mirror of https://github.com/hak5/openwrt-owl.git
2024 lines
120 KiB
Diff
2024 lines
120 KiB
Diff
|
--- a/drivers/net/ethernet/lantiq_xrx200.c
|
||
|
|
+++ b/drivers/net/ethernet/lantiq_xrx200.c
|
||
|
|
@@ -16,6 +16,7 @@
|
||
|
|
* Copyright (C) 2012 John Crispin <blogic@openwrt.org>
|
||
|
|
*/
|
||
|
|
|
||
|
|
+#include <linux/switch.h>
|
||
|
|
#include <linux/etherdevice.h>
|
||
|
|
#include <linux/module.h>
|
||
|
|
#include <linux/platform_device.h>
|
||
|
|
@@ -31,6 +32,7 @@
|
||
|
|
#include <lantiq_soc.h>
|
||
|
|
|
||
|
|
#include "lantiq_pce.h"
|
||
|
|
+#include "lantiq_xrx200_sw.h"
|
||
|
|
|
||
|
|
#define SW_POLLING
|
||
|
|
#define SW_ROUTING
|
||
|
|
@@ -46,6 +48,10 @@
|
||
|
|
#define XRX200_MAX_DEV 1
|
||
|
|
#endif
|
||
|
|
|
||
|
|
+#define XRX200_MAX_VLAN 64
|
||
|
|
+#define XRX200_PCE_ACTVLAN_IDX 0x01
|
||
|
|
+#define XRX200_PCE_VLANMAP_IDX 0x02
|
||
|
|
+
|
||
|
|
#define XRX200_MAX_PORT 7
|
||
|
|
#define XRX200_MAX_DMA 8
|
||
|
|
|
||
|
|
@@ -58,7 +64,6 @@
|
||
|
|
#define XRX200_PORT_TYPE_MAC 2
|
||
|
|
|
||
|
|
/* DMA */
|
||
|
|
-#define XRX200_DMA_CRC_LEN 0x4
|
||
|
|
#define XRX200_DMA_DATA_LEN 0x600
|
||
|
|
#define XRX200_DMA_IRQ INT_NUM_IM2_IRL0
|
||
|
|
#define XRX200_DMA_RX 0
|
||
|
|
@@ -225,6 +230,8 @@ struct xrx200_hw {
|
||
|
|
unsigned short wan_map;
|
||
|
|
|
||
|
|
spinlock_t lock;
|
||
|
|
+
|
||
|
|
+ struct switch_dev swdev;
|
||
|
|
};
|
||
|
|
|
||
|
|
struct xrx200_priv {
|
||
|
|
@@ -233,7 +240,8 @@ struct xrx200_priv {
|
||
|
|
|
||
|
|
struct xrx200_port port[XRX200_MAX_PORT];
|
||
|
|
int num_port;
|
||
|
|
- int wan;
|
||
|
|
+ bool wan;
|
||
|
|
+ bool sw;
|
||
|
|
unsigned short port_map;
|
||
|
|
unsigned char mac[6];
|
||
|
|
|
||
|
|
@@ -265,6 +273,585 @@ static __iomem void *xrx200_pmac_membase
|
||
|
|
#define ltq_pmac_w32_mask(x, y, z) \
|
||
|
|
ltq_w32_mask(x, y, xrx200_pmac_membase + (z))
|
||
|
|
|
||
|
|
+#define XRX200_GLOBAL_REGATTR(reg) \
|
||
|
|
+ .id = reg, \
|
||
|
|
+ .type = SWITCH_TYPE_INT, \
|
||
|
|
+ .set = xrx200_set_global_attr, \
|
||
|
|
+ .get = xrx200_get_global_attr
|
||
|
|
+
|
||
|
|
+#define XRX200_PORT_REGATTR(reg) \
|
||
|
|
+ .id = reg, \
|
||
|
|
+ .type = SWITCH_TYPE_INT, \
|
||
|
|
+ .set = xrx200_set_port_attr, \
|
||
|
|
+ .get = xrx200_get_port_attr
|
||
|
|
+
|
||
|
|
+static int xrx200sw_read_x(int reg, int x)
|
||
|
|
+{
|
||
|
|
+ int value, mask, addr;
|
||
|
|
+
|
||
|
|
+ addr = xrx200sw_reg[reg].offset + (xrx200sw_reg[reg].mult * x);
|
||
|
|
+ value = ltq_switch_r32(addr);
|
||
|
|
+ mask = (1 << xrx200sw_reg[reg].size) - 1;
|
||
|
|
+ value = (value >> xrx200sw_reg[reg].shift);
|
||
|
|
+
|
||
|
|
+ return (value & mask);
|
||
|
|
+}
|
||
|
|
+
|
||
|
|
+static int xrx200sw_read(int reg)
|
||
|
|
+{
|
||
|
|
+ return xrx200sw_read_x(reg, 0);
|
||
|
|
+}
|
||
|
|
+
|
||
|
|
+static void xrx200sw_write_x(int value, int reg, int x)
|
||
|
|
+{
|
||
|
|
+ int mask, addr;
|
||
|
|
+
|
||
|
|
+ addr = xrx200sw_reg[reg].offset + (xrx200sw_reg[reg].mult * x);
|
||
|
|
+ mask = (1 << xrx200sw_reg[reg].size) - 1;
|
||
|
|
+ mask = (mask << xrx200sw_reg[reg].shift);
|
||
|
|
+ value = (value << xrx200sw_reg[reg].shift) & mask;
|
||
|
|
+
|
||
|
|
+ ltq_switch_w32_mask(mask, value, addr);
|
||
|
|
+}
|
||
|
|
+
|
||
|
|
+static void xrx200sw_write(int value, int reg)
|
||
|
|
+{
|
||
|
|
+ xrx200sw_write_x(value, reg, 0);
|
||
|
|
+}
|
||
|
|
+
|
||
|
|
+struct xrx200_pce_table_entry {
|
||
|
|
+ int index; // PCE_TBL_ADDR.ADDR = pData->table_index
|
||
|
|
+ int table; // PCE_TBL_CTRL.ADDR = pData->table
|
||
|
|
+ unsigned short key[8];
|
||
|
|
+ unsigned short val[5];
|
||
|
|
+ unsigned short mask;
|
||
|
|
+ unsigned short type;
|
||
|
|
+ unsigned short valid;
|
||
|
|
+ unsigned short gmap;
|
||
|
|
+};
|
||
|
|
+
|
||
|
|
+static int xrx200_pce_table_entry_read(struct xrx200_pce_table_entry *tbl)
|
||
|
|
+{
|
||
|
|
+ // wait until hardware is ready
|
||
|
|
+ while (xrx200sw_read(XRX200_PCE_TBL_CTRL_BAS)) {};
|
||
|
|
+
|
||
|
|
+ // prepare the table access:
|
||
|
|
+ // PCE_TBL_ADDR.ADDR = pData->table_index
|
||
|
|
+ xrx200sw_write(tbl->index, XRX200_PCE_TBL_ADDR_ADDR);
|
||
|
|
+ // PCE_TBL_CTRL.ADDR = pData->table
|
||
|
|
+ xrx200sw_write(tbl->table, XRX200_PCE_TBL_CTRL_ADDR);
|
||
|
|
+
|
||
|
|
+ //(address-based read)
|
||
|
|
+ xrx200sw_write(0, XRX200_PCE_TBL_CTRL_OPMOD); // OPMOD_ADRD
|
||
|
|
+
|
||
|
|
+ xrx200sw_write(1, XRX200_PCE_TBL_CTRL_BAS); // start access
|
||
|
|
+
|
||
|
|
+ // wait until hardware is ready
|
||
|
|
+ while (xrx200sw_read(XRX200_PCE_TBL_CTRL_BAS)) {};
|
||
|
|
+
|
||
|
|
+ // read the keys
|
||
|
|
+ tbl->key[7] = xrx200sw_read(XRX200_PCE_TBL_KEY_7);
|
||
|
|
+ tbl->key[6] = xrx200sw_read(XRX200_PCE_TBL_KEY_6);
|
||
|
|
+ tbl->key[5] = xrx200sw_read(XRX200_PCE_TBL_KEY_5);
|
||
|
|
+ tbl->key[4] = xrx200sw_read(XRX200_PCE_TBL_KEY_4);
|
||
|
|
+ tbl->key[3] = xrx200sw_read(XRX200_PCE_TBL_KEY_3);
|
||
|
|
+ tbl->key[2] = xrx200sw_read(XRX200_PCE_TBL_KEY_2);
|
||
|
|
+ tbl->key[1] = xrx200sw_read(XRX200_PCE_TBL_KEY_1);
|
||
|
|
+ tbl->key[0] = xrx200sw_read(XRX200_PCE_TBL_KEY_0);
|
||
|
|
+
|
||
|
|
+ // read the values
|
||
|
|
+ tbl->val[4] = xrx200sw_read(XRX200_PCE_TBL_VAL_4);
|
||
|
|
+ tbl->val[3] = xrx200sw_read(XRX200_PCE_TBL_VAL_3);
|
||
|
|
+ tbl->val[2] = xrx200sw_read(XRX200_PCE_TBL_VAL_2);
|
||
|
|
+ tbl->val[1] = xrx200sw_read(XRX200_PCE_TBL_VAL_1);
|
||
|
|
+ tbl->val[0] = xrx200sw_read(XRX200_PCE_TBL_VAL_0);
|
||
|
|
+
|
||
|
|
+ // read the mask
|
||
|
|
+ tbl->mask = xrx200sw_read(XRX200_PCE_TBL_MASK_0);
|
||
|
|
+ // read the type
|
||
|
|
+ tbl->type = xrx200sw_read(XRX200_PCE_TBL_CTRL_TYPE);
|
||
|
|
+ // read the valid flag
|
||
|
|
+ tbl->valid = xrx200sw_read(XRX200_PCE_TBL_CTRL_VLD);
|
||
|
|
+ // read the group map
|
||
|
|
+ tbl->gmap = xrx200sw_read(XRX200_PCE_TBL_CTRL_GMAP);
|
||
|
|
+
|
||
|
|
+ return 0;
|
||
|
|
+}
|
||
|
|
+
|
||
|
|
+static int xrx200_pce_table_entry_write(struct xrx200_pce_table_entry *tbl)
|
||
|
|
+{
|
||
|
|
+ // wait until hardware is ready
|
||
|
|
+ while (xrx200sw_read(XRX200_PCE_TBL_CTRL_BAS)) {};
|
||
|
|
+
|
||
|
|
+ // prepare the table access:
|
||
|
|
+ // PCE_TBL_ADDR.ADDR = pData->table_index
|
||
|
|
+ xrx200sw_write(tbl->index, XRX200_PCE_TBL_ADDR_ADDR);
|
||
|
|
+ // PCE_TBL_CTRL.ADDR = pData->table
|
||
|
|
+ xrx200sw_write(tbl->table, XRX200_PCE_TBL_CTRL_ADDR);
|
||
|
|
+
|
||
|
|
+ //(address-based write)
|
||
|
|
+ xrx200sw_write(1, XRX200_PCE_TBL_CTRL_OPMOD); // OPMOD_ADRD
|
||
|
|
+
|
||
|
|
+ // read the keys
|
||
|
|
+ xrx200sw_write(tbl->key[7], XRX200_PCE_TBL_KEY_7);
|
||
|
|
+ xrx200sw_write(tbl->key[6], XRX200_PCE_TBL_KEY_6);
|
||
|
|
+ xrx200sw_write(tbl->key[5], XRX200_PCE_TBL_KEY_5);
|
||
|
|
+ xrx200sw_write(tbl->key[4], XRX200_PCE_TBL_KEY_4);
|
||
|
|
+ xrx200sw_write(tbl->key[3], XRX200_PCE_TBL_KEY_3);
|
||
|
|
+ xrx200sw_write(tbl->key[2], XRX200_PCE_TBL_KEY_2);
|
||
|
|
+ xrx200sw_write(tbl->key[1], XRX200_PCE_TBL_KEY_1);
|
||
|
|
+ xrx200sw_write(tbl->key[0], XRX200_PCE_TBL_KEY_0);
|
||
|
|
+
|
||
|
|
+ // read the values
|
||
|
|
+ xrx200sw_write(tbl->val[4], XRX200_PCE_TBL_VAL_4);
|
||
|
|
+ xrx200sw_write(tbl->val[3], XRX200_PCE_TBL_VAL_3);
|
||
|
|
+ xrx200sw_write(tbl->val[2], XRX200_PCE_TBL_VAL_2);
|
||
|
|
+ xrx200sw_write(tbl->val[1], XRX200_PCE_TBL_VAL_1);
|
||
|
|
+ xrx200sw_write(tbl->val[0], XRX200_PCE_TBL_VAL_0);
|
||
|
|
+
|
||
|
|
+ // read the mask
|
||
|
|
+ xrx200sw_write(tbl->mask, XRX200_PCE_TBL_MASK_0);
|
||
|
|
+ // read the type
|
||
|
|
+ xrx200sw_write(tbl->type, XRX200_PCE_TBL_CTRL_TYPE);
|
||
|
|
+ // read the valid flag
|
||
|
|
+ xrx200sw_write(tbl->valid, XRX200_PCE_TBL_CTRL_VLD);
|
||
|
|
+ // read the group map
|
||
|
|
+ xrx200sw_write(tbl->gmap, XRX200_PCE_TBL_CTRL_GMAP);
|
||
|
|
+
|
||
|
|
+ xrx200sw_write(1, XRX200_PCE_TBL_CTRL_BAS); // start access
|
||
|
|
+
|
||
|
|
+ // wait until hardware is ready
|
||
|
|
+ while (xrx200sw_read(XRX200_PCE_TBL_CTRL_BAS)) {};
|
||
|
|
+
|
||
|
|
+ return 0;
|
||
|
|
+}
|
||
|
|
+
|
||
|
|
+static void xrx200sw_fixup_pvids(void)
|
||
|
|
+{
|
||
|
|
+ int index, p, portmap, untagged;
|
||
|
|
+ struct xrx200_pce_table_entry tem;
|
||
|
|
+ struct xrx200_pce_table_entry tev;
|
||
|
|
+
|
||
|
|
+ portmap = 0;
|
||
|
|
+ for (p = 0; p < XRX200_MAX_PORT; p++)
|
||
|
|
+ portmap |= BIT(p);
|
||
|
|
+
|
||
|
|
+ tem.table = XRX200_PCE_VLANMAP_IDX;
|
||
|
|
+ tev.table = XRX200_PCE_ACTVLAN_IDX;
|
||
|
|
+
|
||
|
|
+ for (index = XRX200_MAX_VLAN; index-- > 0;)
|
||
|
|
+ {
|
||
|
|
+ tev.index = index;
|
||
|
|
+ xrx200_pce_table_entry_read(&tev);
|
||
|
|
+
|
||
|
|
+ if (tev.valid == 0)
|
||
|
|
+ continue;
|
||
|
|
+
|
||
|
|
+ tem.index = index;
|
||
|
|
+ xrx200_pce_table_entry_read(&tem);
|
||
|
|
+
|
||
|
|
+ if (tem.val[0] == 0)
|
||
|
|
+ continue;
|
||
|
|
+
|
||
|
|
+ untagged = portmap & (tem.val[1] ^ tem.val[2]);
|
||
|
|
+
|
||
|
|
+ for (p = 0; p < XRX200_MAX_PORT; p++)
|
||
|
|
+ if (untagged & BIT(p))
|
||
|
|
+ {
|
||
|
|
+ portmap &= ~BIT(p);
|
||
|
|
+ xrx200sw_write_x(index, XRX200_PCE_DEFPVID_PVID, p);
|
||
|
|
+ }
|
||
|
|
+
|
||
|
|
+ for (p = 0; p < XRX200_MAX_PORT; p++)
|
||
|
|
+ if (portmap & BIT(p))
|
||
|
|
+ xrx200sw_write_x(index, XRX200_PCE_DEFPVID_PVID, p);
|
||
|
|
+ }
|
||
|
|
+}
|
||
|
|
+
|
||
|
|
+// swconfig interface
|
||
|
|
+static void xrx200_hw_init(struct xrx200_hw *hw);
|
||
|
|
+
|
||
|
|
+// global
|
||
|
|
+static int xrx200sw_reset_switch(struct switch_dev *dev)
|
||
|
|
+{
|
||
|
|
+ struct xrx200_hw *hw = container_of(dev, struct xrx200_hw, swdev);
|
||
|
|
+
|
||
|
|
+ xrx200_hw_init(hw);
|
||
|
|
+
|
||
|
|
+ return 0;
|
||
|
|
+}
|
||
|
|
+
|
||
|
|
+static int xrx200_set_vlan_mode_enable(struct switch_dev *dev, const struct switch_attr *attr, struct switch_val *val)
|
||
|
|
+{
|
||
|
|
+ int p;
|
||
|
|
+
|
||
|
|
+ if ((attr->max > 0) && (val->value.i > attr->max))
|
||
|
|
+ return -EINVAL;
|
||
|
|
+
|
||
|
|
+ for (p = 0; p < XRX200_MAX_PORT; p++) {
|
||
|
|
+ xrx200sw_write_x(val->value.i, XRX200_PCE_VCTRL_VEMR, p);
|
||
|
|
+ xrx200sw_write_x(val->value.i, XRX200_PCE_VCTRL_VIMR, p);
|
||
|
|
+ }
|
||
|
|
+
|
||
|
|
+ xrx200sw_write(val->value.i, XRX200_PCE_GCTRL_0_VLAN);
|
||
|
|
+ return 0;
|
||
|
|
+}
|
||
|
|
+
|
||
|
|
+static int xrx200_get_vlan_mode_enable(struct switch_dev *dev, const struct switch_attr *attr, struct switch_val *val)
|
||
|
|
+{
|
||
|
|
+ val->value.i = xrx200sw_read(attr->id);
|
||
|
|
+ return 0;
|
||
|
|
+}
|
||
|
|
+
|
||
|
|
+static int xrx200_set_global_attr(struct switch_dev *dev, const struct switch_attr *attr, struct switch_val *val)
|
||
|
|
+{
|
||
|
|
+ if ((attr->max > 0) && (val->value.i > attr->max))
|
||
|
|
+ return -EINVAL;
|
||
|
|
+
|
||
|
|
+ xrx200sw_write(val->value.i, attr->id);
|
||
|
|
+ return 0;
|
||
|
|
+}
|
||
|
|
+
|
||
|
|
+static int xrx200_get_global_attr(struct switch_dev *dev, const struct switch_attr *attr, struct switch_val *val)
|
||
|
|
+{
|
||
|
|
+ val->value.i = xrx200sw_read(attr->id);
|
||
|
|
+ return 0;
|
||
|
|
+}
|
||
|
|
+
|
||
|
|
+// vlan
|
||
|
|
+static int xrx200sw_set_vlan_vid(struct switch_dev *dev, const struct switch_attr *attr,
|
||
|
|
+ struct switch_val *val)
|
||
|
|
+{
|
||
|
|
+ int i;
|
||
|
|
+ struct xrx200_pce_table_entry tev;
|
||
|
|
+ struct xrx200_pce_table_entry tem;
|
||
|
|
+
|
||
|
|
+ tev.table = XRX200_PCE_ACTVLAN_IDX;
|
||
|
|
+
|
||
|
|
+ for (i = 0; i < XRX200_MAX_VLAN; i++)
|
||
|
|
+ {
|
||
|
|
+ tev.index = i;
|
||
|
|
+ xrx200_pce_table_entry_read(&tev);
|
||
|
|
+ if (tev.key[0] == val->value.i && i != val->port_vlan)
|
||
|
|
+ return -EINVAL;
|
||
|
|
+ }
|
||
|
|
+
|
||
|
|
+ tev.index = val->port_vlan;
|
||
|
|
+ xrx200_pce_table_entry_read(&tev);
|
||
|
|
+ tev.key[0] = val->value.i;
|
||
|
|
+ tev.valid = val->value.i > 0;
|
||
|
|
+ xrx200_pce_table_entry_write(&tev);
|
||
|
|
+
|
||
|
|
+ tem.table = XRX200_PCE_VLANMAP_IDX;
|
||
|
|
+ tem.index = val->port_vlan;
|
||
|
|
+ xrx200_pce_table_entry_read(&tem);
|
||
|
|
+ tem.val[0] = val->value.i;
|
||
|
|
+ xrx200_pce_table_entry_write(&tem);
|
||
|
|
+
|
||
|
|
+ xrx200sw_fixup_pvids();
|
||
|
|
+ return 0;
|
||
|
|
+}
|
||
|
|
+
|
||
|
|
+static int xrx200sw_get_vlan_vid(struct switch_dev *dev, const struct switch_attr *attr,
|
||
|
|
+ struct switch_val *val)
|
||
|
|
+{
|
||
|
|
+ struct xrx200_pce_table_entry te;
|
||
|
|
+
|
||
|
|
+ te.table = XRX200_PCE_ACTVLAN_IDX;
|
||
|
|
+ te.index = val->port_vlan;
|
||
|
|
+ xrx200_pce_table_entry_read(&te);
|
||
|
|
+ val->value.i = te.key[0];
|
||
|
|
+
|
||
|
|
+ return 0;
|
||
|
|
+}
|
||
|
|
+
|
||
|
|
+static int xrx200sw_set_vlan_ports(struct switch_dev *dev, struct switch_val *val)
|
||
|
|
+{
|
||
|
|
+ int i, portmap, tagmap, untagged;
|
||
|
|
+ struct xrx200_pce_table_entry tem;
|
||
|
|
+
|
||
|
|
+ portmap = 0;
|
||
|
|
+ tagmap = 0;
|
||
|
|
+ for (i = 0; i < val->len; i++)
|
||
|
|
+ {
|
||
|
|
+ struct switch_port *p = &val->value.ports[i];
|
||
|
|
+
|
||
|
|
+ portmap |= (1 << p->id);
|
||
|
|
+ if (p->flags & (1 << SWITCH_PORT_FLAG_TAGGED))
|
||
|
|
+ tagmap |= (1 << p->id);
|
||
|
|
+ }
|
||
|
|
+
|
||
|
|
+ tem.table = XRX200_PCE_VLANMAP_IDX;
|
||
|
|
+
|
||
|
|
+ untagged = portmap ^ tagmap;
|
||
|
|
+ for (i = 0; i < XRX200_MAX_VLAN; i++)
|
||
|
|
+ {
|
||
|
|
+ tem.index = i;
|
||
|
|
+ xrx200_pce_table_entry_read(&tem);
|
||
|
|
+
|
||
|
|
+ if (tem.val[0] == 0)
|
||
|
|
+ continue;
|
||
|
|
+
|
||
|
|
+ if ((untagged & (tem.val[1] ^ tem.val[2])) && (val->port_vlan != i))
|
||
|
|
+ return -EINVAL;
|
||
|
|
+ }
|
||
|
|
+
|
||
|
|
+ tem.index = val->port_vlan;
|
||
|
|
+ xrx200_pce_table_entry_read(&tem);
|
||
|
|
+
|
||
|
|
+ // auto-enable this vlan if not enabled already
|
||
|
|
+ if (tem.val[0] == 0)
|
||
|
|
+ {
|
||
|
|
+ struct switch_val v;
|
||
|
|
+ v.port_vlan = val->port_vlan;
|
||
|
|
+ v.value.i = val->port_vlan;
|
||
|
|
+ if(xrx200sw_set_vlan_vid(dev, NULL, &v))
|
||
|
|
+ return -EINVAL;
|
||
|
|
+
|
||
|
|
+ //read updated tem
|
||
|
|
+ tem.index = val->port_vlan;
|
||
|
|
+ xrx200_pce_table_entry_read(&tem);
|
||
|
|
+ }
|
||
|
|
+
|
||
|
|
+ tem.val[1] = portmap;
|
||
|
|
+ tem.val[2] = tagmap;
|
||
|
|
+ xrx200_pce_table_entry_write(&tem);
|
||
|
|
+
|
||
|
|
+ xrx200sw_fixup_pvids();
|
||
|
|
+
|
||
|
|
+ return 0;
|
||
|
|
+}
|
||
|
|
+
|
||
|
|
+static int xrx200sw_get_vlan_ports(struct switch_dev *dev, struct switch_val *val)
|
||
|
|
+{
|
||
|
|
+ int i;
|
||
|
|
+ unsigned short ports, tags;
|
||
|
|
+ struct xrx200_pce_table_entry tem;
|
||
|
|
+
|
||
|
|
+ tem.table = XRX200_PCE_VLANMAP_IDX;
|
||
|
|
+ tem.index = val->port_vlan;
|
||
|
|
+ xrx200_pce_table_entry_read(&tem);
|
||
|
|
+
|
||
|
|
+ ports = tem.val[1];
|
||
|
|
+ tags = tem.val[2];
|
||
|
|
+
|
||
|
|
+ for (i = 0; i < XRX200_MAX_PORT; i++) {
|
||
|
|
+ struct switch_port *p;
|
||
|
|
+
|
||
|
|
+ if (!(ports & (1 << i)))
|
||
|
|
+ continue;
|
||
|
|
+
|
||
|
|
+ p = &val->value.ports[val->len++];
|
||
|
|
+ p->id = i;
|
||
|
|
+ if (tags & (1 << i))
|
||
|
|
+ p->flags = (1 << SWITCH_PORT_FLAG_TAGGED);
|
||
|
|
+ else
|
||
|
|
+ p->flags = 0;
|
||
|
|
+ }
|
||
|
|
+
|
||
|
|
+ return 0;
|
||
|
|
+}
|
||
|
|
+
|
||
|
|
+static int xrx200sw_set_vlan_enable(struct switch_dev *dev, const struct switch_attr *attr,
|
||
|
|
+ struct switch_val *val)
|
||
|
|
+{
|
||
|
|
+ struct xrx200_pce_table_entry tev;
|
||
|
|
+
|
||
|
|
+ tev.table = XRX200_PCE_ACTVLAN_IDX;
|
||
|
|
+ tev.index = val->port_vlan;
|
||
|
|
+ xrx200_pce_table_entry_read(&tev);
|
||
|
|
+
|
||
|
|
+ if (tev.key[0] == 0)
|
||
|
|
+ return -EINVAL;
|
||
|
|
+
|
||
|
|
+ tev.valid = val->value.i;
|
||
|
|
+ xrx200_pce_table_entry_write(&tev);
|
||
|
|
+
|
||
|
|
+ xrx200sw_fixup_pvids();
|
||
|
|
+ return 0;
|
||
|
|
+}
|
||
|
|
+
|
||
|
|
+static int xrx200sw_get_vlan_enable(struct switch_dev *dev, const struct switch_attr *attr,
|
||
|
|
+ struct switch_val *val)
|
||
|
|
+{
|
||
|
|
+ struct xrx200_pce_table_entry tev;
|
||
|
|
+
|
||
|
|
+ tev.table = XRX200_PCE_ACTVLAN_IDX;
|
||
|
|
+ tev.index = val->port_vlan;
|
||
|
|
+ xrx200_pce_table_entry_read(&tev);
|
||
|
|
+ val->value.i = tev.valid;
|
||
|
|
+
|
||
|
