openwrt-owl/target/linux/brcm47xx/image/Makefile

#
# Copyright (C) 2006-2012 OpenWrt.org
#
# This is free software, licensed under the GNU General Public License v2.
# See /LICENSE for more information.
#
include $(TOPDIR)/rules.mk
include $(INCLUDE_DIR)/image.mk

define Build/Clean
	$(MAKE) -C lzma-loader clean
endef

define Image/Prepare
	# Optimized LZMA compression (with dictionary), handled by lzma-loader.
	cat $(KDIR)/vmlinux | $(STAGING_DIR_HOST)/bin/lzma e -si -so -eos -lc1 -lp2 -pb2 > $(KDIR)/vmlinux.lzma

	# Less optimal LZMA compression (no dictionary), handled by CFE.
	$(STAGING_DIR_HOST)/bin/lzma e -so -d16 $(KDIR)/vmlinux > $(KDIR)/vmlinux-nodictionary.lzma

	gzip -nc9 $(KDIR)/vmlinux > $(KDIR)/vmlinux.gz
ifneq ($(CONFIG_TARGET_ROOTFS_INITRAMFS),)
	cat $(KDIR)/vmlinux-initramfs | $(STAGING_DIR_HOST)/bin/lzma e -si -so -eos -lc1 -lp2 -pb2 > $(KDIR)/vmlinux-initramfs.lzma
	$(STAGING_DIR_HOST)/bin/lzma e -so -d16 $(KDIR)/vmlinux-initramfs > $(KDIR)/vmlinux-initramfs-nodictionary.lzma
endif
	rm -f $(KDIR)/loader.gz
	$(MAKE) -C lzma-loader \
		BUILD_DIR="$(KDIR)" \
		TARGET="$(KDIR)" \
		clean install
	echo -ne "\\x00" >> $(KDIR)/loader.gz
	rm -f $(KDIR)/fs_mark
	echo -ne '\xde\xad\xc0\xde' > $(KDIR)/fs_mark
	$(call prepare_generic_squashfs,$(KDIR)/fs_mark)
endef

define Image/Build/wgt634u
	dd if=$(KDIR)/loader.elf of=$(BIN_DIR)/openwrt-wgt634u-$(2).bin bs=131072 conv=sync
	cat $(BIN_DIR)/$(IMG_PREFIX)-$(1).trx >> $(BIN_DIR)/openwrt-wgt634u-$(2).bin
endef

define Image/Build/dwl3150
	cp $(BIN_DIR)/$(IMG_PREFIX)-$(1).trx $(BIN_DIR)/openwrt-dwl3150-$(2).bin
	echo "BCM-5352-2050-0000000-01" >> $(BIN_DIR)/openwrt-dwl3150-$(2).bin
endef

# $(1): filesystem type.
# $(2): device model (used for output file).
# $(3): pattern (device specific magic).
# $(4): version.
# $(5): simplified filesystem type (without block size).
define Image/Build/CyberTAN
	$(STAGING_DIR_HOST)/bin/addpattern -4 -p $(3) -v v$(4) -i $(BIN_DIR)/$(IMG_PREFIX)-$(1).trx -o $(BIN_DIR)/openwrt-$(2)-$(5).bin $(if $(6),-s $(6))
endef
define Image/Build/CyberTAN2
	$(STAGING_DIR_HOST)/bin/addpattern -4 -p $(3) -v v$(4) -i $(BIN_DIR)/openwrt-$(2)-$(5).noheader.bin -o $(BIN_DIR)/openwrt-$(2)-$(5).bin $(if $(6),-s $(6))
endef
define Image/Build/CyberTANHead
	$(STAGING_DIR_HOST)/bin/addpattern -5 -p $(3) -v v$(4) -i /dev/null -o $(KDIR)/openwrt-$(2)-header.bin $(if $(6),-s $(6))
endef

define Image/Build/Motorola
	$(STAGING_DIR_HOST)/bin/motorola-bin -$(3) $(BIN_DIR)/$(IMG_PREFIX)-$(1).trx $(BIN_DIR)/openwrt-$(2)-$(4).bin
endef

define Image/Build/USR
	$(STAGING_DIR_HOST)/bin/trx2usr $(BIN_DIR)/$(IMG_PREFIX)-$(1).trx $(BIN_DIR)/openwrt-$(2)-$(3).bin
endef

define Image/Build/Edi
	$(STAGING_DIR_HOST)/bin/trx2edips $(BIN_DIR)/$(IMG_PREFIX)-$(1).trx $(BIN_DIR)/openwrt-$(2)-$(3).bin
endef

define Image/Build/Huawei
	dd if=/dev/zero of=$(BIN_DIR)/openwrt-$(2)-$(3)-gz.bin bs=92 count=1
	echo -ne 'HDR0\x08\x00\x00\x00' >> $(BIN_DIR)/openwrt-$(2)-$(3)-gz.bin
	cat $(BIN_DIR)/$(IMG_PREFIX)-$(1)-gz.trx >> $(BIN_DIR)/openwrt-$(2)-$(3)-gz.bin
endef

