openwrt-owl/package/kernel/mac80211/patches/060-no_local_ssb_bcma.patch

--- a/.local-symbols
+++ b/.local-symbols
@@ -382,42 +382,6 @@ USB_CDC_PHONET=
 USB_IPHETH=
 USB_SIERRA_NET=
 USB_VL600=
-SSB_POSSIBLE=
-SSB=
-SSB_SPROM=
-SSB_BLOCKIO=
-SSB_PCIHOST_POSSIBLE=
-SSB_PCIHOST=
-SSB_B43_PCI_BRIDGE=
-SSB_PCMCIAHOST_POSSIBLE=
-SSB_PCMCIAHOST=
-SSB_SDIOHOST_POSSIBLE=
-SSB_SDIOHOST=
-SSB_SILENT=
-SSB_DEBUG=
-SSB_SERIAL=
-SSB_DRIVER_PCICORE_POSSIBLE=
-SSB_DRIVER_PCICORE=
-SSB_PCICORE_HOSTMODE=
-SSB_DRIVER_MIPS=
-SSB_SFLASH=
-SSB_EMBEDDED=
-SSB_DRIVER_EXTIF=
-SSB_DRIVER_GIGE=
-SSB_DRIVER_GPIO=
-BCMA_POSSIBLE=
-BCMA=
-BCMA_BLOCKIO=
-BCMA_HOST_PCI_POSSIBLE=
-BCMA_HOST_PCI=
-BCMA_DRIVER_PCI_HOSTMODE=
-BCMA_HOST_SOC=
-BCMA_DRIVER_MIPS=
-BCMA_SFLASH=
-BCMA_NFLASH=
-BCMA_DRIVER_GMAC_CMN=
-BCMA_DRIVER_GPIO=
-BCMA_DEBUG=
 DRM=
 DRM_USB=
 DRM_KMS_HELPER=
--- a/Kconfig
+++ b/Kconfig
@@ -33,9 +33,6 @@ source drivers/net/wireless/Kconfig
 source drivers/net/ethernet/Kconfig
 source drivers/net/usb/Kconfig
 
-source drivers/ssb/Kconfig
-source drivers/bcma/Kconfig
-
 source drivers/gpu/drm/Kconfig
 
 source net/nfc/Kconfig
--- a/Makefile.kernel
+++ b/Makefile.kernel
@@ -26,8 +26,6 @@ obj-$(CPTCFG_MAC80211) += net/mac80211/
 obj-$(CPTCFG_WLAN) += drivers/net/wireless/
 obj-$(CPTCFG_BT) += net/bluetooth/
 obj-$(CPTCFG_BT) += drivers/bluetooth/
-obj-$(CPTCFG_SSB) += drivers/ssb/
-obj-$(CPTCFG_BCMA) += drivers/bcma/
 obj-$(CPTCFG_ETHERNET) += drivers/net/ethernet/
 obj-$(CPTCFG_USB_NET_RNDIS_WLAN) += drivers/net/usb/
 obj-$(CPTCFG_DRM) += drivers/gpu/drm/
--- a/drivers/net/wireless/b43/main.c
+++ b/drivers/net/wireless/b43/main.c
@@ -2729,7 +2729,7 @@ static struct ssb_device *b43_ssb_gpio_d
 {
 	struct ssb_bus *bus = dev->dev->sdev->bus;
 
-#ifdef CPTCFG_SSB_DRIVER_PCICORE
+#ifdef CONFIG_SSB_DRIVER_PCICORE
 	return (bus->chipco.dev ? bus->chipco.dev : bus->pcicore.dev);
 #else
 	return bus->chipco.dev;
@@ -4736,7 +4736,7 @@ static int b43_wireless_core_init(struct
 	}
 	if (sprom->boardflags_lo & B43_BFL_XTAL_NOSLOW)
 		hf |= B43_HF_DSCRQ; /* Disable slowclock requests from ucode. */
-#ifdef CPTCFG_SSB_DRIVER_PCICORE
+#ifdef CONFIG_SSB_DRIVER_PCICORE
 	if (dev->dev->bus_type == B43_BUS_SSB &&
 	    dev->dev->sdev->bus->bustype == SSB_BUSTYPE_PCI &&
 	    dev->dev->sdev->bus->pcicore.dev->id.revision <= 10)
--- a/drivers/net/wireless/b43legacy/main.c
+++ b/drivers/net/wireless/b43legacy/main.c
@@ -1937,7 +1937,7 @@ static int b43legacy_gpio_init(struct b4
 	if (dev->dev->id.revision >= 2)
 		mask  |= 0x0010; /* FIXME: This is redundant. */
 
-#ifdef CPTCFG_SSB_DRIVER_PCICORE
+#ifdef CONFIG_SSB_DRIVER_PCICORE
 	pcidev = bus->pcicore.dev;
 #endif
 	gpiodev = bus->chipco.dev ? : pcidev;
@@ -1956,7 +1956,7 @@ static void b43legacy_gpio_cleanup(struc
 	struct ssb_bus *bus = dev->dev->bus;
 	struct ssb_device *gpiodev, *pcidev = NULL;
 
-#ifdef CPTCFG_SSB_DRIVER_PCICORE
+#ifdef CONFIG_SSB_DRIVER_PCICORE
 	pcidev = bus->pcicore.dev;
 #endif
 	gpiodev = bus->chipco.dev ? : pcidev;
--- a/drivers/net/wireless/brcm80211/brcmsmac/Makefile
+++ b/drivers/net/wireless/brcm80211/brcmsmac/Makefile
@@ -43,6 +43,6 @@ brcmsmac-y := \
 	brcms_trace_events.o \
 	debug.o
 
-brcmsmac-$(CPTCFG_BCMA_DRIVER_GPIO) += led.o
+brcmsmac-$(CONFIG_BCMA_DRIVER_GPIO) += led.o
 
 obj-$(CPTCFG_BRCMSMAC)	+= brcmsmac.o
--- a/drivers/net/wireless/brcm80211/brcmsmac/led.h
+++ b/drivers/net/wireless/brcm80211/brcmsmac/led.h
@@ -22,7 +22,7 @@ struct brcms_led {
 	bool active_low;
 };
 
-#ifdef CPTCFG_BCMA_DRIVER_GPIO
+#ifdef CONFIG_BCMA_DRIVER_GPIO
 void brcms_led_unregister(struct brcms_info *wl);
 int brcms_led_register(struct brcms_info *wl);
 #else