|
+ return 0;
|
||
|
|
+}
|
||
|
|
+
|
||
|
|
+// port
|
||
|
|
+static int xrx200sw_get_port_pvid(struct switch_dev *dev, int port, int *val)
|
||
|
|
+{
|
||
|
|
+ struct xrx200_pce_table_entry tev;
|
||
|
|
+
|
||
|
|
+ if (port >= XRX200_MAX_PORT)
|
||
|
|
+ return -EINVAL;
|
||
|
|
+
|
||
|
|
+ tev.table = XRX200_PCE_ACTVLAN_IDX;
|
||
|
|
+ tev.index = xrx200sw_read_x(XRX200_PCE_DEFPVID_PVID, port);
|
||
|
|
+ xrx200_pce_table_entry_read(&tev);
|
||
|
|
+
|
||
|
|
+ *val = tev.key[0];
|
||
|
|
+ return 0;
|
||
|
|
+}
|
||
|
|
+
|
||
|
|
+static int xrx200sw_get_port_link(struct switch_dev *dev,
|
||
|
|
+ int port,
|
||
|
|
+ struct switch_port_link *link)
|
||
|
|
+{
|
||
|
|
+ if (port >= XRX200_MAX_PORT)
|
||
|
|
+ return -EINVAL;
|
||
|
|
+
|
||
|
|
+ link->link = xrx200sw_read_x(XRX200_MAC_PSTAT_LSTAT, port);
|
||
|
|
+ if (!link->link)
|
||
|
|
+ return 0;
|
||
|
|
+
|
||
|
|
+ link->duplex = xrx200sw_read_x(XRX200_MAC_PSTAT_FDUP, port);
|
||
|
|
+
|
||
|
|
+ link->rx_flow = !!(xrx200sw_read_x(XRX200_MAC_CTRL_0_FCON, port) && 0x0010);
|
||
|
|
+ link->tx_flow = !!(xrx200sw_read_x(XRX200_MAC_CTRL_0_FCON, port) && 0x0020);
|
||
|
|
+ link->aneg = !(xrx200sw_read_x(XRX200_MAC_CTRL_0_FCON, port));
|
||
|
|
+
|
||
|
|
+ link->speed = SWITCH_PORT_SPEED_10;
|
||
|
|
+ if (xrx200sw_read_x(XRX200_MAC_PSTAT_MBIT, port))
|
||
|
|
+ link->speed = SWITCH_PORT_SPEED_100;
|
||
|
|
+ if (xrx200sw_read_x(XRX200_MAC_PSTAT_GBIT, port))
|
||
|
|
+ link->speed = SWITCH_PORT_SPEED_1000;
|
||
|
|
+
|
||
|
|
+ return 0;
|
||
|
|
+}
|
||
|
|
+
|
||
|
|
+static int xrx200_set_port_attr(struct switch_dev *dev, const struct switch_attr *attr, struct switch_val *val)
|
||
|
|
+{
|
||
|
|
+ printk("%s %s(%d)\n", __FILE__, __func__, __LINE__);
|
||
|
|
+ if (val->port_vlan >= XRX200_MAX_PORT)
|
||
|
|
+ return -EINVAL;
|
||
|
|
+
|
||
|
|
+ if ((attr->max > 0) && (val->value.i > attr->max))
|
||
|
|
+ return -EINVAL;
|
||
|
|
+
|
||
|
|
+ xrx200sw_write_x(val->value.i, attr->id, val->port_vlan);
|
||
|
|
+ return 0;
|
||
|
|
+}
|
||
|
|
+
|
||
|
|
+static int xrx200_get_port_attr(struct switch_dev *dev, const struct switch_attr *attr, struct switch_val *val)
|
||
|
|
+{
|
||
|
|
+ if (val->port_vlan >= XRX200_MAX_PORT)
|
||
|
|
+ return -EINVAL;
|
||
|
|
+
|
||
|
|
+ val->value.i = xrx200sw_read_x(attr->id, val->port_vlan);
|
||
|
|
+ return 0;
|
||
|
|
+}
|
||
|
|
+
|
||
|
|
+// attributes
|
||
|
|
+static struct switch_attr xrx200sw_globals[] = {
|
||
|
|
+ {
|
||
|
|
+ .type = SWITCH_TYPE_INT,
|
||
|
|
+ .set = xrx200_set_vlan_mode_enable,
|
||
|
|
+ .get = xrx200_get_vlan_mode_enable,
|
||
|
|
+ .name = "enable_vlan",
|
||
|
|
+ .description = "Enable VLAN mode",
|
||
|
|
+ .max = 1},
|
||
|
|
+};
|
||
|
|
+
|
||
|
|
+static struct switch_attr xrx200sw_port[] = {
|
||
|
|
+ {
|
||
|
|
+ XRX200_PORT_REGATTR(XRX200_PCE_VCTRL_UVR),
|
||
|
|
+ .name = "uvr",
|
||
|
|
+ .description = "Unknown VLAN Rule",
|
||
|
|
+ .max = 1,
|
||
|
|
+ },
|
||
|
|
+ {
|
||
|
|
+ XRX200_PORT_REGATTR(XRX200_PCE_VCTRL_VSR),
|
||
|
|
+ .name = "vsr",
|
||
|
|
+ .description = "VLAN Security Rule",
|
||
|
|
+ .max = 1,
|
||
|
|
+ },
|
||
|
|
+ {
|
||
|
|
+ XRX200_PORT_REGATTR(XRX200_PCE_VCTRL_VINR),
|
||
|
|
+ .name = "vinr",
|
||
|
|
+ .description = "VLAN Ingress Tag Rule",
|
||
|
|
+ .max = 2,
|
||
|
|
+ },
|
||
|
|
+ {
|
||
|
|
+ XRX200_PORT_REGATTR(XRX200_PCE_PCTRL_0_TVM),
|
||
|
|
+ .name = "tvm",
|
||
|
|
+ .description = "Transparent VLAN Mode",
|
||
|
|
+ .max = 1,
|
||
|
|
+ },
|
||
|
|
+};
|
||
|
|
+
|
||
|
|
+static struct switch_attr xrx200sw_vlan[] = {
|
||
|
|
+ {
|
||
|
|
+ .type = SWITCH_TYPE_INT,
|
||
|
|
+ .name = "vid",
|
||
|
|
+ .description = "VLAN ID (0-4094)",
|
||
|
|
+ .set = xrx200sw_set_vlan_vid,
|
||
|
|
+ .get = xrx200sw_get_vlan_vid,
|
||
|
|
+ .max = 4094,
|
||
|
|
+ },
|
||
|
|
+ {
|
||
|
|
+ .type = SWITCH_TYPE_INT,
|
||
|
|
+ .name = "enable",
|
||
|
|
+ .description = "Enable VLAN",
|
||
|
|
+ .set = xrx200sw_set_vlan_enable,
|
||
|
|
+ .get = xrx200sw_get_vlan_enable,
|
||
|
|
+ .max = 1,
|
||
|
|
+ },
|
||
|
|
+};
|
||
|
|
+
|
||
|
|
+static const struct switch_dev_ops xrx200sw_ops = {
|
||
|
|
+ .attr_global = {
|
||
|
|
+ .attr = xrx200sw_globals,
|
||
|
|
+ .n_attr = ARRAY_SIZE(xrx200sw_globals),
|
||
|
|
+ },
|
||
|
|
+ .attr_port = {
|
||
|
|
+ .attr = xrx200sw_port,
|
||
|
|
+ .n_attr = ARRAY_SIZE(xrx200sw_port),
|
||
|
|
+ },
|
||
|
|
+ .attr_vlan = {
|
||
|
|
+ .attr = xrx200sw_vlan,
|
||
|
|
+ .n_attr = ARRAY_SIZE(xrx200sw_vlan),
|
||
|
|
+ },
|
||
|
|
+ .get_vlan_ports = xrx200sw_get_vlan_ports,
|
||
|
|
+ .set_vlan_ports = xrx200sw_set_vlan_ports,
|
||
|
|
+ .get_port_pvid = xrx200sw_get_port_pvid,
|
||
|
|
+ .reset_switch = xrx200sw_reset_switch,
|
||
|
|
+ .get_port_link = xrx200sw_get_port_link,
|
||
|
|
+// .get_port_stats = xrx200sw_get_port_stats, //TODO
|
||
|
|
+};
|
||
|
|
+
|
||
|
|
+static int xrx200sw_init(struct xrx200_hw *hw)
|
||
|
|
+{
|
||
|
|
+ int netdev_num;
|
||
|
|
+
|
||
|
|
+ for (netdev_num = 0; netdev_num < hw->num_devs; netdev_num++)
|
||
|
|
+ {
|
||
|
|
+ struct switch_dev *swdev;
|
||
|
|
+ struct net_device *dev = hw->devs[netdev_num];
|
||
|
|
+ struct xrx200_priv *priv = netdev_priv(dev);
|
||
|
|
+ if (!priv->sw)
|
||
|
|
+ continue;
|
||
|
|
+
|
||
|
|
+ swdev = &hw->swdev;
|
||
|
|
+
|
||
|
|
+ swdev->name = "Lantiq XRX200 Switch";
|
||
|
|
+ swdev->vlans = XRX200_MAX_VLAN;
|
||
|
|
+ swdev->ports = XRX200_MAX_PORT;
|
||
|
|
+ swdev->cpu_port = 6;
|
||
|
|
+ swdev->ops = &xrx200sw_ops;
|
||
|
|
+
|
||
|
|
+ register_switch(swdev, dev);
|
||
|
|
+ return 0; // enough switches
|
||
|
|
+ }
|
||
|
|
+ return 0;
|
||
|
|
+}
|
||
|
|
+
|
||
|
|
static int xrx200_open(struct net_device *dev)
|
||
|
|
{
|
||
|
|
struct xrx200_priv *priv = netdev_priv(dev);
|
||
|
|
@@ -346,7 +933,7 @@ static void xrx200_hw_receive(struct xrx
|
||
|
|
struct xrx200_priv *priv = netdev_priv(dev);
|
||
|
|
struct ltq_dma_desc *desc = &ch->dma.desc_base[ch->dma.desc];
|
||
|
|
struct sk_buff *skb = ch->skb[ch->dma.desc];
|
||
|
|
- int len = (desc->ctl & LTQ_DMA_SIZE_MASK) - XRX200_DMA_CRC_LEN;
|
||
|
|
+ int len = (desc->ctl & LTQ_DMA_SIZE_MASK);
|
||
|
|
unsigned long flags;
|
||
|
|
|
||
|
|
spin_lock_irqsave(&priv->hw->lock, flags);
|
||
|
|
@@ -924,9 +1511,9 @@ static void xrx200_hw_init(struct xrx200
|
||
|
|
PMAC_HD_CTL);
|
||
|
|
#endif
|
||
|
|
|
||
|
|
- /* enable port fetch/store dma */
|
||
|
|
+ /* enable port fetch/store dma & VLAN Modification */
|
||
|
|
for (i = 0; i < 7; i++ ) {
|
||
|
|
- ltq_switch_w32_mask(0, 0x01, FDMA_PCTRLx(i));
|
||
|
|
+ ltq_switch_w32_mask(0, 0x19, FDMA_PCTRLx(i));
|
||
|
|
ltq_switch_w32_mask(0, 0x01, SDMA_PCTRLx(i));
|
||
|
|
ltq_switch_w32_mask(0, PCE_INGRESS, PCE_PCTRL_REG(i, 0));
|
||
|
|
}
|
||
|
|
@@ -1042,6 +1629,7 @@ static void xrx200_of_iface(struct xrx20
|
||
|
|
struct xrx200_priv *priv;
|
||
|
|
struct device_node *port;
|
||
|
|
const __be32 *wan;
|
||
|
|
+ const __be32 *sw;
|
||
|
|
|
||
|
|
/* alloc the network device */
|
||
|
|
hw->devs[hw->num_devs] = alloc_etherdev(sizeof(struct xrx200_priv));
|
||
|
|
@@ -1065,6 +1653,11 @@ static void xrx200_of_iface(struct xrx20
|
||
|
|
if (wan && (*wan == 1))
|
||
|
|
priv->wan = 1;
|
||
|
|
|
||
|
|
+ /* should the switch be enabled on this interface ? */
|
||
|
|
+ sw = of_get_property(iface, "lantiq,switch", NULL);
|
||
|
|
+ if (sw && (*sw == 1))
|
||
|
|
+ priv->sw = 1;
|
||
|
|
+
|
||
|
|
/* load the ports that are part of the interface */
|
||
|
|
for_each_child_of_node(iface, port)
|
||
|
|
if (of_device_is_compatible(port, "lantiq,xrx200-pdi-port"))
|
||
|
|
@@ -1138,6 +1731,8 @@ static int xrx200_probe(struct platform_
|
||
|
|
return -ENOENT;
|
||
|
|
}
|
||
|
|
|
||
|
|
+ xrx200sw_init(&xrx200_hw);
|
||
|
|
+
|
||
|
|
/* set wan port mask */
|
||
|
|
ltq_pmac_w32(xrx200_hw.wan_map, PMAC_EWAN);
|
||
|
|
|
||
|
|
--- /dev/null
|
||
|
|
+++ b/drivers/net/ethernet/lantiq_xrx200_sw.h
|
||
|
|
@@ -0,0 +1,1328 @@
|
||
|
|
+/*
|
||
|
|
+ * This program is free software; you can redistribute it and/or modify it
|
||
|
|
+ * under the terms of the GNU General Public License version 2 as published
|
||
|
|
+ * by the Free Software Foundation.
|
||
|
|
+ *
|
||
|
|
+ * This program is distributed in the hope that it will be useful,
|
||
|
|
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||
|
|
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||
|
|
+ * GNU General Public License for more details.
|
||
|
|
+ *
|
||
|
|
+ * You should have received a copy of the GNU General Public License
|
||
|
|
+ * along with this program; if not, write to the Free Software
|
||
|
|
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA.
|
||
|
|
+ *
|
||
|
|
+ * Copyright (C) 2010 Lantiq Deutschland GmbH
|
||
|
|
+ * Copyright (C) 2013 Antonios Vamporakis <vamporakis@yahoo.com>
|
||
|
|
+ *
|
||
|
|
+ * VR9 switch registers extracted from 310TUJ0 switch api
|
||
|
|
+ * WARNING mult values of 0x00 may not be correct
|
||
|
|
+ *
|
||
|
|
+ */
|
||
|
|
+
|
||
|
|
+enum {
|
||
|
|
+// XRX200_ETHSW_SWRES, /* Ethernet Switch ResetControl Register */
|
||
|
|
+// XRX200_ETHSW_SWRES_R1, /* Hardware Reset */
|
||
|
|
+// XRX200_ETHSW_SWRES_R0, /* Register Configuration */
|
||
|
|
+// XRX200_ETHSW_CLK_MAC_GAT, /* Ethernet Switch Clock ControlRegister */
|
||
|
|
+// XRX200_ETHSW_CLK_EXP_SLEEP, /* Exponent to put system into sleep */
|
||
|
|
+// XRX200_ETHSW_CLK_EXP_WAKE, /* Exponent to wake up system */
|
||
|
|
+// XRX200_ETHSW_CLK_CLK2_EN, /* CLK2 Input for MAC */
|
||
|
|
+// XRX200_ETHSW_CLK_EXT_DIV_EN, /* External Clock Divider Enable */
|
||
|
|
+// XRX200_ETHSW_CLK_RAM_DBG_EN, /* Clock Gating Enable */
|
||
|
|
+// XRX200_ETHSW_CLK_REG_GAT_EN, /* Clock Gating Enable */
|
||
|
|
+// XRX200_ETHSW_CLK_GAT_EN, /* Clock Gating Enable */
|
||
|
|
+// XRX200_ETHSW_CLK_MAC_GAT_EN, /* Clock Gating Enable */
|
||
|
|
+// XRX200_ETHSW_DBG_STEP, /* Ethernet Switch Debug ControlRegister */
|
||
|
|
+// XRX200_ETHSW_DBG_CLK_SEL, /* Trigger Enable */
|
||
|
|
+// XRX200_ETHSW_DBG_MON_EN, /* Monitoring Enable */
|
||
|
|
+// XRX200_ETHSW_DBG_TRIG_EN, /* Trigger Enable */
|
||
|
|
+// XRX200_ETHSW_DBG_MODE, /* Debug Mode */
|
||
|
|
+// XRX200_ETHSW_DBG_STEP_TIME, /* Clock Step Size */
|
||
|
|
+// XRX200_ETHSW_SSB_MODE, /* Ethernet Switch SharedSegment Buffer Mode Register */
|
||
|
|
+// XRX200_ETHSW_SSB_MODE_ADDE, /* Memory Address */
|
||
|
|
+// XRX200_ETHSW_SSB_MODE_MODE, /* Memory Access Mode */
|
||
|
|
+// XRX200_ETHSW_SSB_ADDR, /* Ethernet Switch SharedSegment Buffer Address Register */
|
||
|
|
+// XRX200_ETHSW_SSB_ADDR_ADDE, /* Memory Address */
|
||
|
|
+// XRX200_ETHSW_SSB_DATA, /* Ethernet Switch SharedSegment Buffer Data Register */
|
||
|
|
+// XRX200_ETHSW_SSB_DATA_DATA, /* Data Value */
|
||
|
|
+// XRX200_ETHSW_CAP_0, /* Ethernet Switch CapabilityRegister 0 */
|
||
|
|
+// XRX200_ETHSW_CAP_0_SPEED, /* Clock frequency */
|
||
|
|
+// XRX200_ETHSW_CAP_1, /* Ethernet Switch CapabilityRegister 1 */
|
||
|
|
+// XRX200_ETHSW_CAP_1_GMAC, /* MAC operation mode */
|
||
|
|
+// XRX200_ETHSW_CAP_1_QUEUE, /* Number of queues */
|
||
|
|
+// XRX200_ETHSW_CAP_1_VPORTS, /* Number of virtual ports */
|
||
|
|
+// XRX200_ETHSW_CAP_1_PPORTS, /* Number of physical ports */
|
||
|
|
+// XRX200_ETHSW_CAP_2, /* Ethernet Switch CapabilityRegister 2 */
|
||
|
|
+// XRX200_ETHSW_CAP_2_PACKETS, /* Number of packets */
|
||
|
|
+// XRX200_ETHSW_CAP_3, /* Ethernet Switch CapabilityRegister 3 */
|
||
|
|
+// XRX200_ETHSW_CAP_3_METERS, /* Number of traffic meters */
|
||
|
|
+// XRX200_ETHSW_CAP_3_SHAPERS, /* Number of traffic shapers */
|
||
|
|
+// XRX200_ETHSW_CAP_4, /* Ethernet Switch CapabilityRegister 4 */
|
||
|
|
+// XRX200_ETHSW_CAP_4_PPPOE, /* PPPoE table size */
|
||
|
|
+// XRX200_ETHSW_CAP_4_VLAN, /* Active VLAN table size */
|
||
|
|
+// XRX200_ETHSW_CAP_5, /* Ethernet Switch CapabilityRegister 5 */
|
||
|
|
+// XRX200_ETHSW_CAP_5_IPPLEN, /* IP packet length table size */
|
||
|
|
+// XRX200_ETHSW_CAP_5_PROT, /* Protocol table size */
|
||
|
|
+// XRX200_ETHSW_CAP_6, /* Ethernet Switch CapabilityRegister 6 */
|
||
|
|
+// XRX200_ETHSW_CAP_6_MACDASA, /* MAC DA/SA table size */
|
||
|
|
+// XRX200_ETHSW_CAP_6_APPL, /* Application table size */
|
||
|
|
+// XRX200_ETHSW_CAP_7, /* Ethernet Switch CapabilityRegister 7 */
|
||
|
|
+// XRX200_ETHSW_CAP_7_IPDASAM, /* IP DA/SA MSB table size */
|
||
|
|
+// XRX200_ETHSW_CAP_7_IPDASAL, /* IP DA/SA LSB table size */
|
||
|
|
+// XRX200_ETHSW_CAP_8, /* Ethernet Switch CapabilityRegister 8 */
|
||
|
|
+// XRX200_ETHSW_CAP_8_MCAST, /* Multicast table size */
|
||
|
|
+// XRX200_ETHSW_CAP_9, /* Ethernet Switch CapabilityRegister 9 */
|
||
|
|
+// XRX200_ETHSW_CAP_9_FLAGG, /* Flow Aggregation table size */
|
||
|
|
+// XRX200_ETHSW_CAP_10, /* Ethernet Switch CapabilityRegister 10 */
|
||
|
|
+// XRX200_ETHSW_CAP_10_MACBT, /* MAC bridging table size */
|
||
|
|
+// XRX200_ETHSW_CAP_11, /* Ethernet Switch CapabilityRegister 11 */
|
||
|
|
+// XRX200_ETHSW_CAP_11_BSIZEL, /* Packet buffer size (lower part, in byte) */
|
||
|
|
+// XRX200_ETHSW_CAP_12, /* Ethernet Switch CapabilityRegister 12 */
|
||
|
|
+// XRX200_ETHSW_CAP_12_BSIZEH, /* Packet buffer size (higher part, in byte) */
|
||
|
|
+// XRX200_ETHSW_VERSION_REV, /* Ethernet Switch VersionRegister */
|
||
|
|
+// XRX200_ETHSW_VERSION_MOD_ID, /* Module Identification */
|
||
|
|
+// XRX200_ETHSW_VERSION_REV_ID, /* Hardware Revision Identification */
|
||
|
|
+// XRX200_ETHSW_IER, /* Interrupt Enable Register */
|
||
|
|
+// XRX200_ETHSW_IER_FDMAIE, /* Fetch DMA Interrupt Enable */
|
||
|
|
+// XRX200_ETHSW_IER_SDMAIE, /* Store DMA Interrupt Enable */
|
||
|
|
+// XRX200_ETHSW_IER_MACIE, /* Ethernet MAC Interrupt Enable */
|
||
|
|
+// XRX200_ETHSW_IER_PCEIE, /* Parser and Classification Engine Interrupt Enable */
|
||
|
|
+// XRX200_ETHSW_IER_BMIE, /* Buffer Manager Interrupt Enable */
|
||
|
|
+// XRX200_ETHSW_ISR, /* Interrupt Status Register */
|
||
|
|
+// XRX200_ETHSW_ISR_FDMAINT, /* Fetch DMA Interrupt */
|
||
|
|
+// XRX200_ETHSW_ISR_SDMAINT, /* Store DMA Interrupt */
|
||
|
|
+// XRX200_ETHSW_ISR_MACINT, /* Ethernet MAC Interrupt */
|
||
|
|
+// XRX200_ETHSW_ISR_PCEINT, /* Parser and Classification Engine Interrupt */
|
||
|
|
+// XRX200_ETHSW_ISR_BMINT, /* Buffer Manager Interrupt */
|
||
|
|
+// XRX200_ETHSW_SPARE_0, /* Ethernet Switch SpareCells 0 */
|
||
|
|
+// XRX200_ETHSW_SPARE_0_SPARE, /* SPARE0 */
|
||
|
|
+// XRX200_ETHSW_SPARE_1, /* Ethernet Switch SpareCells 1 */
|
||
|
|
+// XRX200_ETHSW_SPARE_1_SPARE, /* SPARE1 */
|
||
|
|
+// XRX200_ETHSW_SPARE_2, /* Ethernet Switch SpareCells 2 */
|
||
|
|
+// XRX200_ETHSW_SPARE_2_SPARE, /* SPARE2 */
|
||
|
|
+// XRX200_ETHSW_SPARE_3, /* Ethernet Switch SpareCells 3 */
|
||
|
|
+// XRX200_ETHSW_SPARE_3_SPARE, /* SPARE3 */
|
||
|
|
+// XRX200_ETHSW_SPARE_4, /* Ethernet Switch SpareCells 4 */
|
||
|
|
+// XRX200_ETHSW_SPARE_4_SPARE, /* SPARE4 */
|
||
|
|
+// XRX200_ETHSW_SPARE_5, /* Ethernet Switch SpareCells 5 */
|
||
|
|
+// XRX200_ETHSW_SPARE_5_SPARE, /* SPARE5 */
|
||
|
|
+// XRX200_ETHSW_SPARE_6, /* Ethernet Switch SpareCells 6 */
|
||
|
|
+// XRX200_ETHSW_SPARE_6_SPARE, /* SPARE6 */
|
||
|
|
+// XRX200_ETHSW_SPARE_7, /* Ethernet Switch SpareCells 7 */
|
||
|
|
+// XRX200_ETHSW_SPARE_7_SPARE, /* SPARE7 */
|
||
|
|
+// XRX200_ETHSW_SPARE_8, /* Ethernet Switch SpareCells 8 */
|
||
|
|
+// XRX200_ETHSW_SPARE_8_SPARE, /* SPARE8 */
|
||
|
|
+// XRX200_ETHSW_SPARE_9, /* Ethernet Switch SpareCells 9 */
|
||
|
|
+// XRX200_ETHSW_SPARE_9_SPARE, /* SPARE9 */
|
||
|
|
+// XRX200_ETHSW_SPARE_10, /* Ethernet Switch SpareCells 10 */
|
||
|
|
+// XRX200_ETHSW_SPARE_10_SPARE, /* SPARE10 */
|
||
|
|
+// XRX200_ETHSW_SPARE_11, /* Ethernet Switch SpareCells 11 */
|
||
|
|
+// XRX200_ETHSW_SPARE_11_SPARE, /* SPARE11 */
|
||
|
|
+// XRX200_ETHSW_SPARE_12, /* Ethernet Switch SpareCells 12 */
|
||
|
|
+// XRX200_ETHSW_SPARE_12_SPARE, /* SPARE12 */
|
||
|
|
+// XRX200_ETHSW_SPARE_13, /* Ethernet Switch SpareCells 13 */
|
||
|
|
+// XRX200_ETHSW_SPARE_13_SPARE, /* SPARE13 */
|
||
|
|
+// XRX200_ETHSW_SPARE_14, /* Ethernet Switch SpareCells 14 */
|
||