# $(1): filesystem type.
# $(2): device model (used for output file).
# $(3): board_id (device specific magic).
# $(4): region.
# $(5): simplified filesystem type (without block size).
define Image/Build/Chk
	$(STAGING_DIR_HOST)/bin/mkchkimg -o $(BIN_DIR)/openwrt-$(2)-$(5).chk -k $(BIN_DIR)/$(IMG_PREFIX)-$(1).trx -b $(3) -r $(4)
endef

define trxalign/jffs2-128k
-a 0x20000 -f $(KDIR)/root.$(1)
endef
define trxalign/jffs2-64k
-a 0x10000 -f $(KDIR)/root.$(1)
endef
define trxalign/squashfs
-a 1024 -f $(KDIR)/root.$(1) $(if $(2),-f $(2)) -a 0x10000 -A $(KDIR)/fs_mark
endef

define Image/Build/trxV2
	$(call Image/Build/CyberTANHead,$(1),$(2),$(3),$(4),$(5),$(if $(6),$(6)))
	$(STAGING_DIR_HOST)/bin/trx -2 -o $(BIN_DIR)/openwrt-$(2)-$(5).noheader.bin \
		-f $(KDIR)/loader.gz -f $(KDIR)/vmlinux.lzma \
		$(call trxalign/$(1),$(1),$(KDIR)/openwrt-$(2)-header.bin)
	$(call Image/Build/CyberTAN2,$(1),$(2),$(3),$(4),$(5),$(if $(6),$(6)))
endef

#################################################
# Images
#################################################

define Build/trx-with-loader
	$(STAGING_DIR_HOST)/bin/trx \
		-o $@ \
		-f $(KDIR)/loader.gz \
		-f $(word 1,$^) \
		$(call trxalign/$(FILESYSTEM),$(FILESYSTEM))
endef

define Build/asus-trx
	$(STAGING_DIR_HOST)/bin/asustrx -p $(PRODUCTID) -i $@ -o $@.new
	mv $@.new $@
endef

define Build/linksys-bin
	$(STAGING_DIR_HOST)/bin/addpattern -4 -p $(DEVICE_ID) -v v$(VERSION) -i $@ -o $@.new
	mv $@.new $@
endef

define Build/netgear-chk
	$(STAGING_DIR_HOST)/bin/mkchkimg \
		-o $@.new \
		-k $@ \
		-b $(BOARD_ID) \
		-r $(REGION)
	mv $@.new $@
endef

#################################################
# Devices
#################################################

DEVICE_VARS += PRODUCTID
DEVICE_VARS += DEVICE_ID VERSION
DEVICE_VARS += BOARD_ID REGION

define Device/Default
	KERNEL := kernel-bin
	IMAGE_NAME = $$(IMAGE_PREFIX)-$$(1).$$(2)
	KERNEL_NAME = vmlinux.lzma
	FILESYSTEMS := $(FS_64K)
	IMAGES := trx
	IMAGE/trx := trx-with-loader
endef

define Device/asus
	IMAGES := trx
	IMAGE/trx := trx-with-loader | asus-trx
endef

define AsusDevice
  define Device/asus-$(1)
	$$(Device/asus)
	PRODUCTID := $(2)
  endef
  TARGET_DEVICES += asus-$(1)
endef

define Device/linksys
	IMAGES := bin
	IMAGE/bin := trx-with-loader | linksys-bin
endef

define LinksysDevice
  define Device/linksys-$(1)
	$$(Device/linksys)
	DEVICE_ID := $(2)
	VERSION := $(3)
  endef
  TARGET_DEVICES += linksys-$(1)
endef

define Device/netgear
	IMAGES := chk
	IMAGE/chk := trx-with-loader | netgear-chk
endef

define NetgearDevice
  define Device/netgear-$(1)
	$$(Device/netgear)
	BOARD_ID := $(2)
	REGION := $(3)
  endef
  TARGET_DEVICES += netgear-$(1)
endef

