continue massive kernel menuconfig reorganization

SVN-Revision: 2298

openwrt/target/linux/Config.in

@@ -79,98 +79,49 @@ config BR2_PACKAGE_KMOD_BRCM_ET
 	help
 	  Proprietary driver for Broadcom Ethernet chipsets
 
-config BR2_PACKAGE_KMOD_ARPT
+comment "Networking modules ------------"
-	tristate "ARP firewalling support"
+
+config BR2_PACKAGE_KMOD_ATM
+	tristate "kmod-atm....................... ATM support"
+	default y if BR2_LINUX_2_4_AR7
+	help
+	  ATM support
+
+config BR2_PACKAGE_KMOD_GRE
+	tristate "kmod-gre....................... GRE tunneling driver"
 	default m
 	help
-	  Kernel modules for ARP firewalling
+	  Kernel support for GRE tunnels
-
-config BR2_PACKAGE_KMOD_EBT
-	tristate "Ethernet Bridge firewalling support"
-	default m
-	help
-	  Kernel modules for bridge firewalling
-
-config BR2_PACKAGE_KMOD_IPTABLES_V4
-	tristate "Basic set of kernel modules for iptables"
-	default y
-	help
-	  Kernel modules for IPv4 firewalling
-
-config BR2_PACKAGE_KMOD_IPTABLES_V4_EXTRA
-	tristate "Extra modules for iptables"
-	default m
-	help
-	  Extra kernel modules for IPv4 firewalling
 
 config BR2_PACKAGE_KMOD_IPV6
-	tristate "IPv6 support"
+	tristate "kmod-ipv6...................... IPv6 support"
 	default m
 	help
 	  Kernel modules for IPv6 protocol support
 	  
-config BR2_PACKAGE_KMOD_IPTABLES_V6
-	tristate "Kernel modules for ip6tables"
-	default m
-	depends BR2_PACKAGE_KMOD_IPV6
-	help
-	  IPv6 firewalling support
-
-config BR2_PACKAGE_KMOD_IDE
-	tristate "IDE support"
-	default m
-	help
-	  Kernel modules for IDE support
-	  useful for usb mass storage devices (e.g. on WL-HDD)
-
-config BR2_PACKAGE_KMOD_LOOP
-	tristate "loop mount support"
-	default m
-	help
-	  Kernel module for loop mount support
-
-config BR2_PACKAGE_KMOD_NBD
-	tristate "network block device"
-	default m
-	help
-	  Kernel module for network block device
-
-config BR2_PACKAGE_KMOD_LP
-	tristate "parallel port and lp support"
-	default m
-	help
-	  Kernel modules for line printer and parallel port support
-
-config BR2_PACKAGE_KMOD_CRYPTO
-	tristate "CryptoAPI modules"
-	default m
-	select BUSYBOX_CONFIG_FEATURE_CHECK_TAINTED_MODULE
-	help
-	  Kernel modules for cryptographic algorithms
-
 config BR2_PACKAGE_KMOD_PPP
-	tristate "PPP support"
+	tristate "kmod-ppp....................... PPP support"
 	default m
 	help
 	  Kernel support for PPP
 
 config BR2_PACKAGE_KMOD_MPPE
-	tristate "PPP MPPE/MPPC module"
+	tristate   "kmod-mppe.................... PPP MPPE/MPPC module"
 	default m
-	select BR2_PACKAGE_KMOD_CRYPTO
 	depends BR2_PACKAGE_KMOD_PPP
+	select BR2_PACKAGE_KMOD_CRYPTO
 	help
 	  Support for Microsoft PPP Encryption/Compression
 
 config BR2_PACKAGE_KMOD_PPPOE
-	tristate "PPPoE modules"
+	tristate   "kmod-pppoe................... PPPoE (PPP over Ethernet) kernel support"
 	default m
 	depends BR2_PACKAGE_KMOD_PPP
 	help
 	  Support for PPP over Ethernet
 
 config BR2_PACKAGE_KMOD_PPPOATM
-	tristate "PPP over ATM"
+	tristate   "kmod-pppoatm................. PPPoA (PPP over ATM) kernel support"
 	default y if BR2_LINUX_2_4_AR7
 	default m
 	depends BR2_PACKAGE_KMOD_PPP
@@ -178,29 +129,85 @@ config BR2_PACKAGE_KMOD_PPPOATM
 	help
 	  Support for PPP over ATM
 
