openwrt-owl/target/linux/ramips/patches-3.8/0009-MIPS-ralink-adds-rt305...

172 lines
3.6 KiB
Diff
Raw Normal View History

From 5644da4f635a30fc03b4f12d81b2197d716d9cef Mon Sep 17 00:00:00 2001
From: John Crispin <blogic@openwrt.org>
Date: Tue, 22 Jan 2013 20:19:33 +0100
Subject: [PATCH 09/14] MIPS: ralink: adds rt305x devicetree
This adds the devicetree file that describes the rt305x evaluation kit.
Signed-off-by: John Crispin <blogic@openwrt.org>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
Patchwork: http://patchwork.linux-mips.org/patch/4898/
---
arch/mips/ralink/dts/rt3050.dtsi | 96 ++++++++++++++++++++++++++++++++++
arch/mips/ralink/dts/rt3052_eval.dts | 52 ++++++++++++++++++
2 files changed, 148 insertions(+)
create mode 100644 arch/mips/ralink/dts/rt3050.dtsi
create mode 100644 arch/mips/ralink/dts/rt3052_eval.dts
--- /dev/null
+++ b/arch/mips/ralink/dts/rt3050.dtsi
@@ -0,0 +1,96 @@
+/ {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "ralink,rt3050-soc", "ralink,rt3052-soc";
+
+ cpus {
+ cpu@0 {
+ compatible = "mips,mips24KEc";
+ };
+ };
+
+ chosen {
+ bootargs = "console=ttyS0,57600 init=/init";
+ };
+
+ palmbus@10000000 {
+ compatible = "palmbus";
+ reg = <0x10000000 0x200000>;
+ ranges = <0x0 0x10000000 0x1FFFFF>;
+
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ sysc@0 {
+ compatible = "ralink,rt3052-sysc", "ralink,rt3050-sysc";
+ reg = <0x0 0x100>;
+ };
+
+ timer@100 {
+ compatible = "ralink,rt3052-wdt", "ralink,rt2880-wdt";
+ reg = <0x100 0x100>;
+ };
+
+ intc: intc@200 {
+ compatible = "ralink,rt3052-intc", "ralink,rt2880-intc";
+ reg = <0x200 0x100>;
+
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ };
+
+ memc@300 {
+ compatible = "ralink,rt3052-memc", "ralink,rt3050-memc";
+ reg = <0x300 0x100>;
+ };
+
+ gpio0: gpio@600 {
+ compatible = "ralink,rt3052-gpio", "ralink,rt2880-gpio";
+ reg = <0x600 0x34>;
+
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ ralink,ngpio = <24>;
+ ralink,regs = [ 00 04 08 0c
+ 20 24 28 2c
+ 30 34 ];
+ };
+
+ gpio1: gpio@638 {
+ compatible = "ralink,rt3052-gpio", "ralink,rt2880-gpio";
+ reg = <0x638 0x24>;
+
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ ralink,ngpio = <16>;
+ ralink,regs = [ 00 04 08 0c
+ 10 14 18 1c
+ 20 24 ];
+ };
+
+ gpio2: gpio@660 {
+ compatible = "ralink,rt3052-gpio", "ralink,rt2880-gpio";
+ reg = <0x660 0x24>;
+
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ ralink,ngpio = <12>;
+ ralink,regs = [ 00 04 08 0c
+ 10 14 18 1c
+ 20 24 ];
+ };
+
+ uartlite@c00 {
+ compatible = "ralink,rt3052-uart", "ralink,rt2880-uart", "ns16550a";
+ reg = <0xc00 0x100>;
+
+ interrupt-parent = <&intc>;
+ interrupts = <12>;
+
+ reg-shift = <2>;
+ };
+ };
+};
--- /dev/null
+++ b/arch/mips/ralink/dts/rt3052_eval.dts
@@ -0,0 +1,52 @@
+/dts-v1/;
+
+/include/ "rt3050.dtsi"
+
+/ {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "ralink,rt3052-eval-board", "ralink,rt3052-soc";
+ model = "Ralink RT3052 evaluation board";
+
+ memory@0 {
+ reg = <0x0 0x2000000>;
+ };
+
+ palmbus@10000000 {
+ sysc@0 {
+ ralink,pinmux = "uartlite", "spi";
+ ralink,uartmux = "gpio";
+ ralink,wdtmux = <0>;
+ };
+ };
+
+ cfi@1f000000 {
+ compatible = "cfi-flash";
+ reg = <0x1f000000 0x800000>;
+
+ bank-width = <2>;
+ device-width = <2>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "uboot";
+ reg = <0x0 0x30000>;
+ read-only;
+ };
+ partition@30000 {
+ label = "uboot-env";
+ reg = <0x30000 0x10000>;
+ read-only;
+ };
+ partition@40000 {
+ label = "calibration";
+ reg = <0x40000 0x10000>;
+ read-only;
+ };
+ partition@50000 {
+ label = "linux";
+ reg = <0x50000 0x7b0000>;
+ };
+ };
+};