#################################################
# Subtarget generic
#################################################

ifeq ($(SUBTARGET),generic)
  # BCM4705 with tg3
  $(eval $(call LinksysDevice,wrt300n-v1.1,EWC2,1.51.2))
  $(eval $(call LinksysDevice,wrt310n-v1,310N,1.0.10))
  $(eval $(call LinksysDevice,wrt350n-v1,EWCG,1.04.1))
  $(eval $(call LinksysDevice,wrt610n-v1,610N,1.0.1))

  # BCMA SoC with SSB WiFi
  $(eval $(call LinksysDevice,wrt610n-v2,610N,2.0.0))
  $(eval $(call LinksysDevice,e3000-v1,61XN,1.0.3))
endif

#################################################
# Subtarget legacy
#################################################

# $(1): filesystem type.
define Image/Build/legacy/devices-with-128k-blocks
	$(call Image/Build/trxV2,$(1),wrt54g3gv2-vf,3G2V,3.00.24,$(patsubst jffs2-%,jffs2,$(1)),6)
	$(call Image/Build/wgt634u,$(1),$(patsubst jffs2-%,jffs2,$(1)))
endef

# $(1): filesystem type.
define Image/Build/legacy/devices-with-64k-blocks
	$(call Image/Build/dwl3150,$(1),$(patsubst jffs2-%,jffs2,$(1)))
	$(call Image/Build/Edi,$(1),ps1208mfg,$(patsubst jffs2-%,jffs2,$(1)))
	$(call Image/Build/Huawei,$(1),e970,$(1))
	$(call Image/Build/Motorola,$(1),wa840g,2,$(patsubst jffs2-%,jffs2,$(1)))
	$(call Image/Build/Motorola,$(1),we800g,3,$(patsubst jffs2-%,jffs2,$(1)))
	$(call Image/Build/Motorola,$(1),wr850g,1,$(1))
	$(call Image/Build/USR,$(1),usr5461,$(1))
endef

# $(1): filesystem type.
define Image/Build/legacy/jffs2-64k
	$(call Image/Build/legacy/devices-with-64k-blocks,$(1))
endef

# $(1): filesystem type.
define Image/Build/legacy/jffs2-128k
	$(call Image/Build/legacy/devices-with-128k-blocks,$(1))
endef

# $(1): filesystem type.
define Image/Build/legacy/squashfs
	$(call Image/Build/legacy/devices-with-64k-blocks,$(1))
	$(call Image/Build/legacy/devices-with-128k-blocks,$(1))
endef

define Device/linksys-wrt54gs
	$(Device/linksys)
	FILESYSTEMS := $(FS_128K)
	DEVICE_ID := W54S
	VERSION := 4.80.1
endef

define Device/linksys-wrtsl54gs
	$(Device/linksys)
	FILESYSTEMS := $(FS_128K)
	DEVICE_ID := W54U
	VERSION := 2.08.1
endef

ifeq ($(SUBTARGET),legacy)
  TARGET_DEVICES += \
	linksys-wrt54gs \
	linksys-wrtsl54gs

  $(eval $(call LinksysDevice,wrt54g3g,W54F,2.20.1))
  $(eval $(call LinksysDevice,wrt54g3g-em,W3GN,2.20.1))
  $(eval $(call LinksysDevice,wrt54g,W54G,4.71.1))
  $(eval $(call LinksysDevice,wrt54gs-v4,W54s,1.09.1))
  $(eval $(call LinksysDevice,wrt150n,N150,1.51.3))
  $(eval $(call LinksysDevice,wrt160n-v1,N150,1.50.1))
  $(eval $(call LinksysDevice,wrt300n-v1,EWCB,1.03.6))
  $(eval $(call NetgearDevice,wgr614-v8,U12H072T00_NETGEAR,2))
  $(eval $(call NetgearDevice,wndr3300-v1,U12H093T00_NETGEAR,2))
  $(eval $(call NetgearDevice,wnr834b-v2,U12H081T00_NETGEAR,2))
endif

#################################################
# Subtarget mips74k
#################################################

