openwrt-owl/target/linux/ramips/dts/RT-N56U.dts

152 lines
2.3 KiB
Plaintext
Raw Normal View History

/dts-v1/;
/include/ "rt3883.dtsi"
/ {
compatible = "RT-N56U", "ralink,rt3883-soc";
model = "Asus RT-N56U";
palmbus@10000000 {
gpio1: gpio@638 {
status = "okay";
};
};
pinctrl {
state_default: pinctrl0 {
gpio {
ralink,group = "spi", "i2c", "jtag", "uartf";
ralink,function = "gpio";
};
};
};
ethernet@10100000 {
mtd-mac-address = <&factory 0x4>;
port@0 {
ralink,fixed-link = <1000 1 1 1>;
};
};
pci@10140000 {
status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&pci_pins>;
pci_pins: pci {
pci {
ralink,group = "pci";
ralink,function = "pci-fnc";
};
};
host-bridge {
pci-bridge@1 {
status = "okay";
wmac@0,0 {
compatible = "ralink,rt2880-pci", "pciclass060400", "pciclass0604";
reg = < 0x10000 0 0 0 0 >;
ralink,eeprom = "rt2x00pci_1_0.eeprom";
};
};
};
};
wmac@10180000 {
status = "okay";
ralink,2ghz = <0>;
ralink,mtd-eeprom = <&factory 0>;
};
ehci@101c0000 {
status = "okay";
};
ohci@101c1000 {
status = "okay";
};
nor-flash@1c000000 {
compatible = "cfi-flash";
reg = <0x1c000000 0x800000>;
bank-width = <2>;
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
reg = <0x0 0x0030000>;
label = "u-boot";
read-only;
};
partition@30000 {
reg = <0x00030000 0x00010000>;
label = "u-boot-env";
read-only;
};
factory: partition@40000 {
reg = <0x00040000 0x00010000>;
label = "factory";
read-only;
};
partition@50000 {
reg = <0x00050000 0x007b0000>;
label = "firmware";
};
};
rtl8367 {
compatible = "realtek,rtl8367";
gpio-sda = <&gpio0 1 0>;
gpio-sck = <&gpio0 2 0>;
realtek,extif1 = <1 0 1 1 1 1 1 1 2>;
};
gpio-keys-polled {
compatible = "gpio-keys-polled";
#address-cells = <1>;
#size-cells = <0>;
poll-interval = <100>;
reset {
label = "reset";
gpios = <&gpio0 13 1>;
linux,code = <0x198>;
};
wps {
label = "wps";
gpios = <&gpio1 2 1>;
linux,code = <0x211>;
};
};
gpio-leds {
compatible = "gpio-leds";
power {
label = "asus:blue:power";
gpios = <&gpio0 0 1>;
};
lan {
label = "asus:blue:lan";
gpios = <&gpio0 19 1>;
};
wan {
label = "asus:blue:wan";
gpios = <&gpio1 3 1>;
};
usb {
label = "asus:blue:usb";
gpios = <&gpio1 0 1>;
};
};
};