hak5
/
openwrt-owl
mirror of https://github.com/hak5/openwrt-owl.git
1
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity
openwrt-owl/target/linux/ar71xx/mikrotik/config-default

129 lines
4.5 KiB
Plaintext
Raw Normal View History

ar71xx/mikrotik: enable the AT803x PHY driver It will be used on the RB91x boards. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 40508
2014-04-13 20:41:51 +00:00
CONFIG_AT803X_PHY=y
ar71xx: disable non Mikrotik boards in the mikrotik subtarget Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 38597
2013-10-30 06:54:54 +00:00
# CONFIG_ATH79_DEV_DSA is not set
# CONFIG_ATH79_MACH_ALFA_AP96 is not set
# CONFIG_ATH79_MACH_ALFA_NX is not set
# CONFIG_ATH79_MACH_ALL0258N is not set
# CONFIG_ATH79_MACH_ALL0315N is not set
# CONFIG_ATH79_MACH_AP113 is not set
# CONFIG_ATH79_MACH_AP121 is not set
# CONFIG_ATH79_MACH_AP132 is not set
# CONFIG_ATH79_MACH_AP136 is not set
# CONFIG_ATH79_MACH_AP81 is not set
# CONFIG_ATH79_MACH_AP83 is not set
# CONFIG_ATH79_MACH_AP96 is not set
# CONFIG_ATH79_MACH_ARCHER_C7 is not set
# CONFIG_ATH79_MACH_AW_NR580 is not set
# CONFIG_ATH79_MACH_CAP4200AG is not set
# CONFIG_ATH79_MACH_CARAMBOLA2 is not set
# CONFIG_ATH79_MACH_DB120 is not set
# CONFIG_ATH79_MACH_DIR_505_A1 is not set
# CONFIG_ATH79_MACH_DIR_600_A1 is not set
# CONFIG_ATH79_MACH_DIR_615_C1 is not set
# CONFIG_ATH79_MACH_DIR_825_B1 is not set
# CONFIG_ATH79_MACH_DIR_825_C1 is not set
# CONFIG_ATH79_MACH_EAP7660D is not set
# CONFIG_ATH79_MACH_EW_DORIN is not set
# CONFIG_ATH79_MACH_HORNET_UB is not set
# CONFIG_ATH79_MACH_JA76PF is not set
# CONFIG_ATH79_MACH_JWAP003 is not set
# CONFIG_ATH79_MACH_MR600 is not set
# CONFIG_ATH79_MACH_MYNET_N600 is not set
# CONFIG_ATH79_MACH_MZK_W04NU is not set
# CONFIG_ATH79_MACH_MZK_W300NH is not set
# CONFIG_ATH79_MACH_NBG460N is not set
# CONFIG_ATH79_MACH_OM2P is not set
# CONFIG_ATH79_MACH_PB42 is not set
# CONFIG_ATH79_MACH_PB44 is not set
# CONFIG_ATH79_MACH_PB92 is not set
ar71xx: disable routerboard support in the generic subtarget, enable it for the nand subtarget only Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 36879
2013-06-07 13:42:50 +00:00
CONFIG_ATH79_MACH_RB2011=y
CONFIG_ATH79_MACH_RB4XX=y
CONFIG_ATH79_MACH_RB750=y
ar71xx: add initial support for the Mikrotik RB911G/RB912UAG boards It is only on RB911G-5HPnD and RB912UAG-5HPnD boards. The LEDs and the USB port is not working yet. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 39102
2013-12-16 18:08:51 +00:00
CONFIG_ATH79_MACH_RB91X=y
ar71xx: disable routerboard support in the generic subtarget, enable it for the nand subtarget only Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 36879
2013-06-07 13:42:50 +00:00
CONFIG_ATH79_MACH_RB95X=y
ar71xx: Add support for MikroTik RouterBOARD SXT Lite This patch adds support for the MikroTik RouterBOARD SXT Lite. The new RB911L series is also supported as a result. v2 of this patch fixes the wmac offset to match what is on the sticker. v3 refreshes the patch against r41148 and defines the power led as the status led in diag.sh v4 refreshes the patch against r41353 and fixes the patch path issue to make git am work correctly v5 selects the kernel config option in the mikrotik profile rather than in the main ar71xx config Signed-off-by: Matthew Reeve <mreeve@tenxnetworks.com> Signed-off-by: John Crispin <blogic@openwrt.org> SVN-Revision: 41450
2014-07-01 13:38:30 +00:00
CONFIG_ATH79_MACH_RBSXTLITE=y
ar71xx: disable non Mikrotik boards in the mikrotik subtarget Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 38597