|
|
+// XRX200_ETHSW_SPARE_14_SPARE, /* SPARE14 */
|
||
|
|
+// XRX200_ETHSW_SPARE_15, /* Ethernet Switch SpareCells 15 */
|
||
|
|
+// XRX200_ETHSW_SPARE_15_SPARE, /* SPARE15 */
|
||
|
|
+// XRX200_BM_RAM_VAL_3, /* RAM Value Register 3 */
|
||
|
|
+// XRX200_BM_RAM_VAL_3_VAL3, /* Data value [15:0] */
|
||
|
|
+// XRX200_BM_RAM_VAL_2, /* RAM Value Register 2 */
|
||
|
|
+// XRX200_BM_RAM_VAL_2_VAL2, /* Data value [15:0] */
|
||
|
|
+// XRX200_BM_RAM_VAL_1, /* RAM Value Register 1 */
|
||
|
|
+// XRX200_BM_RAM_VAL_1_VAL1, /* Data value [15:0] */
|
||
|
|
+// XRX200_BM_RAM_VAL_0, /* RAM Value Register 0 */
|
||
|
|
+// XRX200_BM_RAM_VAL_0_VAL0, /* Data value [15:0] */
|
||
|
|
+// XRX200_BM_RAM_ADDR, /* RAM Address Register */
|
||
|
|
+// XRX200_BM_RAM_ADDR_ADDR, /* RAM Address */
|
||
|
|
+// XRX200_BM_RAM_CTRL, /* RAM Access Control Register */
|
||
|
|
+// XRX200_BM_RAM_CTRL_BAS, /* Access Busy/Access Start */
|
||
|
|
+// XRX200_BM_RAM_CTRL_OPMOD, /* Lookup Table Access Operation Mode */
|
||
|
|
+// XRX200_BM_RAM_CTRL_ADDR, /* Address for RAM selection */
|
||
|
|
+// XRX200_BM_FSQM_GCTRL, /* Free Segment Queue ManagerGlobal Control Register */
|
||
|
|
+// XRX200_BM_FSQM_GCTRL_SEGNUM, /* Maximum Segment Number */
|
||
|
|
+// XRX200_BM_CONS_SEG, /* Number of Consumed SegmentsRegister */
|
||
|
|
+// XRX200_BM_CONS_SEG_FSEG, /* Number of Consumed Segments */
|
||
|
|
+// XRX200_BM_CONS_PKT, /* Number of Consumed PacketPointers Register */
|
||
|
|
+// XRX200_BM_CONS_PKT_FQP, /* Number of Consumed Packet Pointers */
|
||
|
|
+// XRX200_BM_GCTRL_F, /* Buffer Manager Global ControlRegister 0 */
|
||
|
|
+// XRX200_BM_GCTRL_BM_STA, /* Buffer Manager Initialization Status Bit */
|
||
|
|
+// XRX200_BM_GCTRL_SAT, /* RMON Counter Update Mode */
|
||
|
|
+// XRX200_BM_GCTRL_FR_RBC, /* Freeze RMON RX Bad Byte 64 Bit Counter */
|
||
|
|
+// XRX200_BM_GCTRL_FR_RGC, /* Freeze RMON RX Good Byte 64 Bit Counter */
|
||
|
|
+// XRX200_BM_GCTRL_FR_TGC, /* Freeze RMON TX Good Byte 64 Bit Counter */
|
||
|
|
+// XRX200_BM_GCTRL_I_FIN, /* RAM initialization finished */
|
||
|
|
+// XRX200_BM_GCTRL_CX_INI, /* PQM Context RAM initialization */
|
||
|
|
+// XRX200_BM_GCTRL_FP_INI, /* FPQM RAM initialization */
|
||
|
|
+// XRX200_BM_GCTRL_FS_INI, /* FSQM RAM initialization */
|
||
|
|
+// XRX200_BM_GCTRL_R_SRES, /* Software Reset for RMON */
|
||
|
|
+// XRX200_BM_GCTRL_S_SRES, /* Software Reset for Scheduler */
|
||
|
|
+// XRX200_BM_GCTRL_A_SRES, /* Software Reset for AVG */
|
||
|
|
+// XRX200_BM_GCTRL_P_SRES, /* Software Reset for PQM */
|
||
|
|
+// XRX200_BM_GCTRL_F_SRES, /* Software Reset for FSQM */
|
||
|
|
+// XRX200_BM_QUEUE_GCTRL, /* Queue Manager GlobalControl Register 0 */
|
||
|
|
+// XRX200_BM_QUEUE_GCTRL_GL_MOD, /* WRED Mode Signal */
|
||
|
|
+// XRX200_BM_QUEUE_GCTRL_AQUI, /* Average Queue Update Interval */
|
||
|
|
+// XRX200_BM_QUEUE_GCTRL_AQWF, /* Average Queue Weight Factor */
|
||
|
|
+// XRX200_BM_QUEUE_GCTRL_QAVGEN, /* Queue Average Calculation Enable */
|
||
|
|
+// XRX200_BM_QUEUE_GCTRL_DPROB, /* Drop Probability Profile */
|
||
|
|
+// XRX200_BM_WRED_RTH_0, /* WRED Red Threshold Register0 */
|
||
|
|
+// XRX200_BM_WRED_RTH_0_MINTH, /* Minimum Threshold */
|
||
|
|
+// XRX200_BM_WRED_RTH_1, /* WRED Red Threshold Register1 */
|
||
|
|
+// XRX200_BM_WRED_RTH_1_MAXTH, /* Maximum Threshold */
|
||
|
|
+// XRX200_BM_WRED_YTH_0, /* WRED Yellow ThresholdRegister 0 */
|
||
|
|
+// XRX200_BM_WRED_YTH_0_MINTH, /* Minimum Threshold */
|
||
|
|
+// XRX200_BM_WRED_YTH_1, /* WRED Yellow ThresholdRegister 1 */
|
||
|
|
+// XRX200_BM_WRED_YTH_1_MAXTH, /* Maximum Threshold */
|
||
|
|
+// XRX200_BM_WRED_GTH_0, /* WRED Green ThresholdRegister 0 */
|
||
|
|
+// XRX200_BM_WRED_GTH_0_MINTH, /* Minimum Threshold */
|
||
|
|
+// XRX200_BM_WRED_GTH_1, /* WRED Green ThresholdRegister 1 */
|
||
|
|
+// XRX200_BM_WRED_GTH_1_MAXTH, /* Maximum Threshold */
|
||
|
|
+// XRX200_BM_DROP_GTH_0_THR, /* Drop Threshold ConfigurationRegister 0 */
|
||
|
|
+// XRX200_BM_DROP_GTH_0_THR_FQ, /* Threshold for frames marked red */
|
||
|
|
+// XRX200_BM_DROP_GTH_1_THY, /* Drop Threshold ConfigurationRegister 1 */
|
||
|
|
+// XRX200_BM_DROP_GTH_1_THY_FQ, /* Threshold for frames marked yellow */
|
||
|
|
+// XRX200_BM_DROP_GTH_2_THG, /* Drop Threshold ConfigurationRegister 2 */
|
||
|
|
+// XRX200_BM_DROP_GTH_2_THG_FQ, /* Threshold for frames marked green */
|
||
|
|
+// XRX200_BM_IER, /* Buffer Manager Global InterruptEnable Register */
|
||
|
|
+// XRX200_BM_IER_CNT4, /* Counter Group 4 (RMON-CLASSIFICATION) Interrupt Enable */
|
||
|
|
+// XRX200_BM_IER_CNT3, /* Counter Group 3 (RMON-PQM) Interrupt Enable */
|
||
|
|
+// XRX200_BM_IER_CNT2, /* Counter Group 2 (RMON-SCHEDULER) Interrupt Enable */
|
||
|
|
+// XRX200_BM_IER_CNT1, /* Counter Group 1 (RMON-QFETCH) Interrupt Enable */
|
||
|
|
+// XRX200_BM_IER_CNT0, /* Counter Group 0 (RMON-QSTOR) Interrupt Enable */
|
||
|
|
+// XRX200_BM_IER_DEQ, /* PQM dequeue Interrupt Enable */
|
||
|
|
+// XRX200_BM_IER_ENQ, /* PQM Enqueue Interrupt Enable */
|
||
|
|
+// XRX200_BM_IER_FSQM, /* Buffer Empty Interrupt Enable */
|
||
|
|
+// XRX200_BM_ISR, /* Buffer Manager Global InterruptStatus Register */
|
||
|
|
+// XRX200_BM_ISR_CNT4, /* Counter Group 4 Interrupt */
|
||
|
|
+// XRX200_BM_ISR_CNT3, /* Counter Group 3 Interrupt */
|
||
|
|
+// XRX200_BM_ISR_CNT2, /* Counter Group 2 Interrupt */
|
||
|
|
+// XRX200_BM_ISR_CNT1, /* Counter Group 1 Interrupt */
|
||
|
|
+// XRX200_BM_ISR_CNT0, /* Counter Group 0 Interrupt */
|
||
|
|
+// XRX200_BM_ISR_DEQ, /* PQM dequeue Interrupt Enable */
|
||
|
|
+// XRX200_BM_ISR_ENQ, /* PQM Enqueue Interrupt */
|
||
|
|
+// XRX200_BM_ISR_FSQM, /* Buffer Empty Interrupt */
|
||
|
|
+// XRX200_BM_CISEL, /* Buffer Manager RMON CounterInterrupt Select Register */
|
||
|
|
+// XRX200_BM_CISEL_PORT, /* Port Number */
|
||
|
|
+// XRX200_BM_DEBUG_CTRL_DBG, /* Debug Control Register */
|
||
|
|
+// XRX200_BM_DEBUG_CTRL_DBG_SEL, /* Select Signal for Debug Multiplexer */
|
||
|
|
+// XRX200_BM_DEBUG_VAL_DBG, /* Debug Value Register */
|
||
|
|
+// XRX200_BM_DEBUG_VAL_DBG_DAT, /* Debug Data Value */
|
||
|
|
+// XRX200_BM_PCFG, /* Buffer Manager PortConfiguration Register */
|
||
|
|
+// XRX200_BM_PCFG_CNTEN, /* RMON Counter Enable */
|
||
|
|
+// XRX200_BM_RMON_CTRL_RAM1, /* Buffer ManagerRMON Control Register */
|
||
|
|
+// XRX200_BM_RMON_CTRL_RAM2_RES, /* Software Reset for RMON RAM2 */
|
||
|
|
+// XRX200_BM_RMON_CTRL_RAM1_RES, /* Software Reset for RMON RAM1 */
|
||
|
|
+// XRX200_PQM_DP, /* Packet Queue ManagerDrop Probability Register */
|
||
|
|
+// XRX200_PQM_DP_DPROB, /* Drop Probability Profile */
|
||
|
|
+// XRX200_PQM_RS, /* Packet Queue ManagerRate Shaper Assignment Register */
|
||
|
|
+// XRX200_PQM_RS_EN2, /* Rate Shaper 2 Enable */
|
||
|
|
+// XRX200_PQM_RS_RS2, /* Rate Shaper 2 */
|
||
|
|
+// XRX200_PQM_RS_EN1, /* Rate Shaper 1 Enable */
|
||
|
|
+// XRX200_PQM_RS_RS1, /* Rate Shaper 1 */
|
||
|
|
+// XRX200_RS_CTRL, /* Rate Shaper ControlRegister */
|
||
|
|
+// XRX200_RS_CTRL_RSEN, /* Rate Shaper Enable */
|
||
|
|
+// XRX200_RS_CBS, /* Rate Shaper CommittedBurst Size Register */
|
||
|
|
+// XRX200_RS_CBS_CBS, /* Committed Burst Size */
|
||
|
|
+// XRX200_RS_IBS, /* Rate Shaper InstantaneousBurst Size Register */
|
||
|
|
+// XRX200_RS_IBS_IBS, /* Instantaneous Burst Size */
|
||
|
|
+// XRX200_RS_CIR_EXP, /* Rate Shaper RateExponent Register */
|
||
|
|
+// XRX200_RS_CIR_EXP_EXP, /* Exponent */
|
||
|
|
+// XRX200_RS_CIR_MANT, /* Rate Shaper RateMantissa Register */
|
||
|
|
+// XRX200_RS_CIR_MANT_MANT, /* Mantissa */
|
||
|
|
+ XRX200_PCE_TBL_KEY_7, /* Table Key Data 7 */
|
||
|
|
+// XRX200_PCE_TBL_KEY_7_KEY7, /* Key Value[15:0] */
|
||
|
|
+ XRX200_PCE_TBL_KEY_6, /* Table Key Data 6 */
|
||
|
|
+// XRX200_PCE_TBL_KEY_6_KEY6, /* Key Value[15:0] */
|
||
|
|
+ XRX200_PCE_TBL_KEY_5, /* Table Key Data 5 */
|
||
|
|
+// XRX200_PCE_TBL_KEY_5_KEY5, /* Key Value[15:0] */
|
||
|
|
+ XRX200_PCE_TBL_KEY_4, /* Table Key Data 4 */
|
||
|
|
+// XRX200_PCE_TBL_KEY_4_KEY4, /* Key Value[15:0] */
|
||
|
|
+ XRX200_PCE_TBL_KEY_3, /* Table Key Data 3 */
|
||
|
|
+// XRX200_PCE_TBL_KEY_3_KEY3, /* Key Value[15:0] */
|
||
|
|
+ XRX200_PCE_TBL_KEY_2, /* Table Key Data 2 */
|
||
|
|
+// XRX200_PCE_TBL_KEY_2_KEY2, /* Key Value[15:0] */
|
||
|
|
+ XRX200_PCE_TBL_KEY_1, /* Table Key Data 1 */
|
||
|
|
+// XRX200_PCE_TBL_KEY_1_KEY1, /* Key Value[31:16] */
|
||
|
|
+ XRX200_PCE_TBL_KEY_0, /* Table Key Data 0 */
|
||
|
|
+// XRX200_PCE_TBL_KEY_0_KEY0, /* Key Value[15:0] */
|
||
|
|
+ XRX200_PCE_TBL_MASK_0, /* Table Mask Write Register0 */
|
||
|
|
+// XRX200_PCE_TBL_MASK_0_MASK0, /* Mask Pattern [15:0] */
|
||
|
|
+ XRX200_PCE_TBL_VAL_4, /* Table Value Register4 */
|
||
|
|
+// XRX200_PCE_TBL_VAL_4_VAL4, /* Data value [15:0] */
|
||
|
|
+ XRX200_PCE_TBL_VAL_3, /* Table Value Register3 */
|
||
|
|
+// XRX200_PCE_TBL_VAL_3_VAL3, /* Data value [15:0] */
|
||
|
|
+ XRX200_PCE_TBL_VAL_2, /* Table Value Register2 */
|
||
|
|
+// XRX200_PCE_TBL_VAL_2_VAL2, /* Data value [15:0] */
|
||
|
|
+ XRX200_PCE_TBL_VAL_1, /* Table Value Register1 */
|
||
|
|
+// XRX200_PCE_TBL_VAL_1_VAL1, /* Data value [15:0] */
|
||
|
|
+ XRX200_PCE_TBL_VAL_0, /* Table Value Register0 */
|
||
|
|
+// XRX200_PCE_TBL_VAL_0_VAL0, /* Data value [15:0] */
|
||
|
|
+// XRX200_PCE_TBL_ADDR, /* Table Entry AddressRegister */
|
||
|
|
+ XRX200_PCE_TBL_ADDR_ADDR, /* Table Address */
|
||
|
|
+// XRX200_PCE_TBL_CTRL, /* Table Access ControlRegister */
|
||
|
|
+ XRX200_PCE_TBL_CTRL_BAS, /* Access Busy/Access Start */
|
||
|
|
+ XRX200_PCE_TBL_CTRL_TYPE, /* Lookup Entry Type */
|
||
|
|
+ XRX200_PCE_TBL_CTRL_VLD, /* Lookup Entry Valid */
|
||
|
|
+ XRX200_PCE_TBL_CTRL_GMAP, /* Group Map */
|
||
|
|
+ XRX200_PCE_TBL_CTRL_OPMOD, /* Lookup Table Access Operation Mode */
|
||
|
|
+ XRX200_PCE_TBL_CTRL_ADDR, /* Lookup Table Address */
|
||
|
|
+// XRX200_PCE_TBL_STAT, /* Table General StatusRegister */
|
||
|
|
+// XRX200_PCE_TBL_STAT_TBUSY, /* Table Access Busy */
|
||
|
|
+// XRX200_PCE_TBL_STAT_TEMPT, /* Table Empty */
|
||
|
|
+// XRX200_PCE_TBL_STAT_TFUL, /* Table Full */
|
||
|
|
+// XRX200_PCE_AGE_0, /* Aging Counter ConfigurationRegister 0 */
|
||
|
|
+// XRX200_PCE_AGE_0_EXP, /* Aging Counter Exponent Value */
|
||
|
|
+// XRX200_PCE_AGE_1, /* Aging Counter ConfigurationRegister 1 */
|
||
|
|
+// XRX200_PCE_AGE_1_MANT, /* Aging Counter Mantissa Value */
|
||
|
|
+// XRX200_PCE_PMAP_1, /* Port Map Register 1 */
|
||
|
|
+// XRX200_PCE_PMAP_1_MPMAP, /* Monitoring Port Map */
|
||
|
|
+// XRX200_PCE_PMAP_2, /* Port Map Register 2 */
|
||
|
|
+// XRX200_PCE_PMAP_2_DMCPMAP, /* Default Multicast Port Map */
|
||
|
|
+// XRX200_PCE_PMAP_3, /* Port Map Register 3 */
|
||
|
|
+// XRX200_PCE_PMAP_3_UUCMAP, /* Default Unknown Unicast Port Map */
|
||
|
|
+// XRX200_PCE_GCTRL_0, /* PCE Global Control Register0 */
|
||
|
|
+// XRX200_PCE_GCTRL_0_IGMP, /* IGMP Mode Selection */
|
||
|
|
+ XRX200_PCE_GCTRL_0_VLAN, /* VLAN-aware Switching */
|
||
|
|
+// XRX200_PCE_GCTRL_0_NOPM, /* No Port Map Forwarding */
|
||
|
|
+// XRX200_PCE_GCTRL_0_SCONUC, /* Unknown Unicast Storm Control */
|
||
|
|
+// XRX200_PCE_GCTRL_0_SCONMC, /* Multicast Storm Control */
|
||
|
|
+// XRX200_PCE_GCTRL_0_SCONBC, /* Broadcast Storm Control */
|
||
|
|
+// XRX200_PCE_GCTRL_0_SCONMOD, /* Storm Control Mode */
|
||
|
|
+// XRX200_PCE_GCTRL_0_SCONMET, /* Storm Control Metering Instance */
|
||
|
|
+// XRX200_PCE_GCTRL_0_MC_VALID, /* Access Request */
|
||
|
|
+// XRX200_PCE_GCTRL_0_PLCKMOD, /* Port Lock Mode */
|
||
|
|
+// XRX200_PCE_GCTRL_0_PLIMMOD, /* MAC Address Learning Limitation Mode */
|
||
|
|
+// XRX200_PCE_GCTRL_0_MTFL, /* MAC Table Flushing */
|
||
|
|
+// XRX200_PCE_GCTRL_1, /* PCE Global Control Register1 */
|
||
|
|
+// XRX200_PCE_GCTRL_1_PCE_DIS, /* PCE Disable after currently processed packet */
|
||
|
|
+// XRX200_PCE_GCTRL_1_LRNMOD, /* MAC Address Learning Mode */
|
||
|
|
+// XRX200_PCE_TCM_GLOB_CTRL, /* Three-color MarkerGlobal Control Register */
|
||
|
|
+// XRX200_PCE_TCM_GLOB_CTRL_DPRED, /* Re-marking Drop Precedence Red Encoding */
|
||
|
|
+// XRX200_PCE_TCM_GLOB_CTRL_DPYEL, /* Re-marking Drop Precedence Yellow Encoding */
|
||
|
|
+// XRX200_PCE_TCM_GLOB_CTRL_DPGRN, /* Re-marking Drop Precedence Green Encoding */
|
||
|
|
+// XRX200_PCE_IGMP_CTRL, /* IGMP Control Register */
|
||
|
|
+// XRX200_PCE_IGMP_CTRL_FAGEEN, /* Force Aging of Table Entries Enable */
|
||
|
|
+// XRX200_PCE_IGMP_CTRL_FLEAVE, /* Fast Leave Enable */
|
||
|
|
+// XRX200_PCE_IGMP_CTRL_DMRTEN, /* Default Maximum Response Time Enable */
|
||
|
|
+// XRX200_PCE_IGMP_CTRL_JASUP, /* Join Aggregation Suppression Enable */
|
||
|
|
+// XRX200_PCE_IGMP_CTRL_REPSUP, /* Report Suppression Enable */
|
||
|
|
+// XRX200_PCE_IGMP_CTRL_SRPEN, /* Snooping of Router Port Enable */
|
||
|
|
+// XRX200_PCE_IGMP_CTRL_ROB, /* Robustness Variable */
|
||
|
|
+// XRX200_PCE_IGMP_CTRL_DMRT, /* IGMP Default Maximum Response Time */
|
||
|
|
+// XRX200_PCE_IGMP_DRPM, /* IGMP Default RouterPort Map Register */
|
||
|
|
+// XRX200_PCE_IGMP_DRPM_DRPM, /* IGMP Default Router Port Map */
|
||
|
|
+// XRX200_PCE_IGMP_AGE_0, /* IGMP Aging Register0 */
|
||
|
|
+// XRX200_PCE_IGMP_AGE_0_MANT, /* IGMP Group Aging Time Mantissa */
|
||
|
|
+// XRX200_PCE_IGMP_AGE_0_EXP, /* IGMP Group Aging Time Exponent */
|
||
|
|
+// XRX200_PCE_IGMP_AGE_1, /* IGMP Aging Register1 */
|
||
|
|
+// XRX200_PCE_IGMP_AGE_1_MANT, /* IGMP Router Port Aging Time Mantissa */
|
||
|
|
+// XRX200_PCE_IGMP_STAT, /* IGMP Status Register */
|
||
|
|
+// XRX200_PCE_IGMP_STAT_IGPM, /* IGMP Port Map */
|
||
|
|
+// XRX200_WOL_GLB_CTRL, /* Wake-on-LAN ControlRegister */
|
||
|
|
+// XRX200_WOL_GLB_CTRL_PASSEN, /* WoL Password Enable */
|
||
|
|
+// XRX200_WOL_DA_0, /* Wake-on-LAN DestinationAddress Register 0 */
|
||
|
|
+// XRX200_WOL_DA_0_DA0, /* WoL Destination Address [15:0] */
|
||
|
|
+// XRX200_WOL_DA_1, /* Wake-on-LAN DestinationAddress Register 1 */
|
||
|
|
+// XRX200_WOL_DA_1_DA1, /* WoL Destination Address [31:16] */
|
||
|
|
+// XRX200_WOL_DA_2, /* Wake-on-LAN DestinationAddress Register 2 */
|
||
|
|
+// XRX200_WOL_DA_2_DA2, /* WoL Destination Address [47:32] */
|
||
|
|
+// XRX200_WOL_PW_0, /* Wake-on-LAN Password Register0 */
|
||
|
|
+// XRX200_WOL_PW_0_PW0, /* WoL Password [15:0] */
|
||
|
|
+// XRX200_WOL_PW_1, /* Wake-on-LAN Password Register1 */
|
||
|
|
+// XRX200_WOL_PW_1_PW1, /* WoL Password [31:16] */
|
||
|
|
+// XRX200_WOL_PW_2, /* Wake-on-LAN Password Register2 */
|
||
|
|
+// XRX200_WOL_PW_2_PW2, /* WoL Password [47:32] */
|
||
|
|
+// XRX200_PCE_IER_0_PINT, /* Parser and ClassificationEngine Global Interrupt Enable Register 0 */
|
||
|
|
+// XRX200_PCE_IER_0_PINT_15, /* Port Interrupt Enable */
|
||
|
|
+// XRX200_PCE_IER_0_PINT_14, /* Port Interrupt Enable */
|
||
|
|
+// XRX200_PCE_IER_0_PINT_13, /* Port Interrupt Enable */
|
||
|
|
+// XRX200_PCE_IER_0_PINT_12, /* Port Interrupt Enable */
|
||
|
|
+// XRX200_PCE_IER_0_PINT_11, /* Port Interrupt Enable */
|
||
|
|
+// XRX200_PCE_IER_0_PINT_10, /* Port Interrupt Enable */
|
||
|
|
+// XRX200_PCE_IER_0_PINT_9, /* Port Interrupt Enable */
|
||
|
|
+// XRX200_PCE_IER_0_PINT_8, /* Port Interrupt Enable */
|
||
|
|
+// XRX200_PCE_IER_0_PINT_7, /* Port Interrupt Enable */
|
||
|
|
+// XRX200_PCE_IER_0_PINT_6, /* Port Interrupt Enable */
|
||
|
|
+// XRX200_PCE_IER_0_PINT_5, /* Port Interrupt Enable */
|
||
|
|
+// XRX200_PCE_IER_0_PINT_4, /* Port Interrupt Enable */
|
||
|
|
+// XRX200_PCE_IER_0_PINT_3, /* Port Interrupt Enable */
|
||
|
|
+// XRX200_PCE_IER_0_PINT_2, /* Port Interrupt Enable */
|
||
|
|
+// XRX200_PCE_IER_0_PINT_1, /* Port Interrupt Enable */
|
||
|
|
+// XRX200_PCE_IER_0_PINT_0, /* Port Interrupt Enable */
|
||
|
|
+// XRX200_PCE_IER_1, /* Parser and ClassificationEngine Global Interrupt Enable Register 1 */
|
||
|
|
+// XRX200_PCE_IER_1_FLOWINT, /* Traffic Flow Table Interrupt Rule matched Interrupt Enable */
|
||
|
|
+// XRX200_PCE_IER_1_CPH2, /* Classification Phase 2 Ready Interrupt Enable */
|
||
|
|
+// XRX200_PCE_IER_1_CPH1, /* Classification Phase 1 Ready Interrupt Enable */
|
||
|
|
