mirror of https://github.com/hak5/openwrt-owl.git
Michael Büsch
parent
e54b810ace
commit
0eb37951ed
|
|
@ -351,6 +351,7 @@ CONFIG_MTD_ONENAND_OTP=y
|
|||
# CONFIG_MTD_ONENAND_VERIFY_WRITE is not set
|
||||
# CONFIG_MTD_ROOTFS_ROOT_DEV is not set
|
||||
# CONFIG_MTD_ROOTFS_SPLIT is not set
|
||||
CONFIG_MUSB_PIO_ONLY=y
|
||||
CONFIG_N810BM=y
|
||||
CONFIG_NAMESPACES=y
|
||||
CONFIG_NEED_DMA_MAP_STATE=y
|
||||
|
|
@ -359,6 +360,7 @@ CONFIG_NETFILTER_XTABLES=y
|
|||
# CONFIG_NET_NS is not set
|
||||
# CONFIG_NET_SCHED is not set
|
||||
CONFIG_NLS=y
|
||||
CONFIG_NOP_USB_XCEIV=y
|
||||
CONFIG_NO_HZ=y
|
||||
CONFIG_OABI_COMPAT=y
|
||||
# CONFIG_OMAP2_DSS is not set
|
||||
|
|
@ -471,7 +473,7 @@ CONFIG_TOUCHSCREEN_TSC2005=y
|
|||
CONFIG_TREE_RCU=y
|
||||
CONFIG_TUN=m
|
||||
CONFIG_UID16=y
|
||||
CONFIG_USB=m
|
||||
CONFIG_USB=y
|
||||
# CONFIG_USB_ARCH_HAS_EHCI is not set
|
||||
# CONFIG_USB_AUDIO is not set
|
||||
# CONFIG_USB_CDC_COMPOSITE is not set
|
||||
|
|
@ -487,7 +489,7 @@ CONFIG_USB_GADGET=y
|
|||
# CONFIG_USB_GADGET_ATMEL_USBA is not set
|
||||
# CONFIG_USB_GADGET_CI13XXX is not set
|
||||
# CONFIG_USB_GADGET_DEBUG_FILES is not set
|
||||
# CONFIG_USB_GADGET_DUALSPEED is not set
|
||||
CONFIG_USB_GADGET_DUALSPEED=y
|
||||
# CONFIG_USB_GADGET_DUMMY_HCD is not set
|
||||
# CONFIG_USB_GADGET_FSL_QE is not set
|
||||
# CONFIG_USB_GADGET_FSL_USB2 is not set
|
||||
|
|
@ -496,30 +498,36 @@ CONFIG_USB_GADGET=y
|
|||
# CONFIG_USB_GADGET_LANGWELL is not set
|
||||
# CONFIG_USB_GADGET_LH7A40X is not set
|
||||
# CONFIG_USB_GADGET_M66592 is not set
|
||||
# CONFIG_USB_GADGET_MUSB_HDRC is not set
|
||||
CONFIG_USB_GADGET_MUSB_HDRC=y
|
||||
# CONFIG_USB_GADGET_NET2280 is not set
|
||||
CONFIG_USB_GADGET_OMAP=y
|
||||
# CONFIG_USB_GADGET_OMAP is not set
|
||||
# CONFIG_USB_GADGET_PXA25X is not set
|
||||
# CONFIG_USB_GADGET_PXA27X is not set
|
||||
# CONFIG_USB_GADGET_R8A66597 is not set
|
||||
# CONFIG_USB_GADGET_S3C2410 is not set
|
||||
# CONFIG_USB_GADGET_S3C_HSOTG is not set
|
||||
CONFIG_USB_GADGET_SELECTED=y
|
||||
CONFIG_USB_GADGET_VBUS_DRAW=50
|
||||
CONFIG_USB_GADGET_VBUS_DRAW=100
|
||||
# CONFIG_USB_G_HID is not set
|
||||
# CONFIG_USB_G_PRINTER is not set
|
||||
# CONFIG_USB_G_SERIAL is not set
|
||||
# CONFIG_USB_G_WEBCAM is not set
|
||||
# CONFIG_USB_MIDI_GADGET is not set
|
||||
CONFIG_USB_MUSB_DEBUG=y
|
||||
CONFIG_USB_MUSB_HDRC=y
|
||||
CONFIG_USB_MUSB_HDRC_HCD=y
|
||||
# CONFIG_USB_MUSB_HOST is not set
|
||||
CONFIG_USB_MUSB_OTG=y
|
||||
# CONFIG_USB_MUSB_PERIPHERAL is not set
|
||||
# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
|
||||
# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
|
||||
CONFIG_USB_OHCI_HCD=m
|
||||
CONFIG_USB_OHCI_HCD=y
|
||||
CONFIG_USB_OHCI_HCD_OMAP1=y
|
||||
CONFIG_USB_OMAP=y
|
||||