2013-10-30 06:54:54 +00:00
# CONFIG_ATH79_MACH_RW2458N is not set
# CONFIG_ATH79_MACH_TEW_632BRP is not set
# CONFIG_ATH79_MACH_TEW_673GRU is not set
# CONFIG_ATH79_MACH_TEW_712BR is not set
# CONFIG_ATH79_MACH_TEW_732BR is not set
# CONFIG_ATH79_MACH_TL_MR11U is not set
# CONFIG_ATH79_MACH_TL_MR13U is not set
# CONFIG_ATH79_MACH_TL_MR3020 is not set
# CONFIG_ATH79_MACH_TL_MR3X20 is not set
# CONFIG_ATH79_MACH_TL_WA901ND is not set
# CONFIG_ATH79_MACH_TL_WA901ND_V2 is not set
# CONFIG_ATH79_MACH_TL_WDR3500 is not set
# CONFIG_ATH79_MACH_TL_WDR4300 is not set
# CONFIG_ATH79_MACH_TL_WR1041N_V2 is not set
# CONFIG_ATH79_MACH_TL_WR1043ND is not set
# CONFIG_ATH79_MACH_TL_WR2543N is not set
# CONFIG_ATH79_MACH_TL_WR703N is not set
# CONFIG_ATH79_MACH_TL_WR720N_V3 is not set
# CONFIG_ATH79_MACH_TL_WR741ND is not set
# CONFIG_ATH79_MACH_TL_WR741ND_V4 is not set
# CONFIG_ATH79_MACH_TL_WR841N_V1 is not set
# CONFIG_ATH79_MACH_TL_WR841N_V8 is not set
# CONFIG_ATH79_MACH_TL_WR941ND is not set
# CONFIG_ATH79_MACH_UBNT is not set
# CONFIG_ATH79_MACH_UBNT_XM is not set
# CONFIG_ATH79_MACH_WHR_HP_G300N is not set
# CONFIG_ATH79_MACH_WLAE_AG300N is not set
# CONFIG_ATH79_MACH_WNDAP360 is not set
# CONFIG_ATH79_MACH_WNDR3700 is not set
# CONFIG_ATH79_MACH_WNDR4300 is not set
# CONFIG_ATH79_MACH_WNR2000 is not set
# CONFIG_ATH79_MACH_WNR2000_V3 is not set
# CONFIG_ATH79_MACH_WNR2200 is not set
# CONFIG_ATH79_MACH_WP543 is not set
# CONFIG_ATH79_MACH_WPE72 is not set
# CONFIG_ATH79_MACH_WRT160NL is not set
# CONFIG_ATH79_MACH_WRT400N is not set
# CONFIG_ATH79_MACH_WZR_HP_AG300H is not set
# CONFIG_ATH79_MACH_WZR_HP_G300NH is not set
# CONFIG_ATH79_MACH_WZR_HP_G300NH2 is not set
# CONFIG_ATH79_MACH_WZR_HP_G450H is not set
# CONFIG_ATH79_MACH_ZCN_1523H is not set
# CONFIG_ATH79_NVRAM is not set
ar71xx: disable routerboard support in the generic subtarget, enable it for the nand subtarget only Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 36879
2013-06-07 13:42:50 +00:00
CONFIG_ATH79_ROUTERBOOT=y
ar71xx: disable unused file system drivers in the nand subtarget SVN-Revision: 31027
2012-03-19 15:57:07 +00:00
CONFIG_CMDLINE="rootfstype=yaffs noinitrd"
ar71xx/mikrotik: enable the 74x164 GPIO driver That will be used to drive the 74HC595 serial-in/parallel-out 8-bits shift register which can be found on some RouterBOARDs. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 39702
2014-02-23 08:11:50 +00:00
CONFIG_GPIO_74X164=y
ar71xx/mikrotik: enable the GPIO latch driver Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 39698
2014-02-22 18:05:31 +00:00
CONFIG_GPIO_LATCH=y
ar71xx: disable unused file system drivers in the nand subtarget SVN-Revision: 31027
2012-03-19 15:57:07 +00:00
# CONFIG_JFFS2_FS is not set
ar71xx: disable routerboard support in the generic subtarget, enable it for the nand subtarget only Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 36879
2013-06-07 13:42:50 +00:00
CONFIG_LEDS_RB750=y
ar71xx/mikrotik: enable small sector erase in the m25p80 driver The serial flash devices used on the ROuterBOARDs are supporting 4KiB erase blocks. Enable the small sector erase option in the m25p80 driver to avoid superfluous erase/write of adjacent blocks. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 39696
2014-02-22 16:26:55 +00:00
CONFIG_M25PXX_PREFER_SMALL_SECTOR_ERASE=y
linux: ar71xx: add support for Mikrotik Routerboard RB493G SVN-Revision: 28423
2011-10-11 23:05:16 +00:00
CONFIG_MDIO_BITBANG=y
CONFIG_MDIO_GPIO=y
ar71xx/mikrotik: disable unused MTD options Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 39080