-config BR2_PACKAGE_KMOD_ATM
+config BR2_PACKAGE_KMOD_SCHED
-	tristate "ATM support"
+	tristate "kmod-sched..................... Traffic schedulers"
-	default y if BR2_LINUX_2_4_AR7
+	default m
 	help
-	  ATM support
+	  Kernel schedulers for IP traffic
 
 config BR2_PACKAGE_KMOD_TUN
-	tristate "Universal TUN/TAP driver"
+	tristate "kmod-tun....................... Universal TUN/TAP driver"
 	default m
 	help
 	  Kernel support for the TUN/TAP tunneling device
 
-config BR2_PACKAGE_KMOD_GRE
-	tristate "GRE tunneling driver"
-	default m
-	help
-	  Kernel support for GRE tunnels
 
-config BR2_PACKAGE_KMOD_SCHED
+comment "Filtering/Firewalling ---------"
-	tristate "Traffic schedulers"
+
+config BR2_PACKAGE_KMOD_ARPTABLES
+	tristate "kmod-arptables................. ARP firewalling support"
 	default m
 	help
-	  Kernel schedulers for IP traffic
+	  Kernel modules for ARP firewalling
+
+config BR2_PACKAGE_KMOD_EBTABLES
+	tristate "kmod-ebtables.................. Ethernet Bridge firewalling support"
+	default m
+	help
+	  Kernel modules for bridge firewalling
+
+config BR2_PACKAGE_KMOD_IPTABLES_V4
+	tristate "kmod-iptables.................. Basic set of kernel modules for iptables"
+	default y
+	help
+	  Kernel modules for IPv4 firewalling
+
+config BR2_PACKAGE_KMOD_IPTABLES_V4_EXTRA
+	tristate "kmod-iptables-extra............ Extra modules for iptables"
+	default m
+	help
+	  Extra kernel modules for IPv4 firewalling
+
+config BR2_PACKAGE_KMOD_IPTABLES_V6
+	tristate "kmod-ip6tables................. Kernel modules for ip6tables"
+	default m
+	depends BR2_PACKAGE_KMOD_IPV6
+	help
+	  IPv6 firewalling support
+
+comment "Block devices support ---------"
+
+config BR2_PACKAGE_KMOD_IDE
+	tristate "kmod-ide....................... IDE support"
+	default m
+	help
+	  Kernel modules for IDE support
+	  useful for usb mass storage devices (e.g. on WL-HDD)
+	  
+
+config BR2_PACKAGE_KMOD_LOOP
+	tristate "kmod-loop...................... loop mount support"
+	default m
+	help
+	  Kernel module for loop mount support
+	  
+
+config BR2_PACKAGE_KMOD_NBD
+	tristate "kmod-nbd....................... network block device"
+	default m
+	help
+	  Kernel module for network block device
+	  
+
+comment "Cryptographic support ---------"
+
+config BR2_PACKAGE_KMOD_CRYPTO
+	tristate "kmod-crypto.................... CryptoAPI modules"
+	default m
+	select BUSYBOX_CONFIG_FEATURE_CHECK_TAINTED_MODULE
+	help
+	  Kernel modules for cryptographic algorithms
+	  
 
 comment "Filesystems support -----------"
 
@@ -210,24 +217,28 @@ config BR2_PACKAGE_KMOD_CIFS
 	help
 	  Kernel modules for CIFS support
 	  
+
 config BR2_PACKAGE_KMOD_FS_EXT2
 	tristate "kmod-fs-ext2................... EXT2 filesystem support"
 	default m
 	help
 	  Kernel modules for EXT2 filesystem support
 	  
+
 config BR2_PACKAGE_KMOD_FS_EXT3
 	tristate "kmod-fs-ext3................... EXT3 filesystem support"
 	default m
 	help
 	  Kernel modules for EXT3 filesystem support
 	  
