openwrt-owl/target/linux/generic/patches-3.3/132-solos-dma.patch

commit b4bd8ad9bb311e8536f726f7a633620ccd358cde
Author: David Woodhouse <dwmw2@infradead.org>
Date:   Thu May 24 04:58:27 2012 +0000

    solos-pci: Fix DMA support
    
    DMA support has finally made its way to the top of the TODO list, having
    realised that a Geode using MMIO can't keep up with two ADSL2+ lines
    each running at 21Mb/s.
    
    This patch fixes a couple of bugs in the DMA support in the driver, so
    once the corresponding FPGA update is complete and tested everything
    should work properly.
    
    We weren't storing the currently-transmitting skb, so we were never
    unmapping it and never freeing/popping it when the TX was done.
    And the addition of pci_set_master() is fairly self-explanatory.
    
    Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
    Cc: stable@kernel.org
    Signed-off-by: David S. Miller <davem@davemloft.net>

commit 152a2a8b5e1d4cbe91a7c66f1028db15164a3766
Author: David Woodhouse <David.Woodhouse@intel.com>
Date:   Wed Dec 19 11:01:21 2012 +0000

    solos-pci: ensure all TX packets are aligned to 4 bytes
    
    The FPGA can't handled unaligned DMA (yet). So copy into an aligned buffer,
    if skb->data isn't suitably aligned.
    
    Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
    Signed-off-by: David S. Miller <davem@davemloft.net>

commit 13af816469db3449c072afbae6c4c1bd9ccecccb
Author: Nathan Williams <nathan@traverse.com.au>
Date:   Wed Dec 19 11:01:20 2012 +0000

    solos-pci: add firmware upgrade support for new models
    
    Signed-off-by: Nathan Williams <nathan@traverse.com.au>
    Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
    Signed-off-by: David S. Miller <davem@davemloft.net>

commit 7fbdadb5e951e4f0c0fc991ff5f50295568786e6
Author: Nathan Williams <nathan@traverse.com.au>
Date:   Wed Dec 19 11:01:19 2012 +0000

    solos-pci: remove superfluous debug output
    
    Signed-off-by: Nathan Williams <nathan@traverse.com.au>
    Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
    Signed-off-by: David S. Miller <davem@davemloft.net>

commit f9baad02e7411d9f38d5ebe1a1cdcde4ceec100d
Author: Nathan Williams <nathan@traverse.com.au>
Date:   Wed Dec 19 11:01:18 2012 +0000

    solos-pci: add GPIO support for newer versions on Geos board
    
    dwmw2: Tidy up a little, simpler matching on which GPIO is being accessed,
           only register on newer boards, register under PCI device instead of
           duplicating them under each ATM device.
    
    Signed-off-by: Nathan Williams <nathan@traverse.com.au>
    Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
    Signed-off-by: David S. Miller <davem@davemloft.net>

commit cae49ede00ec3d0cda290b03fee55b72b49efc11
Author: David Woodhouse <dwmw2@infradead.org>
Date:   Tue Dec 11 14:57:14 2012 +0000

    solos-pci: fix double-free of TX skb in DMA mode
    
    We weren't clearing card->tx_skb[port] when processing the TX done interrupt.
    If there wasn't another skb ready to transmit immediately, this led to a
    double-free because we'd free it *again* next time we did have a packet to
    send.
    
    Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
    Cc: stable@kernel.org
    Signed-off-by: David S. Miller <davem@davemloft.net>

==
There is a typo here so we do a double lock instead of an unlock.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
---
Only needed in linux-next.  Introduced in f9baad02e7411d9 [14/17]
solos-pci: add GPIO support for newer versions on Geos board


--- a/drivers/atm/solos-pci.c
+++ b/drivers/atm/solos-pci.c
@@ -42,7 +42,8 @@
 #include <linux/swab.h>
 #include <linux/slab.h>
 
-#define VERSION "0.07"
+#define VERSION "1.04"
+#define DRIVER_VERSION 0x01
 #define PTAG "solos-pci"
 