CONFIG_USB_OTG=y
|
||||
CONFIG_USB_OTG_UTILS=y
|
||||
# CONFIG_USB_PWC is not set
|
||||
CONFIG_USB_SUPPORT=y
|
||||
CONFIG_USB_TUSB6010=y
|
||||
# CONFIG_USB_ZERO is not set
|
||||
# CONFIG_USER_NS is not set
|
||||
CONFIG_V4L_USB_DRIVERS=y
|
||||
|
|
|
|||
|
|
@ -1,7 +1,16 @@
|
|||
Index: linux-2.6.35/arch/arm/mach-omap1/board-nokia770.c
|
||||
===================================================================
|
||||
--- linux-2.6.35.orig/arch/arm/mach-omap1/board-nokia770.c 2010-08-08 12:56:15.000000000 +0200
|
||||
+++ linux-2.6.35/arch/arm/mach-omap1/board-nokia770.c 2010-08-08 12:56:30.000000000 +0200
|
||||
---
|
||||
arch/arm/mach-omap1/board-nokia770.c | 16 +
|
||||
arch/arm/mach-omap2/Kconfig | 10 +
|
||||
arch/arm/mach-omap2/Makefile | 2
|
||||
arch/arm/mach-omap2/board-n8x0-lcd.c | 127 +++++++++++++
|
||||
arch/arm/mach-omap2/board-n8x0-usb.c | 175 +++++++++++++++++++
|
||||
arch/arm/mach-omap2/board-n8x0.c | 319 +++++++++++++++++++++++++----------
|
||||
arch/arm/mach-omap2/control.c | 2
|
||||
arch/arm/mach-omap2/serial.c | 8
|
||||
8 files changed, 569 insertions(+), 90 deletions(-)
|
||||
|
||||
--- linux-2.6.35.3.orig/arch/arm/mach-omap1/board-nokia770.c
|
||||
+++ linux-2.6.35.3/arch/arm/mach-omap1/board-nokia770.c
|
||||
@@ -37,6 +37,7 @@
|
||||
#include <plat/lcd_mipid.h>
|
||||
#include <plat/mmc.h>
|
||||
|
|
@ -34,10 +43,8 @@ Index: linux-2.6.35/arch/arm/mach-omap1/board-nokia770.c
|
|||
};
|
||||
|
||||
static void mipid_shutdown(struct mipid_platform_data *pdata)
|
||||
Index: linux-2.6.35/arch/arm/mach-omap2/board-n8x0.c
|
||||
===================================================================
|
||||
--- linux-2.6.35.orig/arch/arm/mach-omap2/board-n8x0.c 2010-08-08 12:56:15.000000000 +0200
|
||||
+++ linux-2.6.35/arch/arm/mach-omap2/board-n8x0.c 2010-08-08 12:56:30.000000000 +0200
|
||||
--- linux-2.6.35.3.orig/arch/arm/mach-omap2/board-n8x0.c
|
||||
+++ linux-2.6.35.3/arch/arm/mach-omap2/board-n8x0.c
|
||||
@@ -18,8 +18,12 @@
|
||||
#include <linux/io.h>
|
||||
#include <linux/stddef.h>
|
||||
|
|
@ -51,12 +58,15 @@ Index: linux-2.6.35/arch/arm/mach-omap2/board-n8x0.c
|
|||
|
||||
#include <asm/mach/arch.h>
|
||||
#include <asm/mach-types.h>
|
||||
@@ -32,6 +36,117 @@
|
||||
@@ -32,114 +36,156 @@
|
||||
#include <plat/onenand.h>
|
||||
#include <plat/mmc.h>
|
||||
#include <plat/serial.h>
|
||||
+#include <plat/cbus.h>
|
||||
+
|
||||
|
||||
-static int slot1_cover_open;
|
||||
-static int slot2_cover_open;
|
||||
-static struct device *mmc_device;
|
||||
+#define RX51_TSC2005_RESET_GPIO 94
|
||||
+#define RX51_TSC2005_IRQ_GPIO 106
|
||||
+#define OMAP_TAG_NOKIA_BT 0x4e01
|
||||
|
|
@ -112,14 +122,32 @@ Index: linux-2.6.35/arch/arm/mach-omap2/board-n8x0.c
|
|||
+ [0x53] = KEY_DOWN,
|
||||
+ [0x55] = KEY_ENTER,