+
 config BR2_PACKAGE_KMOD_FS_HFSPLUS
 	tristate "kmod-fs-hfsplus................ HFS+ filesystem support"
 	default m
 	help
 	  Kernel modules for HFS+ filesystem support
 	  
+
 config BR2_PACKAGE_KMOD_FS_NFS
 	tristate "kmod-fs-nfs.................... NFS support"
 	default m
@@ -552,6 +563,13 @@ config BR2_PACKAGE_KMOD_BLUETOOTH
 	  Bluetooth drivers and network stack
 	  
 
+config BR2_PACKAGE_KMOD_LP
+	tristate "kmod-lp........................ Parallel port and lp support"
+	default m
+	help
+	  Kernel modules for line printer and parallel port support
+	  
+
 config BR2_PACKAGE_KMOD_WD1100
 	tristate "kmod-wd1100.................... Soekris net4801 watchdog"
 	default y

openwrt/target/linux/linux-2.4/Makefile

@@ -50,66 +50,96 @@ ifeq ($(BOARD),ar7)
 include ./ar7.mk
 endif
 
+
+# Networking
+
 $(eval $(call KMOD_template,ATM,atm,\
 	$(MODULES_DIR)/kernel/net/atm/atm.o \
 	$(MODULES_DIR)/kernel/net/atm/br2684.o \
 ,CONFIG_ATM,,50,atm))
-$(eval $(call KMOD_template,PPPOATM,pppoatm,\
+
-	$(MODULES_DIR)/kernel/net/atm/pppoatm.o \
+$(eval $(call KMOD_template,GRE,gre,\
-,CONFIG_PPPOATM))
+	$(MODULES_DIR)/kernel/net/ipv4/ip_gre.o \
-$(eval $(call KMOD_template,ARPT,arptables,\
+,CONFIG_NET_IPGRE))
-	$(MODULES_DIR)/kernel/net/ipv4/netfilter/arp*.o \
+
-,CONFIG_IP_NF_ARPTABLES))
-$(eval $(call KMOD_template,EBT,ebtables,\
-	$(MODULES_DIR)/kernel/net/bridge/netfilter/*.o \
-,CONFIG_BRIDGE_NF_EBTABLES))
-$(eval $(call KMOD_template,IPTABLES_V4_EXTRA,iptables-extra,\
-	$(MODULES_DIR)/kernel/net/ipv4/netfilter/ip*.o \
-))
-$(eval $(call KMOD_template,IPTABLES_V6,ip6tables,\
-	$(MODULES_DIR)/kernel/net/ipv6/netfilter/ip*.o \
-,CONFIG_IP6_NF_IPTABLES,kmod-ipv6))
 $(eval $(call KMOD_template,IPV6,ipv6,\
 	$(MODULES_DIR)/kernel/net/ipv6/ipv6.o \
 ,CONFIG_IPV6,,20,ipv6))
+
+$(eval $(call KMOD_template,PPP,ppp,\
+	$(MODULES_DIR)/kernel/drivers/net/ppp_async.o \
+	$(MODULES_DIR)/kernel/drivers/net/ppp_generic.o \
+	$(MODULES_DIR)/kernel/drivers/net/slhc.o \
+	$(MODULES_DIR)/kernel/drivers/net/pppox.o \
+,CONFIG_PPP))
+
+$(eval $(call KMOD_template,MPPE,mppe,\
+	$(MODULES_DIR)/kernel/drivers/net/ppp_mppe_mppc.o \
+,CONFIG_PPP_MPPE_MPPC))
+
+$(eval $(call KMOD_template,PPPOATM,pppoatm,\
+	$(MODULES_DIR)/kernel/net/atm/pppoatm.o \
+,CONFIG_PPPOATM))
+
+$(eval $(call KMOD_template,PPPOE,pppoe,\
+	$(MODULES_DIR)/kernel/drivers/net/pppoe.o \
+,CONFIG_PPPOE))
+
+ifneq ($(wildcard $(MODULES_DIR)/kernel/net/sched/*.o),)
+CONFIG_SCHED:=m
+endif
+$(eval $(call KMOD_template,SCHED,sched,\
+	$(MODULES_DIR)/kernel/net/sched/*.o \
+,CONFIG_SCHED))
+
+$(eval $(call KMOD_template,TUN,tun,\
+	$(MODULES_DIR)/kernel/drivers/net/tun.o \
+,CONFIG_TUN,,20,tun))
+
+
+# Filtering / Firewalling
+
+$(eval $(call KMOD_template,ARPTABLES,arptables,\
+	$(MODULES_DIR)/kernel/net/ipv4/netfilter/arp*.o \
+,CONFIG_IP_NF_ARPTABLES))
+
+$(eval $(call KMOD_template,EBTABLES,ebtables,\
+	$(MODULES_DIR)/kernel/net/bridge/netfilter/*.o \
+,CONFIG_BRIDGE_NF_EBTABLES))
+
+$(eval $(call KMOD_template,IPTABLES_V4_EXTRA,iptables-extra,\
+	$(MODULES_DIR)/kernel/net/ipv4/netfilter/ip*.o \
+))
+
+$(eval $(call KMOD_template,IPTABLES_V6,ip6tables,\
+	$(MODULES_DIR)/kernel/net/ipv6/netfilter/ip*.o \
+,CONFIG_IP6_NF_IPTABLES,kmod-ipv6))
+
+
+# Block devices
+
 $(eval $(call KMOD_template,IDE,ide,\
 	$(MODULES_DIR)/kernel/drivers/ide/*.o \
 	$(MODULES_DIR)/kernel/drivers/ide/*/*.o \
 ,CONFIG_IDE))
+
 $(eval $(call KMOD_template,LOOP,loop,\
     $(MODULES_DIR)/kernel/drivers/block/loop.o \
 ,CONFIG_BLK_DEV_LOOP,,20,loop))
 