 #define CONFIG_RAM_SIZE	128
@@ -56,16 +57,21 @@
 #define FLASH_BUSY	0x60
 #define FPGA_MODE	0x5C
 #define FLASH_MODE	0x58
+#define GPIO_STATUS	0x54
+#define DRIVER_VER	0x50
 #define TX_DMA_ADDR(port)	(0x40 + (4 * (port)))
 #define RX_DMA_ADDR(port)	(0x30 + (4 * (port)))
 
 #define DATA_RAM_SIZE	32768
 #define BUF_SIZE	2048
 #define OLD_BUF_SIZE	4096 /* For FPGA versions <= 2*/
-#define FPGA_PAGE	528 /* FPGA flash page size*/
-#define SOLOS_PAGE	512 /* Solos flash page size*/
-#define FPGA_BLOCK	(FPGA_PAGE * 8) /* FPGA flash block size*/
-#define SOLOS_BLOCK	(SOLOS_PAGE * 8) /* Solos flash block size*/
+/* Old boards use ATMEL AD45DB161D flash */
+#define ATMEL_FPGA_PAGE	528 /* FPGA flash page size*/
+#define ATMEL_SOLOS_PAGE	512 /* Solos flash page size*/
+#define ATMEL_FPGA_BLOCK	(ATMEL_FPGA_PAGE * 8) /* FPGA block size*/
+#define ATMEL_SOLOS_BLOCK	(ATMEL_SOLOS_PAGE * 8) /* Solos block size*/
+/* Current boards use M25P/M25PE SPI flash */
+#define SPI_FLASH_BLOCK	(256 * 64)
 
 #define RX_BUF(card, nr) ((card->buffers) + (nr)*(card->buffer_size)*2)
 #define TX_BUF(card, nr) ((card->buffers) + (nr)*(card->buffer_size)*2 + (card->buffer_size))
@@ -123,11 +129,14 @@ struct solos_card {
 	struct sk_buff_head cli_queue[4];
 	struct sk_buff *tx_skb[4];
 	struct sk_buff *rx_skb[4];
+	unsigned char *dma_bounce;
 	wait_queue_head_t param_wq;
 	wait_queue_head_t fw_wq;
 	int using_dma;
+	int dma_alignment;
 	int fpga_version;
 	int buffer_size;
+	int atmel_flash;
 };
 
 
@@ -452,7 +461,6 @@ static ssize_t console_show(struct devic
 
 	len = skb->len;
 	memcpy(buf, skb->data, len);
-	dev_dbg(&card->dev->dev, "len: %d\n", len);
 
 	kfree_skb(skb);
 	return len;
@@ -499,6 +507,78 @@ static ssize_t console_store(struct devi
 	return err?:count;
 }
 
