mirror of https://github.com/hak5/openwrt-owl.git
ar71xx: add support for Nokia WI2A-AC200i
Specifications: - SoC: Qualcomm QCA9558 (720 MHz) - RAM: 256MB - Storage: 1MB NOR, 128 MB NAND flash - Ethernet: 1x1000M Installation: 1. Connect to serial console on the board 2. Boot initramfs image over u-boot 3. Copy image to the device and run sysupgrade Installation without serial console is not supported at this time Signed-off-by: Felix Fietkau <nbd@nbd.name>owl
Felix Fietkau
parent
2af10c30fe
commit
2c9aff289e
|
|
@ -824,6 +824,12 @@ r6100)
|
|||
ucidef_set_led_usbdev "usb" "USB" "netgear:blue:usb" "1-1"
|
||||
ucidef_set_led_wlan "wlan" "WLAN" "netgear:blue:wlan" "phy1tpt"
|
||||
;;
|
||||
wi2a-ac200i)
|
||||
ucidef_set_led_default "power" "Power (green)" "nokia:green:power" "1"
|
||||
ucidef_set_led_default "wan" "Ethernet LED (green)" "nokia:green:wan" "1"
|
||||
ucidef_set_led_wlan "wlan5g" "WLAN" "nokia:green:wlan-5g" "phy0tpt"
|
||||
ucidef_set_led_wlan "wlan2g" "WLAN" "nokia:green:wlan-2g" "phy1tpt"
|
||||
;;
|
||||
wndr3700v4|\
|
||||
wndr4300)
|
||||
ucidef_set_led_switch "wan-green" "WAN (green)" "netgear:green:wan" "switch0" "0x20" "0x08"
|
||||
|
|
|
|||
|
|
@ -128,6 +128,7 @@ ar71xx_setup_interfaces()
|
|||
tl-wr902ac-v1|\
|
||||
tube2h|\
|
||||
unifiac-lite|\
|
||||
wi2a-ac200i|\
|
||||
wndap360|\
|
||||
wp543)
|
||||
ucidef_set_interface_lan "eth0"
|
||||
|
|
|
|||
|
|
@ -459,6 +459,9 @@ get_status_led() {
|
|||
airgatewaypro)
|
||||
status_led="ubnt:white:status"
|
||||
;;
|
||||
wi2a-ac200i)
|
||||
status_led="nokia:green:ctrl"
|
||||
;;
|
||||
whr-g301n|\
|
||||
whr-hp-g300n|\
|
||||
whr-hp-gn|\
|
||||
|
|
@ -529,6 +532,9 @@ set_state() {
|
|||
local n=$(fw_printenv activeregion | cut -d = -f 2)
|
||||
fw_setenv "image${n}trynum" 0
|
||||
;;
|
||||
wi2a-ac200i)
|
||||
fw_setenv PKRstCnt 0
|
||||
;;
|
||||
esac
|
||||
;;
|
||||
esac
|
||||
|
|
|
|||
|
|
@ -111,6 +111,9 @@ case "$FIRMWARE" in
|
|||
unifiac-pro)
|
||||
ath10kcal_extract "EEPROM" 20480 2116
|
||||
;;
|
||||
wi2a-ac200i)
|
||||
ath10kcal_extract "ART" 20480 2116
|
||||
;;
|
||||
esac
|
||||
;;
|
||||
"ath10k/cal-pci-0000:01:00.0.bin")
|
||||
|
|
|
|||
|
|
@ -1231,6 +1231,9 @@ ar71xx_board_detect() {
|
|||
"WeIO"*)
|
||||
name="weio"
|
||||
;;
|
||||
*"WI2A-AC200i")
|
||||
name="wi2a-ac200i"
|
||||
;;
|
||||
*"WHR-G301N")
|
||||
name="whr-g301n"
|
||||
;;
|
||||
|
|
|
|||
|
|
@ -534,6 +534,7 @@ platform_check_image() {
|
|||
nbg6716|\
|
||||
r6100|\
|
||||
rambutan|\
|
||||
wi2a-ac200i|\
|
||||
wndr3700v4|\
|
||||
wndr4300)
|
||||
nand_do_platform_check $board $1
|
||||
|
|
@ -708,6 +709,7 @@ platform_pre_upgrade() {
|
|||
rb-2011uias-2hnd|\
|
||||
rb-sxt2n|\
|
||||
rb-sxt5n|\
|
||||
wi2a-ac200i|\
|
||||
wndr3700v4|\
|
||||
wndr4300)
|
||||
nand_do_upgrade "$1"
|
||||
|
|
