "$ht_capab" ] && append base_cfg "ht_capab=$ht_capab$ht_capab_flags" "$N"
}
# 802.11ac
enable_ac=0
idx="$channel"
case "$htmode" in
VHT20) enable_ac=1;;
VHT40)
case "$(( ($channel / 4) % 2 ))" in
1) idx=$(($channel + 2));;
0) idx=$(($channel - 2));;
esac
enable_ac=1
append base_cfg "vht_oper_chwidth=0" "$N"
append base_cfg "vht_oper_centr_freq_seg0_idx=$idx" "$N"
;;
VHT80)
case "$(( ($channel / 4) % 2 ))" in
1) idx=$(($channel + 6));;
2) idx=$(($channel + 2));;
3) idx=$(($channel - 2));;
0) idx=$(($channel - 6));;
esac
enable_ac=1
append base_cfg "vht_oper_chwidth=1" "$N"
append base_cfg "vht_oper_centr_freq_seg0_idx=$idx" "$N"
;;
VHT160)
case "$channel" in
36|40|44|48|52|56|60|64) idx=50;;
100|104|108|112|116|120|124|128) idx=114;;
esac
enable_ac=1
append base_cfg "vht_oper_chwidth=2" "$N"
append base_cfg "vht_oper_centr_freq_seg0_idx=$idx" "$N"
;;
esac
if [ "$enable_ac" != "0" ]; then
json_get_vars \
rxldpc:1 \
short_gi_80:1 \
short_gi_160:1 \
tx_stbc_2by1:1 \
su_beamformer:1 \
su_beamformee:1 \
mu_beamformer:1 \
mu_beamformee:1 \
vht_txop_ps:1 \
htc_vht:1 \
rx_antenna_pattern:1 \
tx_antenna_pattern:1 \
vht_max_mpdu:11454 \
rx_stbc:4 \
vht_link_adapt:3 \
vht160:2
append base_cfg "ieee80211ac=1" "$N"
vht_cap=0
for cap in $(iw phy "$phy" info | awk -F "[()]" '/VHT Capabilities/ { print $2 }'); do
vht_cap="$(($vht_cap | $cap))"
done
cap_rx_stbc=$((($vht_cap >> 8) & 7))
[ "$rx_stbc" -lt "$cap_rx_stbc" ] && cap_rx_stbc="$rx_stbc"
ht_cap_mask="$(( ($vht_cap & ~(0x700)) | ($cap_rx_stbc << 8) ))"
mac80211_add_capabilities vht_capab $vht_cap \
RXLDPC:0x10::$rxldpc \
SHORT-GI-80:0x20::$short_gi_80 \
SHORT-GI-160:0x40::$short_gi_160 \
TX-STBC-2BY1:0x80::$tx_stbc \
SU-BEAMFORMER:0x800::$su_beamformer \
SU-BEAMFORMEE:0x1000::$su_beamformee \
MU-BEAMFORMER:0x80000::$mu_beamformer \
MU-BEAMFORMEE:0x100000::$mu_beamformee \
VHT-TXOP-PS:0x200000::$vht_txop_ps \
HTC-VHT:0x400000::$htc_vht \
RX-ANTENNA-PATTERN:0x10000000::$rx_antenna_pattern \
TX-ANTENNA-PATTERN:0x20000000::$tx_antenna_pattern \
RX-STBC1:0x700:0x100:1 \
RX-STBC12:0x700:0x200:1 \
RX-STBC123:0x700:0x300:1 \
RX-STBC1234:0x700:0x400:1 \
# supported Channel widths
vht160_hw=0
[ "$(($vht_cap & 12))" -eq 4 -a 1 -le "$vht160" ] && \
vht160_hw=1
[ "$(($vht_cap & 12))" -eq 8 -a 2 -le "$vht160" ] && \
vht160_hw=2
[ "$vht160_hw" = 1 ] && vht_capab="$vht_capab[VHT160]"
[ "$vht160_hw" = 2 ] && vht_capab="$vht_capab[VHT160-80PLUS80]"
# maximum MPDU length
vht_max_mpdu_hw=3895
[ "$(($vht_cap & 3))" -ge 1 -a 7991 -le "$vht_max_mpdu" ] && \
vht_max_mpdu_hw=7991
[ "$(($vht_cap & 3))" -ge 2 -a 11454 -le "$vht_max_mpdu" ] && \
vht_max_mpdu_hw=11454
[ "$vht_max_mpdu_hw" != 3895 ] && \
vht_capab="$vht_capab[MAX-MPDU-$vht_max_mpdu_hw]"
# whether or not the STA supports link adaptation using VHT variant
vht_link_adapt_hw=0
[ "$(($vht_cap & 201326592))" -ge 134217728 -a 2 -le "$vht_link_adapt" ] && \
vht_link_adapt_hw=2
[ "$(($vht_cap & 201326592))" -ge 201326592 -a 3 -le "$vht_link_adapt" ] && \
vht_link_adapt_hw=3
[ "$vht_link_adapt_hw" != 0 ] && \
vht_capab="$vht_capab[VHT-LINK-ADAPT-$vht_link_adapt_hw]"
[ -n "$vht_capab" ] && append base_cfg "vht_capab=$vht_capab" "$N"
fi
hostapd_prepare_device_config "$hostapd_conf_file" nl80211
cat >> "$hostapd_conf_file" <<EOF
${channel:+channel=$channel}