+// XRX200_PCE_IER_1_CPH0, /* Classification Phase 0 Ready Interrupt Enable */
|
||
|
|
+// XRX200_PCE_IER_1_PRDY, /* Parser Ready Interrupt Enable */
|
||
|
|
+// XRX200_PCE_IER_1_IGTF, /* IGMP Table Full Interrupt Enable */
|
||
|
|
+// XRX200_PCE_IER_1_MTF, /* MAC Table Full Interrupt Enable */
|
||
|
|
+// XRX200_PCE_ISR_0_PINT, /* Parser and ClassificationEngine Global Interrupt Status Register 0 */
|
||
|
|
+// XRX200_PCE_ISR_0_PINT_15, /* Port Interrupt */
|
||
|
|
+// XRX200_PCE_ISR_0_PINT_14, /* Port Interrupt */
|
||
|
|
+// XRX200_PCE_ISR_0_PINT_13, /* Port Interrupt */
|
||
|
|
+// XRX200_PCE_ISR_0_PINT_12, /* Port Interrupt */
|
||
|
|
+// XRX200_PCE_ISR_0_PINT_11, /* Port Interrupt */
|
||
|
|
+// XRX200_PCE_ISR_0_PINT_10, /* Port Interrupt */
|
||
|
|
+// XRX200_PCE_ISR_0_PINT_9, /* Port Interrupt */
|
||
|
|
+// XRX200_PCE_ISR_0_PINT_8, /* Port Interrupt */
|
||
|
|
+// XRX200_PCE_ISR_0_PINT_7, /* Port Interrupt */
|
||
|
|
+// XRX200_PCE_ISR_0_PINT_6, /* Port Interrupt */
|
||
|
|
+// XRX200_PCE_ISR_0_PINT_5, /* Port Interrupt */
|
||
|
|
+// XRX200_PCE_ISR_0_PINT_4, /* Port Interrupt */
|
||
|
|
+// XRX200_PCE_ISR_0_PINT_3, /* Port Interrupt */
|
||
|
|
+// XRX200_PCE_ISR_0_PINT_2, /* Port Interrupt */
|
||
|
|
+// XRX200_PCE_ISR_0_PINT_1, /* Port Interrupt */
|
||
|
|
+// XRX200_PCE_ISR_0_PINT_0, /* Port Interrupt */
|
||
|
|
+// XRX200_PCE_ISR_1, /* Parser and ClassificationEngine Global Interrupt Status Register 1 */
|
||
|
|
+// XRX200_PCE_ISR_1_FLOWINT, /* Traffic Flow Table Interrupt Rule matched */
|
||
|
|
+// XRX200_PCE_ISR_1_CPH2, /* Classification Phase 2 Ready Interrupt */
|
||
|
|
+// XRX200_PCE_ISR_1_CPH1, /* Classification Phase 1 Ready Interrupt */
|
||
|
|
+// XRX200_PCE_ISR_1_CPH0, /* Classification Phase 0 Ready Interrupt */
|
||
|
|
+// XRX200_PCE_ISR_1_PRDY, /* Parser Ready Interrupt */
|
||
|
|
+// XRX200_PCE_ISR_1_IGTF, /* IGMP Table Full Interrupt */
|
||
|
|
+// XRX200_PCE_ISR_1_MTF, /* MAC Table Full Interrupt */
|
||
|
|
+// XRX200_PARSER_STAT_FIFO, /* Parser Status Register */
|
||
|
|
+// XRX200_PARSER_STAT_FSM_DAT_CNT, /* Parser FSM Data Counter */
|
||
|
|
+// XRX200_PARSER_STAT_FSM_STATE, /* Parser FSM State */
|
||
|
|
+// XRX200_PARSER_STAT_PKT_ERR, /* Packet error detected */
|
||
|
|
+// XRX200_PARSER_STAT_FSM_FIN, /* Parser FSM finished */
|
||
|
|
+// XRX200_PARSER_STAT_FSM_START, /* Parser FSM start */
|
||
|
|
+// XRX200_PARSER_STAT_FIFO_RDY, /* Parser FIFO ready for read. */
|
||
|
|
+// XRX200_PARSER_STAT_FIFO_FULL, /* Parser */
|
||
|
|
+// XRX200_PCE_PCTRL_0, /* PCE Port ControlRegister 0 */
|
||
|
|
+// XRX200_PCE_PCTRL_0_MCST, /* Multicast Forwarding Mode Selection */
|
||
|
|
+// XRX200_PCE_PCTRL_0_EGSTEN, /* Table-based Egress Special Tag Enable */
|
||
|
|
+// XRX200_PCE_PCTRL_0_IGSTEN, /* Ingress Special Tag Enable */
|
||
|
|
+// XRX200_PCE_PCTRL_0_PCPEN, /* PCP Remarking Mode */
|
||
|
|
+// XRX200_PCE_PCTRL_0_CLPEN, /* Class Remarking Mode */
|
||
|
|
+// XRX200_PCE_PCTRL_0_DPEN, /* Drop Precedence Remarking Mode */
|
||
|
|
+// XRX200_PCE_PCTRL_0_CMOD, /* Three-color Marker Color Mode */
|
||
|
|
+// XRX200_PCE_PCTRL_0_VREP, /* VLAN Replacement Mode */
|
||
|
|
+ XRX200_PCE_PCTRL_0_TVM, /* Transparent VLAN Mode */
|
||
|
|
+// XRX200_PCE_PCTRL_0_PLOCK, /* Port Locking Enable */
|
||
|
|
+// XRX200_PCE_PCTRL_0_AGEDIS, /* Aging Disable */
|
||
|
|
+// XRX200_PCE_PCTRL_0_PSTATE, /* Port State */
|
||
|
|
+// XRX200_PCE_PCTRL_1, /* PCE Port ControlRegister 1 */
|
||
|
|
+// XRX200_PCE_PCTRL_1_LRNLIM, /* MAC Address Learning Limit */
|
||
|
|
+// XRX200_PCE_PCTRL_2, /* PCE Port ControlRegister 2 */
|
||
|
|
+// XRX200_PCE_PCTRL_2_DSCPMOD, /* DSCP Mode Selection */
|
||
|
|
+// XRX200_PCE_PCTRL_2_DSCP, /* Enable DSCP to select the Class of Service */
|
||
|
|
+// XRX200_PCE_PCTRL_2_PCP, /* Enable VLAN PCP to select the Class of Service */
|
||
|
|
+// XRX200_PCE_PCTRL_2_PCLASS, /* Port-based Traffic Class */
|
||
|
|
+// XRX200_PCE_PCTRL_3_VIO, /* PCE Port ControlRegister 3 */
|
||
|
|
+// XRX200_PCE_PCTRL_3_EDIR, /* Egress Redirection Mode */
|
||
|
|
+// XRX200_PCE_PCTRL_3_RXDMIR, /* Receive Mirroring Enable for dropped frames */
|
||
|
|
+// XRX200_PCE_PCTRL_3_RXVMIR, /* Receive Mirroring Enable for valid frames */
|
||
|
|
+// XRX200_PCE_PCTRL_3_TXMIR, /* Transmit Mirroring Enable */
|
||
|
|
+// XRX200_PCE_PCTRL_3_VIO_7, /* Violation Type 7 Mirroring Enable */
|
||
|
|
+// XRX200_PCE_PCTRL_3_VIO_6, /* Violation Type 6 Mirroring Enable */
|
||
|
|
+// XRX200_PCE_PCTRL_3_VIO_5, /* Violation Type 5 Mirroring Enable */
|
||
|
|
+// XRX200_PCE_PCTRL_3_VIO_4, /* Violation Type 4 Mirroring Enable */
|
||
|
|
+// XRX200_PCE_PCTRL_3_VIO_3, /* Violation Type 3 Mirroring Enable */
|
||
|
|
+// XRX200_PCE_PCTRL_3_VIO_2, /* Violation Type 2 Mirroring Enable */
|
||
|
|
+// XRX200_PCE_PCTRL_3_VIO_1, /* Violation Type 1 Mirroring Enable */
|
||
|
|
+// XRX200_PCE_PCTRL_3_VIO_0, /* Violation Type 0 Mirroring Enable */
|
||
|
|
+// XRX200_WOL_CTRL, /* Wake-on-LAN ControlRegister */
|
||
|
|
+// XRX200_WOL_CTRL_PORT, /* WoL Enable */
|
||
|
|
+// XRX200_PCE_VCTRL, /* PCE VLAN ControlRegister */
|
||
|
|
+ XRX200_PCE_VCTRL_VSR, /* VLAN Security Rule */
|
||
|
|
+ XRX200_PCE_VCTRL_VEMR, /* VLAN Egress Member Violation Rule */
|
||
|
|
+ XRX200_PCE_VCTRL_VIMR, /* VLAN Ingress Member Violation Rule */
|
||
|
|
+ XRX200_PCE_VCTRL_VINR, /* VLAN Ingress Tag Rule */
|
||
|
|
+ XRX200_PCE_VCTRL_UVR, /* Unknown VLAN Rule */
|
||
|
|
+// XRX200_PCE_DEFPVID, /* PCE Default PortVID Register */
|
||
|
|
+ XRX200_PCE_DEFPVID_PVID, /* Default Port VID Index */
|
||
|
|
+// XRX200_PCE_PSTAT, /* PCE Port StatusRegister */
|
||
|
|
+// XRX200_PCE_PSTAT_LRNCNT, /* Learning Count */
|
||
|
|
+// XRX200_PCE_PIER, /* Parser and ClassificationEngine Port Interrupt Enable Register */
|
||
|
|
+// XRX200_PCE_PIER_CLDRP, /* Classification Drop Interrupt Enable */
|
||
|
|
+// XRX200_PCE_PIER_PTDRP, /* Port Drop Interrupt Enable */
|
||
|
|
+// XRX200_PCE_PIER_VLAN, /* VLAN Violation Interrupt Enable */
|
||
|
|
+// XRX200_PCE_PIER_WOL, /* Wake-on-LAN Interrupt Enable */
|
||
|
|
+// XRX200_PCE_PIER_LOCK, /* Port Limit Alert Interrupt Enable */
|
||
|
|
+// XRX200_PCE_PIER_LIM, /* Port Lock Alert Interrupt Enable */
|
||
|
|
+// XRX200_PCE_PISR, /* Parser and ClassificationEngine Port Interrupt Status Register */
|
||
|
|
+// XRX200_PCE_PISR_CLDRP, /* Classification Drop Interrupt */
|
||
|
|
+// XRX200_PCE_PISR_PTDRP, /* Port Drop Interrupt */
|
||
|
|
+// XRX200_PCE_PISR_VLAN, /* VLAN Violation Interrupt */
|
||
|
|
+// XRX200_PCE_PISR_WOL, /* Wake-on-LAN Interrupt */
|
||
|
|
+// XRX200_PCE_PISR_LOCK, /* Port Lock Alert Interrupt */
|
||
|
|
+// XRX200_PCE_PISR_LIMIT, /* Port Limitation Alert Interrupt */
|
||
|
|
+// XRX200_PCE_TCM_CTRL, /* Three-colorMarker Control Register */
|
||
|
|
+// XRX200_PCE_TCM_CTRL_TCMEN, /* Three-color Marker metering instance enable */
|
||
|
|
+// XRX200_PCE_TCM_STAT, /* Three-colorMarker Status Register */
|
||
|
|
+// XRX200_PCE_TCM_STAT_AL1, /* Three-color Marker Alert 1 Status */
|
||
|
|
+// XRX200_PCE_TCM_STAT_AL0, /* Three-color Marker Alert 0 Status */
|
||
|
|
+// XRX200_PCE_TCM_CBS, /* Three-color MarkerCommitted Burst Size Register */
|
||
|
|
+// XRX200_PCE_TCM_CBS_CBS, /* Committed Burst Size */
|
||
|
|
+// XRX200_PCE_TCM_EBS, /* Three-color MarkerExcess Burst Size Register */
|
||
|
|
+// XRX200_PCE_TCM_EBS_EBS, /* Excess Burst Size */
|
||
|
|
+// XRX200_PCE_TCM_IBS, /* Three-color MarkerInstantaneous Burst Size Register */
|
||
|
|
+// XRX200_PCE_TCM_IBS_IBS, /* Instantaneous Burst Size */
|
||
|
|
+// XRX200_PCE_TCM_CIR_MANT, /* Three-colorMarker Constant Information Rate Mantissa Register */
|
||
|
|
+// XRX200_PCE_TCM_CIR_MANT_MANT, /* Rate Counter Mantissa */
|
||
|
|
+// XRX200_PCE_TCM_CIR_EXP, /* Three-colorMarker Constant Information Rate Exponent Register */
|
||
|
|
+// XRX200_PCE_TCM_CIR_EXP_EXP, /* Rate Counter Exponent */
|
||
|
|
+// XRX200_MAC_TEST, /* MAC Test Register */
|
||
|
|
+// XRX200_MAC_TEST_JTP, /* Jitter Test Pattern */
|
||
|
|
+// XRX200_MAC_PFAD_CFG, /* MAC Pause FrameSource Address Configuration Register */
|
||
|
|
+// XRX200_MAC_PFAD_CFG_SAMOD, /* Source Address Mode */
|
||
|
|
+// XRX200_MAC_PFSA_0, /* Pause Frame SourceAddress Part 0 */
|
||
|
|
+// XRX200_MAC_PFSA_0_PFAD, /* Pause Frame Source Address Part 0 */
|
||
|
|
+// XRX200_MAC_PFSA_1, /* Pause Frame SourceAddress Part 1 */
|
||
|
|
+// XRX200_MAC_PFSA_1_PFAD, /* Pause Frame Source Address Part 1 */
|
||
|
|
+// XRX200_MAC_PFSA_2, /* Pause Frame SourceAddress Part 2 */
|
||
|
|
+// XRX200_MAC_PFSA_2_PFAD, /* Pause Frame Source Address Part 2 */
|
||
|
|
+// XRX200_MAC_FLEN, /* MAC Frame Length Register */
|
||
|
|
+// XRX200_MAC_FLEN_LEN, /* Maximum Frame Length */
|
||
|
|
+// XRX200_MAC_VLAN_ETYPE_0, /* MAC VLAN EthertypeRegister 0 */
|
||
|
|
+// XRX200_MAC_VLAN_ETYPE_0_OUTER, /* Ethertype */
|
||
|
|
+// XRX200_MAC_VLAN_ETYPE_1, /* MAC VLAN EthertypeRegister 1 */
|
||
|
|
+// XRX200_MAC_VLAN_ETYPE_1_INNER, /* Ethertype */
|
||
|
|
+// XRX200_MAC_IER, /* MAC Interrupt EnableRegister */
|
||
|
|
+// XRX200_MAC_IER_MACIEN, /* MAC Interrupt Enable */
|
||
|
|
+// XRX200_MAC_ISR, /* MAC Interrupt StatusRegister */
|
||
|
|
+// XRX200_MAC_ISR_MACINT, /* MAC Interrupt */
|
||
|
|
+// XRX200_MAC_PSTAT, /* MAC Port Status Register */
|
||
|
|
+// XRX200_MAC_PSTAT_PACT, /* PHY Active Status */
|
||
|
|
+ XRX200_MAC_PSTAT_GBIT, /* Gigabit Speed Status */
|
||
|
|
+ XRX200_MAC_PSTAT_MBIT, /* Megabit Speed Status */
|
||
|
|
+ XRX200_MAC_PSTAT_FDUP, /* Full Duplex Status */
|
||
|
|
+// XRX200_MAC_PSTAT_RXPAU, /* Receive Pause Status */
|
||
|
|
+// XRX200_MAC_PSTAT_TXPAU, /* Transmit Pause Status */
|
||
|
|
+// XRX200_MAC_PSTAT_RXPAUEN, /* Receive Pause Enable Status */
|
||
|
|
+// XRX200_MAC_PSTAT_TXPAUEN, /* Transmit Pause Enable Status */
|
||
|
|
+ XRX200_MAC_PSTAT_LSTAT, /* Link Status */
|
||
|
|
+// XRX200_MAC_PSTAT_CRS, /* Carrier Sense Status */
|
||
|
|
+// XRX200_MAC_PSTAT_TXLPI, /* Transmit Low-power Idle Status */
|
||
|
|
+// XRX200_MAC_PSTAT_RXLPI, /* Receive Low-power Idle Status */
|
||
|
|
+// XRX200_MAC_PISR, /* MAC Interrupt Status Register */
|
||
|
|
+// XRX200_MAC_PISR_PACT, /* PHY Active Status */
|
||
|
|
+// XRX200_MAC_PISR_SPEED, /* Megabit Speed Status */
|
||
|
|
+// XRX200_MAC_PISR_FDUP, /* Full Duplex Status */
|
||
|
|
+// XRX200_MAC_PISR_RXPAUEN, /* Receive Pause Enable Status */
|
||
|
|
+// XRX200_MAC_PISR_TXPAUEN, /* Transmit Pause Enable Status */
|
||
|
|
+// XRX200_MAC_PISR_LPIOFF, /* Receive Low-power Idle Mode is left */
|
||
|
|
+// XRX200_MAC_PISR_LPION, /* Receive Low-power Idle Mode is entered */
|
||
|
|
+// XRX200_MAC_PISR_JAM, /* Jam Status Detected */
|
||
|
|
+// XRX200_MAC_PISR_TOOSHORT, /* Too Short Frame Error Detected */
|
||
|
|
+// XRX200_MAC_PISR_TOOLONG, /* Too Long Frame Error Detected */
|
||
|
|
+// XRX200_MAC_PISR_LENERR, /* Length Mismatch Error Detected */
|
||
|
|
+// XRX200_MAC_PISR_FCSERR, /* Frame Checksum Error Detected */
|
||
|
|
+// XRX200_MAC_PISR_TXPAUSE, /* Pause Frame Transmitted */
|
||
|
|
+// XRX200_MAC_PISR_RXPAUSE, /* Pause Frame Received */
|
||
|
|
+// XRX200_MAC_PIER, /* MAC Interrupt Enable Register */
|
||
|
|
+// XRX200_MAC_PIER_PACT, /* PHY Active Status */
|
||
|
|
+// XRX200_MAC_PIER_SPEED, /* Megabit Speed Status */
|
||
|
|
+// XRX200_MAC_PIER_FDUP, /* Full Duplex Status */
|
||
|
|
+// XRX200_MAC_PIER_RXPAUEN, /* Receive Pause Enable Status */
|
||
|
|
+// XRX200_MAC_PIER_TXPAUEN, /* Transmit Pause Enable Status */
|
||
|
|
+// XRX200_MAC_PIER_LPIOFF, /* Low-power Idle Off Interrupt Mask */
|
||
|
|
+// XRX200_MAC_PIER_LPION, /* Low-power Idle On Interrupt Mask */
|
||
|
|
+// XRX200_MAC_PIER_JAM, /* Jam Status Interrupt Mask */
|
||
|
|
+// XRX200_MAC_PIER_TOOSHORT, /* Too Short Frame Error Interrupt Mask */
|
||
|
|
+// XRX200_MAC_PIER_TOOLONG, /* Too Long Frame Error Interrupt Mask */
|
||
|
|
+// XRX200_MAC_PIER_LENERR, /* Length Mismatch Error Interrupt Mask */
|
||
|
|
+// XRX200_MAC_PIER_FCSERR, /* Frame Checksum Error Interrupt Mask */
|
||
|
|
+// XRX200_MAC_PIER_TXPAUSE, /* Transmit Pause Frame Interrupt Mask */
|
||
|
|
+// XRX200_MAC_PIER_RXPAUSE, /* Receive Pause Frame Interrupt Mask */
|
||
|
|
+// XRX200_MAC_CTRL_0, /* MAC Control Register0 */
|
||
|
|
+// XRX200_MAC_CTRL_0_LCOL, /* Late Collision Control */
|
||
|
|
+// XRX200_MAC_CTRL_0_BM, /* Burst Mode Control */
|
||
|
|
+// XRX200_MAC_CTRL_0_APADEN, /* Automatic VLAN Padding Enable */
|
||
|
|
+// XRX200_MAC_CTRL_0_VPAD2EN, /* Stacked VLAN Padding Enable */
|
||
|
|
+// XRX200_MAC_CTRL_0_VPADEN, /* VLAN Padding Enable */
|
||
|
|
+// XRX200_MAC_CTRL_0_PADEN, /* Padding Enable */
|
||
|
|
+// XRX200_MAC_CTRL_0_FCS, /* Transmit FCS Control */
|
||
|
|
+ XRX200_MAC_CTRL_0_FCON, /* Flow Control Mode */
|
||
|
|
+// XRX200_MAC_CTRL_0_FDUP, /* Full Duplex Control */
|
||
|
|
+// XRX200_MAC_CTRL_0_GMII, /* GMII/MII interface mode selection */
|
||
|
|
+// XRX200_MAC_CTRL_1, /* MAC Control Register1 */
|
||
|
|
+// XRX200_MAC_CTRL_1_SHORTPRE, /* Short Preamble Control */
|
||
|
|
+// XRX200_MAC_CTRL_1_IPG, /* Minimum Inter Packet Gap Size */
|
||
|
|
+// XRX200_MAC_CTRL_2, /* MAC Control Register2 */
|
||
|
|
+// XRX200_MAC_CTRL_2_MLEN, /* Maximum Untagged Frame Length */
|
||
|
|
+// XRX200_MAC_CTRL_2_LCHKL, /* Frame Length Check Long Enable */
|
||
|
|
+// XRX200_MAC_CTRL_2_LCHKS, /* Frame Length Check Short Enable */
|
||
|
|
+// XRX200_MAC_CTRL_3, /* MAC Control Register3 */
|
||
|
|
+// XRX200_MAC_CTRL_3_RCNT, /* Retry Count */
|
||
|
|
+// XRX200_MAC_CTRL_4, /* MAC Control Register4 */
|
||
|
|
+// XRX200_MAC_CTRL_4_LPIEN, /* LPI Mode Enable */
|
||
|
|
+// XRX200_MAC_CTRL_4_WAIT, /* LPI Wait Time */
|
||
|
|
+// XRX200_MAC_CTRL_5_PJPS, /* MAC Control Register5 */
|
||
|
|
+// XRX200_MAC_CTRL_5_PJPS_NOBP, /* Prolonged Jam pattern size during no-backpressure state */
|
||
|
|
+// XRX200_MAC_CTRL_5_PJPS_BP, /* Prolonged Jam pattern size during backpressure state */
|
||
|
|
+// XRX200_MAC_CTRL_6_XBUF, /* Transmit and ReceiveBuffer Control Register */
|
||
|
|
+// XRX200_MAC_CTRL_6_RBUF_DLY_WP, /* Delay */
|
||
|
|
+// XRX200_MAC_CTRL_6_RBUF_INIT, /* Receive Buffer Initialization */
|
||
|
|
+// XRX200_MAC_CTRL_6_RBUF_BYPASS, /* Bypass the Receive Buffer */
|
||
|
|
+// XRX200_MAC_CTRL_6_XBUF_DLY_WP, /* Delay */
|
||
|
|
+// XRX200_MAC_CTRL_6_XBUF_INIT, /* Initialize the Transmit Buffer */
|
||
|
|
+// XRX200_MAC_CTRL_6_XBUF_BYPASS, /* Bypass the Transmit Buffer */
|
||
|
|
+// XRX200_MAC_BUFST_XBUF, /* MAC Receive and TransmitBuffer Status Register */
|
||
|
|
+// XRX200_MAC_BUFST_RBUF_UFL, /* Receive Buffer Underflow Indicator */
|
||
|
|
+// XRX200_MAC_BUFST_RBUF_OFL, /* Receive Buffer Overflow Indicator */
|
||
|
|
+// XRX200_MAC_BUFST_XBUF_UFL, /* Transmit Buffer Underflow Indicator */
|
||
|
|
+// XRX200_MAC_BUFST_XBUF_OFL, /* Transmit Buffer Overflow Indicator */
|
||
|
|
+// XRX200_MAC_TESTEN, /* MAC Test Enable Register */
|
||
|
|
+// XRX200_MAC_TESTEN_JTEN, /* Jitter Test Enable */
|
||
|
|
+// XRX200_MAC_TESTEN_TXER, /* Transmit Error Insertion */
|
||
|
|
+// XRX200_MAC_TESTEN_LOOP, /* MAC Loopback Enable */
|
||
|
|
+// XRX200_FDMA_CTRL, /* Ethernet Switch FetchDMA Control Register */
|
||
|
|
+// XRX200_FDMA_CTRL_LPI_THRESHOLD, /* Low Power Idle Threshold */
|
||
|
|
+// XRX200_FDMA_CTRL_LPI_MODE, /* Low Power Idle Mode */
|
||
|
|
+// XRX200_FDMA_CTRL_EGSTAG, /* Egress Special Tag Size */
|
||
|
|
+// XRX200_FDMA_CTRL_IGSTAG, /* Ingress Special Tag Size */
|
||
|
|
+// XRX200_FDMA_CTRL_EXCOL, /* Excessive Collision Handling */
|
||
|
|
+// XRX200_FDMA_STETYPE, /* Special Tag EthertypeControl Register */
|
||
|
|
+// XRX200_FDMA_STETYPE_ETYPE, /* Special Tag Ethertype */
|
||
|
|
+// XRX200_FDMA_VTETYPE, /* VLAN Tag EthertypeControl Register */
|
||
|
|
+// XRX200_FDMA_VTETYPE_ETYPE, /* VLAN Tag Ethertype */
|
||
|
|
+// XRX200_FDMA_STAT_0, /* FDMA Status Register0 */
|
||
|
|
+// XRX200_FDMA_STAT_0_FSMS, /* FSM states status */
|
||
|
|
+// XRX200_FDMA_IER, /* Fetch DMA Global InterruptEnable Register */
|
||
|
|
+// XRX200_FDMA_IER_PCKD, /* Packet Drop Interrupt Enable */