@ -743,6 +745,23 @@ platform_nand_pre_upgrade() {
|
|||
mtd erase kernel
|
||||
tar xf "$1" sysupgrade-routerboard/kernel -O | nandwrite -o "$fw_mtd" -
|
||||
;;
|
||||
wi2a-ac200i)
|
||||
case "$(fw_printenv -n dualPartition)" in
|
||||
imgA)
|
||||
fw_setenv dualPartition imgB
|
||||
fw_setenv ActImg NokiaImageB
|
||||
;;
|
||||
imgB)
|
||||
fw_setenv dualPartition imgA
|
||||
fw_setenv ActImg NokiaImageA
|
||||
;;
|
||||
esac
|
||||
ubiblock -r /dev/ubiblock0_0 2>/dev/null >/dev/null
|
||||
rm -f /dev/ubiblock0_0
|
||||
ubidetach -d 0 2>/dev/null >/dev/null
|
||||
CI_UBIPART=ubi_alt
|
||||
CI_KERNPART=kernel_alt
|
||||
;;
|
||||
esac
|
||||
}
|
||||
|
||||
|
|
|
|||
|
|
@ -223,6 +223,7 @@ CONFIG_ATH79_MACH_UBNT=y
|
|||
CONFIG_ATH79_MACH_UBNT_UNIFIAC=y
|
||||
CONFIG_ATH79_MACH_UBNT_XM=y
|
||||
CONFIG_ATH79_MACH_WEIO=y
|
||||
# CONFIG_ATH79_MACH_WI2A_AC200I is not set
|
||||
CONFIG_ATH79_MACH_WHR_HP_G300N=y
|
||||
CONFIG_ATH79_MACH_WLAE_AG300N=y
|
||||
CONFIG_ATH79_MACH_WLR8100=y
|
||||
|
|
|
|||
|
|
@ -221,6 +221,7 @@ CONFIG_ATH79_MACH_UBNT=y
|
|||
CONFIG_ATH79_MACH_UBNT_UNIFIAC=y
|
||||
CONFIG_ATH79_MACH_UBNT_XM=y
|
||||
CONFIG_ATH79_MACH_WEIO=y
|
||||
# CONFIG_ATH79_MACH_WI2A_AC200I is not set
|
||||
CONFIG_ATH79_MACH_WHR_HP_G300N=y
|
||||
CONFIG_ATH79_MACH_WLAE_AG300N=y
|
||||
CONFIG_ATH79_MACH_WLR8100=y
|
||||
|
|
|
|||
|
|
@ -8,6 +8,17 @@ config ATH79_MACH_A60
|
|||
select ATH79_DEV_WMAC
|
||||
select ATH79_DEV_USB
|
||||
|
||||
config ATH79_MACH_WI2A_AC200I
|
||||
bool "Nokia WI2A-AC200i support"
|
||||
select SOC_QCA955X
|
||||
select ATH79_DEV_ETH
|
||||
select ATH79_DEV_GPIO_BUTTONS
|
||||
select ATH79_DEV_LEDS_GPIO
|
||||
select ATH79_DEV_M25P80
|
||||
select ATH79_DEV_NFC
|
||||
select ATH79_DEV_WMAC
|
||||
select ATH79_DEV_USB
|
||||
|
||||
config ATH79_MACH_ALFA_AP120C
|
||||
bool "ALFA Network AP120C board support"
|
||||
select ATH79_DEV_AP9X_PCI if PCI
|
||||
|
|
|
|||
|
|
@ -39,6 +39,7 @@ obj-$(CONFIG_ATH79_ROUTERBOOT) += routerboot.o
|
|||
# Machines
|
||||
#
|
||||
obj-$(CONFIG_ATH79_MACH_A60) += mach-a60.o
|
||||
obj-$(CONFIG_ATH79_MACH_WI2A_AC200I) += mach-wi2a-ac200i.o
|
||||
obj-$(CONFIG_ATH79_MACH_ALFA_AP120C) += mach-alfa-ap120c.o
|
||||
obj-$(CONFIG_ATH79_MACH_ALFA_AP96) += mach-alfa-ap96.o
|
||||
obj-$(CONFIG_ATH79_MACH_ALFA_NX) += mach-alfa-nx.o
|
||||
|
|
|
|||
|
|
@ -0,0 +1,217 @@
|
|||
/*
|
||||
* Nokia WI2A-AC200i support
|
||||
*
|
||||
* Copyright (c) 2012 Qualcomm Atheros
|
||||
* Copyright (c) 2012-2013 Gabor Juhos <juhosg@openwrt.org>
|
||||
* Copyright (c) 2017 Felix Fietkau <nbd@nbd.name>
|
||||
*
|
||||
* Permission to use, copy, modify, and/or distribute this software for any
|
||||
* purpose with or without fee is hereby granted, provided that the above
|
||||
* copyright notice and this permission notice appear in all copies.
