ramips: add support for Omnima MiniEMBWiFi board

This patch adds support for the Omnima MiniEMBWiFi
Ralink RT3050F based board.

Based on a patch by Ivan Ignjatic <ivan at omnima.co.uk>

SVN-Revision: 29533
owl
Gabor Juhos 2011-12-14 20:51:26 +00:00
parent 7076d74b21
commit 0c38d36488
11 changed files with 140 additions and 1 deletions

View File

@ -48,6 +48,9 @@ get_status_led() {
nw718)
status_led="nw718:amber:cpu"
;;
omni-emb)
status_led="emb:green:status"
;;
pwh2004)
status_led="pwh2004:green:power"
;;

View File

@ -53,6 +53,7 @@ case "$FIRMWARE" in
pwh2004 | \
nbg-419n | \
nw718 | \
omni-emb | \
rt-n15 | \
v22rw-2x2 | \
wcr-150gn | \

View File

@ -20,7 +20,8 @@ preinit_set_mac_address() {
ifconfig eth0 hw ether $mac 2>/dev/null
;;
hw550-3g |\
nbg-419n)
nbg-419n |\
omni-emb)
mac=$(ramips_get_mac_binary factory 40)
ifconfig eth0 hw ether $mac 2>/dev/null
;;

View File

@ -80,6 +80,9 @@ ramips_board_name() {
*"NW718")
name="nw718"
;;
*"Omnima MiniEMBWiFi")
name="omni-emb"
;;
*"PWH2004")
name="pwh2004"
;;

View File

@ -23,6 +23,7 @@ platform_check_image() {
mofi3500-3gn | \
nbg-419n | \
nw718 | \
omni-emb | \
rt-g32-b1 | \
rt-n15 | \
v22rw-2x2 | \

View File

@ -32,6 +32,7 @@ enum ramips_mach_type {
RAMIPS_MACH_HW550_3G, /* Aztech HW550-3G */
RAMIPS_MACH_MOFI3500_3GN, /* MoFi Network MOFI3500-3GN */
RAMIPS_MACH_NBG_419N, /* ZyXEL NBG-419N */
RAMIPS_MACH_OMNI_EMB, /* Omnima MiniEMBWiFi */
RAMIPS_MACH_PWH2004, /* Prolink 2004H / Abocom 5205 */
RAMIPS_MACH_V22RW_2X2, /* Ralink AP-RT3052-V22RW-2X2 */
RAMIPS_MACH_WCR150GN, /* Sparklan WCR-150GN */

View File

@ -56,6 +56,11 @@ config RT305X_MACH_BC2
select RALINK_DEV_GPIO_BUTTONS
select RALINK_DEV_GPIO_LEDS
config RT305X_MACH_OMNI_EMB
bool "Omnima MiniEMBWiFi"
select RALINK_DEV_GPIO_BUTTONS
select RALINK_DEV_GPIO_LEDS
config RT305X_MACH_PWH2004
bool "Prolink PWH2004 / Abocom WR5205 support (32M RAM, 8M flash)"
select RALINK_DEV_GPIO_BUTTONS

View File

@ -20,6 +20,7 @@ obj-$(CONFIG_RT305X_MACH_HW550_3G) += mach-hw550-3g.o
obj-$(CONFIG_RT305X_MACH_MOFI3500_3GN) += mach-mofi3500-3gn.o
obj-$(CONFIG_RT305X_MACH_NBG_419N) += mach-nbg-419n.o
obj-$(CONFIG_RT305X_MACH_NW718) += mach-nw718.o
obj-$(CONFIG_RT305X_MACH_OMNI_EMB) += mach-omni-emb.o
obj-$(CONFIG_RT305X_MACH_PWH2004) += mach-pwh2004.o
obj-$(CONFIG_RT305X_MACH_RT_G32_REVB) += mach-rt-g32-revb.o
obj-$(CONFIG_RT305X_MACH_V22RW_2X2) += mach-v22rw-2x2.o