|
||
|
|
+// XRX200_FDMA_IER_PCKR, /* Packet Ready Interrupt Enable */
|
||
|
|
+// XRX200_FDMA_IER_PCKT, /* Packet Sent Interrupt Enable */
|
||
|
|
+// XRX200_FDMA_ISR, /* Fetch DMA Global InterruptStatus Register */
|
||
|
|
+// XRX200_FDMA_ISR_PCKTD, /* Packet Drop */
|
||
|
|
+// XRX200_FDMA_ISR_PCKR, /* Packet is Ready for Transmission */
|
||
|
|
+// XRX200_FDMA_ISR_PCKT, /* Packet Sent Event */
|
||
|
|
+// XRX200_FDMA_PCTRL, /* Ethernet SwitchFetch DMA Port Control Register */
|
||
|
|
+// XRX200_FDMA_PCTRL_VLANMOD, /* VLAN Modification Enable */
|
||
|
|
+// XRX200_FDMA_PCTRL_DSCPRM, /* DSCP Re-marking Enable */
|
||
|
|
+// XRX200_FDMA_PCTRL_STEN, /* Special Tag Insertion Enable */
|
||
|
|
+// XRX200_FDMA_PCTRL_EN, /* FDMA Port Enable */
|
||
|
|
+// XRX200_FDMA_PRIO, /* Ethernet SwitchFetch DMA Port Priority Register */
|
||
|
|
+// XRX200_FDMA_PRIO_PRIO, /* FDMA PRIO */
|
||
|
|
+// XRX200_FDMA_PSTAT0, /* Ethernet SwitchFetch DMA Port Status Register 0 */
|
||
|
|
+// XRX200_FDMA_PSTAT0_PKT_AVAIL, /* Port Egress Packet Available */
|
||
|
|
+// XRX200_FDMA_PSTAT0_POK, /* Port Status OK */
|
||
|
|
+// XRX200_FDMA_PSTAT0_PSEG, /* Port Egress Segment Count */
|
||
|
|
+// XRX200_FDMA_PSTAT1_HDR, /* Ethernet SwitchFetch DMA Port Status Register 1 */
|
||
|
|
+// XRX200_FDMA_PSTAT1_HDR_PTR, /* Header Pointer */
|
||
|
|
+// XRX200_FDMA_TSTAMP0, /* Egress TimeStamp Register 0 */
|
||
|
|
+// XRX200_FDMA_TSTAMP0_TSTL, /* Time Stamp [15:0] */
|
||
|
|
+// XRX200_FDMA_TSTAMP1, /* Egress TimeStamp Register 1 */
|
||
|
|
+// XRX200_FDMA_TSTAMP1_TSTH, /* Time Stamp [31:16] */
|
||
|
|
+// XRX200_SDMA_CTRL, /* Ethernet Switch StoreDMA Control Register */
|
||
|
|
+// XRX200_SDMA_CTRL_TSTEN, /* Time Stamp Enable */
|
||
|
|
+// XRX200_SDMA_FCTHR1, /* SDMA Flow Control Threshold1 Register */
|
||
|
|
+// XRX200_SDMA_FCTHR1_THR1, /* Threshold 1 */
|
||
|
|
+// XRX200_SDMA_FCTHR2, /* SDMA Flow Control Threshold2 Register */
|
||
|
|
+// XRX200_SDMA_FCTHR2_THR2, /* Threshold 2 */
|
||
|
|
+// XRX200_SDMA_FCTHR3, /* SDMA Flow Control Threshold3 Register */
|
||
|
|
+// XRX200_SDMA_FCTHR3_THR3, /* Threshold 3 */
|
||
|
|
+// XRX200_SDMA_FCTHR4, /* SDMA Flow Control Threshold4 Register */
|
||
|
|
+// XRX200_SDMA_FCTHR4_THR4, /* Threshold 4 */
|
||
|
|
+// XRX200_SDMA_FCTHR5, /* SDMA Flow Control Threshold5 Register */
|
||
|
|
+// XRX200_SDMA_FCTHR5_THR5, /* Threshold 5 */
|
||
|
|
+// XRX200_SDMA_FCTHR6, /* SDMA Flow Control Threshold6 Register */
|
||
|
|
+// XRX200_SDMA_FCTHR6_THR6, /* Threshold 6 */
|
||
|
|
+// XRX200_SDMA_FCTHR7, /* SDMA Flow Control Threshold7 Register */
|
||
|
|
+// XRX200_SDMA_FCTHR7_THR7, /* Threshold 7 */
|
||
|
|
+// XRX200_SDMA_STAT_0, /* SDMA Status Register0 */
|
||
|
|
+// XRX200_SDMA_STAT_0_BPS_FILL, /* Back Pressure Status */
|
||
|
|
+// XRX200_SDMA_STAT_0_BPS_PNT, /* Back Pressure Status */
|
||
|
|
+// XRX200_SDMA_STAT_0_DROP, /* Back Pressure Status */
|
||
|
|
+// XRX200_SDMA_STAT_1, /* SDMA Status Register1 */
|
||
|
|
+// XRX200_SDMA_STAT_1_FILL, /* Buffer Filling Level */
|
||
|
|
+// XRX200_SDMA_STAT_2, /* SDMA Status Register2 */
|
||
|
|
+// XRX200_SDMA_STAT_2_FSMS, /* FSM states status */
|
||
|
|
+// XRX200_SDMA_IER, /* SDMA Interrupt Enable Register */
|
||
|
|
+// XRX200_SDMA_IER_BPEX, /* Buffer Pointers Exceeded */
|
||
|
|
+// XRX200_SDMA_IER_BFULL, /* Buffer Full */
|
||
|
|
+// XRX200_SDMA_IER_FERR, /* Frame Error */
|
||
|
|
+// XRX200_SDMA_IER_FRX, /* Frame Received Successfully */
|
||
|
|
+// XRX200_SDMA_ISR, /* SDMA Interrupt Status Register */
|
||
|
|
+// XRX200_SDMA_ISR_BPEX, /* Packet Descriptors Exceeded */
|
||
|
|
+// XRX200_SDMA_ISR_BFULL, /* Buffer Full */
|
||
|
|
+// XRX200_SDMA_ISR_FERR, /* Frame Error */
|
||
|
|
+// XRX200_SDMA_ISR_FRX, /* Frame Received Successfully */
|
||
|
|
+// XRX200_SDMA_PCTRL, /* Ethernet SwitchStore DMA Port Control Register */
|
||
|
|
+// XRX200_SDMA_PCTRL_DTHR, /* Drop Threshold Selection */
|
||
|
|
+// XRX200_SDMA_PCTRL_PTHR, /* Pause Threshold Selection */
|
||
|
|
+// XRX200_SDMA_PCTRL_PHYEFWD, /* Forward PHY Error Frames */
|
||
|
|
+// XRX200_SDMA_PCTRL_ALGFWD, /* Forward Alignment Error Frames */
|
||
|
|
+// XRX200_SDMA_PCTRL_LENFWD, /* Forward Length Errored Frames */
|
||
|
|
+// XRX200_SDMA_PCTRL_OSFWD, /* Forward Oversized Frames */
|
||
|
|
+// XRX200_SDMA_PCTRL_USFWD, /* Forward Undersized Frames */
|
||
|
|
+// XRX200_SDMA_PCTRL_FCSIGN, /* Ignore FCS Errors */
|
||
|
|
+// XRX200_SDMA_PCTRL_FCSFWD, /* Forward FCS Errored Frames */
|
||
|
|
+// XRX200_SDMA_PCTRL_PAUFWD, /* Pause Frame Forwarding */
|
||
|
|
+// XRX200_SDMA_PCTRL_MFCEN, /* Metering Flow Control Enable */
|
||
|
|
+// XRX200_SDMA_PCTRL_FCEN, /* Flow Control Enable */
|
||
|
|
+// XRX200_SDMA_PCTRL_PEN, /* Port Enable */
|
||
|
|
+// XRX200_SDMA_PRIO, /* Ethernet SwitchStore DMA Port Priority Register */
|
||
|
|
+// XRX200_SDMA_PRIO_PRIO, /* SDMA PRIO */
|
||
|
|
+// XRX200_SDMA_PSTAT0_HDR, /* Ethernet SwitchStore DMA Port Status Register 0 */
|
||
|
|
+// XRX200_SDMA_PSTAT0_HDR_PTR, /* Port Ingress Queue Header Pointer */
|
||
|
|
+// XRX200_SDMA_PSTAT1, /* Ethernet SwitchStore DMA Port Status Register 1 */
|
||
|
|
+// XRX200_SDMA_PSTAT1_PPKT, /* Port Ingress Packet Count */
|
||
|
|
+// XRX200_SDMA_TSTAMP0, /* Ingress TimeStamp Register 0 */
|
||
|
|
+// XRX200_SDMA_TSTAMP0_TSTL, /* Time Stamp [15:0] */
|
||
|
|
+// XRX200_SDMA_TSTAMP1, /* Ingress TimeStamp Register 1 */
|
||
|
|
+// XRX200_SDMA_TSTAMP1_TSTH, /* Time Stamp [31:16] */
|
||
|
|
+};
|
||
|
|
+
|
||
|
|
+
|
||
|
|
+struct xrx200sw_reg {
|
||
|
|
+ int offset;
|
||
|
|
+ int shift;
|
||
|
|
+ int size;
|
||
|
|
+ int mult;
|
||
|
|
+} xrx200sw_reg[] = {
|
||
|
|
+// offeset shift size mult
|
||
|
|
+// {0x0000, 0, 16, 0x00}, /* XRX200_ETHSW_SWRES Ethernet Switch ResetControl Register */
|
||
|
|
+// {0x0000, 1, 1, 0x00}, /* XRX200_ETHSW_SWRES_R1 Hardware Reset */
|
||
|
|
+// {0x0000, 0, 1, 0x00}, /* XRX200_ETHSW_SWRES_R0 Register Configuration */
|
||
|
|
+// {0x0004, 0, 16, 0x00}, /* XRX200_ETHSW_CLK_MAC_GAT Ethernet Switch Clock ControlRegister */
|
||
|
|
+// {0x0004, 12, 4, 0x00}, /* XRX200_ETHSW_CLK_EXP_SLEEP Exponent to put system into sleep */
|
||
|
|
+// {0x0004, 8, 4, 0x00}, /* XRX200_ETHSW_CLK_EXP_WAKE Exponent to wake up system */
|
||
|
|
+// {0x0004, 7, 1, 0x00}, /* XRX200_ETHSW_CLK_CLK2_EN CLK2 Input for MAC */
|
||
|
|
+// {0x0004, 6, 1, 0x00}, /* XRX200_ETHSW_CLK_EXT_DIV_EN External Clock Divider Enable */
|
||
|
|
+// {0x0004, 5, 1, 0x00}, /* XRX200_ETHSW_CLK_RAM_DBG_EN Clock Gating Enable */
|
||
|
|
+// {0x0004, 4, 1, 0x00}, /* XRX200_ETHSW_CLK_REG_GAT_EN Clock Gating Enable */
|
||
|
|
+// {0x0004, 3, 1, 0x00}, /* XRX200_ETHSW_CLK_GAT_EN Clock Gating Enable */
|
||
|
|
+// {0x0004, 2, 1, 0x00}, /* XRX200_ETHSW_CLK_MAC_GAT_EN Clock Gating Enable */
|
||
|
|
+// {0x0008, 0, 16, 0x00}, /* XRX200_ETHSW_DBG_STEP Ethernet Switch Debug ControlRegister */
|
||
|
|
+// {0x0008, 12, 4, 0x00}, /* XRX200_ETHSW_DBG_CLK_SEL Trigger Enable */
|
||
|
|
+// {0x0008, 11, 1, 0x00}, /* XRX200_ETHSW_DBG_MON_EN Monitoring Enable */
|
||
|
|
+// {0x0008, 9, 2, 0x00}, /* XRX200_ETHSW_DBG_TRIG_EN Trigger Enable */
|
||
|
|
+// {0x0008, 8, 1, 0x00}, /* XRX200_ETHSW_DBG_MODE Debug Mode */
|
||
|
|
+// {0x0008, 0, 8, 0x00}, /* XRX200_ETHSW_DBG_STEP_TIME Clock Step Size */
|
||
|
|
+// {0x000C, 0, 16, 0x00}, /* XRX200_ETHSW_SSB_MODE Ethernet Switch SharedSegment Buffer Mode Register */
|
||
|
|
+// {0x000C, 2, 4, 0x00}, /* XRX200_ETHSW_SSB_MODE_ADDE Memory Address */
|
||
|
|
+// {0x000C, 0, 2, 0x00}, /* XRX200_ETHSW_SSB_MODE_MODE Memory Access Mode */
|
||
|
|
+// {0x0010, 0, 16, 0x00}, /* XRX200_ETHSW_SSB_ADDR Ethernet Switch SharedSegment Buffer Address Register */
|
||
|
|
+// {0x0010, 0, 16, 0x00}, /* XRX200_ETHSW_SSB_ADDR_ADDE Memory Address */
|
||
|
|
+// {0x0014, 0, 16, 0x00}, /* XRX200_ETHSW_SSB_DATA Ethernet Switch SharedSegment Buffer Data Register */
|
||
|
|
+// {0x0014, 0, 16, 0x00}, /* XRX200_ETHSW_SSB_DATA_DATA Data Value */
|
||
|
|
+// {0x0018, 0, 16, 0x00}, /* XRX200_ETHSW_CAP_0 Ethernet Switch CapabilityRegister 0 */
|
||
|
|
+// {0x0018, 0, 16, 0x00}, /* XRX200_ETHSW_CAP_0_SPEED Clock frequency */
|
||
|
|
+// {0x001C, 0, 16, 0x00}, /* XRX200_ETHSW_CAP_1 Ethernet Switch CapabilityRegister 1 */
|
||
|
|
+// {0x001C, 15, 1, 0x00}, /* XRX200_ETHSW_CAP_1_GMAC MAC operation mode */
|
||
|
|
+// {0x001C, 8, 7, 0x00}, /* XRX200_ETHSW_CAP_1_QUEUE Number of queues */
|
||
|
|
+// {0x001C, 4, 4, 0x00}, /* XRX200_ETHSW_CAP_1_VPORTS Number of virtual ports */
|
||
|
|
+// {0x001C, 0, 4, 0x00}, /* XRX200_ETHSW_CAP_1_PPORTS Number of physical ports */
|
||
|
|
+// {0x0020, 0, 16, 0x00}, /* XRX200_ETHSW_CAP_2 Ethernet Switch CapabilityRegister 2 */
|
||
|
|
+// {0x0020, 0, 11, 0x00}, /* XRX200_ETHSW_CAP_2_PACKETS Number of packets */
|
||
|
|
+// {0x0024, 0, 16, 0x00}, /* XRX200_ETHSW_CAP_3 Ethernet Switch CapabilityRegister 3 */
|
||
|
|
+// {0x0024, 8, 8, 0x00}, /* XRX200_ETHSW_CAP_3_METERS Number of traffic meters */
|
||
|
|
+// {0x0024, 0, 8, 0x00}, /* XRX200_ETHSW_CAP_3_SHAPERS Number of traffic shapers */
|
||
|
|
+// {0x0028, 0, 16, 0x00}, /* XRX200_ETHSW_CAP_4 Ethernet Switch CapabilityRegister 4 */
|
||
|
|
+// {0x0028, 8, 8, 0x00}, /* XRX200_ETHSW_CAP_4_PPPOE PPPoE table size */
|
||
|
|
+// {0x0028, 0, 8, 0x00}, /* XRX200_ETHSW_CAP_4_VLAN Active VLAN table size */
|
||
|
|
+// {0x002C, 0, 16, 0x00}, /* XRX200_ETHSW_CAP_5 Ethernet Switch CapabilityRegister 5 */
|
||
|
|
+// {0x002C, 8, 8, 0x00}, /* XRX200_ETHSW_CAP_5_IPPLEN IP packet length table size */
|
||
|
|
+// {0x002C, 0, 8, 0x00}, /* XRX200_ETHSW_CAP_5_PROT Protocol table size */
|
||
|
|
+// {0x0030, 0, 16, 0x00}, /* XRX200_ETHSW_CAP_6 Ethernet Switch CapabilityRegister 6 */
|
||
|
|
+// {0x0030, 8, 8, 0x00}, /* XRX200_ETHSW_CAP_6_MACDASA MAC DA/SA table size */
|
||
|
|
+// {0x0030, 0, 8, 0x00}, /* XRX200_ETHSW_CAP_6_APPL Application table size */
|
||
|
|
+// {0x0034, 0, 16, 0x00}, /* XRX200_ETHSW_CAP_7 Ethernet Switch CapabilityRegister 7 */
|
||
|
|
+// {0x0034, 8, 8, 0x00}, /* XRX200_ETHSW_CAP_7_IPDASAM IP DA/SA MSB table size */
|
||
|
|
+// {0x0034, 0, 8, 0x00}, /* XRX200_ETHSW_CAP_7_IPDASAL IP DA/SA LSB table size */
|
||
|
|
+// {0x0038, 0, 16, 0x00}, /* XRX200_ETHSW_CAP_8 Ethernet Switch CapabilityRegister 8 */
|
||
|
|
+// {0x0038, 0, 8, 0x00}, /* XRX200_ETHSW_CAP_8_MCAST Multicast table size */
|
||
|
|
+// {0x003C, 0, 16, 0x00}, /* XRX200_ETHSW_CAP_9 Ethernet Switch CapabilityRegister 9 */
|
||
|
|
+// {0x003C, 0, 8, 0x00}, /* XRX200_ETHSW_CAP_9_FLAGG Flow Aggregation table size */
|
||
|
|
+// {0x0040, 0, 16, 0x00}, /* XRX200_ETHSW_CAP_10 Ethernet Switch CapabilityRegister 10 */
|
||
|
|
+// {0x0040, 0, 13, 0x00}, /* XRX200_ETHSW_CAP_10_MACBT MAC bridging table size */
|
||
|
|
+// {0x0044, 0, 16, 0x00}, /* XRX200_ETHSW_CAP_11 Ethernet Switch CapabilityRegister 11 */
|
||
|
|
+// {0x0044, 0, 16, 0x00}, /* XRX200_ETHSW_CAP_11_BSIZEL Packet buffer size (lower part, in byte) */
|
||
|
|
+// {0x0048, 0, 16, 0x00}, /* XRX200_ETHSW_CAP_12 Ethernet Switch CapabilityRegister 12 */
|
||
|
|
+// {0x0048, 0, 3, 0x00}, /* XRX200_ETHSW_CAP_12_BSIZEH Packet buffer size (higher part, in byte) */
|
||
|
|
+// {0x004C, 0, 16, 0x00}, /* XRX200_ETHSW_VERSION_REV Ethernet Switch VersionRegister */
|
||
|
|
+// {0x004C, 8, 8, 0x00}, /* XRX200_ETHSW_VERSION_MOD_ID Module Identification */
|
||
|
|
+// {0x004C, 0, 8, 0x00}, /* XRX200_ETHSW_VERSION_REV_ID Hardware Revision Identification */
|
||
|
|
+// {0x0050, 0, 16, 0x00}, /* XRX200_ETHSW_IER Interrupt Enable Register */
|
||
|
|
+// {0x0050, 4, 1, 0x00}, /* XRX200_ETHSW_IER_FDMAIE Fetch DMA Interrupt Enable */
|
||
|
|
+// {0x0050, 3, 1, 0x00}, /* XRX200_ETHSW_IER_SDMAIE Store DMA Interrupt Enable */
|
||
|
|
+// {0x0050, 2, 1, 0x00}, /* XRX200_ETHSW_IER_MACIE Ethernet MAC Interrupt Enable */
|
||
|
|
+// {0x0050, 1, 1, 0x00}, /* XRX200_ETHSW_IER_PCEIE Parser and Classification Engine Interrupt Enable */
|
||
|
|
+// {0x0050, 0, 1, 0x00}, /* XRX200_ETHSW_IER_BMIE Buffer Manager Interrupt Enable */
|
||
|
|
+// {0x0054, 0, 16, 0x00}, /* XRX200_ETHSW_ISR Interrupt Status Register */
|
||
|
|
+// {0x0054, 4, 1, 0x00}, /* XRX200_ETHSW_ISR_FDMAINT Fetch DMA Interrupt */
|
||
|
|
+// {0x0054, 3, 1, 0x00}, /* XRX200_ETHSW_ISR_SDMAINT Store DMA Interrupt */
|
||
|
|
+// {0x0054, 2, 1, 0x00}, /* XRX200_ETHSW_ISR_MACINT Ethernet MAC Interrupt */
|
||
|
|
+// {0x0054, 1, 1, 0x00}, /* XRX200_ETHSW_ISR_PCEINT Parser and Classification Engine Interrupt */
|
||
|
|
+// {0x0054, 0, 1, 0x00}, /* XRX200_ETHSW_ISR_BMINT Buffer Manager Interrupt */
|
||
|
|
+// {0x0058, 0, 16, 0x00}, /* XRX200_ETHSW_SPARE_0 Ethernet Switch SpareCells 0 */
|
||
|
|
+// {0x0058, 0, 16, 0x00}, /* XRX200_ETHSW_SPARE_0_SPARE SPARE0 */
|
||
|
|
+// {0x005C, 0, 16, 0x00}, /* XRX200_ETHSW_SPARE_1 Ethernet Switch SpareCells 1 */
|
||
|
|
+// {0x005C, 0, 16, 0x00}, /* XRX200_ETHSW_SPARE_1_SPARE SPARE1 */
|
||
|
|
+// {0x0060, 0, 16, 0x00}, /* XRX200_ETHSW_SPARE_2 Ethernet Switch SpareCells 2 */
|
||
|
|
+// {0x0060, 0, 16, 0x00}, /* XRX200_ETHSW_SPARE_2_SPARE SPARE2 */
|
||
|
|
+// {0x0064, 0, 16, 0x00}, /* XRX200_ETHSW_SPARE_3 Ethernet Switch SpareCells 3 */
|
||
|
|
+// {0x0064, 0, 16, 0x00}, /* XRX200_ETHSW_SPARE_3_SPARE SPARE3 */
|
||
|
|
+// {0x0068, 0, 16, 0x00}, /* XRX200_ETHSW_SPARE_4 Ethernet Switch SpareCells 4 */
|
||
|
|
+// {0x0068, 0, 16, 0x00}, /* XRX200_ETHSW_SPARE_4_SPARE SPARE4 */
|
||
|
|
+// {0x006C, 0, 16, 0x00}, /* XRX200_ETHSW_SPARE_5 Ethernet Switch SpareCells 5 */
|
||
|
|
+// {0x006C, 0, 16, 0x00}, /* XRX200_ETHSW_SPARE_5_SPARE SPARE5 */
|
||
|
|
+// {0x0070, 0, 16, 0x00}, /* XRX200_ETHSW_SPARE_6 Ethernet Switch SpareCells 6 */
|
||
|
|
+// {0x0070, 0, 16, 0x00}, /* XRX200_ETHSW_SPARE_6_SPARE SPARE6 */
|
||
|
|
+// {0x0074, 0, 16, 0x00}, /* XRX200_ETHSW_SPARE_7 Ethernet Switch SpareCells 7 */
|
||
|
|
+// {0x0074, 0, 16, 0x00}, /* XRX200_ETHSW_SPARE_7_SPARE SPARE7 */
|
||
|
|
+// {0x0078, 0, 16, 0x00}, /* XRX200_ETHSW_SPARE_8 Ethernet Switch SpareCells 8 */
|
||
|
|
+// {0x0078, 0, 16, 0x00}, /* XRX200_ETHSW_SPARE_8_SPARE SPARE8 */
|
||
|
|
+// {0x007C, 0, 16, 0x00}, /* XRX200_ETHSW_SPARE_9 Ethernet Switch SpareCells 9 */
|
||
|
|
+// {0x007C, 0, 16, 0x00}, /* XRX200_ETHSW_SPARE_9_SPARE SPARE9 */
|
||
|
|
+// {0x0080, 0, 16, 0x00}, /* XRX200_ETHSW_SPARE_10 Ethernet Switch SpareCells 10 */
|
||
|
|
+// {0x0080, 0, 16, 0x00}, /* XRX200_ETHSW_SPARE_10_SPARE SPARE10 */
|
||
|
|
+// {0x0084, 0, 16, 0x00}, /* XRX200_ETHSW_SPARE_11 Ethernet Switch SpareCells 11 */
|
||
|
|
+// {0x0084, 0, 16, 0x00}, /* XRX200_ETHSW_SPARE_11_SPARE SPARE11 */
|
||
|
|
+// {0x0088, 0, 16, 0x00}, /* XRX200_ETHSW_SPARE_12 Ethernet Switch SpareCells 12 */
|
||
|
|
+// {0x0088, 0, 16, 0x00}, /* XRX200_ETHSW_SPARE_12_SPARE SPARE12 */
|
||
|
|
+// {0x008C, 0, 16, 0x00}, /* XRX200_ETHSW_SPARE_13 Ethernet Switch SpareCells 13 */
|
||
|
|
+// {0x008C, 0, 16, 0x00}, /* XRX200_ETHSW_SPARE_13_SPARE SPARE13 */
|
||
|
|
+// {0x0090, 0, 16, 0x00}, /* XRX200_ETHSW_SPARE_14 Ethernet Switch SpareCells 14 */
|
||
|
|
+// {0x0090, 0, 16, 0x00}, /* XRX200_ETHSW_SPARE_14_SPARE SPARE14 */
|
||
|
|
+// {0x0094, 0, 16, 0x00}, /* XRX200_ETHSW_SPARE_15 Ethernet Switch SpareCells 15 */
|
||
|
|
+// {0x0094, 0, 16, 0x00}, /* XRX200_ETHSW_SPARE_15_SPARE SPARE15 */
|
||
|
|
+// {0x0100, 0, 16, 0x00}, /* XRX200_BM_RAM_VAL_3 RAM Value Register 3 */
|
||
|
|
+// {0x0100, 0, 16, 0x00}, /* XRX200_BM_RAM_VAL_3_VAL3 Data value [15:0] */
|
||
|
|
+// {0x0104, 0, 16, 0x00}, /* XRX200_BM_RAM_VAL_2 RAM Value Register 2 */
|
||
|
|
+// {0x0104, 0, 16, 0x00}, /* XRX200_BM_RAM_VAL_2_VAL2 Data value [15:0] */
|
||
|
|
+// {0x0108, 0, 16, 0x00}, /* XRX200_BM_RAM_VAL_1 RAM Value Register 1 */
|
||
|
|
+// {0x0108, 0, 16, 0x00}, /* XRX200_BM_RAM_VAL_1_VAL1 Data value [15:0] */
|
||
|
|
+// {0x010C, 0, 16, 0x00}, /* XRX200_BM_RAM_VAL_0 RAM Value Register 0 */
|
||
|
|
+// {0x010C, 0, 16, 0x00}, /* XRX200_BM_RAM_VAL_0_VAL0 Data value [15:0] */
|
||
|
|
+// {0x0110, 0, 16, 0x00}, /* XRX200_BM_RAM_ADDR RAM Address Register */
|
||
|
|
+// {0x0110, 0, 11, 0x00}, /* XRX200_BM_RAM_ADDR_ADDR RAM Address */
|
