etrax: 2.6.32 support

SVN-Revision: 19543

target/linux/etrax/Makefile

@@ -10,7 +10,7 @@ ARCH:=cris
 BOARD:=etrax
 BOARDNAME:=Foxboard (ETRAX 100LX)
 FEATURES:=squashfs jffs2
-LINUX_VERSION:=2.6.30.10
+LINUX_VERSION:=2.6.32.7
 DEVICE_TYPE=
 
 include $(INCLUDE_DIR)/target.mk

target/linux/etrax/config-default

@@ -1,15 +1,17 @@
 # CONFIG_ARCH_HAS_ILOG2_U32 is not set
 # CONFIG_ARCH_HAS_ILOG2_U64 is not set
-# CONFIG_BINARY_PRINTF is not set
 CONFIG_BITREVERSE=y
 # CONFIG_BLK_DEV_INITRD is not set
 CONFIG_BOUNCE=y
 # CONFIG_BRIDGE is not set
 CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-# CONFIG_CRIS_MACH_ARTPEC3 is not set
+CONFIG_CFG80211_DEFAULT_PS_VALUE=0
 CONFIG_CRIS=y
+# CONFIG_CRIS_MACH_ARTPEC3 is not set
+CONFIG_DECOMPRESS_LZMA=y
 # CONFIG_ETRAX100LX is not set
 CONFIG_ETRAX100LX_V2=y
+# CONFIG_ETRAXFS is not set
 CONFIG_ETRAX_ARCH_V10=y
 # CONFIG_ETRAX_ARCH_V32 is not set
 CONFIG_ETRAX_AXISFLASHMAP=y
@@ -35,10 +37,9 @@ CONFIG_ETRAX_ETHERNET=y
 CONFIG_ETRAX_FAST_TIMER=y
 CONFIG_ETRAX_FLASH1_SIZE=0
 CONFIG_ETRAX_FLASH_BUSWIDTH=2
-# CONFIG_ETRAXFS is not set
 CONFIG_ETRAX_GPIO=y
-# CONFIG_ETRAX_I2C_GVC is not set
 # CONFIG_ETRAX_I2C is not set
+# CONFIG_ETRAX_I2C_GVC is not set
 # CONFIG_ETRAX_KMALLOCED_MODULES is not set
 CONFIG_ETRAX_LED1G=2
 CONFIG_ETRAX_LED1R=2
@@ -100,23 +101,25 @@ CONFIG_ETRAX_SER3_DTR_RI_DSR_CD_ON_NONE=y
 # CONFIG_ETRAX_SER3_DTR_RI_DSR_CD_ON_PB is not set
 CONFIG_ETRAX_SER3_RI_ON_PA_BIT=-1
 CONFIG_ETRAX_SER3_RI_ON_PB_BIT=-1
+CONFIG_ETRAX_SERIAL=y
 # CONFIG_ETRAX_SERIAL_FAST_TIMER is not set
 # CONFIG_ETRAX_SERIAL_FLUSH_DMA_FAST is not set
+CONFIG_ETRAX_SERIAL_PORT0=y
 # CONFIG_ETRAX_SERIAL_PORT0_DMA0_OUT is not set
 # CONFIG_ETRAX_SERIAL_PORT0_DMA1_IN is not set
 # CONFIG_ETRAX_SERIAL_PORT0_DMA6_OUT is not set
 # CONFIG_ETRAX_SERIAL_PORT0_DMA7_IN is not set
 CONFIG_ETRAX_SERIAL_PORT0_NO_DMA_IN=y
 CONFIG_ETRAX_SERIAL_PORT0_NO_DMA_OUT=y
-CONFIG_ETRAX_SERIAL_PORT0=y
 # CONFIG_ETRAX_SERIAL_PORT1 is not set
+CONFIG_ETRAX_SERIAL_PORT2=y
 CONFIG_ETRAX_SERIAL_PORT2_DMA2_OUT=y
 CONFIG_ETRAX_SERIAL_PORT2_DMA3_IN=y
 # CONFIG_ETRAX_SERIAL_PORT2_DMA6_OUT is not set
 # CONFIG_ETRAX_SERIAL_PORT2_DMA7_IN is not set
 # CONFIG_ETRAX_SERIAL_PORT2_NO_DMA_IN is not set
 # CONFIG_ETRAX_SERIAL_PORT2_NO_DMA_OUT is not set
-CONFIG_ETRAX_SERIAL_PORT2=y
+CONFIG_ETRAX_SERIAL_PORT3=y
 # CONFIG_ETRAX_SERIAL_PORT3_DMA2_OUT is not set
 # CONFIG_ETRAX_SERIAL_PORT3_DMA3_IN is not set
 CONFIG_ETRAX_SERIAL_PORT3_DMA4_OUT=y
@@ -125,15 +128,14 @@ CONFIG_ETRAX_SERIAL_PORT3_DMA5_IN=y
 # CONFIG_ETRAX_SERIAL_PORT3_DMA9_IN is not set
 # CONFIG_ETRAX_SERIAL_PORT3_NO_DMA_IN is not set
 # CONFIG_ETRAX_SERIAL_PORT3_NO_DMA_OUT is not set
-CONFIG_ETRAX_SERIAL_PORT3=y
 CONFIG_ETRAX_SERIAL_RX_TIMEOUT_TICKS=5
-CONFIG_ETRAX_SERIAL=y
 # CONFIG_ETRAX_SOFT_SHUTDOWN is not set
 # CONFIG_ETRAX_SYNCHRONOUS_SERIAL is not set
 # CONFIG_ETRAX_USB_HOST is not set
 # CONFIG_ETRAX_VCS_SIM is not set
 # CONFIG_ETRAX_WATCHDOG is not set
 CONFIG_FORCE_MAX_ZONEORDER=6
+# CONFIG_FSNOTIFY is not set
 CONFIG_GENERIC_FIND_LAST_BIT=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 CONFIG_GENERIC_IOMAP=y
@@ -143,25 +145,24 @@ CONFIG_HAS_DMA=y
 CONFIG_HAS_IOMEM=y
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_HAVE_IDE=y
-CONFIG_HAVE_MLOCK=y
 # CONFIG_HW_RANDOM is not set
-# CONFIG_MTD_CFI_INTELEXT is not set
-CONFIG_MTD_CONCAT=y
-CONFIG_MTD_MTDRAM=y
 CONFIG_MTDRAM_ABS_POS=0
 CONFIG_MTDRAM_ERASE_SIZE=128
 CONFIG_MTDRAM_TOTAL_SIZE=0
+# CONFIG_MTD_CFI_INTELEXT is not set
+CONFIG_MTD_CONCAT=y
+CONFIG_MTD_MTDRAM=y
 # CONFIG_NETDEV_1000 is not set
 CONFIG_NO_IOPORT=y
 # CONFIG_OOM_REBOOT is not set
 CONFIG_PAGEFLAGS_EXTENDED=y
-# CONFIG_PCI is not set
 # CONFIG_RTC is not set
 # CONFIG_SCSI_DMA is not set
 # CONFIG_SERIAL_8250 is not set
-# CONFIG_SLOW_WORK is not set
 # CONFIG_SVINTO_SIM is not set
 # CONFIG_SYSTEM_PROFILER is not set
+# CONFIG_TREE_PREEMPT_RCU is not set
+CONFIG_TREE_RCU=y
 CONFIG_UID16=y
 # CONFIG_USB_ARCH_HAS_EHCI is not set
 # CONFIG_USB_ARCH_HAS_HCD is not set

