openwrt-owl/target/linux/ramips/dts/HC5861.dts

/dts-v1/;

/include/ "HC5XXX.dtsi"

/ {
	compatible = "HC5861", "ralink,mt7620a-soc";
	model = "HiWiFi HC5861";

	ethernet@10100000 {
		status = "okay";
		mtd-mac-address = <&factory 0x4>;
		pinctrl-names = "default";
		pinctrl-0 = <&rgmii1_pins &rgmii2_pins &mdio_pins>;
		ralink,port-map = "wllll";

		port@4 {
			status = "okay";
			phy-handle = <&phy4>;
			phy-mode = "rgmii";
		};

		port@5 {
			status = "okay";
			phy-handle = <&phy5>;
			phy-mode = "rgmii";
		};

		mdio-bus {
			status = "okay";

			phy4: ethernet-phy@4 {
				reg = <4>;
				phy-mode = "rgmii";
			};

			phy5: ethernet-phy@5 {
				reg = <5>;
				phy-mode = "rgmii";
			};
		};
	};

	gsw@10110000 {
		ralink,port4 = "gmac";
	};

	gpio-leds {
		compatible = "gpio-leds";

		system {
			label = "hc5861:blue:system";
			gpios = <&gpio0 9 1>;
		};

		wlan2g {
			label = "hc5861:blue:wlan2g";
			gpios = <&gpio0 11 1>;
		};

		internet {
			label = "hc5861:blue:internet";
			gpios = <&gpio3 0 1>;
		};

		wlan5g {
			label = "hc5861:blue:wlan5g";
			gpios = <&gpio0 7 1>;
		};

		turbo {
			label = "hc5861:blue:turbo";
			gpios = <&gpio0 10 1>;
		};
	};

	gpio_export {
		compatible = "gpio-export";
		#size-cells = <0>;

		usbpower {
			gpio-export,name = "usbpower";
			gpio-export,output = <0>;
			gpios = <&gpio0 13 0>;
		};

		sdpower {
			gpio-export,name = "sdpower";
			gpio-export,output = <0>;
			gpios = <&gpio0 8 0>;
		};
	};
};