||
|
|
+// {0x0114, 0, 16, 0x00}, /* XRX200_BM_RAM_CTRL RAM Access Control Register */
|
||
|
|
+// {0x0114, 15, 1, 0x00}, /* XRX200_BM_RAM_CTRL_BAS Access Busy/Access Start */
|
||
|
|
+// {0x0114, 5, 1, 0x00}, /* XRX200_BM_RAM_CTRL_OPMOD Lookup Table Access Operation Mode */
|
||
|
|
+// {0x0114, 0, 5, 0x00}, /* XRX200_BM_RAM_CTRL_ADDR Address for RAM selection */
|
||
|
|
+// {0x0118, 0, 16, 0x00}, /* XRX200_BM_FSQM_GCTRL Free Segment Queue ManagerGlobal Control Register */
|
||
|
|
+// {0x0118, 0, 10, 0x00}, /* XRX200_BM_FSQM_GCTRL_SEGNUM Maximum Segment Number */
|
||
|
|
+// {0x011C, 0, 16, 0x00}, /* XRX200_BM_CONS_SEG Number of Consumed SegmentsRegister */
|
||
|
|
+// {0x011C, 0, 10, 0x00}, /* XRX200_BM_CONS_SEG_FSEG Number of Consumed Segments */
|
||
|
|
+// {0x0120, 0, 16, 0x00}, /* XRX200_BM_CONS_PKT Number of Consumed PacketPointers Register */
|
||
|
|
+// {0x0120, 0, 11, 0x00}, /* XRX200_BM_CONS_PKT_FQP Number of Consumed Packet Pointers */
|
||
|
|
+// {0x0124, 0, 16, 0x00}, /* XRX200_BM_GCTRL_F Buffer Manager Global ControlRegister 0 */
|
||
|
|
+// {0x0124, 13, 1, 0x00}, /* XRX200_BM_GCTRL_BM_STA Buffer Manager Initialization Status Bit */
|
||
|
|
+// {0x0124, 12, 1, 0x00}, /* XRX200_BM_GCTRL_SAT RMON Counter Update Mode */
|
||
|
|
+// {0x0124, 11, 1, 0x00}, /* XRX200_BM_GCTRL_FR_RBC Freeze RMON RX Bad Byte 64 Bit Counter */
|
||
|
|
+// {0x0124, 10, 1, 0x00}, /* XRX200_BM_GCTRL_FR_RGC Freeze RMON RX Good Byte 64 Bit Counter */
|
||
|
|
+// {0x0124, 9, 1, 0x00}, /* XRX200_BM_GCTRL_FR_TGC Freeze RMON TX Good Byte 64 Bit Counter */
|
||
|
|
+// {0x0124, 8, 1, 0x00}, /* XRX200_BM_GCTRL_I_FIN RAM initialization finished */
|
||
|
|
+// {0x0124, 7, 1, 0x00}, /* XRX200_BM_GCTRL_CX_INI PQM Context RAM initialization */
|
||
|
|
+// {0x0124, 6, 1, 0x00}, /* XRX200_BM_GCTRL_FP_INI FPQM RAM initialization */
|
||
|
|
+// {0x0124, 5, 1, 0x00}, /* XRX200_BM_GCTRL_FS_INI FSQM RAM initialization */
|
||
|
|
+// {0x0124, 4, 1, 0x00}, /* XRX200_BM_GCTRL_R_SRES Software Reset for RMON */
|
||
|
|
+// {0x0124, 3, 1, 0x00}, /* XRX200_BM_GCTRL_S_SRES Software Reset for Scheduler */
|
||
|
|
+// {0x0124, 2, 1, 0x00}, /* XRX200_BM_GCTRL_A_SRES Software Reset for AVG */
|
||
|
|
+// {0x0124, 1, 1, 0x00}, /* XRX200_BM_GCTRL_P_SRES Software Reset for PQM */
|
||
|
|
+// {0x0124, 0, 1, 0x00}, /* XRX200_BM_GCTRL_F_SRES Software Reset for FSQM */
|
||
|
|
+// {0x0128, 0, 16, 0x00}, /* XRX200_BM_QUEUE_GCTRL Queue Manager GlobalControl Register 0 */
|
||
|
|
+// {0x0128, 10, 1, 0x00}, /* XRX200_BM_QUEUE_GCTRL_GL_MOD WRED Mode Signal */
|
||
|
|
+// {0x0128, 7, 3, 0x00}, /* XRX200_BM_QUEUE_GCTRL_AQUI Average Queue Update Interval */
|
||
|
|
+// {0x0128, 3, 4, 0x00}, /* XRX200_BM_QUEUE_GCTRL_AQWF Average Queue Weight Factor */
|
||
|
|
+// {0x0128, 2, 1, 0x00}, /* XRX200_BM_QUEUE_GCTRL_QAVGEN Queue Average Calculation Enable */
|
||
|
|
+// {0x0128, 0, 2, 0x00}, /* XRX200_BM_QUEUE_GCTRL_DPROB Drop Probability Profile */
|
||
|
|
+// {0x012C, 0, 16, 0x00}, /* XRX200_BM_WRED_RTH_0 WRED Red Threshold Register0 */
|
||
|
|
+// {0x012C, 0, 10, 0x00}, /* XRX200_BM_WRED_RTH_0_MINTH Minimum Threshold */
|
||
|
|
+// {0x0130, 0, 16, 0x00}, /* XRX200_BM_WRED_RTH_1 WRED Red Threshold Register1 */
|
||
|
|
+// {0x0130, 0, 10, 0x00}, /* XRX200_BM_WRED_RTH_1_MAXTH Maximum Threshold */
|
||
|
|
+// {0x0134, 0, 16, 0x00}, /* XRX200_BM_WRED_YTH_0 WRED Yellow ThresholdRegister 0 */
|
||
|
|
+// {0x0134, 0, 10, 0x00}, /* XRX200_BM_WRED_YTH_0_MINTH Minimum Threshold */
|
||
|
|
+// {0x0138, 0, 16, 0x00}, /* XRX200_BM_WRED_YTH_1 WRED Yellow ThresholdRegister 1 */
|
||
|
|
+// {0x0138, 0, 10, 0x00}, /* XRX200_BM_WRED_YTH_1_MAXTH Maximum Threshold */
|
||
|
|
+// {0x013C, 0, 16, 0x00}, /* XRX200_BM_WRED_GTH_0 WRED Green ThresholdRegister 0 */
|
||
|
|
+// {0x013C, 0, 10, 0x00}, /* XRX200_BM_WRED_GTH_0_MINTH Minimum Threshold */
|
||
|
|
+// {0x0140, 0, 16, 0x00}, /* XRX200_BM_WRED_GTH_1 WRED Green ThresholdRegister 1 */
|
||
|
|
+// {0x0140, 0, 10, 0x00}, /* XRX200_BM_WRED_GTH_1_MAXTH Maximum Threshold */
|
||
|
|
+// {0x0144, 0, 16, 0x00}, /* XRX200_BM_DROP_GTH_0_THR Drop Threshold ConfigurationRegister 0 */
|
||
|
|
+// {0x0144, 0, 11, 0x00}, /* XRX200_BM_DROP_GTH_0_THR_FQ Threshold for frames marked red */
|
||
|
|
+// {0x0148, 0, 16, 0x00}, /* XRX200_BM_DROP_GTH_1_THY Drop Threshold ConfigurationRegister 1 */
|
||
|
|
+// {0x0148, 0, 11, 0x00}, /* XRX200_BM_DROP_GTH_1_THY_FQ Threshold for frames marked yellow */
|
||
|
|
+// {0x014C, 0, 16, 0x00}, /* XRX200_BM_DROP_GTH_2_THG Drop Threshold ConfigurationRegister 2 */
|
||
|
|
+// {0x014C, 0, 11, 0x00}, /* XRX200_BM_DROP_GTH_2_THG_FQ Threshold for frames marked green */
|
||
|
|
+// {0x0150, 0, 16, 0x00}, /* XRX200_BM_IER Buffer Manager Global InterruptEnable Register */
|
||
|
|
+// {0x0150, 7, 1, 0x00}, /* XRX200_BM_IER_CNT4 Counter Group 4 (RMON-CLASSIFICATION) Interrupt Enable */
|
||
|
|
+// {0x0150, 6, 1, 0x00}, /* XRX200_BM_IER_CNT3 Counter Group 3 (RMON-PQM) Interrupt Enable */
|
||
|
|
+// {0x0150, 5, 1, 0x00}, /* XRX200_BM_IER_CNT2 Counter Group 2 (RMON-SCHEDULER) Interrupt Enable */
|
||
|
|
+// {0x0150, 4, 1, 0x00}, /* XRX200_BM_IER_CNT1 Counter Group 1 (RMON-QFETCH) Interrupt Enable */
|
||
|
|
+// {0x0150, 3, 1, 0x00}, /* XRX200_BM_IER_CNT0 Counter Group 0 (RMON-QSTOR) Interrupt Enable */
|
||
|
|
+// {0x0150, 2, 1, 0x00}, /* XRX200_BM_IER_DEQ PQM dequeue Interrupt Enable */
|
||
|
|
+// {0x0150, 1, 1, 0x00}, /* XRX200_BM_IER_ENQ PQM Enqueue Interrupt Enable */
|
||
|
|
+// {0x0150, 0, 1, 0x00}, /* XRX200_BM_IER_FSQM Buffer Empty Interrupt Enable */
|
||
|
|
+// {0x0154, 0, 16, 0x00}, /* XRX200_BM_ISR Buffer Manager Global InterruptStatus Register */
|
||
|
|
+// {0x0154, 7, 1, 0x00}, /* XRX200_BM_ISR_CNT4 Counter Group 4 Interrupt */
|
||
|
|
+// {0x0154, 6, 1, 0x00}, /* XRX200_BM_ISR_CNT3 Counter Group 3 Interrupt */
|
||
|
|
+// {0x0154, 5, 1, 0x00}, /* XRX200_BM_ISR_CNT2 Counter Group 2 Interrupt */
|
||
|
|
+// {0x0154, 4, 1, 0x00}, /* XRX200_BM_ISR_CNT1 Counter Group 1 Interrupt */
|
||
|
|
+// {0x0154, 3, 1, 0x00}, /* XRX200_BM_ISR_CNT0 Counter Group 0 Interrupt */
|
||
|
|
+// {0x0154, 2, 1, 0x00}, /* XRX200_BM_ISR_DEQ PQM dequeue Interrupt Enable */
|
||
|
|
+// {0x0154, 1, 1, 0x00}, /* XRX200_BM_ISR_ENQ PQM Enqueue Interrupt */
|
||
|
|
+// {0x0154, 0, 1, 0x00}, /* XRX200_BM_ISR_FSQM Buffer Empty Interrupt */
|
||
|
|
+// {0x0158, 0, 16, 0x00}, /* XRX200_BM_CISEL Buffer Manager RMON CounterInterrupt Select Register */
|
||
|
|
+// {0x0158, 0, 3, 0x00}, /* XRX200_BM_CISEL_PORT Port Number */
|
||
|
|
+// {0x015C, 0, 16, 0x00}, /* XRX200_BM_DEBUG_CTRL_DBG Debug Control Register */
|
||
|
|
+// {0x015C, 0, 8, 0x00}, /* XRX200_BM_DEBUG_CTRL_DBG_SEL Select Signal for Debug Multiplexer */
|
||
|
|
+// {0x0160, 0, 16, 0x00}, /* XRX200_BM_DEBUG_VAL_DBG Debug Value Register */
|
||
|
|
+// {0x0160, 0, 16, 0x00}, /* XRX200_BM_DEBUG_VAL_DBG_DAT Debug Data Value */
|
||
|
|
+// {0x0200, 0, 16, 0x08}, /* XRX200_BM_PCFG Buffer Manager PortConfiguration Register */
|
||
|
|
+// {0x0200, 0, 1, 0x08}, /* XRX200_BM_PCFG_CNTEN RMON Counter Enable */
|
||
|
|
+// {0x0204, 0, 16, 0x08}, /* XRX200_BM_RMON_CTRL_RAM1 Buffer ManagerRMON Control Register */
|
||
|
|
+// {0x0204, 1, 1, 0x08}, /* XRX200_BM_RMON_CTRL_RAM2_RES Software Reset for RMON RAM2 */
|
||
|
|
+// {0x0204, 0, 1, 0x08}, /* XRX200_BM_RMON_CTRL_RAM1_RES Software Reset for RMON RAM1 */
|
||
|
|
+// {0x0400, 0, 16, 0x08}, /* XRX200_PQM_DP Packet Queue ManagerDrop Probability Register */
|
||
|
|
+// {0x0400, 0, 2, 0x08}, /* XRX200_PQM_DP_DPROB Drop Probability Profile */
|
||
|
|
+// {0x0404, 0, 16, 0x08}, /* XRX200_PQM_RS Packet Queue ManagerRate Shaper Assignment Register */
|
||
|
|
+// {0x0404, 15, 1, 0x08}, /* XRX200_PQM_RS_EN2 Rate Shaper 2 Enable */
|
||
|
|
+// {0x0404, 8, 6, 0x08}, /* XRX200_PQM_RS_RS2 Rate Shaper 2 */
|
||
|
|
+// {0x0404, 7, 1, 0x08}, /* XRX200_PQM_RS_EN1 Rate Shaper 1 Enable */
|
||
|
|
+// {0x0404, 0, 6, 0x08}, /* XRX200_PQM_RS_RS1 Rate Shaper 1 */
|
||
|
|
+// {0x0500, 0, 16, 0x14}, /* XRX200_RS_CTRL Rate Shaper ControlRegister */
|
||
|
|
+// {0x0500, 0, 1, 0x14}, /* XRX200_RS_CTRL_RSEN Rate Shaper Enable */
|
||
|
|
+// {0x0504, 0, 16, 0x14}, /* XRX200_RS_CBS Rate Shaper CommittedBurst Size Register */
|
||
|
|
+// {0x0504, 0, 10, 0x14}, /* XRX200_RS_CBS_CBS Committed Burst Size */
|
||
|
|
+// {0x0508, 0, 16, 0x14}, /* XRX200_RS_IBS Rate Shaper InstantaneousBurst Size Register */
|
||
|
|
+// {0x0508, 0, 2, 0x14}, /* XRX200_RS_IBS_IBS Instantaneous Burst Size */
|
||
|
|
+// {0x050C, 0, 16, 0x14}, /* XRX200_RS_CIR_EXP Rate Shaper RateExponent Register */
|
||
|
|
+// {0x050C, 0, 4, 0x14}, /* XRX200_RS_CIR_EXP_EXP Exponent */
|
||
|
|
+// {0x0510, 0, 16, 0x14}, /* XRX200_RS_CIR_MANT Rate Shaper RateMantissa Register */
|
||
|
|
+// {0x0510, 0, 10, 0x14}, /* XRX200_RS_CIR_MANT_MANT Mantissa */
|
||
|
|
+ {0x1100, 0, 16, 0x00}, /* XRX200_PCE_TBL_KEY_7 Table Key Data 7 */
|
||
|
|
+// {0x1100, 0, 16, 0x00}, /* XRX200_PCE_TBL_KEY_7_KEY7 Key Value[15:0] */
|
||
|
|
+ {0x1104, 0, 16, 0x00}, /* XRX200_PCE_TBL_KEY_6 Table Key Data 6 */
|
||
|
|
+// {0x1104, 0, 16, 0x00}, /* XRX200_PCE_TBL_KEY_6_KEY6 Key Value[15:0] */
|
||
|
|
+ {0x1108, 0, 16, 0x00}, /* XRX200_PCE_TBL_KEY_5 Table Key Data 5 */
|
||
|
|
+// {0x1108, 0, 16, 0x00}, /* XRX200_PCE_TBL_KEY_5_KEY5 Key Value[15:0] */
|
||
|
|
+ {0x110C, 0, 16, 0x00}, /* XRX200_PCE_TBL_KEY_4 Table Key Data 4 */
|
||
|
|
+// {0x110C, 0, 16, 0x00}, /* XRX200_PCE_TBL_KEY_4_KEY4 Key Value[15:0] */
|
||
|
|
+ {0x1110, 0, 16, 0x00}, /* XRX200_PCE_TBL_KEY_3 Table Key Data 3 */
|
||
|
|
+// {0x1110, 0, 16, 0x00}, /* XRX200_PCE_TBL_KEY_3_KEY3 Key Value[15:0] */
|
||
|
|
+ {0x1114, 0, 16, 0x00}, /* XRX200_PCE_TBL_KEY_2 Table Key Data 2 */
|
||
|
|
+// {0x1114, 0, 16, 0x00}, /* XRX200_PCE_TBL_KEY_2_KEY2 Key Value[15:0] */
|
||
|
|
+ {0x1118, 0, 16, 0x00}, /* XRX200_PCE_TBL_KEY_1 Table Key Data 1 */
|
||
|
|
+// {0x1118, 0, 16, 0x00}, /* XRX200_PCE_TBL_KEY_1_KEY1 Key Value[31:16] */
|
||
|
|
+ {0x111C, 0, 16, 0x00}, /* XRX200_PCE_TBL_KEY_0 Table Key Data 0 */
|
||
|
|
+// {0x111C, 0, 16, 0x00}, /* XRX200_PCE_TBL_KEY_0_KEY0 Key Value[15:0] */
|
||
|
|
+ {0x1120, 0, 16, 0x00}, /* XRX200_PCE_TBL_MASK_0 Table Mask Write Register0 */
|
||
|
|
+// {0x1120, 0, 16, 0x00}, /* XRX200_PCE_TBL_MASK_0_MASK0 Mask Pattern [15:0] */
|
||
|
|
+ {0x1124, 0, 16, 0x00}, /* XRX200_PCE_TBL_VAL_4 Table Value Register4 */
|
||
|
|
+// {0x1124, 0, 16, 0x00}, /* XRX200_PCE_TBL_VAL_4_VAL4 Data value [15:0] */
|
||
|
|
+ {0x1128, 0, 16, 0x00}, /* XRX200_PCE_TBL_VAL_3 Table Value Register3 */
|
||
|
|
+// {0x1128, 0, 16, 0x00}, /* XRX200_PCE_TBL_VAL_3_VAL3 Data value [15:0] */
|
||
|
|
+ {0x112C, 0, 16, 0x00}, /* XRX200_PCE_TBL_VAL_2 Table Value Register2 */
|
||
|
|
+// {0x112C, 0, 16, 0x00}, /* XRX200_PCE_TBL_VAL_2_VAL2 Data value [15:0] */
|
||
|
|
+ {0x1130, 0, 16, 0x00}, /* XRX200_PCE_TBL_VAL_1 Table Value Register1 */
|
||
|
|
+// {0x1130, 0, 16, 0x00}, /* XRX200_PCE_TBL_VAL_1_VAL1 Data value [15:0] */
|
||
|
|
+ {0x1134, 0, 16, 0x00}, /* XRX200_PCE_TBL_VAL_0 Table Value Register0 */
|
||
|
|
+// {0x1134, 0, 16, 0x00}, /* XRX200_PCE_TBL_VAL_0_VAL0 Data value [15:0] */
|
||
|
|
+// {0x1138, 0, 16, 0x00}, /* XRX200_PCE_TBL_ADDR Table Entry AddressRegister */
|
||
|
|
+ {0x1138, 0, 11, 0x00}, /* XRX200_PCE_TBL_ADDR_ADDR Table Address */
|
||
|
|
+// {0x113C, 0, 16, 0x00}, /* XRX200_PCE_TBL_CTRL Table Access ControlRegister */
|
||
|
|
+ {0x113C, 15, 1, 0x00}, /* XRX200_PCE_TBL_CTRL_BAS Access Busy/Access Start */
|
||
|
|
+ {0x113C, 13, 1, 0x00}, /* XRX200_PCE_TBL_CTRL_TYPE Lookup Entry Type */
|
||
|
|
+ {0x113C, 12, 1, 0x00}, /* XRX200_PCE_TBL_CTRL_VLD Lookup Entry Valid */
|
||
|
|
+ {0x113C, 7, 4, 0x00}, /* XRX200_PCE_TBL_CTRL_GMAP Group Map */
|
||
|
|
+ {0x113C, 5, 2, 0x00}, /* XRX200_PCE_TBL_CTRL_OPMOD Lookup Table Access Operation Mode */
|
||
|
|
+ {0x113C, 0, 5, 0x00}, /* XRX200_PCE_TBL_CTRL_ADDR Lookup Table Address */
|
||
|
|
+// {0x1140, 0, 16, 0x00}, /* XRX200_PCE_TBL_STAT Table General StatusRegister */
|
||
|
|
+// {0x1140, 2, 1, 0x00}, /* XRX200_PCE_TBL_STAT_TBUSY Table Access Busy */
|
||
|
|
+// {0x1140, 1, 1, 0x00}, /* XRX200_PCE_TBL_STAT_TEMPT Table Empty */
|
||
|
|
+// {0x1140, 0, 1, 0x00}, /* XRX200_PCE_TBL_STAT_TFUL Table Full */
|
||
|
|
+// {0x1144, 0, 16, 0x00}, /* XRX200_PCE_AGE_0 Aging Counter ConfigurationRegister 0 */
|
||
|
|
+// {0x1144, 0, 4, 0x00}, /* XRX200_PCE_AGE_0_EXP Aging Counter Exponent Value */
|
||
|
|
+// {0x1148, 0, 16, 0x00}, /* XRX200_PCE_AGE_1 Aging Counter ConfigurationRegister 1 */
|
||
|
|
+// {0x1148, 0, 16, 0x00}, /* XRX200_PCE_AGE_1_MANT Aging Counter Mantissa Value */
|
||
|
|
+// {0x114C, 0, 16, 0x00}, /* XRX200_PCE_PMAP_1 Port Map Register 1 */
|
||
|
|
+// {0x114C, 0, 16, 0x00}, /* XRX200_PCE_PMAP_1_MPMAP Monitoring Port Map */
|
||
|
|
+// {0x1150, 0, 16, 0x00}, /* XRX200_PCE_PMAP_2 Port Map Register 2 */
|
||
|
|
+// {0x1150, 0, 16, 0x00}, /* XRX200_PCE_PMAP_2_DMCPMAP Default Multicast Port Map */
|
||
|
|
+// {0x1154, 0, 16, 0x00}, /* XRX200_PCE_PMAP_3 Port Map Register 3 */
|
||
|
|
+// {0x1154, 0, 16, 0x00}, /* XRX200_PCE_PMAP_3_UUCMAP Default Unknown Unicast Port Map */
|
||
|
|
+// {0x1158, 0, 16, 0x00}, /* XRX200_PCE_GCTRL_0 PCE Global Control Register0 */
|
||
|
|
+// {0x1158, 15, 1, 0x00}, /* XRX200_PCE_GCTRL_0_IGMP IGMP Mode Selection */
|
||
|
|
+ {0x1158, 14, 1, 0x00}, /* XRX200_PCE_GCTRL_0_VLAN VLAN-aware Switching */
|
||
|
|
+// {0x1158, 13, 1, 0x00}, /* XRX200_PCE_GCTRL_0_NOPM No Port Map Forwarding */
|
||
|
|
+// {0x1158, 12, 1, 0x00}, /* XRX200_PCE_GCTRL_0_SCONUC Unknown Unicast Storm Control */
|
||
|
|
+// {0x1158, 11, 1, 0x00}, /* XRX200_PCE_GCTRL_0_SCONMC Multicast Storm Control */
|
||
|
|
+// {0x1158, 10, 1, 0x00}, /* XRX200_PCE_GCTRL_0_SCONBC Broadcast Storm Control */
|
||
|
|
+// {0x1158, 8, 2, 0x00}, /* XRX200_PCE_GCTRL_0_SCONMOD Storm Control Mode */
|
||
|
|
+// {0x1158, 4, 4, 0x00}, /* XRX200_PCE_GCTRL_0_SCONMET Storm Control Metering Instance */
|
||
|
|
+// {0x1158, 3, 1, 0x00}, /* XRX200_PCE_GCTRL_0_MC_VALID Access Request */
|
||
|
|
+// {0x1158, 2, 1, 0x00}, /* XRX200_PCE_GCTRL_0_PLCKMOD Port Lock Mode */
|
||
|
|
+// {0x1158, 1, 1, 0x00}, /* XRX200_PCE_GCTRL_0_PLIMMOD MAC Address Learning Limitation Mode */
|
||
|
|
+// {0x1158, 0, 1, 0x00}, /* XRX200_PCE_GCTRL_0_MTFL MAC Table Flushing */
|
||
|
|
+// {0x115C, 0, 16, 0x00}, /* XRX200_PCE_GCTRL_1 PCE Global Control Register1 */
|
||
|
|
+// {0x115C, 1, 1, 0x00}, /* XRX200_PCE_GCTRL_1_PCE_DIS PCE Disable after currently processed packet */
|
||
|
|
+// {0x115C, 0, 1, 0x00}, /* XRX200_PCE_GCTRL_1_LRNMOD MAC Address Learning Mode */
|
||
|
|
+// {0x1160, 0, 16, 0x00}, /* XRX200_PCE_TCM_GLOB_CTRL Three-color MarkerGlobal Control Register */
|
||
|
|
+// {0x1160, 6, 3, 0x00}, /* XRX200_PCE_TCM_GLOB_CTRL_DPRED Re-marking Drop Precedence Red Encoding */
|
||
|
|
+// {0x1160, 3, 3, 0x00}, /* XRX200_PCE_TCM_GLOB_CTRL_DPYEL Re-marking Drop Precedence Yellow Encoding */
|
||
|
|
+// {0x1160, 0, 3, 0x00}, /* XRX200_PCE_TCM_GLOB_CTRL_DPGRN Re-marking Drop Precedence Green Encoding */
|
||
|
|
+// {0x1164, 0, 16, 0x00}, /* XRX200_PCE_IGMP_CTRL IGMP Control Register */
|
||
|
|
+// {0x1164, 15, 1, 0x00}, /* XRX200_PCE_IGMP_CTRL_FAGEEN Force Aging of Table Entries Enable */
|
||
|
|
+// {0x1164, 14, 1, 0x00}, /* XRX200_PCE_IGMP_CTRL_FLEAVE Fast Leave Enable */
|
||
|
|
+// {0x1164, 13, 1, 0x00}, /* XRX200_PCE_IGMP_CTRL_DMRTEN Default Maximum Response Time Enable */
|
||
|
|
+// {0x1164, 12, 1, 0x00}, /* XRX200_PCE_IGMP_CTRL_JASUP Join Aggregation Suppression Enable */
|
||
|
|
+// {0x1164, 11, 1, 0x00}, /* XRX200_PCE_IGMP_CTRL_REPSUP Report Suppression Enable */
|
||
|
|
+// {0x1164, 10, 1, 0x00}, /* XRX200_PCE_IGMP_CTRL_SRPEN Snooping of Router Port Enable */
|
||
|
|
+// {0x1164, 8, 2, 0x00}, /* XRX200_PCE_IGMP_CTRL_ROB Robustness Variable */
|
||
|
|
+// {0x1164, 0, 8, 0x00}, /* XRX200_PCE_IGMP_CTRL_DMRT IGMP Default Maximum Response Time */
|
||
|
|
+// {0x1168, 0, 16, 0x00}, /* XRX200_PCE_IGMP_DRPM IGMP Default RouterPort Map Register */
|
||
|
|
+// {0x1168, 0, 16, 0x00}, /* XRX200_PCE_IGMP_DRPM_DRPM IGMP Default Router Port Map */