+struct geos_gpio_attr {
+	struct device_attribute attr;
+	int offset;
+};
+
+#define SOLOS_GPIO_ATTR(_name, _mode, _show, _store, _offset)	\
+	struct geos_gpio_attr gpio_attr_##_name = {		\
+		.attr = __ATTR(_name, _mode, _show, _store),	\
+		.offset = _offset }
+
+static ssize_t geos_gpio_store(struct device *dev, struct device_attribute *attr,
+			       const char *buf, size_t count)
+{
+	struct pci_dev *pdev = container_of(dev, struct pci_dev, dev);
+	struct geos_gpio_attr *gattr = container_of(attr, struct geos_gpio_attr, attr);
+	struct solos_card *card = pci_get_drvdata(pdev);
+	uint32_t data32;
+
+	if (count != 1 && (count != 2 || buf[1] != '\n'))
+		return -EINVAL;
+
+	spin_lock_irq(&card->param_queue_lock);
+	data32 = ioread32(card->config_regs + GPIO_STATUS);
+	if (buf[0] == '1') {
+		data32 |= 1 << gattr->offset;
+		iowrite32(data32, card->config_regs + GPIO_STATUS);
+	} else if (buf[0] == '0') {
+		data32 &= ~(1 << gattr->offset);
+		iowrite32(data32, card->config_regs + GPIO_STATUS);
+	} else {
+		count = -EINVAL;
+	}
+	spin_unlock_irq(&card->param_queue_lock);
+	return count;
+}
+
+static ssize_t geos_gpio_show(struct device *dev, struct device_attribute *attr,
+			      char *buf)
+{
+	struct pci_dev *pdev = container_of(dev, struct pci_dev, dev);
+	struct geos_gpio_attr *gattr = container_of(attr, struct geos_gpio_attr, attr);
+	struct solos_card *card = pci_get_drvdata(pdev);
+	uint32_t data32;
+
+	data32 = ioread32(card->config_regs + GPIO_STATUS);
+	data32 = (data32 >> gattr->offset) & 1;
+
+	return sprintf(buf, "%d\n", data32);
+}
+
+static ssize_t hardware_show(struct device *dev, struct device_attribute *attr,
+			     char *buf)
+{
+	struct pci_dev *pdev = container_of(dev, struct pci_dev, dev);
+	struct geos_gpio_attr *gattr = container_of(attr, struct geos_gpio_attr, attr);
+	struct solos_card *card = pci_get_drvdata(pdev);
+	uint32_t data32;
+
+	data32 = ioread32(card->config_regs + GPIO_STATUS);
+	switch (gattr->offset) {
+	case 0:
+		/* HardwareVersion */
+		data32 = data32 & 0x1F;
+		break;
+	case 1:
+		/* HardwareVariant */
+		data32 = (data32 >> 5) & 0x0F;
+		break;
+	}
+	return sprintf(buf, "%d\n", data32);
+}
+
 static DEVICE_ATTR(console, 0644, console_show, console_store);
 
 
@@ -507,6 +587,14 @@ static DEVICE_ATTR(console, 0644, consol
 
 #include "solos-attrlist.c"
 
+static SOLOS_GPIO_ATTR(GPIO1, 0644, geos_gpio_show, geos_gpio_store, 9);
+static SOLOS_GPIO_ATTR(GPIO2, 0644, geos_gpio_show, geos_gpio_store, 10);
+static SOLOS_GPIO_ATTR(GPIO3, 0644, geos_gpio_show, geos_gpio_store, 11);
+static SOLOS_GPIO_ATTR(GPIO4, 0644, geos_gpio_show, geos_gpio_store, 12);
+static SOLOS_GPIO_ATTR(GPIO5, 0644, geos_gpio_show, geos_gpio_store, 13);
+static SOLOS_GPIO_ATTR(PushButton, 0444, geos_gpio_show, NULL, 14);
+static SOLOS_GPIO_ATTR(HardwareVersion, 0444, hardware_show, NULL, 0);
+static SOLOS_GPIO_ATTR(HardwareVariant, 0444, hardware_show, NULL, 1);
 #undef SOLOS_ATTR_RO
 #undef SOLOS_ATTR_RW
 
@@ -523,6 +611,23 @@ static struct attribute_group solos_attr
 	.name = "parameters",
 };
 
