openwrt-owl/target/linux/ramips/dts/ZBT-WG2626.dts

128 lines
2.0 KiB
Plaintext
Raw Normal View History

/dts-v1/;
#include "mt7621.dtsi"
/ {
compatible = "mediatek,mt7621-eval-board", "mediatek,mt7621-soc";
model = "ZBT-WG2626";
memory@0 {
device_type = "memory";
reg = <0x0 0x1c000000>, <0x20000000 0x4000000>;
};
chosen {
bootargs = "console=ttyS0,115200";
};
sdhci@10130000 {
status = "okay";
};
palmbus@1E000000 {
spi@b00 {
status = "okay";
m25p80@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "jedec,spi-nor";
reg = <0 0>;
linux,modalias = "m25p80";
spi-max-frequency = <10000000>;
partition@0 {
label = "u-boot";
reg = <0x0 0x30000>;
read-only;
};
partition@30000 {
label = "u-boot-env";
reg = <0x30000 0x10000>;
read-only;
};
factory: partition@40000 {
label = "factory";
reg = <0x40000 0x10000>;
read-only;
};
partition@50000 {
label = "firmware";
reg = <0x50000 0xfb0000>;
};
};
};
i2c@900 {
compatible = "ralink,i2c-mt7621";
reg = <0x900 0x100>;
#address-cells = <1>;
#size-cells = <0>;
pinctrl-names = "default";
pinctrl-0 = <&i2c_pins>;
status = "okay";
};
};
pcie@1e140000 {
status = "okay";
pcie0 {
mt76@0,0 {
reg = <0x0000 0 0 0 0>;
device_type = "pci";
mediatek,mtd-eeprom = <&factory 0x8000>;
mediatek,2ghz = <0>;
};
};
pcie1 {
mt76@1,0 {
reg = <0x0000 0 0 0 0>;
device_type = "pci";
mediatek,mtd-eeprom = <&factory 0x0000>;
mediatek,5ghz = <0>;
};
};
};
ethernet@1e100000 {
mtd-mac-address = <&factory 0xe000>;
};
gpio-keys-polled {
compatible = "gpio-keys-polled";
#address-cells = <1>;
#size-cells = <0>;
poll-interval = <20>;
reset {
label = "reset";
gpios = <&gpio0 18 1>;
linux,code = <0x198>;
};
};
gpio-leds {
compatible = "gpio-leds";
status {
label = "zbt-wg2626:green:status";
gpios = <&gpio0 24 1>;
};
};
pinctrl {
state_default: pinctrl0 {
gpio {
ralink,group = "wdt", "rgmii2", "wdt rst", "jtag", "mdio";
ralink,function = "gpio";
};
};
};
};