+$(eval $(call KMOD_template,NBD,nbd,\
+    $(MODULES_DIR)/kernel/drivers/block/nbd.o \
+,CONFIG_BLK_DEV_NBD,,20,nbd))
+
+
+# Crypto
+
 ifneq ($(wildcard $(MODULES_DIR)/kernel/crypto/*.o),)
 CONFIG_CRYPTO:=m
 endif
 $(eval $(call KMOD_template,CRYPTO,crypto,\
 	$(MODULES_DIR)/kernel/crypto/*.o \
 ,CONFIG_CRYPTO))
-$(eval $(call KMOD_template,PPP,ppp,\
-	$(MODULES_DIR)/kernel/drivers/net/ppp_async.o \
-	$(MODULES_DIR)/kernel/drivers/net/ppp_generic.o \
-	$(MODULES_DIR)/kernel/drivers/net/slhc.o \
-	$(MODULES_DIR)/kernel/drivers/net/pppox.o \
-,CONFIG_PPP))
-$(eval $(call KMOD_template,MPPE,mppe,\
-	$(MODULES_DIR)/kernel/drivers/net/ppp_mppe_mppc.o \
-,CONFIG_PPP_MPPE_MPPC))
-$(eval $(call KMOD_template,PPPOE,pppoe,\
-	$(MODULES_DIR)/kernel/drivers/net/pppoe.o \
-,CONFIG_PPPOE))
-$(eval $(call KMOD_template,TUN,tun,\
-	$(MODULES_DIR)/kernel/drivers/net/tun.o \
-,CONFIG_TUN,,20,tun))
-$(eval $(call KMOD_template,GRE,gre,\
-	$(MODULES_DIR)/kernel/net/ipv4/ip_gre.o \
-,CONFIG_NET_IPGRE))
-ifneq ($(wildcard $(MODULES_DIR)/kernel/net/sched/*.o),)
-CONFIG_SCHED:=m
-endif
-$(eval $(call KMOD_template,SCHED,sched,\
-	$(MODULES_DIR)/kernel/net/sched/*.o \
-,CONFIG_SCHED))
 
 
 # Filesystems