+static struct attribute *gpio_attrs[] = {
+	&gpio_attr_GPIO1.attr.attr,
+	&gpio_attr_GPIO2.attr.attr,
+	&gpio_attr_GPIO3.attr.attr,
+	&gpio_attr_GPIO4.attr.attr,
+	&gpio_attr_GPIO5.attr.attr,
+	&gpio_attr_PushButton.attr.attr,
+	&gpio_attr_HardwareVersion.attr.attr,
+	&gpio_attr_HardwareVariant.attr.attr,
+	NULL
+};
+
+static struct attribute_group gpio_attr_group = {
+	.attrs = gpio_attrs,
+	.name = "gpio",
+};
+
 static int flash_upgrade(struct solos_card *card, int chip)
 {
 	const struct firmware *fw;
@@ -534,16 +639,25 @@ static int flash_upgrade(struct solos_ca
 	switch (chip) {
 	case 0:
 		fw_name = "solos-FPGA.bin";
-		blocksize = FPGA_BLOCK;
+		if (card->atmel_flash)
+			blocksize = ATMEL_FPGA_BLOCK;
+		else
+			blocksize = SPI_FLASH_BLOCK;
 		break;
 	case 1:
 		fw_name = "solos-Firmware.bin";
-		blocksize = SOLOS_BLOCK;
+		if (card->atmel_flash)
+			blocksize = ATMEL_SOLOS_BLOCK;
+		else
+			blocksize = SPI_FLASH_BLOCK;
 		break;
 	case 2:
 		if (card->fpga_version > LEGACY_BUFFERS){
 			fw_name = "solos-db-FPGA.bin";
-			blocksize = FPGA_BLOCK;
+			if (card->atmel_flash)
+				blocksize = ATMEL_FPGA_BLOCK;
+			else
+				blocksize = SPI_FLASH_BLOCK;
 		} else {
 			dev_info(&card->dev->dev, "FPGA version doesn't support"
 					" daughter board upgrades\n");
@@ -553,7 +667,10 @@ static int flash_upgrade(struct solos_ca
 	case 3:
 		if (card->fpga_version > LEGACY_BUFFERS){
 			fw_name = "solos-Firmware.bin";
-			blocksize = SOLOS_BLOCK;
+			if (card->atmel_flash)
+				blocksize = ATMEL_SOLOS_BLOCK;
+			else
+				blocksize = SPI_FLASH_BLOCK;
 		} else {
 			dev_info(&card->dev->dev, "FPGA version doesn't support"
 					" daughter board upgrades\n");
@@ -569,6 +686,9 @@ static int flash_upgrade(struct solos_ca
 
 	dev_info(&card->dev->dev, "Flash upgrade starting\n");
 
+	/* New FPGAs require driver version before permitting flash upgrades */
+	iowrite32(DRIVER_VERSION, card->config_regs + DRIVER_VER);
+
 	numblocks = fw->size / blocksize;
 	dev_info(&card->dev->dev, "Firmware size: %zd\n", fw->size);
 	dev_info(&card->dev->dev, "Number of blocks: %d\n", numblocks);
@@ -598,9 +718,13 @@ static int flash_upgrade(struct solos_ca
 		/* dev_info(&card->dev->dev, "Set FPGA Flash mode to Block Write\n"); */
 		iowrite32(((chip * 2) + 1), card->config_regs + FLASH_MODE);
 
-		/* Copy block to buffer, swapping each 16 bits */
+		/* Copy block to buffer, swapping each 16 bits for Atmel flash */
 		for(i = 0; i < blocksize; i += 4) {
-			uint32_t word = swahb32p((uint32_t *)(fw->data + offset + i));
+			uint32_t word;
+			if (card->atmel_flash)
+				word = swahb32p((uint32_t *)(fw->data + offset + i));
+			else
+				word = *(uint32_t *)(fw->data + offset + i);
 			if(card->fpga_version > LEGACY_BUFFERS)
 				iowrite32(word, FLASH_BUF + i);
 			else
@@ -945,10 +1069,11 @@ static uint32_t fpga_tx(struct solos_car
 	for (port = 0; tx_pending; tx_pending >>= 1, port++) {
 		if (tx_pending & 1) {
 			struct sk_buff *oldskb = card->tx_skb[port];
-			if (oldskb)
+			if (oldskb) {
 				pci_unmap_single(card->dev, SKB_CB(oldskb)->dma_addr,
 						 oldskb->len, PCI_DMA_TODEVICE);
-
+				card->tx_skb[port] = NULL;
+			}
 			spin_lock(&card->tx_queue_lock);
 			skb = skb_dequeue(&card->tx_queue[port]);
 			if (!skb)
@@ -960,8 +1085,14 @@ static uint32_t fpga_tx(struct solos_car
 				tx_started |= 1 << port;
 				oldskb = skb; /* We're done with this skb already */
 			} else if (skb && card->using_dma) {
-				SKB_CB(skb)->dma_addr = pci_map_single(card->dev, skb->data,
+				unsigned char *data = skb->data;
+				if ((unsigned long)data & card->dma_alignment) {
+					data = card->dma_bounce + (BUF_SIZE * port);
+					memcpy(data, skb->data, skb->len);
+				}
+				SKB_CB(skb)->dma_addr = pci_map_single(card->dev, data,
 								       skb->len, PCI_DMA_TODEVICE);
+				card->tx_skb[port] = skb;
 				iowrite32(SKB_CB(skb)->dma_addr,
 					  card->config_regs + TX_DMA_ADDR(port));
 			}
@@ -1133,17 +1264,33 @@ static int fpga_probe(struct pci_dev *de
 		db_fpga_upgrade = db_firmware_upgrade = 0;
 	}
 
