openwrt-owl/target/linux/brcm2708/patches-4.4/0144-BCM270X_DT-Add-dtparams-for-the-SD-interface.patch

From 5920a56447c13b86d073a388be113c28c2a8681d Mon Sep 17 00:00:00 2001
From: Phil Elwell <phil@raspberrypi.org>
Date: Fri, 12 Feb 2016 15:38:00 +0000
Subject: [PATCH 144/304] BCM270X_DT: Add dtparams for the SD interface

Add new base dtparams sd_overclock, sd_force_pio, sd_pio_limit
and sd_debug.
---
 arch/arm/boot/dts/bcm2708-rpi-b-plus.dts       |  4 ++++
 arch/arm/boot/dts/bcm2708-rpi-b.dts            |  4 ++++
 arch/arm/boot/dts/bcm2708-rpi-cm.dts           |  1 -
 arch/arm/boot/dts/bcm2708-rpi-cm.dtsi          | 13 +++++++++++++
 arch/arm/boot/dts/bcm2708_common.dtsi          |  2 ++
 arch/arm/boot/dts/bcm2709-rpi-2-b.dts          |  4 ++++
 arch/arm/boot/dts/overlays/README              | 11 ++++++++++-
 arch/arm/boot/dts/overlays/mmc-overlay.dts     |  1 -
 arch/arm/boot/dts/overlays/sdhost-overlay.dts  | 27 +++++++++++++-------------
 arch/arm/boot/dts/overlays/sdtweak-overlay.dts | 14 ++++++-------
 10 files changed, 58 insertions(+), 23 deletions(-)

--- a/arch/arm/boot/dts/bcm2708-rpi-b-plus.dts
+++ b/arch/arm/boot/dts/bcm2708-rpi-b-plus.dts
@@ -141,5 +141,9 @@
 		audio = <&audio>,"status";
 		watchdog = <&watchdog>,"status";
 		random = <&random>,"status";
+		sd_overclock = <&sdhost>,"brcm,overclock-50:0";
+		sd_force_pio = <&sdhost>,"brcm,force-pio?";
+		sd_pio_limit = <&sdhost>,"brcm,pio-limit:0";
+		sd_debug     = <&sdhost>,"brcm,debug";
 	};
 };
--- a/arch/arm/boot/dts/bcm2708-rpi-b.dts
+++ b/arch/arm/boot/dts/bcm2708-rpi-b.dts
@@ -131,5 +131,9 @@
 		audio = <&audio>,"status";
 		watchdog = <&watchdog>,"status";
 		random = <&random>,"status";
+		sd_overclock = <&sdhost>,"brcm,overclock-50:0";
+		sd_force_pio = <&sdhost>,"brcm,force-pio?";
+		sd_pio_limit = <&sdhost>,"brcm,pio-limit:0";
+		sd_debug     = <&sdhost>,"brcm,debug";
 	};
 };
--- a/arch/arm/boot/dts/bcm2708-rpi-cm.dts
+++ b/arch/arm/boot/dts/bcm2708-rpi-cm.dts
@@ -97,6 +97,5 @@
 		i2c0_baudrate = <&i2c0>,"clock-frequency:0";
 		i2c1_baudrate = <&i2c1>,"clock-frequency:0";
 		i2c2_baudrate = <&i2c2>,"clock-frequency:0";
-		core_freq = <&clk_core>,"clock-frequency:0";
 	};
 };
--- a/arch/arm/boot/dts/bcm2708-rpi-cm.dtsi
+++ b/arch/arm/boot/dts/bcm2708-rpi-cm.dtsi
@@ -7,6 +7,13 @@
 	};
 };
 
+&gpio {
+	sdhost_pins: sdhost_pins {
+		brcm,pins = <48 49 50 51 52 53>;
+		brcm,function = <4>; /* alt0 */
+	};
+};
+
 &leds {
 	act_led: act {
 		label = "led0";
@@ -29,6 +36,8 @@
 
 / {
 	__overrides__ {
+		core_freq = <&clk_core>,"clock-frequency:0";
+
 		act_led_gpio = <&act_led>,"gpios:4";
 		act_led_activelow = <&act_led>,"gpios:8";
 		act_led_trigger = <&act_led>,"linux,default-trigger";
@@ -36,5 +45,9 @@
 		audio = <&audio>,"status";
 		watchdog = <&watchdog>,"status";
 		random = <&random>,"status";
+		sd_overclock = <&sdhost>,"brcm,overclock-50:0";
+		sd_force_pio = <&sdhost>,"brcm,force-pio?";
+		sd_pio_limit = <&sdhost>,"brcm,pio-limit:0";
+		sd_debug     = <&sdhost>,"brcm,debug";
 	};
 };
--- a/arch/arm/boot/dts/bcm2708_common.dtsi
+++ b/arch/arm/boot/dts/bcm2708_common.dtsi
@@ -135,6 +135,7 @@
 			dmas = <&dma 13>,
 			       <&dma 13>;
 			dma-names = "tx", "rx";
+			brcm,overclock-50 = <0>;
 			brcm,pio-limit = <1>;
 			status = "disabled";
 		};
@@ -203,6 +204,7 @@
 			dmas = <&dma 11>,
 			       <&dma 11>;
 			dma-names = "tx", "rx";
+			brcm,overclock-50 = <0>;
 			status = "disabled";
 		};
 
