broadcom-diag: remove broadcom-diag

broadcom-diag is not supported any more and was replaced by
configuration the GPIOs in the arch code

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 41047

package/kernel/broadcom-diag/Makefile

@@ -1,42 +0,0 @@
-#
-# Copyright (C) 2006-2010 OpenWrt.org
-#
-# This is free software, licensed under the GNU General Public License v2.
-# See /LICENSE for more information.
-#
-
-include $(TOPDIR)/rules.mk
-include $(INCLUDE_DIR)/kernel.mk
-
-PKG_NAME:=broadcom-diag
-PKG_RELEASE:=11
-
-include $(INCLUDE_DIR)/package.mk
-
-define KernelPackage/diag
-  SUBMENU:=Other modules
-  DEPENDS:=@TARGET_brcm47xx @!LINUX_3_14
-  TITLE:=Driver for router LEDs and Buttons
-  FILES:=$(PKG_BUILD_DIR)/diag.ko
-  AUTOLOAD:=$(call AutoLoad,05,diag,1)
-endef
-
-define KernelPackage/diag/description
- Kernel modules for Broadcom LED and Button driver
-endef
-
-define Build/Prepare
-	mkdir -p $(PKG_BUILD_DIR)
-	$(CP) ./src/* $(PKG_BUILD_DIR)/
-endef
-
-define Build/Compile
-	$(MAKE) -C "$(LINUX_DIR)" \
-		CROSS_COMPILE="$(TARGET_CROSS)" \
-		ARCH="$(LINUX_KARCH)" \
-		SUBDIRS="$(PKG_BUILD_DIR)" \
-		EXTRA_CFLAGS="$(BUILDFLAGS)" \
-		modules
-endef
-
-$(eval $(call KernelPackage,diag))

package/kernel/broadcom-diag/src/Makefile

@@ -1,17 +0,0 @@
-#
-# Makefile for diag driver
-#
-# Copyright (C) 2005 Felix Fietkau <nbd@openwrt.org>
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License
-# as published by the Free Software Foundation; either version
-# 2 of the License, or (at your option) any later version.
-#
-
-obj-m := diag.o
-
-ifeq ($(MAKING_MODULES),1)
-
--include $(TOPDIR)/Rules.make
-endif

package/kernel/broadcom-diag/src/diag.h

@@ -1,87 +0,0 @@
-/*
- * diag.h - GPIO interface driver for Broadcom boards
- *
- * Copyright (C) 2006 Mike Baker <mbm@openwrt.org>,
- *                    Felix Fietkau <nbd@openwrt.org>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.
- *
- */
-
-#include <linux/irq.h>
-#define MODULE_NAME "diag"
-
-#define MAX_GPIO 16
-#define FLASH_TIME HZ/6
-
-enum polarity_t {
-	REVERSE = 0,
-	NORMAL = 1,
-	INPUT = 2,
-};
-
-enum {
-	PROC_BUTTON,
-	PROC_LED,
-	PROC_MODEL,
-	PROC_GPIOMASK
-};
-
-struct prochandler_t {
-	int type;
-	void *ptr;
-};
-
-struct button_t {
-	struct prochandler_t proc;
-	char *name;
-	u32 gpio;
-	unsigned long seen;
-	u8 pressed;
-};
-
-struct led_t {
-	struct prochandler_t proc;
-	char *name;
-	u32 gpio;
-	u8 polarity;
-	u8 flash;
-	u8 state;
-};
-
-struct platform_t {
-	char *name;
-
-	struct button_t buttons[MAX_GPIO];
-	u32 button_mask;
-	u32 button_polarity;
-	void (*platform_init)(void);
-
-	struct led_t leds[MAX_GPIO];
-};
-
-struct event_t {
-	struct work_struct wq;
-	unsigned long seen;
-	char *name, *action;
-#if LINUX_VERSION_CODE > KERNEL_VERSION(2,6,0)
-	struct sk_buff *skb;
-#else
-	char *scratch;
-	char *argv[4];
-	char *envp[7];
-	u8 enr, anr;
-#endif
-};

package/kernel/broadcom-diag/src/gpio.h

@@ -1,22 +0,0 @@
-#ifndef __DIAG_GPIO_H
-#define __DIAG_GPIO_H
-
-#include <linux/interrupt.h>
-#include <linux/ssb/ssb_embedded.h>
-#include <linux/gpio.h>
-#include <bcm47xx.h>
-
-#define EXTIF_ADDR 0x1f000000
-#define EXTIF_UART (EXTIF_ADDR + 0x00800000)
-
-/* GPIO pins driving LEDs through a shift register */
-#define SHIFTREG_DATA		(1 << 6)
-#define SHIFTREG_CLK		(1 << 7)
-#define SHIFTREG_MAX_BITS	8
-
-#define GPIO_TYPE_NORMAL	(0x0 << 24)
-#define GPIO_TYPE_EXTIF 	(0x1 << 24)
-#define GPIO_TYPE_SHIFT		(0x2 << 24)
-#define GPIO_TYPE_MASK  	(0xf << 24)
-
-#endif /* __DIAG_GPIO_H */