|
||
|
|
+// {0x116C, 0, 16, 0x00}, /* XRX200_PCE_IGMP_AGE_0 IGMP Aging Register0 */
|
||
|
|
+// {0x116C, 3, 8, 0x00}, /* XRX200_PCE_IGMP_AGE_0_MANT IGMP Group Aging Time Mantissa */
|
||
|
|
+// {0x116C, 0, 3, 0x00}, /* XRX200_PCE_IGMP_AGE_0_EXP IGMP Group Aging Time Exponent */
|
||
|
|
+// {0x1170, 0, 16, 0x00}, /* XRX200_PCE_IGMP_AGE_1 IGMP Aging Register1 */
|
||
|
|
+// {0x1170, 0, 12, 0x00}, /* XRX200_PCE_IGMP_AGE_1_MANT IGMP Router Port Aging Time Mantissa */
|
||
|
|
+// {0x1174, 0, 16, 0x00}, /* XRX200_PCE_IGMP_STAT IGMP Status Register */
|
||
|
|
+// {0x1174, 0, 16, 0x00}, /* XRX200_PCE_IGMP_STAT_IGPM IGMP Port Map */
|
||
|
|
+// {0x1178, 0, 16, 0x00}, /* XRX200_WOL_GLB_CTRL Wake-on-LAN ControlRegister */
|
||
|
|
+// {0x1178, 0, 1, 0x00}, /* XRX200_WOL_GLB_CTRL_PASSEN WoL Password Enable */
|
||
|
|
+// {0x117C, 0, 16, 0x00}, /* XRX200_WOL_DA_0 Wake-on-LAN DestinationAddress Register 0 */
|
||
|
|
+// {0x117C, 0, 16, 0x00}, /* XRX200_WOL_DA_0_DA0 WoL Destination Address [15:0] */
|
||
|
|
+// {0x1180, 0, 16, 0x00}, /* XRX200_WOL_DA_1 Wake-on-LAN DestinationAddress Register 1 */
|
||
|
|
+// {0x1180, 0, 16, 0x00}, /* XRX200_WOL_DA_1_DA1 WoL Destination Address [31:16] */
|
||
|
|
+// {0x1184, 0, 16, 0x00}, /* XRX200_WOL_DA_2 Wake-on-LAN DestinationAddress Register 2 */
|
||
|
|
+// {0x1184, 0, 16, 0x00}, /* XRX200_WOL_DA_2_DA2 WoL Destination Address [47:32] */
|
||
|
|
+// {0x1188, 0, 16, 0x00}, /* XRX200_WOL_PW_0 Wake-on-LAN Password Register0 */
|
||
|
|
+// {0x1188, 0, 16, 0x00}, /* XRX200_WOL_PW_0_PW0 WoL Password [15:0] */
|
||
|
|
+// {0x118C, 0, 16, 0x00}, /* XRX200_WOL_PW_1 Wake-on-LAN Password Register1 */
|
||
|
|
+// {0x118C, 0, 16, 0x00}, /* XRX200_WOL_PW_1_PW1 WoL Password [31:16] */
|
||
|
|
+// {0x1190, 0, 16, 0x00}, /* XRX200_WOL_PW_2 Wake-on-LAN Password Register2 */
|
||
|
|
+// {0x1190, 0, 16, 0x00}, /* XRX200_WOL_PW_2_PW2 WoL Password [47:32] */
|
||
|
|
+// {0x1194, 0, 16, 0x00}, /* XRX200_PCE_IER_0_PINT Parser and ClassificationEngine Global Interrupt Enable Register 0 */
|
||
|
|
+// {0x1194, 15, 1, 0x00}, /* XRX200_PCE_IER_0_PINT_15 Port Interrupt Enable */
|
||
|
|
+// {0x1194, 14, 1, 0x00}, /* XRX200_PCE_IER_0_PINT_14 Port Interrupt Enable */
|
||
|
|
+// {0x1194, 13, 1, 0x00}, /* XRX200_PCE_IER_0_PINT_13 Port Interrupt Enable */
|
||
|
|
+// {0x1194, 12, 1, 0x00}, /* XRX200_PCE_IER_0_PINT_12 Port Interrupt Enable */
|
||
|
|
+// {0x1194, 11, 1, 0x00}, /* XRX200_PCE_IER_0_PINT_11 Port Interrupt Enable */
|
||
|
|
+// {0x1194, 10, 1, 0x00}, /* XRX200_PCE_IER_0_PINT_10 Port Interrupt Enable */
|
||
|
|
+// {0x1194, 9, 1, 0x00}, /* XRX200_PCE_IER_0_PINT_9 Port Interrupt Enable */
|
||
|
|
+// {0x1194, 8, 1, 0x00}, /* XRX200_PCE_IER_0_PINT_8 Port Interrupt Enable */
|
||
|
|
+// {0x1194, 7, 1, 0x00}, /* XRX200_PCE_IER_0_PINT_7 Port Interrupt Enable */
|
||
|
|
+// {0x1194, 6, 1, 0x00}, /* XRX200_PCE_IER_0_PINT_6 Port Interrupt Enable */
|
||
|
|
+// {0x1194, 5, 1, 0x00}, /* XRX200_PCE_IER_0_PINT_5 Port Interrupt Enable */
|
||
|
|
+// {0x1194, 4, 1, 0x00}, /* XRX200_PCE_IER_0_PINT_4 Port Interrupt Enable */
|
||
|
|
+// {0x1194, 3, 1, 0x00}, /* XRX200_PCE_IER_0_PINT_3 Port Interrupt Enable */
|
||
|
|
+// {0x1194, 2, 1, 0x00}, /* XRX200_PCE_IER_0_PINT_2 Port Interrupt Enable */
|
||
|
|
+// {0x1194, 1, 1, 0x00}, /* XRX200_PCE_IER_0_PINT_1 Port Interrupt Enable */
|
||
|
|
+// {0x1194, 0, 1, 0x00}, /* XRX200_PCE_IER_0_PINT_0 Port Interrupt Enable */
|
||
|
|
+// {0x1198, 0, 16, 0x00}, /* XRX200_PCE_IER_1 Parser and ClassificationEngine Global Interrupt Enable Register 1 */
|
||
|
|
+// {0x1198, 6, 1, 0x00}, /* XRX200_PCE_IER_1_FLOWINT Traffic Flow Table Interrupt Rule matched Interrupt Enable */
|
||
|
|
+// {0x1198, 5, 1, 0x00}, /* XRX200_PCE_IER_1_CPH2 Classification Phase 2 Ready Interrupt Enable */
|
||
|
|
+// {0x1198, 4, 1, 0x00}, /* XRX200_PCE_IER_1_CPH1 Classification Phase 1 Ready Interrupt Enable */
|
||
|
|
+// {0x1198, 3, 1, 0x00}, /* XRX200_PCE_IER_1_CPH0 Classification Phase 0 Ready Interrupt Enable */
|
||
|
|
+// {0x1198, 2, 1, 0x00}, /* XRX200_PCE_IER_1_PRDY Parser Ready Interrupt Enable */
|
||
|
|
+// {0x1198, 1, 1, 0x00}, /* XRX200_PCE_IER_1_IGTF IGMP Table Full Interrupt Enable */
|
||
|
|
+// {0x1198, 0, 1, 0x00}, /* XRX200_PCE_IER_1_MTF MAC Table Full Interrupt Enable */
|
||
|
|
+// {0x119C, 0, 16, 0x00}, /* XRX200_PCE_ISR_0_PINT Parser and ClassificationEngine Global Interrupt Status Register 0 */
|
||
|
|
+// {0x119C, 15, 1, 0x00}, /* XRX200_PCE_ISR_0_PINT_15 Port Interrupt */
|
||
|
|
+// {0x119C, 14, 1, 0x00}, /* XRX200_PCE_ISR_0_PINT_14 Port Interrupt */
|
||
|
|
+// {0x119C, 13, 1, 0x00}, /* XRX200_PCE_ISR_0_PINT_13 Port Interrupt */
|
||
|
|
+// {0x119C, 12, 1, 0x00}, /* XRX200_PCE_ISR_0_PINT_12 Port Interrupt */
|
||
|
|
+// {0x119C, 11, 1, 0x00}, /* XRX200_PCE_ISR_0_PINT_11 Port Interrupt */
|
||
|
|
+// {0x119C, 10, 1, 0x00}, /* XRX200_PCE_ISR_0_PINT_10 Port Interrupt */
|
||
|
|
+// {0x119C, 9, 1, 0x00}, /* XRX200_PCE_ISR_0_PINT_9 Port Interrupt */
|
||
|
|
+// {0x119C, 8, 1, 0x00}, /* XRX200_PCE_ISR_0_PINT_8 Port Interrupt */
|
||
|
|
+// {0x119C, 7, 1, 0x00}, /* XRX200_PCE_ISR_0_PINT_7 Port Interrupt */
|
||
|
|
+// {0x119C, 6, 1, 0x00}, /* XRX200_PCE_ISR_0_PINT_6 Port Interrupt */
|
||
|
|
+// {0x119C, 5, 1, 0x00}, /* XRX200_PCE_ISR_0_PINT_5 Port Interrupt */
|
||
|
|
+// {0x119C, 4, 1, 0x00}, /* XRX200_PCE_ISR_0_PINT_4 Port Interrupt */
|
||
|
|
+// {0x119C, 3, 1, 0x00}, /* XRX200_PCE_ISR_0_PINT_3 Port Interrupt */
|
||
|
|
+// {0x119C, 2, 1, 0x00}, /* XRX200_PCE_ISR_0_PINT_2 Port Interrupt */
|
||
|
|
+// {0x119C, 1, 1, 0x00}, /* XRX200_PCE_ISR_0_PINT_1 Port Interrupt */
|
||
|
|
+// {0x119C, 0, 1, 0x00}, /* XRX200_PCE_ISR_0_PINT_0 Port Interrupt */
|
||
|
|
+// {0x11A0, 0, 16, 0x00}, /* XRX200_PCE_ISR_1 Parser and ClassificationEngine Global Interrupt Status Register 1 */
|
||
|
|
+// {0x11A0, 6, 1, 0x00}, /* XRX200_PCE_ISR_1_FLOWINT Traffic Flow Table Interrupt Rule matched */
|
||
|
|
+// {0x11A0, 5, 1, 0x00}, /* XRX200_PCE_ISR_1_CPH2 Classification Phase 2 Ready Interrupt */
|
||
|
|
+// {0x11A0, 4, 1, 0x00}, /* XRX200_PCE_ISR_1_CPH1 Classification Phase 1 Ready Interrupt */
|
||
|
|
+// {0x11A0, 3, 1, 0x00}, /* XRX200_PCE_ISR_1_CPH0 Classification Phase 0 Ready Interrupt */
|
||
|
|
+// {0x11A0, 2, 1, 0x00}, /* XRX200_PCE_ISR_1_PRDY Parser Ready Interrupt */
|
||
|
|
+// {0x11A0, 1, 1, 0x00}, /* XRX200_PCE_ISR_1_IGTF IGMP Table Full Interrupt */
|
||
|
|
+// {0x11A0, 0, 1, 0x00}, /* XRX200_PCE_ISR_1_MTF MAC Table Full Interrupt */
|
||
|
|
+// {0x11A4, 0, 16, 0x00}, /* XRX200_PARSER_STAT_FIFO Parser Status Register */
|
||
|
|
+// {0x11A4, 8, 8, 0x00}, /* XRX200_PARSER_STAT_FSM_DAT_CNT Parser FSM Data Counter */
|
||
|
|
+// {0x11A4, 5, 3, 0x00}, /* XRX200_PARSER_STAT_FSM_STATE Parser FSM State */
|
||
|
|
+// {0x11A4, 4, 1, 0x00}, /* XRX200_PARSER_STAT_PKT_ERR Packet error detected */
|
||
|
|
+// {0x11A4, 3, 1, 0x00}, /* XRX200_PARSER_STAT_FSM_FIN Parser FSM finished */
|
||
|
|
+// {0x11A4, 2, 1, 0x00}, /* XRX200_PARSER_STAT_FSM_START Parser FSM start */
|
||
|
|
+// {0x11A4, 1, 1, 0x00}, /* XRX200_PARSER_STAT_FIFO_RDY Parser FIFO ready for read. */
|
||
|
|
+// {0x11A4, 0, 1, 0x00}, /* XRX200_PARSER_STAT_FIFO_FULL Parser */
|
||
|
|
+// {0x1200, 0, 16, 0x28}, /* XRX200_PCE_PCTRL_0 PCE Port ControlRegister 0 */
|
||
|
|
+// {0x1200, 13, 1, 0x28}, /* XRX200_PCE_PCTRL_0_MCST Multicast Forwarding Mode Selection */
|
||
|
|
+// {0x1200, 12, 1, 0x28}, /* XRX200_PCE_PCTRL_0_EGSTEN Table-based Egress Special Tag Enable */
|
||
|
|
+// {0x1200, 11, 1, 0x28}, /* XRX200_PCE_PCTRL_0_IGSTEN Ingress Special Tag Enable */
|
||
|
|
+// {0x1200, 10, 1, 0x28}, /* XRX200_PCE_PCTRL_0_PCPEN PCP Remarking Mode */
|
||
|
|
+// {0x1200, 9, 1, 0x28}, /* XRX200_PCE_PCTRL_0_CLPEN Class Remarking Mode */
|
||
|
|
+// {0x1200, 8, 1, 0x28}, /* XRX200_PCE_PCTRL_0_DPEN Drop Precedence Remarking Mode */
|
||
|
|
+// {0x1200, 7, 1, 0x28}, /* XRX200_PCE_PCTRL_0_CMOD Three-color Marker Color Mode */
|
||
|
|
+// {0x1200, 6, 1, 0x28}, /* XRX200_PCE_PCTRL_0_VREP VLAN Replacement Mode */
|
||
|
|
+ {0x1200, 5, 1, 0x28}, /* XRX200_PCE_PCTRL_0_TVM Transparent VLAN Mode */
|
||
|
|
+// {0x1200, 4, 1, 0x28}, /* XRX200_PCE_PCTRL_0_PLOCK Port Locking Enable */
|
||
|
|
+// {0x1200, 3, 1, 0x28}, /* XRX200_PCE_PCTRL_0_AGEDIS Aging Disable */
|
||
|
|
+// {0x1200, 0, 3, 0x28}, /* XRX200_PCE_PCTRL_0_PSTATE Port State */
|
||
|
|
+// {0x1204, 0, 16, 0x28}, /* XRX200_PCE_PCTRL_1 PCE Port ControlRegister 1 */
|
||
|
|
+// {0x1204, 0, 8, 0x28}, /* XRX200_PCE_PCTRL_1_LRNLIM MAC Address Learning Limit */
|
||
|
|
+// {0x1208, 0, 16, 0x28}, /* XRX200_PCE_PCTRL_2 PCE Port ControlRegister 2 */
|
||
|
|
+// {0x1208, 7, 1, 0x28}, /* XRX200_PCE_PCTRL_2_DSCPMOD DSCP Mode Selection */
|
||
|
|
+// {0x1208, 5, 2, 0x28}, /* XRX200_PCE_PCTRL_2_DSCP Enable DSCP to select the Class of Service */
|
||
|
|
+// {0x1208, 4, 1, 0x28}, /* XRX200_PCE_PCTRL_2_PCP Enable VLAN PCP to select the Class of Service */
|
||
|
|
+// {0x1208, 0, 4, 0x28}, /* XRX200_PCE_PCTRL_2_PCLASS Port-based Traffic Class */
|
||
|
|
+// {0x120C, 0, 16, 0x28}, /* XRX200_PCE_PCTRL_3_VIO PCE Port ControlRegister 3 */
|
||
|
|
+// {0x120C, 11, 1, 0x28}, /* XRX200_PCE_PCTRL_3_EDIR Egress Redirection Mode */
|
||
|
|
+// {0x120C, 10, 1, 0x28}, /* XRX200_PCE_PCTRL_3_RXDMIR Receive Mirroring Enable for dropped frames */
|
||
|
|
+// {0x120C, 9, 1, 0x28}, /* XRX200_PCE_PCTRL_3_RXVMIR Receive Mirroring Enable for valid frames */
|
||
|
|
+// {0x120C, 8, 1, 0x28}, /* XRX200_PCE_PCTRL_3_TXMIR Transmit Mirroring Enable */
|
||
|
|
+// {0x120C, 7, 1, 0x28}, /* XRX200_PCE_PCTRL_3_VIO_7 Violation Type 7 Mirroring Enable */
|
||
|
|
+// {0x120C, 6, 1, 0x28}, /* XRX200_PCE_PCTRL_3_VIO_6 Violation Type 6 Mirroring Enable */
|
||
|
|
+// {0x120C, 5, 1, 0x28}, /* XRX200_PCE_PCTRL_3_VIO_5 Violation Type 5 Mirroring Enable */
|
||
|
|
+// {0x120C, 4, 1, 0x28}, /* XRX200_PCE_PCTRL_3_VIO_4 Violation Type 4 Mirroring Enable */
|
||
|
|
+// {0x120C, 3, 1, 0x28}, /* XRX200_PCE_PCTRL_3_VIO_3 Violation Type 3 Mirroring Enable */
|
||
|
|
+// {0x120C, 2, 1, 0x28}, /* XRX200_PCE_PCTRL_3_VIO_2 Violation Type 2 Mirroring Enable */
|
||
|
|
+// {0x120C, 1, 1, 0x28}, /* XRX200_PCE_PCTRL_3_VIO_1 Violation Type 1 Mirroring Enable */
|
||
|
|
+// {0x120C, 0, 1, 0x28}, /* XRX200_PCE_PCTRL_3_VIO_0 Violation Type 0 Mirroring Enable */
|
||
|
|
+// {0x1210, 0, 16, 0x28}, /* XRX200_WOL_CTRL Wake-on-LAN ControlRegister */
|
||
|
|
+// {0x1210, 0, 1, 0x28}, /* XRX200_WOL_CTRL_PORT WoL Enable */
|
||
|
|
+// {0x1214, 0, 16, 0x28}, /* XRX200_PCE_VCTRL PCE VLAN ControlRegister */
|
||
|
|
+ {0x1214, 5, 1, 0x28}, /* XRX200_PCE_VCTRL_VSR VLAN Security Rule */
|
||
|
|
+ {0x1214, 4, 1, 0x28}, /* XRX200_PCE_VCTRL_VEMR VLAN Egress Member Violation Rule */
|
||
|
|
+ {0x1214, 3, 1, 0x28}, /* XRX200_PCE_VCTRL_VIMR VLAN Ingress Member Violation Rule */
|
||
|
|
+ {0x1214, 1, 2, 0x28}, /* XRX200_PCE_VCTRL_VINR VLAN Ingress Tag Rule */
|
||
|
|
+ {0x1214, 0, 1, 0x28}, /* XRX200_PCE_VCTRL_UVR Unknown VLAN Rule */
|
||
|
|
+// {0x1218, 0, 16, 0x28}, /* XRX200_PCE_DEFPVID PCE Default PortVID Register */
|
||
|
|
+ {0x1218, 0, 6, 0x28}, /* XRX200_PCE_DEFPVID_PVID Default Port VID Index */
|
||
|
|
+// {0x121C, 0, 16, 0x28}, /* XRX200_PCE_PSTAT PCE Port StatusRegister */
|
||
|
|
+// {0x121C, 0, 16, 0x28}, /* XRX200_PCE_PSTAT_LRNCNT Learning Count */
|
||
|
|
+// {0x1220, 0, 16, 0x28}, /* XRX200_PCE_PIER Parser and ClassificationEngine Port Interrupt Enable Register */
|
||
|
|
+// {0x1220, 5, 1, 0x28}, /* XRX200_PCE_PIER_CLDRP Classification Drop Interrupt Enable */
|
||
|
|
+// {0x1220, 4, 1, 0x28}, /* XRX200_PCE_PIER_PTDRP Port Drop Interrupt Enable */
|
||
|
|
+// {0x1220, 3, 1, 0x28}, /* XRX200_PCE_PIER_VLAN VLAN Violation Interrupt Enable */
|
||
|
|
+// {0x1220, 2, 1, 0x28}, /* XRX200_PCE_PIER_WOL Wake-on-LAN Interrupt Enable */
|
||
|
|
+// {0x1220, 1, 1, 0x28}, /* XRX200_PCE_PIER_LOCK Port Limit Alert Interrupt Enable */
|
||
|
|
+// {0x1220, 0, 1, 0x28}, /* XRX200_PCE_PIER_LIM Port Lock Alert Interrupt Enable */
|
||
|
|
+// {0x1224, 0, 16, 0x28}, /* XRX200_PCE_PISR Parser and ClassificationEngine Port Interrupt Status Register */
|
||
|
|
+// {0x1224, 5, 1, 0x28}, /* XRX200_PCE_PISR_CLDRP Classification Drop Interrupt */
|
||
|
|
+// {0x1224, 4, 1, 0x28}, /* XRX200_PCE_PISR_PTDRP Port Drop Interrupt */
|
||
|
|
+// {0x1224, 3, 1, 0x28}, /* XRX200_PCE_PISR_VLAN VLAN Violation Interrupt */
|
||
|
|
+// {0x1224, 2, 1, 0x28}, /* XRX200_PCE_PISR_WOL Wake-on-LAN Interrupt */
|
||
|
|
+// {0x1224, 1, 1, 0x28}, /* XRX200_PCE_PISR_LOCK Port Lock Alert Interrupt */
|
||
|
|
+// {0x1224, 0, 1, 0x28}, /* XRX200_PCE_PISR_LIMIT Port Limitation Alert Interrupt */
|
||
|
|
+// {0x1600, 0, 16, 0x1c}, /* XRX200_PCE_TCM_CTRL Three-colorMarker Control Register */
|
||
|
|
+// {0x1600, 0, 1, 0x1c}, /* XRX200_PCE_TCM_CTRL_TCMEN Three-color Marker metering instance enable */
|
||
|
|
+// {0x1604, 0, 16, 0x1c}, /* XRX200_PCE_TCM_STAT Three-colorMarker Status Register */
|
||
|
|
+// {0x1604, 1, 1, 0x1c}, /* XRX200_PCE_TCM_STAT_AL1 Three-color Marker Alert 1 Status */
|
||
|
|
+// {0x1604, 0, 1, 0x1c}, /* XRX200_PCE_TCM_STAT_AL0 Three-color Marker Alert 0 Status */
|
||
|
|
+// {0x1608, 0, 16, 0x1c}, /* XRX200_PCE_TCM_CBS Three-color MarkerCommitted Burst Size Register */
|
||
|
|
+// {0x1608, 0, 10, 0x1c}, /* XRX200_PCE_TCM_CBS_CBS Committed Burst Size */
|
||
|
|
+// {0x160C, 0, 16, 0x1c}, /* XRX200_PCE_TCM_EBS Three-color MarkerExcess Burst Size Register */
|
||
|
|
+// {0x160C, 0, 10, 0x1c}, /* XRX200_PCE_TCM_EBS_EBS Excess Burst Size */
|
||
|
|
+// {0x1610, 0, 16, 0x1c}, /* XRX200_PCE_TCM_IBS Three-color MarkerInstantaneous Burst Size Register */
|
||
|
|
+// {0x1610, 0, 2, 0x1c}, /* XRX200_PCE_TCM_IBS_IBS Instantaneous Burst Size */
|
||
|
|
+// {0x1614, 0, 16, 0x1c}, /* XRX200_PCE_TCM_CIR_MANT Three-colorMarker Constant Information Rate Mantissa Register */
|
||
|
|
+// {0x1614, 0, 10, 0x1c}, /* XRX200_PCE_TCM_CIR_MANT_MANT Rate Counter Mantissa */
|
||
|
|
+// {0x1618, 0, 16, 0x1c}, /* XRX200_PCE_TCM_CIR_EXP Three-colorMarker Constant Information Rate Exponent Register */
|
||
|
|
+// {0x1618, 0, 4, 0x1c}, /* XRX200_PCE_TCM_CIR_EXP_EXP Rate Counter Exponent */
|
||
|
|
+// {0x2300, 0, 16, 0x00}, /* XRX200_MAC_TEST MAC Test Register */
|
||
|
|
+// {0x2300, 0, 16, 0x00}, /* XRX200_MAC_TEST_JTP Jitter Test Pattern */
|
||
|
|
+// {0x2304, 0, 16, 0x00}, /* XRX200_MAC_PFAD_CFG MAC Pause FrameSource Address Configuration Register */
|
||
|
|
+// {0x2304, 0, 1, 0x00}, /* XRX200_MAC_PFAD_CFG_SAMOD Source Address Mode */
|
||
|
|
+// {0x2308, 0, 16, 0x00}, /* XRX200_MAC_PFSA_0 Pause Frame SourceAddress Part 0 */
|
||
|
|
+// {0x2308, 0, 16, 0x00}, /* XRX200_MAC_PFSA_0_PFAD Pause Frame Source Address Part 0 */
|
||
|
|
+// {0x230C, 0, 16, 0x00}, /* XRX200_MAC_PFSA_1 Pause Frame SourceAddress Part 1 */
|
||
|
|
+// {0x230C, 0, 16, 0x00}, /* XRX200_MAC_PFSA_1_PFAD Pause Frame Source Address Part 1 */
|
||
|
|
+// {0x2310, 0, 16, 0x00}, /* XRX200_MAC_PFSA_2 Pause Frame SourceAddress Part 2 */
|
||
|
|
+// {0x2310, 0, 16, 0x00}, /* XRX200_MAC_PFSA_2_PFAD Pause Frame Source Address Part 2 */
|
||
|
|
+// {0x2314, 0, 16, 0x00}, /* XRX200_MAC_FLEN MAC Frame Length Register */
|
||
|
|
+// {0x2314, 0, 14, 0x00}, /* XRX200_MAC_FLEN_LEN Maximum Frame Length */
|
||
|
|
+// {0x2318, 0, 16, 0x00}, /* XRX200_MAC_VLAN_ETYPE_0 MAC VLAN EthertypeRegister 0 */
|
||
|
|
+// {0x2318, 0, 16, 0x00}, /* XRX200_MAC_VLAN_ETYPE_0_OUTER Ethertype */
|
||
|
|
+// {0x231C, 0, 16, 0x00}, /* XRX200_MAC_VLAN_ETYPE_1 MAC VLAN EthertypeRegister 1 */
|
||
|
|
+// {0x231C, 0, 16, 0x00}, /* XRX200_MAC_VLAN_ETYPE_1_INNER Ethertype */
|
||
|
|
+// {0x2320, 0, 16, 0x00}, /* XRX200_MAC_IER MAC Interrupt EnableRegister */
|
||
|
|
+// {0x2320, 0, 8, 0x00}, /* XRX200_MAC_IER_MACIEN MAC Interrupt Enable */
|
||
|
|
+// {0x2324, 0, 16, 0x00}, /* XRX200_MAC_ISR MAC Interrupt StatusRegister */
|
||
|
|
+// {0x2324, 0, 8, 0x00}, /* XRX200_MAC_ISR_MACINT MAC Interrupt */
|
||
|
|
+// {0x2400, 0, 16, 0x30}, /* XRX200_MAC_PSTAT MAC Port Status Register */
|
||
|
|
+// {0x2400, 11, 1, 0x30}, /* XRX200_MAC_PSTAT_PACT PHY Active Status */