--- a/arch/arm/boot/dts/bcm2709-rpi-2-b.dts
+++ b/arch/arm/boot/dts/bcm2709-rpi-2-b.dts
@@ -141,5 +141,9 @@
 		audio = <&audio>,"status";
 		watchdog = <&watchdog>,"status";
 		random = <&random>,"status";
+		sd_overclock = <&sdhost>,"brcm,overclock-50:0";
+		sd_force_pio = <&sdhost>,"brcm,force-pio?";
+		sd_pio_limit = <&sdhost>,"brcm,pio-limit:0";
+		sd_debug     = <&sdhost>,"brcm,debug";
 	};
 };
--- a/arch/arm/boot/dts/overlays/README
+++ b/arch/arm/boot/dts/overlays/README
@@ -112,6 +112,16 @@ Params:
         random                  Set to "on" to enable the hardware random
                                 number generator (default "on")
 
+        sd_overclock            Clock (in MHz) to use when the MMC framework
+                                requests 50MHz
+
+        sd_force_pio            Disable DMA support for SD driver (default off)
+
+        sd_pio_limit            Number of blocks above which to use DMA for
+                                SD card (default 1)
+
+        sd_debug                Enable debug output from SD driver (default off)
+
         uart0                   Set to "off" to disable uart0 (default "on")
 
         watchdog                Set to "on" to enable the hardware watchdog
@@ -443,7 +453,6 @@ Info:   Selects the bcm2835-mmc SD/MMC d
 Load:   dtoverlay=mmc,<param>=<val>
 Params: overclock_50            Clock (in MHz) to use when the MMC framework
                                 requests 50MHz
-        force_pio               Disable DMA support
 
 
 Name:   mz61581
--- a/arch/arm/boot/dts/overlays/mmc-overlay.dts
+++ b/arch/arm/boot/dts/overlays/mmc-overlay.dts
@@ -34,6 +34,5 @@
 
 	__overrides__ {
 		overclock_50     = <&frag0>,"brcm,overclock-50:0";
-		force_pio        = <&frag0>,"brcm,force-pio?";
 	};
 };
--- a/arch/arm/boot/dts/overlays/sdhost-overlay.dts
+++ b/arch/arm/boot/dts/overlays/sdhost-overlay.dts
@@ -1,19 +1,14 @@
 /dts-v1/;
 /plugin/;
 
+/* Provide backwards compatible aliases for the old sdhost dtparams. */
+
 /{
 	compatible = "brcm,bcm2708";
 
 	fragment@0 {
-		target = <&mmc>;
-		__overlay__ {
-			status = "disabled";
-		};
-	};
-
-	fragment@1 {
 		target = <&sdhost>;
-		frag1: __overlay__ {
+		frag0: __overlay__ {
 			brcm,overclock-50 = <0>;
 			brcm,pio-limit = <1>;
 			brcm,debug-flags = <0>;
@@ -21,11 +16,17 @@
 		};
 	};
 
+	fragment@1 {
+		target = <&mmc>;
+		__overlay__ {
+			status = "disabled";
+		};
+	};
+
 	__overrides__ {
-		overclock_50     = <&frag1>,"brcm,overclock-50:0";
-		force_pio        = <&frag1>,"brcm,force-pio?";
-		pio_limit        = <&frag1>,"brcm,pio-limit:0";
-		debug            = <&frag1>,"brcm,debug?";
-		debug_flags      = <&frag1>,"brcm,debug-flags:0";
+		overclock_50     = <&frag0>,"brcm,overclock-50:0";
+		force_pio        = <&frag0>,"brcm,force-pio?";
+		pio_limit        = <&frag0>,"brcm,pio-limit:0";
+		debug            = <&frag0>,"brcm,debug?";
 	};
 };
--- a/arch/arm/boot/dts/overlays/sdtweak-overlay.dts
+++ b/arch/arm/boot/dts/overlays/sdtweak-overlay.dts
@@ -1,23 +1,23 @@
 /dts-v1/;
 /plugin/;
 
+/* Provide backwards compatible aliases for the old sdhost dtparams. */
+
 /{
 	compatible = "brcm,bcm2708";
 
 	fragment@0 {
 		target = <&sdhost>;
-		frag1: __overlay__ {
+		frag0: __overlay__ {
 			brcm,overclock-50 = <0>;
 			brcm,pio-limit = <1>;
-			brcm,debug-flags = <0>;
 		};
 	};
 
 	__overrides__ {
-		overclock_50     = <&frag1>,"brcm,overclock-50:0";
-		force_pio        = <&frag1>,"brcm,force-pio?";
-		pio_limit        = <&frag1>,"brcm,pio-limit:0";
-		debug            = <&frag1>,"brcm,debug?";
-		debug_flags      = <&frag1>,"brcm,debug-flags:0";
+		overclock_50     = <&frag0>,"brcm,overclock-50:0";
+		force_pio        = <&frag0>,"brcm,force-pio?";
+		pio_limit        = <&frag0>,"brcm,pio-limit:0";
+		debug            = <&frag0>,"brcm,debug?";
 	};
 };