ifeq ($(SUBTARGET),mips74k)
  $(eval $(call AsusDevice,rt-n66u,RT-N66U))
  $(eval $(call LinksysDevice,wrt160n-v3,N150,3.0.3))
  $(eval $(call LinksysDevice,wrt310n-v2,310N,2.0.1))
  $(eval $(call LinksysDevice,wrt320n-v1,320N,1.0.5))
  $(eval $(call LinksysDevice,e900-v1,E900,1.0.4))
  $(eval $(call LinksysDevice,e1000-v1-v2-v2.1,E100,1.1.3))
  $(eval $(call LinksysDevice,e1200-v1,E120,1.0.3))
  $(eval $(call LinksysDevice,e1200-v2-new,E122,1.0.4))
  $(eval $(call LinksysDevice,e1500-v1,E150,1.0.5))
  $(eval $(call LinksysDevice,e1550-v1,1550,1.0.3))
  $(eval $(call LinksysDevice,e2000-v1,32XN,1.0.4))
  $(eval $(call LinksysDevice,e2500-v1,E25X,1.0.7))
  $(eval $(call LinksysDevice,e2500-v2,E25X,2.0.0))
  $(eval $(call LinksysDevice,e2500-v2.1,25RU,2.1.0))
  $(eval $(call LinksysDevice,e2500-v3,25V3,3.0.0))
  $(eval $(call LinksysDevice,e3200-v1,3200,1.0.1))
  $(eval $(call LinksysDevice,e4200-v1,4200,1.0.5))
  $(eval $(call NetgearDevice,wgr614-v10_north-america,U12H139T01_NETGEAR,2))
  $(eval $(call NetgearDevice,wgr614-v10_other-regions,U12H139T01_NETGEAR,1))
  $(eval $(call NetgearDevice,wndr3400-v1,U12H155T00_NETGEAR,2))
  $(eval $(call NetgearDevice,wndr3400-v2,U12H187T00_NETGEAR,2))
  $(eval $(call NetgearDevice,wndr3400-v3,U12H208T00_NETGEAR,1))
  $(eval $(call NetgearDevice,wndr3700-v3,U12H194T00_NETGEAR,2))
  $(eval $(call NetgearDevice,wndr4000,U12H181T00_NETGEAR,2))
  $(eval $(call NetgearDevice,wnr1000-v3,U12H139T00_NETGEAR,2))
  $(eval $(call NetgearDevice,wnr2000v2,U12H114T00_NETGEAR,2))
  $(eval $(call NetgearDevice,wnr3000rp,U12H163T01_NETGEAR,1))
  $(eval $(call NetgearDevice,wnr3500l-v1-north-america,U12H136T99_NETGEAR,2))
  $(eval $(call NetgearDevice,wnr3500l-v1-other-regions,U12H136T99_NETGEAR,1))
  $(eval $(call NetgearDevice,wnr3500l-v2,U12H172T00_NETGEAR,1))
  $(eval $(call NetgearDevice,wnr3500-v2,U12H127T00_NETGEAR,2))
endif

#################################################
# Shared BuildImage defines
#################################################

define Image/Build/Initramfs
	$(STAGING_DIR_HOST)/bin/trx -o $(BIN_DIR)/$(IMG_PREFIX)-initramfs.trx -f $(KDIR)/loader.gz -f $(KDIR)/vmlinux-initramfs.lzma
	$(STAGING_DIR_HOST)/bin/trx -o $(BIN_DIR)/$(IMG_PREFIX)-initramfs-noloader-nodictionary.trx -f $(KDIR)/vmlinux-initramfs-nodictionary.lzma
endef

# $(1): filesystem type.
define Image/Build
	$(STAGING_DIR_HOST)/bin/trx -o $(BIN_DIR)/$(IMG_PREFIX)-$(1).trx \
		-f $(KDIR)/loader.gz -f $(KDIR)/vmlinux.lzma \
		$(call trxalign/$(1),$(1))
	$(STAGING_DIR_HOST)/bin/trx -o $(BIN_DIR)/$(IMG_PREFIX)-$(1)-noloader-nodictionary.trx \
		-f $(KDIR)/vmlinux-nodictionary.lzma \
		$(call trxalign/$(1),$(1))
	$(STAGING_DIR_HOST)/bin/trx -o $(BIN_DIR)/$(IMG_PREFIX)-$(1)-gz.trx \
		-f $(KDIR)/vmlinux.gz \
		$(call trxalign/$(1),$(1))
	$(call Image/Build/$(SUBTARGET)/$(1),$(1))
#	$(call Image/Build/Chk,$(1),wgr614_v9,U12H094T00_NETGEAR,2,$(patsubst jffs2-%,jffs2,$(1)))
#	$(call Image/Build/Chk,$(1),wndr3400_vcna,U12H155T01_NETGEAR,2,$(patsubst jffs2-%,jffs2,$(1)))
#	$(call Image/Build/Chk,$(1),wnr3500U,U12H136T00_NETGEAR,2,$(patsubst jffs2-%,jffs2,$(1)))
#	$(call Image/Build/Chk,$(1),wnr3500v2_VC,U12H127T70_NETGEAR,2,$(patsubst jffs2-%,jffs2,$(1)))
ifneq ($(CONFIG_TARGET_ROOTFS_INITRAMFS),)
	$(call Image/Build/Initramfs)
endif
endef

$(eval $(call BuildImage))