|
||||
+ [0x5f] = KEY_ESC,
|
||||
+
|
||||
|
||||
-#define TUSB6010_ASYNC_CS 1
|
||||
-#define TUSB6010_SYNC_CS 4
|
||||
-#define TUSB6010_GPIO_INT 58
|
||||
-#define TUSB6010_GPIO_ENABLE 0
|
||||
-#define TUSB6010_DMACHAN 0x3f
|
||||
+ [0x61] = KEY_U,
|
||||
+ [0x64] = KEY_LEFT,
|
||||
+
|
||||
|
||||
-#if defined(CONFIG_USB_TUSB6010) || \
|
||||
- defined(CONFIG_USB_TUSB6010_MODULE)
|
||||
-/*
|
||||
- * Enable or disable power to TUSB6010. When enabling, turn on 3.3 V and
|
||||
- * 1.5 V voltage regulators of PM companion chip. Companion chip will then
|
||||
- * provide then PGOOD signal to TUSB6010 which will release it from reset.
|
||||
- */
|
||||
-static int tusb_set_power(int state)
|
||||
-{
|
||||
- int i, retval = 0;
|
||||
+ [0x71] = KEY_I,
|
||||
+ [0x75] = KEY_KPENTER,
|
||||
+};
|
||||
+
|
||||
|
||||
- if (state) {
|
||||
- gpio_set_value(TUSB6010_GPIO_ENABLE, 1);
|
||||
- msleep(1);
|
||||
+static struct lm8323_platform_data lm8323_pdata = {
|
||||
+ .repeat = 0, /* Repeat is handled in userspace for now. */
|
||||
+ .keymap = rx44_keymap,
|
||||
|
|
@ -134,7 +162,13 @@ Index: linux-2.6.35/arch/arm/mach-omap2/board-n8x0.c
|
|||
+ //.pwm1_name = "n810::keyboard",
|
||||
+ //.pwm2_name = "n810::cover",
|
||||
+};
|
||||
+
|
||||
|
||||
- /* Wait until TUSB6010 pulls INT pin down */
|
||||
- i = 100;
|
||||
- while (i && gpio_get_value(TUSB6010_GPIO_INT)) {
|
||||
- msleep(1);
|
||||
- i--;
|
||||
- }
|
||||
+struct omap_bluetooth_config {
|
||||
+ u8 chip_type;
|
||||
+ u8 bt_wakeup_gpio;
|
||||
|
|
@ -144,7 +178,15 @@ Index: linux-2.6.35/arch/arm/mach-omap2/board-n8x0.c
|
|||
+ u8 bd_addr[6];
|
||||
+ u8 bt_sysclk;
|
||||
+};
|
||||
+
|
||||
|
||||
- if (!i) {
|
||||
- printk(KERN_ERR "tusb: powerup failed\n");
|
||||
- retval = -ENODEV;
|
||||
- }
|
||||
- } else {
|
||||
- gpio_set_value(TUSB6010_GPIO_ENABLE, 0);
|
||||
- msleep(10);
|
||||
- }
|
||||
+static struct platform_device n8x0_bt_device = {
|
||||
+ .name = "hci_h4p",
|
||||
+ .id = -1,
|
||||
|
|
@ -154,42 +196,97 @@ Index: linux-2.6.35/arch/arm/mach-omap2/board-n8x0.c
|
|||
+void __init n8x0_bt_init(void)
|
||||
+{
|
||||
+ const struct omap_bluetooth_config *bt_config;
|
||||
+
|
||||
|
||||
- return retval;
|
||||
+ bt_config = (void *) omap_get_config(OMAP_TAG_NOKIA_BT,
|
||||
+ struct omap_bluetooth_config);
|
||||
+ n8x0_bt_device.dev.platform_data = (void *) bt_config;
|
||||
+ if (platform_device_register(&n8x0_bt_device) < 0)
|
||||
+ BUG();
|
||||
+}
|
||||
+
|
||||
}
|
||||
|
||||
-static struct musb_hdrc_config musb_config = {
|
||||
- .multipoint = 1,
|
||||
- .dyn_fifo = 1,
|
||||
- .num_eps = 16,
|
||||
- .ram_bits = 12,
|
||||
+static struct omap2_mcspi_device_config mipid_mcspi_config = {
|
||||
+ .turbo_mode = 0,
|
||||