|
||||
*
|
||||
* THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
|
||||
* WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
|
||||
* MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
|
||||
* ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
|
||||
* WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
|
||||
* ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
|
||||
* OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
|
||||
*
|
||||
*/
|
||||
|
||||
#include <linux/platform_device.h>
|
||||
#include <linux/mtd/mtd.h>
|
||||
#include <linux/mtd/partitions.h>
|
||||
#include <linux/platform/ar934x_nfc.h>
|
||||
|
||||
#include <asm/mach-ath79/ar71xx_regs.h>
|
||||
#include <asm/fw/fw.h>
|
||||
|
||||
#include "common.h"
|
||||
#include "pci.h"
|
||||
#include "dev-ap9x-pci.h"
|
||||
#include "dev-gpio-buttons.h"
|
||||
#include "dev-eth.h"
|
||||
#include "dev-leds-gpio.h"
|
||||
#include "dev-m25p80.h"
|
||||
#include "dev-nfc.h"
|
||||
#include "dev-usb.h"
|
||||
#include "dev-wmac.h"
|
||||
#include "machtypes.h"
|
||||
|
||||
#define AC200I_GPIO_BTN_RESET 17
|
||||
|
||||
#define AC200I_KEYS_POLL_INTERVAL 20 /* msecs */
|
||||
#define AC200I_KEYS_DEBOUNCE_INTERVAL (3 * AC200I_KEYS_POLL_INTERVAL)
|
||||
|
||||
#define AC200I_MAC_ADDR 0x1f040249
|
||||
#define AC200I_MAC1_OFFSET 6
|
||||
#define AC200I_WMAC_CALDATA_ADDR 0x1f061000
|
||||
|
||||
static struct gpio_led ac200i_leds_gpio[] __initdata = {
|
||||
{
|
||||
.name = "nokia:red:wlan-2g",
|
||||
.gpio = 0,
|
||||
.active_low = 1,
|
||||
},
|
||||
{
|
||||
.name = "nokia:green:power",
|
||||
.gpio = 1,
|
||||
.active_low = 1,
|
||||
},
|
||||
{
|
||||
.name = "nokia:green:wlan-2g",
|
||||
.gpio = 2,
|
||||
.active_low = 1,
|
||||
},
|
||||
{
|
||||
.name = "nokia:green:ctrl",
|
||||
.gpio = 3,
|
||||
.active_low = 1,
|
||||
},
|
||||
{
|
||||
.name = "nokia:green:eth",
|
||||
.gpio = 4,
|
||||
.active_low = 1,
|
||||
},
|
||||
{
|
||||
.name = "nokia:red:power",
|
||||
.gpio = 13,
|
||||
.active_low = 1,
|
||||
},
|
||||
{
|
||||
.name = "nokia:red:eth",
|
||||
.gpio = 14,
|
||||
.active_low = 1,
|
||||
},
|
||||
{
|
||||
.name = "nokia:red:wlan-5g",
|
||||
.gpio = 18,
|
||||
.active_low = 1,
|
||||
},
|
||||
{
|
||||
.name = "nokia:green:wlan-5g",
|
||||
.gpio = 19,
|
||||
.active_low = 1,
|
||||
},
|
||||
{
|
||||
.name = "nokia:red:ctrl",
|
||||
.gpio = 20,
|
||||
.active_low = 1,
|
||||
},
|
||||
};
|
||||
|
||||
static struct gpio_keys_button ac200i_gpio_keys[] __initdata = {
