openwrt-owl/package/network/utils/comgt/files/ncm.sh

193 lines
4.8 KiB
Bash
Raw Normal View History

#!/bin/sh
[ -n "$INCLUDE_ONLY" ] || {
. /lib/functions.sh
. ../netifd-proto.sh
init_proto "$@"
}
proto_ncm_init_config() {
no_device=1
available=1
proto_config_add_string "device:device"
proto_config_add_string apn
proto_config_add_string auth
proto_config_add_string username
proto_config_add_string password
proto_config_add_string pincode
proto_config_add_string delay
proto_config_add_string mode
proto_config_add_string pdptype
proto_config_add_int profile
proto_config_add_defaults
}
proto_ncm_setup() {
local interface="$1"
local manufacturer initialize setmode connect ifname devname devpath
local device apn auth username password pincode delay mode pdptype profile $PROTO_DEFAULT_OPTIONS
json_get_vars device apn auth username password pincode delay mode pdptype profile $PROTO_DEFAULT_OPTIONS
[ "$metric" = "" ] && metric="0"
[ -n "$profile" ] || profile=1
pdptype=`echo "$pdptype" | awk '{print toupper($0)}'`
[ "$pdptype" = "IP" -o "$pdptype" = "IPV6" -o "$pdptype" = "IPV4V6" ] || pdptype="IP"
[ -n "$ctl_device" ] && device=$ctl_device
[ -n "$device" ] || {
echo "No control device specified"
proto_notify_error "$interface" NO_DEVICE
proto_set_available "$interface" 0
return 1
}
device="$(readlink -f $device)"
[ -e "$device" ] || {
echo "Control device not valid"
proto_set_available "$interface" 0
return 1
}
devname="$(basename "$device")"
case "$devname" in
'tty'*)
devpath="$(readlink -f /sys/class/tty/$devname/device)"
ifname="$( ls "$devpath"/../../*/net )"
;;
*)
devpath="$(readlink -f /sys/class/usbmisc/$devname/device/)"
ifname="$( ls "$devpath"/net )"
;;
esac
[ -n "$ifname" ] || {
echo "The interface could not be found."
proto_notify_error "$interface" NO_IFACE
proto_set_available "$interface" 0
return 1
}
[ -n "$delay" ] && sleep "$delay"
manufacturer=`gcom -d "$device" -s /etc/gcom/getcardinfo.gcom | awk 'NF && $0 !~ /AT\+CGMI/ { sub(/\+CGMI: /,""); print tolower($1); exit; }'`
[ $? -ne 0 ] && {
echo "Failed to get modem information"
proto_notify_error "$interface" GETINFO_FAILED
return 1
}
json_load "$(cat /etc/gcom/ncm.json)"
json_select "$manufacturer"
[ $? -ne 0 ] && {
echo "Unsupported modem"
proto_notify_error "$interface" UNSUPPORTED_MODEM
proto_set_available "$interface" 0
return 1
}
json_get_values initialize initialize
for i in $initialize; do
eval COMMAND="$i" gcom -d "$device" -s /etc/gcom/runcommand.gcom || {
echo "Failed to initialize modem"
proto_notify_error "$interface" INITIALIZE_FAILED
return 1
}
done
[ -n "$pincode" ] && {
PINCODE="$pincode" gcom -d "$device" -s /etc/gcom/setpin.gcom || {
echo "Unable to verify PIN"
proto_notify_error "$interface" PIN_FAILED
proto_block_restart "$interface"
return 1
}
}
[ -n "$mode" ] && {
json_select modes
json_get_var setmode "$mode"
gcom: Fix 'mode' option for ncm For Huawei devices like E3372 proper command for set lte mode is: AT^SYSCFGEX="03",3fffffff,2,4,7fffffffffffffff,, Eval is required for proper quotation. Without this fix: Fri Nov 4 19:07:49 2016 daemon.notice netifd: Interface 'wan' is setting up now Fri Nov 4 19:07:52 2016 daemon.notice netifd: wan (2060): sending -> AT Fri Nov 4 19:07:52 2016 daemon.notice netifd: wan (2060): sending -> ATZ Fri Nov 4 19:07:53 2016 daemon.notice netifd: wan (2060): sending -> ATQ0 Fri Nov 4 19:07:53 2016 daemon.notice netifd: wan (2060): sending -> ATV1 Fri Nov 4 19:07:54 2016 daemon.notice netifd: wan (2060): sending -> ATE1 Fri Nov 4 19:07:55 2016 daemon.notice netifd: wan (2060): sending -> ATS0=0 Fri Nov 4 19:07:55 2016 daemon.notice netifd: wan (2060): sending -> AT+CGDCONT=1,"IP","internet" Fri Nov 4 19:07:57 2016 daemon.notice