-	if (card->fpga_version >= DMA_SUPPORTED){
+	/* Stopped using Atmel flash after 0.03-38 */
+	if (fpga_ver < 39)
+		card->atmel_flash = 1;
+	else
+		card->atmel_flash = 0;
+
+	data32 = ioread32(card->config_regs + PORTS);
+	card->nr_ports = (data32 & 0x000000FF);
+
+	if (card->fpga_version >= DMA_SUPPORTED) {
+		pci_set_master(dev);
 		card->using_dma = 1;
+		if (1) { /* All known FPGA versions so far */
+			card->dma_alignment = 3;
+			card->dma_bounce = kmalloc(card->nr_ports * BUF_SIZE, GFP_KERNEL);
+			if (!card->dma_bounce) {
+				dev_warn(&card->dev->dev, "Failed to allocate DMA bounce buffers\n");
+				/* Fallback to MMIO doesn't work */
+				goto out_unmap_both;
+			}
+		}
 	} else {
 		card->using_dma = 0;
 		/* Set RX empty flag for all ports */
 		iowrite32(0xF0, card->config_regs + FLAGS_ADDR);
 	}
 
-	data32 = ioread32(card->config_regs + PORTS);
-	card->nr_ports = (data32 & 0x000000FF);
-
 	pci_set_drvdata(dev, card);
 
 	tasklet_init(&card->tlet, solos_bh, (unsigned long)card);
@@ -1178,6 +1325,10 @@ static int fpga_probe(struct pci_dev *de
 	if (err)
 		goto out_free_irq;
 
+	if (card->fpga_version >= DMA_SUPPORTED &&
+	    sysfs_create_group(&card->dev->dev.kobj, &gpio_attr_group))
+		dev_err(&card->dev->dev, "Could not register parameter group for GPIOs\n");
+
 	return 0;
 
  out_free_irq:
@@ -1186,6 +1337,7 @@ static int fpga_probe(struct pci_dev *de
 	tasklet_kill(&card->tlet);
 	
  out_unmap_both:
+	kfree(card->dma_bounce);
 	pci_set_drvdata(dev, NULL);
 	pci_iounmap(dev, card->buffers);
  out_unmap_config:
@@ -1288,11 +1440,16 @@ static void fpga_remove(struct pci_dev *
 	iowrite32(1, card->config_regs + FPGA_MODE);
 	(void)ioread32(card->config_regs + FPGA_MODE); 
 
+	if (card->fpga_version >= DMA_SUPPORTED)
+		sysfs_remove_group(&card->dev->dev.kobj, &gpio_attr_group);
+
 	atm_remove(card);
 
 	free_irq(dev->irq, card);
 	tasklet_kill(&card->tlet);
 
+	kfree(card->dma_bounce);
+
 	/* Release device from reset */
 	iowrite32(0, card->config_regs + FPGA_MODE);
 	(void)ioread32(card->config_regs + FPGA_MODE);