|
||||
{
|
||||
.desc = "Reset button",
|
||||
.type = EV_KEY,
|
||||
.code = KEY_RESTART,
|
||||
.debounce_interval = AC200I_KEYS_DEBOUNCE_INTERVAL,
|
||||
.gpio = AC200I_GPIO_BTN_RESET,
|
||||
.active_low = 1,
|
||||
},
|
||||
};
|
||||
|
||||
static struct mtd_partition ac200i_nand_partitions[] = {
|
||||
{
|
||||
.name = "cfg",
|
||||
.offset = 0x0100000,
|
||||
.size = 0x1800000,
|
||||
.mask_flags = MTD_WRITEABLE,
|
||||
},
|
||||
{
|
||||
.name = "kernel",
|
||||
.offset = 0x2000000,
|
||||
.size = 0x0400000,
|
||||
},
|
||||
{
|
||||
.name = "ubi",
|
||||
.offset = 0x2400000,
|
||||
.size = 0x2000000,
|
||||
},
|
||||
{
|
||||
.name = "kernel",
|
||||
.offset = 0x5000000,
|
||||
.size = 0x0400000,
|
||||
},
|
||||
{
|
||||
.name = "ubi",
|
||||
.offset = 0x5400000,
|
||||
.size = 0x2000000,
|
||||
},
|
||||
};
|
||||
|
||||
static const char *boot_getenv(const char *key)
|
||||
{
|
||||
const char *start = (const char *) KSEG1ADDR(0x1f070000);
|
||||
const char *end = start + 0x20000;
|
||||
const char *addr;
|
||||
|
||||
for (addr = start + 4;
|
||||
*addr && *addr != 0xff && addr < end &&
|
||||
strnlen(addr, end - addr) < end - addr;
|
||||
addr += strnlen(addr, end - addr) + 1) {
|
||||
const char *val;
|
||||
|
||||
val = strchr(addr, '=');
|
||||
if (!val)
|
||||
continue;
|
||||
|
||||
if (strncmp(addr, key, val - addr))
|
||||
continue;
|
||||
|
||||
return val + 1;
|
||||
}
|
||||
return NULL;
|
||||
}
|
||||
|
||||
static void __init ac200i_setup(void)
|
||||
{
|
||||
const char *img;
|
||||
u8 *wmac = (u8 *) KSEG1ADDR(AC200I_WMAC_CALDATA_ADDR);
|
||||
u8 *mac_addr = (u8 *) KSEG1ADDR(AC200I_MAC_ADDR);
|
||||
|
||||
ath79_register_m25p80(NULL);
|
||||
|
||||
ath79_register_leds_gpio(-1, ARRAY_SIZE(ac200i_leds_gpio),
|
||||
ac200i_leds_gpio);
|
||||
ath79_register_gpio_keys_polled(-1, AC200I_KEYS_POLL_INTERVAL,
|
||||
ARRAY_SIZE(ac200i_gpio_keys),
|
||||
ac200i_gpio_keys);
|
||||
|
||||
ath79_register_usb();
|
||||
ath79_nfc_set_parts(ac200i_nand_partitions,
|
||||
ARRAY_SIZE(ac200i_nand_partitions));
|
||||
ath79_nfc_set_ecc_mode(AR934X_NFC_ECC_HW);
|
||||
ath79_register_nfc();
|
||||
|
||||
ath79_register_wmac(wmac, NULL);
|
||||
|
||||
ath79_register_mdio(0, 0x0);
|
||||
ath79_init_mac(ath79_eth0_data.mac_addr, mac_addr, 0);
|
||||
|
||||
/* GMAC0 is connected to the SGMII interface */
|
||||
ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_SGMII;
|
||||
ath79_eth0_data.phy_mask = BIT(4);
|
