openwrt-owl/target/linux/sunxi/patches-4.1/119-mtd-nand-ecc-for-samsung.patch

From 3fecbdac2fe503fb6896ec08dd2474958d198d62 Mon Sep 17 00:00:00 2001
From: Hans de Goede <hdegoede@redhat.com>
Date: Sun, 24 May 2015 12:01:16 +0200
Subject: [PATCH] mtd: nand: nand_decode_ext_id(): Fill in ecc strength and
 size for Samsung

On some nand controllers with hw-ecc the controller code wants to know the
ecc strength and size and having these as 0, 0 is not accepted.

Specifying these in devicetree is possible but undesirable as the nand
may be different in different production runs of the same board, so it
is better to get this info from the nand id where possible.

This commit adds code to read the ecc strength and size from the nand for
Samsung extended-id nands. This code is based on the info for the 5th
id byte in the datasheets for the following Samsung nands: K9GAG08U0E,
K9GAG08U0F, K9GAG08X0D, K9GBG08U0A, K9GBG08U0B. These all use these bits
in the exact same way.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
---
 drivers/mtd/nand/nand_base.c | 35 +++++++++++++++++++++++++++++++++++
 1 file changed, 35 insertions(+)

--- a/drivers/mtd/nand/nand_base.c
+++ b/drivers/mtd/nand/nand_base.c
@@ -4063,6 +4063,41 @@ static void nand_decode_ext_id(struct mt
 		mtd->erasesize = (128 * 1024) <<
 			(((extid >> 1) & 0x04) | (extid & 0x03));
 		*busw = 0;
+		/* Calc ecc strength and size from 5th id byte*/
+		switch ((id_data[4] >> 4) & 0x07) {
+		case 0:
+			chip->ecc_strength_ds = 1;
+			chip->ecc_step_ds = 512;
+			break;
+		case 1:
+			chip->ecc_strength_ds = 2;
+			chip->ecc_step_ds = 512;
+			break;
+		case 2:
+			chip->ecc_strength_ds = 4;
+			chip->ecc_step_ds = 512;
+			break;
+		case 3:
+			chip->ecc_strength_ds = 8;
+			chip->ecc_step_ds = 512;
+			break;
+		case 4:
+			chip->ecc_strength_ds = 16;
+			chip->ecc_step_ds = 512;
+			break;
+		case 5:
+			chip->ecc_strength_ds = 24;
+			chip->ecc_step_ds = 1024;
+			break;
+		case 6:
+			chip->ecc_strength_ds = 40;
+			chip->ecc_step_ds = 1024;
+			break;
+		case 7:
+			chip->ecc_strength_ds = 60;
+			chip->ecc_step_ds = 1024;
+			break;
+		}
 	} else if (id_len == 6 && id_data[0] == NAND_MFR_HYNIX &&
 			!nand_is_slc(chip)) {
 		unsigned int tmp;