+ .single_channel = 1,
|
||||
+};
|
||||
|
||||
static int slot1_cover_open;
|
||||
static int slot2_cover_open;
|
||||
@@ -139,7 +254,34 @@ static struct omap2_mcspi_device_config
|
||||
.single_channel = 1,
|
||||
};
|
||||
|
||||
-static struct musb_hdrc_platform_data tusb_data = {
|
||||
-#if defined(CONFIG_USB_MUSB_OTG)
|
||||
- .mode = MUSB_OTG,
|
||||
-#elif defined(CONFIG_USB_MUSB_PERIPHERAL)
|
||||
- .mode = MUSB_PERIPHERAL,
|
||||
-#else /* defined(CONFIG_USB_MUSB_HOST) */
|
||||
- .mode = MUSB_HOST,
|
||||
-#endif
|
||||
- .set_power = tusb_set_power,
|
||||
- .min_power = 25, /* x2 = 50 mA drawn from VBUS as peripheral */
|
||||
- .power = 100, /* Max 100 mA VBUS for host mode */
|
||||
- .config = &musb_config,
|
||||
-};
|
||||
-
|
||||
-static void __init n8x0_usb_init(void)
|
||||
-{
|
||||
- int ret = 0;
|
||||
- static char announce[] __initdata = KERN_INFO "TUSB 6010\n";
|
||||
-
|
||||
- /* PM companion chip power control pin */
|
||||
- ret = gpio_request(TUSB6010_GPIO_ENABLE, "TUSB6010 enable");
|
||||
- if (ret != 0) {
|
||||
- printk(KERN_ERR "Could not get TUSB power GPIO%i\n",
|
||||
- TUSB6010_GPIO_ENABLE);
|
||||
- return;
|
||||
- }
|
||||
- gpio_direction_output(TUSB6010_GPIO_ENABLE, 0);
|
||||
-
|
||||
- tusb_set_power(0);
|
||||
+static int slot1_cover_open;
|
||||
+static int slot2_cover_open;
|
||||
+static struct device *mmc_device;
|
||||
|
||||
- ret = tusb6010_setup_interface(&tusb_data, TUSB6010_REFCLK_19, 2,
|
||||
- TUSB6010_ASYNC_CS, TUSB6010_SYNC_CS,
|
||||
- TUSB6010_GPIO_INT, TUSB6010_DMACHAN);
|
||||
- if (ret != 0)
|
||||
- goto err;
|
||||
|
||||
- printk(announce);
|
||||
+static struct omap2_mcspi_device_config p54spi_mcspi_config = {
|
||||
+ .turbo_mode = 0,
|
||||
+ .single_channel = 1,
|
||||
+};
|
||||
|
||||
- return;
|
||||
+#ifdef CONFIG_MACH_NOKIA_N8X0_LCD
|
||||
+extern struct mipid_platform_data n8x0_mipid_platform_data;
|
||||
+#endif
|
||||
+
|
||||
|
||||
-err:
|
||||
- gpio_free(TUSB6010_GPIO_ENABLE);
|
||||
+#ifdef CONFIG_TOUCHSCREEN_TSC2005
|
||||
+static struct tsc2005_platform_data tsc2005_config;
|
||||
+static void rx51_tsc2005_set_reset(bool enable)
|
||||
+{
|
||||
+ gpio_set_value(RX51_TSC2005_RESET_GPIO, enable);
|
||||
+}
|
||||
+
|
||||
}
|
||||
-#else
|
||||
-
|
||||
-static void __init n8x0_usb_init(void) {}
|
||||
-
|
||||
-#endif /*CONFIG_USB_TUSB6010 */
|
||||
|
||||
-
|
||||
-static struct omap2_mcspi_device_config p54spi_mcspi_config = {
|
||||
+static struct omap2_mcspi_device_config tsc2005_mcspi_config = {
|
||||
+ .turbo_mode = 0,
|
||||
+ .single_channel = 1,
|
||||
+};
|
||||
.turbo_mode = 0,
|
||||
.single_channel = 1,
|
||||
};
|
||||
+#endif
|
||||
+
|
||||
|
||||
static struct spi_board_info n800_spi_board_info[] __initdata = {
|
||||