||||
ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev;
|
||||
ath79_eth0_pll_data.pll_1000 = 0x03000101;
|
||||
ath79_eth0_pll_data.pll_100 = 0x80000101;
|
||||
ath79_eth0_pll_data.pll_10 = 0x80001313;
|
||||
|
||||
img = boot_getenv("dualPartition");
|
||||
if (img && !strcmp(img, "imgA")) {
|
||||
ac200i_nand_partitions[3].name = "kernel_alt";
|
||||
ac200i_nand_partitions[4].name = "ubi_alt";
|
||||
} else {
|
||||
ac200i_nand_partitions[1].name = "kernel_alt";
|
||||
ac200i_nand_partitions[2].name = "ubi_alt";
|
||||
}
|
||||
|
||||
ath79_register_eth(0);
|
||||
|
||||
ath79_register_pci();
|
||||
}
|
||||
|
||||
MIPS_MACHINE(ATH79_MACH_WI2A_AC200I, "WI2A-AC200i",
|
||||
"Nokia WI2A-AC200i",
|
||||
ac200i_setup);
|
||||
|
|
@ -19,6 +19,7 @@ enum ath79_mach_type {
|
|||
ATH79_MACH_GENERIC = 0,
|
||||
ATH79_MACH_A40, /* OpenMesh A40 */
|
||||
ATH79_MACH_A60, /* OpenMesh A60 */
|
||||
ATH79_MACH_WI2A_AC200I, /* Nokia WI2A-AC200i */
|
||||
ATH79_MACH_ALFA_AP120C, /* ALFA Network AP120C board */
|
||||
ATH79_MACH_ALFA_AP96, /* ALFA Network AP96 board */
|
||||
ATH79_MACH_ALFA_NX, /* ALFA Network N2/N5 board */
|
||||
|
|
|
|||
|
|
@ -84,6 +84,21 @@ define Device/rambutan
|
|||
endef
|
||||
TARGET_DEVICES += rambutan
|
||||
|
||||
define Device/wi2a-ac200i
|
||||
SUPPORTED_DEVICES = $(1)
|
||||
DEVICE_TITLE := Nokia WI2A-AC200i
|
||||
DEVICE_PACKAGES := kmod-usb-core kmod-usb2 kmod-ath9k kmod-ath10k ath10k-firmware-qca988x
|
||||
BOARDNAME := WI2A-AC200i
|
||||
BLOCKSIZE := 64k
|
||||
KERNEL_SIZE := 3648k
|
||||
IMAGE_SIZE := 32m
|
||||
IMAGES := sysupgrade.tar
|
||||
MTDPARTS := spi0.0:256k(u-boot)ro,64k(envFacA)ro,64k(envFacB)ro,64k(ART)ro,128k(u-boot-env)
|
||||
KERNEL := kernel-bin | patch-cmdline | lzma | uImage lzma
|
||||
IMAGE/sysupgrade.tar := sysupgrade-tar | append-metadata
|
||||
endef
|
||||
TARGET_DEVICES += wi2a-ac200i
|
||||
|
||||
define Device/z1
|
||||
DEVICE_TITLE := Meraki Z1
|
||||
DEVICE_PACKAGES := kmod-usb-core kmod-usb2 kmod-usb-ledtrig-usbport kmod-spi-gpio kmod-ath9k kmod-owl-loader
|
||||
|
|
|
|||
|
|
@ -180,6 +180,7 @@ CONFIG_ATH79_MACH_RAMBUTAN=y
|
|||
# CONFIG_ATH79_MACH_UBNT_XM is not set
|
||||
# CONFIG_ATH79_MACH_WEIO is not set
|
||||
# CONFIG_ATH79_MACH_WHR_HP_G300N is not set
|
||||
CONFIG_ATH79_MACH_WI2A_AC200I=y
|
||||
# CONFIG_ATH79_MACH_WLAE_AG300N is not set
|
||||
# CONFIG_ATH79_MACH_WLR8100 is not set
|
||||
# CONFIG_ATH79_MACH_WNDAP360 is not set
|
||||
|
|
|
|||
Loading…
Reference in New Issue