brcm63xx: Add support for ADB P.DG A4001N

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 41852

target/linux/brcm63xx/base-files/etc/uci-defaults/01_leds

@@ -11,6 +11,9 @@ case "$board_name" in
 	ucidef_set_led_netdev "lan" "LAN" "A4001N1:green:eth" "eth0"
 	ucidef_set_led_usbdev "usb" "USB" "A4001N1:green:3g" "1-1"
 	;;
+96328dg2x2)
+	ucidef_set_led_usbdev "usb" "USB" "A4001N:green:usb" "1-1"
+	;;
 'F@ST2704V2')
 	ucidef_set_led_usbdev "usb" "USB" "F@ST2704V2:green:usb" "1-1"
 	;;

target/linux/brcm63xx/base-files/etc/uci-defaults/02_network

@@ -82,6 +82,7 @@ HW6358GW_B)
 96328A-1441N1 |\
 963281TAN |\
 963281T_TEF |\
+96328dg2x2 |\
 96368M-1341N |\
 96368M-1541N |\
 96368MVNgr |\

target/linux/brcm63xx/base-files/etc/uci-defaults/09_fix_crc

@@ -18,6 +18,7 @@ case "$board_name" in
 	96328A-1441N1 |\
 	963281TAN |\
 	963281T_TEF |\
+	96328dg2x2 |\
 	96358-502V |\
 	96368M-1341N |\
 	96368M-1541N |\

target/linux/brcm63xx/base-files/lib/brcm63xx.sh

@@ -32,6 +32,11 @@ brcm63xx_detect() {
 		status_led="96328avng::power"
 		ifname=eth0
 		;;
+	96328dg2x2)
+		brcm63xx_has_reset_button="true"
+		status_led="A4001N:green:power"
+		ifname="eth0"
+		;;
 	96328A-1241N)
 		brcm63xx_has_reset_button="true"
 		status_led="AR-5381u:green:power"

target/linux/brcm63xx/image/Makefile

@@ -201,6 +201,8 @@ define Image/Build
 	$(call Image/Build/CFE,$(1),96368MVNgr,6368,96368MVNgr-generic)
 	$(call Image/Build/CFE,$(1),96368MVWG,6368,96368MVWG-generic)
 
+	# ADB P.DG A4001N
+	$(call Image/Build/CFE,$(1),96328dg2x2,6328,A4001N,,--pad 4)
 	# ADB P.DG A4001N1
 	$(call Image/Build/CFE,$(1),963281T_TEF,6328,A4001N1,,--pad 8)
 	# Asmax AR 1004g

target/linux/brcm63xx/patches-3.10/566-board_A4001N.patch

@@ -0,0 +1,99 @@
+--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
+@@ -552,6 +552,88 @@ static struct board_info __initdata boar
+ 	},
+ };
+ 
++static struct board_info __initdata board_A4001N = {
++	.name				= "96328dg2x2",
++	.expected_cpu_id		= 0x6328,
++
++	.has_uart0			= 1,
++	.has_pci			= 1,
++	.has_ohci0			= 1,
++	.has_ehci0			= 1,
++	.num_usbh_ports			= 1,
++	.has_enetsw			= 1,
++
++	.enetsw = {
++		.used_ports = {
++			[0] = {
++				.used	= 1,
++				.phy_id	= 1,
++				.name	= "Port 1",
++			},
++			[1] = {
++				.used	= 1,
++				.phy_id	= 2,
++				.name	= "Port 2",
++			},
++			[2] = {
++				.used	= 1,
++				.phy_id	= 3,
++				.name	= "Port 3",
++			},
++			[3] = {
++				.used	= 1,
++				.phy_id	= 4,
++				.name	= "Port 4",
++			},
++		},
++	},
++
++	.leds = {
++		{
++			.name		= "A4001N:green:power",
++			.gpio		= 8,
++			.default_trigger = "default-on",
++		},
++		{
++			.name		= "A4001N:red:power",
++			.gpio		= 4,
++		},
++		{
++			.name		= "A4001N:red:inet",
++			.gpio		= 1,
++		},
++		{
++			.name		= "A4001N:green:usb",
++			.gpio		= 10,
++			.active_low	= 1,
++		},
++		{
++			.name		= "A4001N:green:dsl",
++			.gpio		= 11,
++			.active_low	= 1,
++		},
++	},
++
++	.buttons = {
++		{
++			.desc		= "reset",
++			.gpio		= 23,
++			.active_low	= 1,
++			.type		= EV_KEY,
++			.code		= KEY_RESTART,
++			.debounce_interval = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
++		},
++		{
++			.desc		= "wps",
++			.gpio		= 24,
++			.active_low	= 1,
++			.type		= EV_KEY,
++			.code		= KEY_WPS_BUTTON,
++			.debounce_interval = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
++		},
++	},
++};
++
+ static struct board_info __initdata board_A4001N1 = {
+ 	.name					= "963281T_TEF",
+ 	.expected_cpu_id			= 0x6328,
+@@ -5166,6 +5248,7 @@ static const struct board_info __initcon
+ 	&board_AR5381u,
+ 	&board_AR5387un,
+ 	&board_963281TAN,
++	&board_A4001N,
+ 	&board_A4001N1,
+ 	&board_dsl_274xb_f1,
+ 	&board_FAST2704V2,