|
||
|
|
+ {0x2400, 10, 1, 0x30}, /* XRX200_MAC_PSTAT_GBIT Gigabit Speed Status */
|
||
|
|
+ {0x2400, 9, 1, 0x30}, /* XRX200_MAC_PSTAT_MBIT Megabit Speed Status */
|
||
|
|
+ {0x2400, 8, 1, 0x30}, /* XRX200_MAC_PSTAT_FDUP Full Duplex Status */
|
||
|
|
+// {0x2400, 7, 1, 0x30}, /* XRX200_MAC_PSTAT_RXPAU Receive Pause Status */
|
||
|
|
+// {0x2400, 6, 1, 0x30}, /* XRX200_MAC_PSTAT_TXPAU Transmit Pause Status */
|
||
|
|
+// {0x2400, 5, 1, 0x30}, /* XRX200_MAC_PSTAT_RXPAUEN Receive Pause Enable Status */
|
||
|
|
+// {0x2400, 4, 1, 0x30}, /* XRX200_MAC_PSTAT_TXPAUEN Transmit Pause Enable Status */
|
||
|
|
+ {0x2400, 3, 1, 0x30}, /* XRX200_MAC_PSTAT_LSTAT Link Status */
|
||
|
|
+// {0x2400, 2, 1, 0x30}, /* XRX200_MAC_PSTAT_CRS Carrier Sense Status */
|
||
|
|
+// {0x2400, 1, 1, 0x30}, /* XRX200_MAC_PSTAT_TXLPI Transmit Low-power Idle Status */
|
||
|
|
+// {0x2400, 0, 1, 0x30}, /* XRX200_MAC_PSTAT_RXLPI Receive Low-power Idle Status */
|
||
|
|
+// {0x2404, 0, 16, 0x30}, /* XRX200_MAC_PISR MAC Interrupt Status Register */
|
||
|
|
+// {0x2404, 13, 1, 0x30}, /* XRX200_MAC_PISR_PACT PHY Active Status */
|
||
|
|
+// {0x2404, 12, 1, 0x30}, /* XRX200_MAC_PISR_SPEED Megabit Speed Status */
|
||
|
|
+// {0x2404, 11, 1, 0x30}, /* XRX200_MAC_PISR_FDUP Full Duplex Status */
|
||
|
|
+// {0x2404, 10, 1, 0x30}, /* XRX200_MAC_PISR_RXPAUEN Receive Pause Enable Status */
|
||
|
|
+// {0x2404, 9, 1, 0x30}, /* XRX200_MAC_PISR_TXPAUEN Transmit Pause Enable Status */
|
||
|
|
+// {0x2404, 8, 1, 0x30}, /* XRX200_MAC_PISR_LPIOFF Receive Low-power Idle Mode is left */
|
||
|
|
+// {0x2404, 7, 1, 0x30}, /* XRX200_MAC_PISR_LPION Receive Low-power Idle Mode is entered */
|
||
|
|
+// {0x2404, 6, 1, 0x30}, /* XRX200_MAC_PISR_JAM Jam Status Detected */
|
||
|
|
+// {0x2404, 5, 1, 0x30}, /* XRX200_MAC_PISR_TOOSHORT Too Short Frame Error Detected */
|
||
|
|
+// {0x2404, 4, 1, 0x30}, /* XRX200_MAC_PISR_TOOLONG Too Long Frame Error Detected */
|
||
|
|
+// {0x2404, 3, 1, 0x30}, /* XRX200_MAC_PISR_LENERR Length Mismatch Error Detected */
|
||
|
|
+// {0x2404, 2, 1, 0x30}, /* XRX200_MAC_PISR_FCSERR Frame Checksum Error Detected */
|
||
|
|
+// {0x2404, 1, 1, 0x30}, /* XRX200_MAC_PISR_TXPAUSE Pause Frame Transmitted */
|
||
|
|
+// {0x2404, 0, 1, 0x30}, /* XRX200_MAC_PISR_RXPAUSE Pause Frame Received */
|
||
|
|
+// {0x2408, 0, 16, 0x30}, /* XRX200_MAC_PIER MAC Interrupt Enable Register */
|
||
|
|
+// {0x2408, 13, 1, 0x30}, /* XRX200_MAC_PIER_PACT PHY Active Status */
|
||
|
|
+// {0x2408, 12, 1, 0x30}, /* XRX200_MAC_PIER_SPEED Megabit Speed Status */
|
||
|
|
+// {0x2408, 11, 1, 0x30}, /* XRX200_MAC_PIER_FDUP Full Duplex Status */
|
||
|
|
+// {0x2408, 10, 1, 0x30}, /* XRX200_MAC_PIER_RXPAUEN Receive Pause Enable Status */
|
||
|
|
+// {0x2408, 9, 1, 0x30}, /* XRX200_MAC_PIER_TXPAUEN Transmit Pause Enable Status */
|
||
|
|
+// {0x2408, 8, 1, 0x30}, /* XRX200_MAC_PIER_LPIOFF Low-power Idle Off Interrupt Mask */
|
||
|
|
+// {0x2408, 7, 1, 0x30}, /* XRX200_MAC_PIER_LPION Low-power Idle On Interrupt Mask */
|
||
|
|
+// {0x2408, 6, 1, 0x30}, /* XRX200_MAC_PIER_JAM Jam Status Interrupt Mask */
|
||
|
|
+// {0x2408, 5, 1, 0x30}, /* XRX200_MAC_PIER_TOOSHORT Too Short Frame Error Interrupt Mask */
|
||
|
|
+// {0x2408, 4, 1, 0x30}, /* XRX200_MAC_PIER_TOOLONG Too Long Frame Error Interrupt Mask */
|
||
|
|
+// {0x2408, 3, 1, 0x30}, /* XRX200_MAC_PIER_LENERR Length Mismatch Error Interrupt Mask */
|
||
|
|
+// {0x2408, 2, 1, 0x30}, /* XRX200_MAC_PIER_FCSERR Frame Checksum Error Interrupt Mask */
|
||
|
|
+// {0x2408, 1, 1, 0x30}, /* XRX200_MAC_PIER_TXPAUSE Transmit Pause Frame Interrupt Mask */
|
||
|
|
+// {0x2408, 0, 1, 0x30}, /* XRX200_MAC_PIER_RXPAUSE Receive Pause Frame Interrupt Mask */
|
||
|
|
+// {0x240C, 0, 16, 0x30}, /* XRX200_MAC_CTRL_0 MAC Control Register0 */
|
||
|
|
+// {0x240C, 13, 2, 0x30}, /* XRX200_MAC_CTRL_0_LCOL Late Collision Control */
|
||
|
|
+// {0x240C, 12, 1, 0x30}, /* XRX200_MAC_CTRL_0_BM Burst Mode Control */
|
||
|
|
+// {0x240C, 11, 1, 0x30}, /* XRX200_MAC_CTRL_0_APADEN Automatic VLAN Padding Enable */
|
||
|
|
+// {0x240C, 10, 1, 0x30}, /* XRX200_MAC_CTRL_0_VPAD2EN Stacked VLAN Padding Enable */
|
||
|
|
+// {0x240C, 9, 1, 0x30}, /* XRX200_MAC_CTRL_0_VPADEN VLAN Padding Enable */
|
||
|
|
+// {0x240C, 8, 1, 0x30}, /* XRX200_MAC_CTRL_0_PADEN Padding Enable */
|
||
|
|
+// {0x240C, 7, 1, 0x30}, /* XRX200_MAC_CTRL_0_FCS Transmit FCS Control */
|
||
|
|
+ {0x240C, 4, 3, 0x30}, /* XRX200_MAC_CTRL_0_FCON Flow Control Mode */
|
||
|
|
+// {0x240C, 2, 2, 0x30}, /* XRX200_MAC_CTRL_0_FDUP Full Duplex Control */
|
||
|
|
+// {0x240C, 0, 2, 0x30}, /* XRX200_MAC_CTRL_0_GMII GMII/MII interface mode selection */
|
||
|
|
+// {0x2410, 0, 16, 0x30}, /* XRX200_MAC_CTRL_1 MAC Control Register1 */
|
||
|
|
+// {0x2410, 8, 1, 0x30}, /* XRX200_MAC_CTRL_1_SHORTPRE Short Preamble Control */
|
||
|
|
+// {0x2410, 0, 4, 0x30}, /* XRX200_MAC_CTRL_1_IPG Minimum Inter Packet Gap Size */
|
||
|
|
+// {0x2414, 0, 16, 0x30}, /* XRX200_MAC_CTRL_2 MAC Control Register2 */
|
||
|
|
+// {0x2414, 3, 1, 0x30}, /* XRX200_MAC_CTRL_2_MLEN Maximum Untagged Frame Length */
|
||
|
|
+// {0x2414, 2, 1, 0x30}, /* XRX200_MAC_CTRL_2_LCHKL Frame Length Check Long Enable */
|
||
|
|
+// {0x2414, 0, 2, 0x30}, /* XRX200_MAC_CTRL_2_LCHKS Frame Length Check Short Enable */
|
||
|
|
+// {0x2418, 0, 16, 0x30}, /* XRX200_MAC_CTRL_3 MAC Control Register3 */
|
||
|
|
+// {0x2418, 0, 4, 0x30}, /* XRX200_MAC_CTRL_3_RCNT Retry Count */
|
||
|
|
+// {0x241C, 0, 16, 0x30}, /* XRX200_MAC_CTRL_4 MAC Control Register4 */
|
||
|
|
+// {0x241C, 7, 1, 0x30}, /* XRX200_MAC_CTRL_4_LPIEN LPI Mode Enable */
|
||
|
|
+// {0x241C, 0, 7, 0x30}, /* XRX200_MAC_CTRL_4_WAIT LPI Wait Time */
|
||
|
|
+// {0x2420, 0, 16, 0x30}, /* XRX200_MAC_CTRL_5_PJPS MAC Control Register5 */
|
||
|
|
+// {0x2420, 1, 1, 0x30}, /* XRX200_MAC_CTRL_5_PJPS_NOBP Prolonged Jam pattern size during no-backpressure state */
|
||
|
|
+// {0x2420, 0, 1, 0x30}, /* XRX200_MAC_CTRL_5_PJPS_BP Prolonged Jam pattern size during backpressure state */
|
||
|
|
+// {0x2424, 0, 16, 0x30}, /* XRX200_MAC_CTRL_6_XBUF Transmit and ReceiveBuffer Control Register */
|
||
|
|
+// {0x2424, 9, 3, 0x30}, /* XRX200_MAC_CTRL_6_RBUF_DLY_WP Delay */
|
||
|
|
+// {0x2424, 8, 1, 0x30}, /* XRX200_MAC_CTRL_6_RBUF_INIT Receive Buffer Initialization */
|
||
|
|
+// {0x2424, 6, 1, 0x30}, /* XRX200_MAC_CTRL_6_RBUF_BYPASS Bypass the Receive Buffer */
|
||
|
|
+// {0x2424, 3, 3, 0x30}, /* XRX200_MAC_CTRL_6_XBUF_DLY_WP Delay */
|
||
|
|
+// {0x2424, 2, 1, 0x30}, /* XRX200_MAC_CTRL_6_XBUF_INIT Initialize the Transmit Buffer */
|
||
|
|
+// {0x2424, 0, 1, 0x30}, /* XRX200_MAC_CTRL_6_XBUF_BYPASS Bypass the Transmit Buffer */
|
||
|
|
+// {0x2428, 0, 16, 0x30}, /* XRX200_MAC_BUFST_XBUF MAC Receive and TransmitBuffer Status Register */
|
||
|
|
+// {0x2428, 3, 1, 0x30}, /* XRX200_MAC_BUFST_RBUF_UFL Receive Buffer Underflow Indicator */
|
||
|
|
+// {0x2428, 2, 1, 0x30}, /* XRX200_MAC_BUFST_RBUF_OFL Receive Buffer Overflow Indicator */
|
||
|
|
+// {0x2428, 1, 1, 0x30}, /* XRX200_MAC_BUFST_XBUF_UFL Transmit Buffer Underflow Indicator */
|
||
|
|
+// {0x2428, 0, 1, 0x30}, /* XRX200_MAC_BUFST_XBUF_OFL Transmit Buffer Overflow Indicator */
|
||
|
|
+// {0x242C, 0, 16, 0x30}, /* XRX200_MAC_TESTEN MAC Test Enable Register */
|
||
|
|
+// {0x242C, 2, 1, 0x30}, /* XRX200_MAC_TESTEN_JTEN Jitter Test Enable */
|
||
|
|
+// {0x242C, 1, 1, 0x30}, /* XRX200_MAC_TESTEN_TXER Transmit Error Insertion */
|
||
|
|
+// {0x242C, 0, 1, 0x30}, /* XRX200_MAC_TESTEN_LOOP MAC Loopback Enable */
|
||
|
|
+// {0x2900, 0, 16, 0x00}, /* XRX200_FDMA_CTRL Ethernet Switch FetchDMA Control Register */
|
||
|
|
+// {0x2900, 7, 5, 0x00}, /* XRX200_FDMA_CTRL_LPI_THRESHOLD Low Power Idle Threshold */
|
||
|
|
+// {0x2900, 4, 3, 0x00}, /* XRX200_FDMA_CTRL_LPI_MODE Low Power Idle Mode */
|
||
|
|
+// {0x2900, 2, 2, 0x00}, /* XRX200_FDMA_CTRL_EGSTAG Egress Special Tag Size */
|
||
|
|
+// {0x2900, 1, 1, 0x00}, /* XRX200_FDMA_CTRL_IGSTAG Ingress Special Tag Size */
|
||
|
|
+// {0x2900, 0, 1, 0x00}, /* XRX200_FDMA_CTRL_EXCOL Excessive Collision Handling */
|
||
|
|
+// {0x2904, 0, 16, 0x00}, /* XRX200_FDMA_STETYPE Special Tag EthertypeControl Register */
|
||
|
|
+// {0x2904, 0, 16, 0x00}, /* XRX200_FDMA_STETYPE_ETYPE Special Tag Ethertype */
|
||
|
|
+// {0x2908, 0, 16, 0x00}, /* XRX200_FDMA_VTETYPE VLAN Tag EthertypeControl Register */
|
||
|
|
+// {0x2908, 0, 16, 0x00}, /* XRX200_FDMA_VTETYPE_ETYPE VLAN Tag Ethertype */
|
||
|
|
+// {0x290C, 0, 16, 0x00}, /* XRX200_FDMA_STAT_0 FDMA Status Register0 */
|
||
|
|
+// {0x290C, 0, 16, 0x00}, /* XRX200_FDMA_STAT_0_FSMS FSM states status */
|
||
|
|
+// {0x2910, 0, 16, 0x00}, /* XRX200_FDMA_IER Fetch DMA Global InterruptEnable Register */
|
||
|
|
+// {0x2910, 14, 1, 0x00}, /* XRX200_FDMA_IER_PCKD Packet Drop Interrupt Enable */
|
||
|
|
+// {0x2910, 13, 1, 0x00}, /* XRX200_FDMA_IER_PCKR Packet Ready Interrupt Enable */
|
||
|
|
+// {0x2910, 0, 8, 0x00}, /* XRX200_FDMA_IER_PCKT Packet Sent Interrupt Enable */
|
||
|
|
+// {0x2914, 0, 16, 0x00}, /* XRX200_FDMA_ISR Fetch DMA Global InterruptStatus Register */
|
||
|
|
+// {0x2914, 14, 1, 0x00}, /* XRX200_FDMA_ISR_PCKTD Packet Drop */
|
||
|
|
+// {0x2914, 13, 1, 0x00}, /* XRX200_FDMA_ISR_PCKR Packet is Ready for Transmission */
|
||
|
|
+// {0x2914, 0, 8, 0x00}, /* XRX200_FDMA_ISR_PCKT Packet Sent Event */
|
||
|
|
+// {0x2A00, 0, 16, 0x18}, /* XRX200_FDMA_PCTRL Ethernet SwitchFetch DMA Port Control Register */
|
||
|
|
+// {0x2A00, 3, 2, 0x18}, /* XRX200_FDMA_PCTRL_VLANMOD VLAN Modification Enable */
|
||
|
|
+// {0x2A00, 2, 1, 0x18}, /* XRX200_FDMA_PCTRL_DSCPRM DSCP Re-marking Enable */
|
||
|
|
+// {0x2A00, 1, 1, 0x18}, /* XRX200_FDMA_PCTRL_STEN Special Tag Insertion Enable */
|
||
|
|
+// {0x2A00, 0, 1, 0x18}, /* XRX200_FDMA_PCTRL_EN FDMA Port Enable */
|
||
|
|
+// {0x2A04, 0, 16, 0x18}, /* XRX200_FDMA_PRIO Ethernet SwitchFetch DMA Port Priority Register */
|
||
|
|
+// {0x2A04, 0, 2, 0x18}, /* XRX200_FDMA_PRIO_PRIO FDMA PRIO */
|
||
|
|
+// {0x2A08, 0, 16, 0x18}, /* XRX200_FDMA_PSTAT0 Ethernet SwitchFetch DMA Port Status Register 0 */
|
||
|
|
+// {0x2A08, 15, 1, 0x18}, /* XRX200_FDMA_PSTAT0_PKT_AVAIL Port Egress Packet Available */
|
||
|
|
+// {0x2A08, 14, 1, 0x18}, /* XRX200_FDMA_PSTAT0_POK Port Status OK */
|
||
|
|
+// {0x2A08, 0, 6, 0x18}, /* XRX200_FDMA_PSTAT0_PSEG Port Egress Segment Count */
|
||
|
|
+// {0x2A0C, 0, 16, 0x18}, /* XRX200_FDMA_PSTAT1_HDR Ethernet SwitchFetch DMA Port Status Register 1 */
|
||
|
|
+// {0x2A0C, 0, 10, 0x18}, /* XRX200_FDMA_PSTAT1_HDR_PTR Header Pointer */
|
||
|
|
+// {0x2A10, 0, 16, 0x18}, /* XRX200_FDMA_TSTAMP0 Egress TimeStamp Register 0 */
|
||
|
|
+// {0x2A10, 0, 16, 0x18}, /* XRX200_FDMA_TSTAMP0_TSTL Time Stamp [15:0] */
|
||
|
|
+// {0x2A14, 0, 16, 0x18}, /* XRX200_FDMA_TSTAMP1 Egress TimeStamp Register 1 */
|
||
|
|
+// {0x2A14, 0, 16, 0x18}, /* XRX200_FDMA_TSTAMP1_TSTH Time Stamp [31:16] */
|
||
|
|
+// {0x2D00, 0, 16, 0x00}, /* XRX200_SDMA_CTRL Ethernet Switch StoreDMA Control Register */
|
||
|
|
+// {0x2D00, 0, 1, 0x00}, /* XRX200_SDMA_CTRL_TSTEN Time Stamp Enable */
|
||
|
|
+// {0x2D04, 0, 16, 0x00}, /* XRX200_SDMA_FCTHR1 SDMA Flow Control Threshold1 Register */
|
||
|
|
+// {0x2D04, 0, 10, 0x00}, /* XRX200_SDMA_FCTHR1_THR1 Threshold 1 */
|
||
|
|
+// {0x2D08, 0, 16, 0x00}, /* XRX200_SDMA_FCTHR2 SDMA Flow Control Threshold2 Register */
|
||
|
|
+// {0x2D08, 0, 10, 0x00}, /* XRX200_SDMA_FCTHR2_THR2 Threshold 2 */
|
||
|
|
+// {0x2D0C, 0, 16, 0x00}, /* XRX200_SDMA_FCTHR3 SDMA Flow Control Threshold3 Register */
|
||
|
|
+// {0x2D0C, 0, 10, 0x00}, /* XRX200_SDMA_FCTHR3_THR3 Threshold 3 */
|
||
|
|
+// {0x2D10, 0, 16, 0x00}, /* XRX200_SDMA_FCTHR4 SDMA Flow Control Threshold4 Register */
|
||
|
|
+// {0x2D10, 0, 10, 0x00}, /* XRX200_SDMA_FCTHR4_THR4 Threshold 4 */
|
||
|
|
+// {0x2D14, 0, 16, 0x00}, /* XRX200_SDMA_FCTHR5 SDMA Flow Control Threshold5 Register */
|
||
|
|
+// {0x2D14, 0, 10, 0x00}, /* XRX200_SDMA_FCTHR5_THR5 Threshold 5 */
|
||
|
|
+// {0x2D18, 0, 16, 0x00}, /* XRX200_SDMA_FCTHR6 SDMA Flow Control Threshold6 Register */
|
||
|
|
+// {0x2D18, 0, 10, 0x00}, /* XRX200_SDMA_FCTHR6_THR6 Threshold 6 */
|
||
|
|
+// {0x2D1C, 0, 16, 0x00}, /* XRX200_SDMA_FCTHR7 SDMA Flow Control Threshold7 Register */
|
||
|
|
+// {0x2D1C, 0, 11, 0x00}, /* XRX200_SDMA_FCTHR7_THR7 Threshold 7 */
|
||
|
|
+// {0x2D20, 0, 16, 0x00}, /* XRX200_SDMA_STAT_0 SDMA Status Register0 */
|
||
|
|
+// {0x2D20, 4, 3, 0x00}, /* XRX200_SDMA_STAT_0_BPS_FILL Back Pressure Status */
|
||
|
|
+// {0x2D20, 2, 2, 0x00}, /* XRX200_SDMA_STAT_0_BPS_PNT Back Pressure Status */
|
||
|
|
+// {0x2D20, 0, 2, 0x00}, /* XRX200_SDMA_STAT_0_DROP Back Pressure Status */
|
||
|
|
+// {0x2D24, 0, 16, 0x00}, /* XRX200_SDMA_STAT_1 SDMA Status Register1 */
|
||
|
|
+// {0x2D24, 0, 10, 0x00}, /* XRX200_SDMA_STAT_1_FILL Buffer Filling Level */
|
||
|
|
+// {0x2D28, 0, 16, 0x00}, /* XRX200_SDMA_STAT_2 SDMA Status Register2 */
|
||
|
|
+// {0x2D28, 0, 16, 0x00}, /* XRX200_SDMA_STAT_2_FSMS FSM states status */
|
||
|
|
+// {0x2D2C, 0, 16, 0x00}, /* XRX200_SDMA_IER SDMA Interrupt Enable Register */
|
||
|
|
+// {0x2D2C, 15, 1, 0x00}, /* XRX200_SDMA_IER_BPEX Buffer Pointers Exceeded */
|
||
|
|
+// {0x2D2C, 14, 1, 0x00}, /* XRX200_SDMA_IER_BFULL Buffer Full */
|
||
|
|
+// {0x2D2C, 13, 1, 0x00}, /* XRX200_SDMA_IER_FERR Frame Error */
|
||
|
|
+// {0x2D2C, 0, 8, 0x00}, /* XRX200_SDMA_IER_FRX Frame Received Successfully */
|
||
|
|
+// {0x2D30, 0, 16, 0x00}, /* XRX200_SDMA_ISR SDMA Interrupt Status Register */
|
||
|
|
+// {0x2D30, 15, 1, 0x00}, /* XRX200_SDMA_ISR_BPEX Packet Descriptors Exceeded */
|
||
|
|
+// {0x2D30, 14, 1, 0x00}, /* XRX200_SDMA_ISR_BFULL Buffer Full */
|
||
|
|
+// {0x2D30, 13, 1, 0x00}, /* XRX200_SDMA_ISR_FERR Frame Error */
|
||
|
|
+// {0x2D30, 0, 8, 0x00}, /* XRX200_SDMA_ISR_FRX Frame Received Successfully */
|
||
|
|
+// {0x2F00, 0, 16, 0x18}, /* XRX200_SDMA_PCTRL Ethernet SwitchStore DMA Port Control Register */
|
||
|
|
+// {0x2F00, 13, 2, 0x18}, /* XRX200_SDMA_PCTRL_DTHR Drop Threshold Selection */
|
||
|
|
+// {0x2F00, 11, 2, 0x18}, /* XRX200_SDMA_PCTRL_PTHR Pause Threshold Selection */
|
||
|
|
+// {0x2F00, 10, 1, 0x18}, /* XRX200_SDMA_PCTRL_PHYEFWD Forward PHY Error Frames */
|
||
|
|
+// {0x2F00, 9, 1, 0x18}, /* XRX200_SDMA_PCTRL_ALGFWD Forward Alignment Error Frames */
|
||
|
|
+// {0x2F00, 8, 1, 0x18}, /* XRX200_SDMA_PCTRL_LENFWD Forward Length Errored Frames */
|
||
|
|
+// {0x2F00, 7, 1, 0x18}, /* XRX200_SDMA_PCTRL_OSFWD Forward Oversized Frames */
|
||
|
|
+// {0x2F00, 6, 1, 0x18}, /* XRX200_SDMA_PCTRL_USFWD Forward Undersized Frames */
|
||
|
|
+// {0x2F00, 5, 1, 0x18}, /* XRX200_SDMA_PCTRL_FCSIGN Ignore FCS Errors */
|
||
|
|
+// {0x2F00, 4, 1, 0x18}, /* XRX200_SDMA_PCTRL_FCSFWD Forward FCS Errored Frames */
|
||
|
|
+// {0x2F00, 3, 1, 0x18}, /* XRX200_SDMA_PCTRL_PAUFWD Pause Frame Forwarding */
|
||
|
|
+// {0x2F00, 2, 1, 0x18}, /* XRX200_SDMA_PCTRL_MFCEN Metering Flow Control Enable */
|
||
|
|
+// {0x2F00, 1, 1, 0x18}, /* XRX200_SDMA_PCTRL_FCEN Flow Control Enable */
|
||
|
|
+// {0x2F00, 0, 1, 0x18}, /* XRX200_SDMA_PCTRL_PEN Port Enable */
|
||
|
|
+// {0x2F04, 0, 16, 0x18}, /* XRX200_SDMA_PRIO Ethernet SwitchStore DMA Port Priority Register */
|
||
|
|
+// {0x2F04, 0, 2, 0x18}, /* XRX200_SDMA_PRIO_PRIO SDMA PRIO */
|
||
|
|
+// {0x2F08, 0, 16, 0x18}, /* XRX200_SDMA_PSTAT0_HDR Ethernet SwitchStore DMA Port Status Register 0 */
|
||
|
|
+// {0x2F08, 0, 10, 0x18}, /* XRX200_SDMA_PSTAT0_HDR_PTR Port Ingress Queue Header Pointer */
|
||
|
|
+// {0x2F0C, 0, 16, 0x18}, /* XRX200_SDMA_PSTAT1 Ethernet SwitchStore DMA Port Status Register 1 */
|
||
|
|
+// {0x2F0C, 0, 10, 0x18}, /* XRX200_SDMA_PSTAT1_PPKT Port Ingress Packet Count */
|
||
|
|
+// {0x2F10, 0, 16, 0x18}, /* XRX200_SDMA_TSTAMP0 Ingress TimeStamp Register 0 */
|
||
|
|
+// {0x2F10, 0, 16, 0x18}, /* XRX200_SDMA_TSTAMP0_TSTL Time Stamp [15:0] */
|
||
|
|
+// {0x2F14, 0, 16, 0x18}, /* XRX200_SDMA_TSTAMP1 Ingress TimeStamp Register 1 */
|
||
|
|
+// {0x2F14, 0, 16, 0x18}, /* XRX200_SDMA_TSTAMP1_TSTH Time Stamp [31:16] */
|
||
|
|
+};
|
||
|
|
+
|
||
|
|
+
|