target/linux/etrax/patches-2.6.32/500-i2c_gvc.patch

@@ -1,8 +1,6 @@
-Index: linux-2.6.30.8/arch/cris/arch-v10/drivers/Kconfig
-===================================================================
---- linux-2.6.30.8.orig/arch/cris/arch-v10/drivers/Kconfig	2009-10-02 11:31:49.000000000 +0200
-+++ linux-2.6.30.8/arch/cris/arch-v10/drivers/Kconfig	2009-10-06 10:36:23.000000000 +0200
-@@ -450,11 +450,31 @@
+--- a/arch/cris/arch-v10/drivers/Kconfig
++++ b/arch/cris/arch-v10/drivers/Kconfig
+@@ -450,11 +450,31 @@ config ETRAX_I2C
  	  i2c_arg = I2C_READARG(STA013_READ_ADDR, reg);
  	  val = ioctl(fd, _IO(ETRAXI2C_IOCTYPE, I2C_READREG), i2c_arg);
  
@@ -35,7 +33,7 @@ Index: linux-2.6.30.8/arch/cris/arch-v10/drivers/Kconfig
  	help
  	  Select whether to use the special I2C mode in the PB I/O register or
  	  not.  This option needs to be selected in order to use some drivers
-@@ -478,7 +498,7 @@
+@@ -478,7 +498,7 @@ config ETRAX_I2C_CLK_PORT
  
  config ETRAX_I2C_EEPROM
  	bool "I2C EEPROM (non-volatile RAM) support"
@@ -44,10 +42,8 @@ Index: linux-2.6.30.8/arch/cris/arch-v10/drivers/Kconfig
  	help
  	  Enables I2C EEPROM (non-volatile RAM) on PB0 and PB1 using the I2C
  	  driver.  Select size option: Probed, 2k, 8k, 16k.
-Index: linux-2.6.30.8/arch/cris/arch-v10/drivers/Makefile
-===================================================================
---- linux-2.6.30.8.orig/arch/cris/arch-v10/drivers/Makefile	2009-10-02 11:31:14.000000000 +0200
-+++ linux-2.6.30.8/arch/cris/arch-v10/drivers/Makefile	2009-10-02 11:31:50.000000000 +0200
+--- a/arch/cris/arch-v10/drivers/Makefile
++++ b/arch/cris/arch-v10/drivers/Makefile
 @@ -4,6 +4,7 @@
  
  obj-$(CONFIG_ETRAX_AXISFLASHMAP)	+= axisflashmap.o

target/linux/etrax/profiles/100-generic.mk

@@ -10,7 +10,7 @@ define Profile/default
 endef
 
 define Profile/default/Description
-	Normal Foxboard setup (no vhdl)
+	Normal Foxboard setup
 endef
 $(eval $(call Profile,default))