target/linux/brcm63xx/patches-3.14/566-board_A4001N.patch

@@ -0,0 +1,99 @@
+--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
++++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
+@@ -554,6 +554,88 @@ static struct board_info __initdata boar
+ 	},
+ };
+ 
++static struct board_info __initdata board_A4001N = {
++	.name				= "96328dg2x2",
++	.expected_cpu_id		= 0x6328,
++
++	.has_uart0			= 1,
++	.has_pci			= 1,
++	.has_ohci0			= 1,
++	.has_ehci0			= 1,
++	.num_usbh_ports			= 1,
++	.has_enetsw			= 1,
++
++	.enetsw = {
++		.used_ports = {
++			[0] = {
++				.used	= 1,
++				.phy_id	= 1,
++				.name	= "Port 1",
++			},
++			[1] = {
++				.used	= 1,
++				.phy_id	= 2,
++				.name	= "Port 2",
++			},
++			[2] = {
++				.used	= 1,
++				.phy_id	= 3,
++				.name	= "Port 3",
++			},
++			[3] = {
++				.used	= 1,
++				.phy_id	= 4,
++				.name	= "Port 4",
++			},
++		},
++	},
++
++	.leds = {
++		{
++			.name		= "A4001N:green:power",
++			.gpio		= 8,
++			.default_trigger = "default-on",
++		},
++		{
++			.name		= "A4001N:red:power",
++			.gpio		= 4,
++		},
++		{
++			.name		= "A4001N:red:inet",
++			.gpio		= 1,
++		},
++		{
++			.name		= "A4001N:green:usb",
++			.gpio		= 10,
++			.active_low	= 1,
++		},
++		{
++			.name		= "A4001N:green:dsl",
++			.gpio		= 11,
++			.active_low	= 1,
++		},
++	},
++
++	.buttons = {
++		{
++			.desc		= "reset",
++			.gpio		= 23,
++			.active_low	= 1,
++			.type		= EV_KEY,
++			.code		= KEY_RESTART,
++			.debounce_interval = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
++		},
++		{
++			.desc		= "wps",
++			.gpio		= 24,
++			.active_low	= 1,
++			.type		= EV_KEY,
++			.code		= KEY_WPS_BUTTON,
++			.debounce_interval = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
++		},
++	},
++};
++
+ static struct board_info __initdata board_A4001N1 = {
+ 	.name					= "963281T_TEF",
+ 	.expected_cpu_id			= 0x6328,
+@@ -5176,6 +5258,7 @@ static const struct board_info __initcon
+ 	&board_AR5381u,
+ 	&board_AR5387un,
+ 	&board_963281TAN,
++	&board_A4001N,
+ 	&board_A4001N1,
+ 	&board_dsl_274xb_f1,
+ 	&board_FAST2704V2,