+#ifdef CONFIG_MACH_NOKIA_N8X0_LCD
|
||||
+ {
|
||||
|
|
@ -204,7 +301,7 @@ Index: linux-2.6.35/arch/arm/mach-omap2/board-n8x0.c
|
|||
{
|
||||
.modalias = "p54spi",
|
||||
.bus_num = 2,
|
||||
@@ -147,6 +289,68 @@ static struct spi_board_info n800_spi_bo
|
||||
@@ -147,6 +193,68 @@ static struct spi_board_info n800_spi_bo
|
||||
.max_speed_hz = 48000000,
|
||||
.controller_data = &p54spi_mcspi_config,
|
||||
},
|
||||
|
|
@ -273,7 +370,7 @@ Index: linux-2.6.35/arch/arm/mach-omap2/board-n8x0.c
|
|||
};
|
||||
|
||||
#if defined(CONFIG_MTD_ONENAND_OMAP2) || \
|
||||
@@ -181,6 +385,20 @@ static struct mtd_partition onenand_part
|
||||
@@ -181,6 +289,20 @@ static struct mtd_partition onenand_part
|
||||
},
|
||||
};
|
||||
|
||||
|
|
@ -294,7 +391,7 @@ Index: linux-2.6.35/arch/arm/mach-omap2/board-n8x0.c
|
|||
static struct omap_onenand_platform_data board_onenand_data = {
|
||||
.cs = 0,
|
||||
.gpio_irq = 26,
|
||||
@@ -649,14 +867,37 @@ static void __init n8x0_init_irq(void)
|
||||
@@ -649,14 +771,39 @@ static void __init n8x0_init_irq(void)
|
||||
omap_gpio_init();
|
||||
}
|
||||
|
||||
|
|
@ -305,6 +402,8 @@ Index: linux-2.6.35/arch/arm/mach-omap2/board-n8x0.c
|
|||
+#define n8x0_mipid_init() 0
|
||||
+#define n8x0_blizzard_init() 0
|
||||
+#endif
|
||||
+
|
||||
+extern void n8x0_usb_init(void);
|
||||
+
|
||||
static void __init n8x0_init_machine(void)
|
||||
{
|
||||
|
|
@ -332,10 +431,8 @@ Index: linux-2.6.35/arch/arm/mach-omap2/board-n8x0.c
|
|||
n8x0_onenand_init();
|
||||
n8x0_mmc_init();
|
||||
n8x0_usb_init();
|
||||
Index: linux-2.6.35/arch/arm/mach-omap2/board-n8x0-lcd.c
|
||||
===================================================================
|
||||
--- /dev/null 1970-01-01 00:00:00.000000000 +0000
|
||||
+++ linux-2.6.35/arch/arm/mach-omap2/board-n8x0-lcd.c 2010-08-08 12:56:31.000000000 +0200
|
||||
--- /dev/null
|
||||
+++ linux-2.6.35.3/arch/arm/mach-omap2/board-n8x0-lcd.c
|
||||
@@ -0,0 +1,127 @@
|
||||
+/*
|
||||
+ * linux/arch/arm/mach-omap2/board-n8x0.c
|
||||
|
|
@ -464,10 +561,8 @@ Index: linux-2.6.35/arch/arm/mach-omap2/board-n8x0-lcd.c
|
|||
+
|
||||
+ printk(KERN_INFO "N8x0 Blizzard initialized");
|
||||
+}
|
||||
Index: linux-2.6.35/arch/arm/mach-omap2/board-n8x0-usb.c
|
||||
===================================================================
|
||||
--- /dev/null 1970-01-01 00:00:00.000000000 +0000
|
||||
+++ linux-2.6.35/arch/arm/mach-omap2/board-n8x0-usb.c 2010-08-08 12:56:31.000000000 +0200
|
||||
--- /dev/null
|
||||
+++ linux-2.6.35.3/arch/arm/mach-omap2/board-n8x0-usb.c
|
||||
@@ -0,0 +1,175 @@
|
||||
+/*
|
||||
+ * linux/arch/arm/mach-omap2/board-n8x0-usb.c
|
||||
|
|
@ -644,10 +739,8 @@ Index: linux-2.6.35/arch/arm/mach-omap2/board-n8x0-usb.c
|
|||
+err:
|
||||
+ gpio_free(GPIO_TUSB_ENABLE);
|