2013-12-16 07:39:22 +00:00
# CONFIG_MTD_CFI is not set
CONFIG_MTD_CFI_I2=y
CONFIG_MTD_MAP_BANK_WIDTH_1=y
CONFIG_MTD_MAP_BANK_WIDTH_4=y
# CONFIG_MTD_MYLOADER_PARTS is not set
ar71xx: add a new subtarget for nand based devices - saves around 44k on the lzma compressed generic kernel image SVN-Revision: 21396
2010-05-07 16:20:32 +00:00
CONFIG_MTD_NAND=y
ar71xx: register the NAND controller device on the RB2011 SVN-Revision: 33388
2012-09-13 07:26:26 +00:00
CONFIG_MTD_NAND_AR934X=y
ar71xx: sync kernel configs SVN-Revision: 31026
2012-03-19 15:57:06 +00:00
CONFIG_MTD_NAND_ECC=y
ar71xx: add a new subtarget for nand based devices - saves around 44k on the lzma compressed generic kernel image SVN-Revision: 21396
2010-05-07 16:20:32 +00:00
CONFIG_MTD_NAND_RB4XX=y
CONFIG_MTD_NAND_RB750=y
ar71xx: add initial support for the Mikrotik RB911G/RB912UAG boards It is only on RB911G-5HPnD and RB912UAG-5HPnD boards. The LEDs and the USB port is not working yet. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 39102
2013-12-16 18:08:51 +00:00
CONFIG_MTD_NAND_RB91X=y
ar71xx/mikrotik: disable unused MTD options Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 39080
2013-12-16 07:39:22 +00:00
# CONFIG_MTD_REDBOOT_PARTS is not set
ar71xx: sync kernel configs SVN-Revision: 31026
2012-03-19 15:57:06 +00:00
# CONFIG_MTD_SM_COMMON is not set
ar71xx/mikrotik: disable unused MTD options Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 39080
2013-12-16 07:39:22 +00:00
# CONFIG_MTD_TPLINK_PARTS is not set
ar71xx: disable unused file system drivers in the nand subtarget SVN-Revision: 31027
2012-03-19 15:57:07 +00:00
# CONFIG_OVERLAYFS_FS is not set
ar71xx: disable routerboard support in the generic subtarget, enable it for the nand subtarget only Signed-off-by: Felix Fietkau <nbd@openwrt.org> SVN-Revision: 36879
2013-06-07 13:42:50 +00:00
CONFIG_RLE_DECOMPRESS=y
ar71xx: disable non Mikrotik boards in the mikrotik subtarget Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 38597
2013-10-30 06:54:54 +00:00
# CONFIG_SOC_AR913X is not set
# CONFIG_SOC_AR933X is not set
# CONFIG_SOC_QCA955X is not set
ar71xx: rewrite SPI drivers for the RB4xx boards * add a new SPI controller driver * add SPI driver for the CPLD chip * convert the NAND driver * enable the mikroSD slot * enable more LEDs SVN-Revision: 22863
2010-08-31 20:13:47 +00:00
CONFIG_SPI_RB4XX=y
CONFIG_SPI_RB4XX_CPLD=y
ar71xx: disable unused file system drivers in the nand subtarget SVN-Revision: 31027
2012-03-19 15:57:07 +00:00
# CONFIG_SQUASHFS is not set
ar71xx: add a new subtarget for nand based devices - saves around 44k on the lzma compressed generic kernel image SVN-Revision: 21396
2010-05-07 16:20:32 +00:00
CONFIG_YAFFS_9BYTE_TAGS=y
CONFIG_YAFFS_ALWAYS_CHECK_CHUNK_ERASED=y
CONFIG_YAFFS_AUTO_YAFFS2=y
ar71xx: sync kernel configs SVN-Revision: 31026
2012-03-19 15:57:06 +00:00
# CONFIG_YAFFS_DISABLE_BACKGROUND is not set
# CONFIG_YAFFS_DISABLE_BLOCK_REFRESHING is not set
# CONFIG_YAFFS_DISABLE_TAGS_ECC is not set
# CONFIG_YAFFS_EMPTY_LOST_AND_FOUND is not set
ar71xx: add a new subtarget for nand based devices - saves around 44k on the lzma compressed generic kernel image SVN-Revision: 21396
2010-05-07 16:20:32 +00:00
CONFIG_YAFFS_FS=y
ar71xx: sync kernel configs SVN-Revision: 31026
2012-03-19 15:57:06 +00:00
CONFIG_YAFFS_XATTR=y
ar71xx: add a new subtarget for nand based devices - saves around 44k on the lzma compressed generic kernel image SVN-Revision: 21396
2010-05-07 16:20:32 +00:00
CONFIG_YAFFS_YAFFS1=y
CONFIG_YAFFS_YAFFS2=y