View File

@ -0,0 +1,111 @@
/*
* Omnima MiniEMBWiFi board support
*
* Copyright (C) 2011 Johnathan Boyce <jon.boyce@globalreach.eu.com>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License version 2 as published
* by the Free Software Foundation.
*/
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/partitions.h>
#include <linux/mtd/physmap.h>
#include <linux/gpio.h>
#include <asm/mach-ralink/machine.h>
#include <asm/mach-ralink/dev-gpio-buttons.h>
#include <asm/mach-ralink/dev-gpio-leds.h>
#include <asm/mach-ralink/rt305x.h>
#include <asm/mach-ralink/rt305x_regs.h>
#include "devices.h"
#define OMNI_EMB_GPIO_BUTTON_RESET 12 /* active low */
#define OMNI_EMB_BUTTONS_POLL_INTERVAL 20
#define OMNI_EMB_GPIO_LED_STATUS 9
#define OMNI_EMB_GPIO_LED_WLAN 14
#ifdef CONFIG_MTD_PARTITIONS
static struct mtd_partition emb_partitions[] = {
{
.name = "uboot",
.offset = 0,
.size = 0x030000,
}, {
.name = "uboot-config",
.offset = 0x030000,
.size = 0x040000,
.mask_flags = MTD_WRITEABLE,
}, {
.name = "factory",
.offset = 0x040000,
.size = 0x050000,
.mask_flags = MTD_WRITEABLE,
}, {
.name = "linux",
.offset = 0x050000,
.size = 0x100000,
}, {
.name = "rootfs",
.offset = 0x150000,
.size = 0x6B0000,
}
};
#endif /* CONFIG_MTD_PARTITIONS */
static struct physmap_flash_data omni_emb_flash_data = {
#ifdef CONFIG_MTD_PARTITIONS
.nr_parts = ARRAY_SIZE(emb_partitions),
.parts = emb_partitions,
#endif
};
static struct gpio_led omni_emb_leds_gpio[] __initdata = {
{
.name = "emb:green:status",
.gpio = OMNI_EMB_GPIO_LED_STATUS,
.active_low = 1,
}, {
.name = "emb:green:wlan",
.gpio = OMNI_EMB_GPIO_LED_WLAN,
.active_low = 1,
}
};
static struct gpio_button omni_emb_gpio_buttons[] __initdata = {
{
.desc = "reset",
.type = EV_KEY,
.code = KEY_RESTART,
.threshold = 3,
.gpio = OMNI_EMB_GPIO_BUTTON_RESET,
.active_low = 1,
}
};
static void __init omni_emb_init(void)
{
rt305x_esw_data.vlan_config = RT305X_ESW_VLAN_CONFIG_LLLLW;
rt305x_gpio_init(RT305X_GPIO_MODE_GPIO << RT305X_GPIO_MODE_UART0_SHIFT);
ramips_register_gpio_leds(-1, ARRAY_SIZE(omni_emb_leds_gpio),
omni_emb_leds_gpio);
ramips_register_gpio_buttons(-1, OMNI_EMB_BUTTONS_POLL_INTERVAL,
ARRAY_SIZE(omni_emb_gpio_buttons),
omni_emb_gpio_buttons);
rt305x_register_flash(0, &omni_emb_flash_data);
rt305x_register_ethernet();
rt305x_register_wifi();
rt305x_register_wdt();
rt305x_register_usb();
}
MIPS_MACHINE(RAMIPS_MACH_OMNI_EMB, "OMNI-EMB", "Omnima MiniEMBWiFi",
omni_emb_init);

View File

@ -139,6 +139,12 @@ define Image/Build/Template/NW718
$(call BuildFirmware/NW718,$(1),$(2),board=$(3),mtdlayout_nw718,851968,2949120)
endef
console_OMNIEMB=ttyS1,57600
mtdlayout_ONMIEMB=mtdparts=physmap-flash.0:192k(u-boot)ro,64k(u-boot-env)ro,64k(factory)ro,1024k(kernel),6848k(rootfs),7872k@0x50000(firmware)
define Image/Build/Template/OMNIEMB
$(call BuildFirmware/Generic,$(1),$(2),board=$(3) console=$(console_OMNIEMB),mtdlayout_OMNIEMB,1048576,7012352)
endef
define Image/Build/Profile/DIR300B1
$(call Image/Build/Template/DIR300B1,$(1),dir-300-b1,DIR-300-B1,wrgn23_dlwbr_dir300b)
$(call Image/Build/Template/DIR300B1,$(1),dir-600-b1,DIR-600-B1,wrgn23_dlwbr_dir600b)
@ -173,6 +179,10 @@ define Image/Build/Profile/NW718
$(call Image/Build/Template/NW718,$(1),nw718,NW718)
endef
define Image/Build/Profile/OMNIEMB
$(call Image/Build/Template/OMNIEMB,$(1),omni-emb,OMNI-EMB)
endef
define Image/Build/Profile/PWH2004
$(call Image/Build/Template/GENERIC_8M,$(1),pwh2004,PWH2004)
endef
@ -248,6 +258,7 @@ define Image/Build/Profile/Default
$(call Image/Build/Profile/V22RW2X2,$(1))
$(call Image/Build/Profile/NBG419N,$(1))
$(call Image/Build/Profile/NW718,$(1))
$(call Image/Build/Profile/OMNIEMB,$(1))
$(call Image/Build/Profile/PWH2004,$(1))
$(call Image/Build/Profile/WHRG300N,$(1))
$(call Image/Build/Profile/WCR150GN,$(1))

View File

@ -100,6 +100,7 @@ CONFIG_RT305X_MACH_HW550_3G=y
CONFIG_RT305X_MACH_MOFI3500_3GN=y
CONFIG_RT305X_MACH_NBG_419N=y
CONFIG_RT305X_MACH_NW718=y
CONFIG_RT305X_MACH_OMNI_EMB=y
CONFIG_RT305X_MACH_PWH2004=y
CONFIG_RT305X_MACH_RT_G32_REVB=y
CONFIG_RT305X_MACH_V22RW_2X2=y