||||
+}
|
||||
Index: linux-2.6.35/arch/arm/mach-omap2/control.c
|
||||
===================================================================
|
||||
--- linux-2.6.35.orig/arch/arm/mach-omap2/control.c 2010-08-08 12:56:15.000000000 +0200
|
||||
+++ linux-2.6.35/arch/arm/mach-omap2/control.c 2010-08-08 12:56:32.000000000 +0200
|
||||
--- linux-2.6.35.3.orig/arch/arm/mach-omap2/control.c
|
||||
+++ linux-2.6.35.3/arch/arm/mach-omap2/control.c
|
||||
@@ -162,6 +162,7 @@ u16 omap_ctrl_readw(u16 offset)
|
||||
return __raw_readw(OMAP_CTRL_REGADDR(offset));
|
||||
}
|
||||
|
|
@ -664,10 +757,8 @@ Index: linux-2.6.35/arch/arm/mach-omap2/control.c
|
|||
void omap_ctrl_writel(u32 val, u16 offset)
|
||||
{
|
||||
__raw_writel(val, OMAP_CTRL_REGADDR(offset));
|
||||
Index: linux-2.6.35/arch/arm/mach-omap2/Kconfig
|
||||
===================================================================
|
||||
--- linux-2.6.35.orig/arch/arm/mach-omap2/Kconfig 2010-08-08 12:56:15.000000000 +0200
|
||||
+++ linux-2.6.35/arch/arm/mach-omap2/Kconfig 2010-08-08 12:56:33.000000000 +0200
|
||||
--- linux-2.6.35.3.orig/arch/arm/mach-omap2/Kconfig
|
||||
+++ linux-2.6.35.3/arch/arm/mach-omap2/Kconfig
|
||||
@@ -116,6 +116,16 @@ config MACH_NOKIA_N8X0
|
||||
select MACH_NOKIA_N810
|
||||
select MACH_NOKIA_N810_WIMAX
|
||||
|
|
@ -685,10 +776,8 @@ Index: linux-2.6.35/arch/arm/mach-omap2/Kconfig
|
|||
config MACH_NOKIA_RX51
|
||||
bool "Nokia RX-51 board"
|
||||
depends on ARCH_OMAP3
|
||||
Index: linux-2.6.35/arch/arm/mach-omap2/Makefile
|
||||
===================================================================
|
||||
--- linux-2.6.35.orig/arch/arm/mach-omap2/Makefile 2010-08-08 12:56:15.000000000 +0200
|
||||
+++ linux-2.6.35/arch/arm/mach-omap2/Makefile 2010-08-08 12:56:33.000000000 +0200
|
||||
--- linux-2.6.35.3.orig/arch/arm/mach-omap2/Makefile
|
||||
+++ linux-2.6.35.3/arch/arm/mach-omap2/Makefile
|
||||
@@ -116,6 +116,8 @@ obj-$(CONFIG_MACH_OMAP_3430SDP) += boar
|
||||
hsmmc.o \
|
||||
board-sdp-flash.o
|
||||
|
|
@ -698,10 +787,8 @@ Index: linux-2.6.35/arch/arm/mach-omap2/Makefile
|
|||
obj-$(CONFIG_MACH_NOKIA_RX51) += board-rx51.o \
|
||||
board-rx51-sdram.o \
|
||||
board-rx51-peripherals.o \
|
||||
Index: linux-2.6.35/arch/arm/mach-omap2/serial.c
|
||||
===================================================================
|
||||
--- linux-2.6.35.orig/arch/arm/mach-omap2/serial.c 2010-08-08 12:56:15.000000000 +0200
|
||||
+++ linux-2.6.35/arch/arm/mach-omap2/serial.c 2010-08-08 12:56:34.000000000 +0200
|
||||
--- linux-2.6.35.3.orig/arch/arm/mach-omap2/serial.c
|
||||
+++ linux-2.6.35.3/arch/arm/mach-omap2/serial.c
|
||||
@@ -495,10 +495,10 @@ static void omap_uart_idle_init(struct o
|
||||
uart->padconf = 0;
|
||||
}
|
||||
|
|
|
|||
Loading…
Reference in New Issue