openwrt-owl/target/linux/ipq806x/patches/0021-ARM-dts-qcom-Add-nodes-necessary-for-SMP-boot.patch

From 5a054211d9380cef5a09da7c5e815c827f330a96 Mon Sep 17 00:00:00 2001
From: Rohit Vaswani <rvaswani@codeaurora.org>
Date: Fri, 1 Nov 2013 10:10:40 -0700
Subject: [PATCH 021/182] ARM: dts: qcom: Add nodes necessary for SMP boot

Add the necessary nodes to support SMP on MSM8660, MSM8960, and
MSM8974/APQ8074. While we're here also add in the error
interrupts for the Krait cache error detection.

Signed-off-by: Rohit Vaswani <rvaswani@codeaurora.org>
[sboyd: Split into separate patch, add error interrupts]
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Kumar Gala <galak@codeaurora.org>
---
 arch/arm/boot/dts/qcom-msm8660.dtsi |   24 ++++++++++++
 arch/arm/boot/dts/qcom-msm8960.dtsi |   52 ++++++++++++++++++++++++++
 arch/arm/boot/dts/qcom-msm8974.dtsi |   69 +++++++++++++++++++++++++++++++++++
 3 files changed, 145 insertions(+)

--- a/arch/arm/boot/dts/qcom-msm8660.dtsi
+++ b/arch/arm/boot/dts/qcom-msm8660.dtsi
@@ -9,6 +9,30 @@
 	compatible = "qcom,msm8660";
 	interrupt-parent = <&intc>;
 
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "qcom,scorpion";
+		enable-method = "qcom,gcc-msm8660";
+
+		cpu@0 {
+			device_type = "cpu";
+			reg = <0>;
+			next-level-cache = <&L2>;
+		};
+
+		cpu@1 {
+			device_type = "cpu";
+			reg = <1>;
+			next-level-cache = <&L2>;
+		};
+
+		L2: l2-cache {
+			compatible = "cache";
+			cache-level = <2>;
+		};
+	};
+
 	intc: interrupt-controller@2080000 {
 		compatible = "qcom,msm-8660-qgic";
 		interrupt-controller;
--- a/arch/arm/boot/dts/qcom-msm8960.dtsi
+++ b/arch/arm/boot/dts/qcom-msm8960.dtsi
@@ -9,6 +9,36 @@
 	compatible = "qcom,msm8960";
 	interrupt-parent = <&intc>;
 
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		interrupts = <1 14 0x304>;
+		compatible = "qcom,krait";
+		enable-method = "qcom,kpss-acc-v1";
+
+		cpu@0 {
+			device_type = "cpu";
+			reg = <0>;
+			next-level-cache = <&L2>;
+			qcom,acc = <&acc0>;
+			qcom,saw = <&saw0>;
+		};
+
+		cpu@1 {
+			device_type = "cpu";
+			reg = <1>;
+			next-level-cache = <&L2>;
+			qcom,acc = <&acc1>;
+			qcom,saw = <&saw1>;
+		};
+
+		L2: l2-cache {
+			compatible = "cache";
+			cache-level = <2>;
+			interrupts = <0 2 0x4>;
+		};
+	};
+
 	intc: interrupt-controller@2000000 {
 		compatible = "qcom,msm-qgic2";
 		interrupt-controller;
@@ -53,6 +83,28 @@
 		#reset-cells = <1>;
 	};
 
+	acc0: clock-controller@2088000 {
+		compatible = "qcom,kpss-acc-v1";
+		reg = <0x02088000 0x1000>, <0x02008000 0x1000>;
+	};
+
+	acc1: clock-controller@2098000 {
+		compatible = "qcom,kpss-acc-v1";
+		reg = <0x02098000 0x1000>, <0x02008000 0x1000>;
+	};
+
+	saw0: regulator@2089000 {
+		compatible = "qcom,saw2";
+		reg = <0x02089000 0x1000>, <0x02009000 0x1000>;
+		regulator;
+	};
+
+	saw1: regulator@2099000 {
+		compatible = "qcom,saw2";
+		reg = <0x02099000 0x1000>, <0x02009000 0x1000>;
+		regulator;
+	};
+
 	serial@16440000 {
 		compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
 		reg = <0x16440000 0x1000>,
--- a/arch/arm/boot/dts/qcom-msm8974.dtsi
+++ b/arch/arm/boot/dts/qcom-msm8974.dtsi
@@ -9,6 +9,49 @@
 	compatible = "qcom,msm8974";
 	interrupt-parent = <&intc>;
 
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		interrupts = <1 9 0xf04>;
+		compatible = "qcom,krait";
+		enable-method = "qcom,kpss-acc-v2";
+
+		cpu@0 {
+			device_type = "cpu";
+			reg = <0>;
+			next-level-cache = <&L2>;
+			qcom,acc = <&acc0>;
+		};
+
+		cpu@1 {
+			device_type = "cpu";
+			reg = <1>;
+			next-level-cache = <&L2>;
+			qcom,acc = <&acc1>;
+		};
+
+		cpu@2 {
+			device_type = "cpu";
+			reg = <2>;
+			next-level-cache = <&L2>;
+			qcom,acc = <&acc2>;
+		};
+
+		cpu@3 {
+			device_type = "cpu";
+			reg = <3>;
+			next-level-cache = <&L2>;
+			qcom,acc = <&acc3>;
+		};
+
+		L2: l2-cache {
+			compatible = "cache";
+			cache-level = <2>;
+			interrupts = <0 2 0x4>;
+			qcom,saw = <&saw_l2>;
+		};
+	};
+
 	soc: soc {
 		#address-cells = <1>;
 		#size-cells = <1>;
@@ -91,6 +134,32 @@
 			};
 		};
 
+		saw_l2: regulator@f9012000 {
+			compatible = "qcom,saw2";
+			reg = <0xf9012000 0x1000>;
+			regulator;
+		};
+
+		acc0: clock-controller@f9088000 {
+			compatible = "qcom,kpss-acc-v2";
+			reg = <0xf9088000 0x1000>, <0xf9008000 0x1000>;
+		};
+
+		acc1: clock-controller@f9098000 {
+			compatible = "qcom,kpss-acc-v2";
+			reg = <0xf9098000 0x1000>, <0xf9008000 0x1000>;
+		};
+
+		acc2: clock-controller@f90a8000 {
+			compatible = "qcom,kpss-acc-v2";
+			reg = <0xf90a8000 0x1000>, <0xf9008000 0x1000>;
+		};
+
+		acc3: clock-controller@f90b8000 {
+			compatible = "qcom,kpss-acc-v2";
+			reg = <0xf90b8000 0x1000>, <0xf9008000 0x1000>;
+		};
+
 		restart@fc4ab000 {
 			compatible = "qcom,pshold";
 			reg = <0xfc4ab000 0x4>;