netifd: wan (2060): sending -> AT^SYSCFGEX=\"03\",3fffffff,2,4,7fffffffffffffff,, Fri Nov 4 19:07:58 2016 daemon.notice netifd: wan (2060): Error running AT-command Fri Nov 4 19:07:58 2016 daemon.notice netifd: wan (2060): Failed to set operating mode Fri Nov 4 19:07:58 2016 daemon.notice netifd: wan (2092): Stopping network ... With this fix: Fri Nov 4 19:10:59 2016 daemon.notice netifd: Interface 'wan' is setting up now Fri Nov 4 19:11:01 2016 daemon.notice netifd: wan (2539): sending -> AT Fri Nov 4 19:11:01 2016 daemon.notice netifd: wan (2539): sending -> ATZ Fri Nov 4 19:11:02 2016 daemon.notice netifd: wan (2539): sending -> ATQ0 Fri Nov 4 19:11:03 2016 daemon.notice netifd: wan (2539): sending -> ATV1 Fri Nov 4 19:11:03 2016 daemon.notice netifd: wan (2539): sending -> ATE1 Fri Nov 4 19:11:04 2016 daemon.notice netifd: wan (2539): sending -> ATS0=0 Fri Nov 4 19:11:05 2016 daemon.notice netifd: wan (2539): sending -> AT+CGDCONT=1,"IP","internet" Fri Nov 4 19:11:06 2016 daemon.notice netifd: wan (2539): sending -> AT^SYSCFGEX="03",3fffffff,2,4,7fffffffffffffff,, Fri Nov 4 19:11:07 2016 daemon.notice netifd: wan (2539): sending -> AT^NDISDUP=1,1,"internet" Fri Nov 4 19:11:08 2016 daemon.notice netifd: wan (2539): Connected, starting DHCP on wwan0 Fri Nov 4 19:11:08 2016 daemon.notice netifd: Interface 'wan' is now up Fri Nov 4 19:11:08 2016 daemon.notice netifd: Network device 'wwan0' link is up Fri Nov 4 19:11:08 2016 daemon.notice netifd: Network alias 'wwan0' link is up Fri Nov 4 19:11:08 2016 daemon.notice netifd: Interface 'wan_4' is enabled Fri Nov 4 19:11:08 2016 daemon.notice netifd: Interface 'wan_4' has link connectivity Fri Nov 4 19:11:08 2016 daemon.notice netifd: Interface 'wan_4' is setting up now ... Signed-off-by: Cezary Jackiewicz <cezary@eko.one.pl>
2016-11-04 18:18:42 +00:00
eval COMMAND="$setmode" gcom -d "$device" -s /etc/gcom/runcommand.gcom || {
echo "Failed to set operating mode"
proto_notify_error "$interface" SETMODE_FAILED
return 1
}
json_select ..
}
echo "Starting network $interface"
json_get_vars connect
eval COMMAND="$connect" gcom -d "$device" -s /etc/gcom/runcommand.gcom || {
echo "Failed to connect"
proto_notify_error "$interface" CONNECT_FAILED
return 1
}
echo "Setting up $ifname"
proto_init_update "$ifname" 1
proto_add_data
json_add_string "manufacturer" "$manufacturer"
proto_close_data
proto_send_update "$interface"
[ "$pdptype" = "IP" -o "$pdptype" = "IPV4V6" ] && {
json_init
json_add_string name "${interface}_4"
json_add_string ifname "@$interface"
json_add_string proto "dhcp"
proto_add_dynamic_defaults
ubus call network add_dynamic "$(json_dump)"
}
[ "$pdptype" = "IPV6" -o "$pdptype" = "IPV4V6" ] && {
json_init
json_add_string name "${interface}_6"
json_add_string ifname "@$interface"
json_add_string proto "dhcpv6"
json_add_string extendprefix 1
proto_add_dynamic_defaults
ubus call network add_dynamic "$(json_dump)"
}
}
proto_ncm_teardown() {
local interface="$1"
local manufacturer disconnect
local device profile
json_get_vars device profile
[ -n "$ctl_device" ] && device=$ctl_device
[ -n "$profile" ] || profile=1
echo "Stopping network $interface"
json_load "$(ubus call network.interface.$interface status)"
json_select data
json_get_vars manufacturer
json_load "$(cat /etc/gcom/ncm.json)"
json_select "$manufacturer" || {
echo "Unsupported modem"
proto_notify_error "$interface" UNSUPPORTED_MODEM
return 1
}
json_get_vars disconnect
eval COMMAND="$disconnect" gcom -d "$device" -s /etc/gcom/runcommand.gcom || {
echo "Failed to disconnect"
proto_notify_error "$interface" DISCONNECT_FAILED
return 1
}
proto_init_update "*" 0
proto_send_update "$interface"
}
[ -n "$INCLUDE_ONLY" ] || {
add_protocol ncm
}