openwrt-owl/target/linux/ar71xx/image/ubnt.mk

277 lines
7.9 KiB
Makefile
Raw Normal View History

# UBNT_BOARD e.g. one of (XS2, XS5, RS, XM)
# UBNT_TYPE e.g. one of (BZ, XM, XW)
# UBNT_CHIP e.g. one of (ar7240, ar933x, ar934x)
# mkubntimage is using the kernel image direct
# routerboard creates partitions out of the ubnt header
define Build/mkubntimage
$(STAGING_DIR_HOST)/bin/mkfwimage \
-B $(UBNT_BOARD) -v $(UBNT_TYPE).$(UBNT_CHIP).v6.0.0-OpenWrt-$(REVISION) \
-k $(word 1,$^) \
-r $@ \
-o $@
endef
# all UBNT XM device expect the kernel image to have 1024k while flash, when
# booting the image, the size doesn't matter.
define Build/mkubntimage-split
dd if=$@ of=$@.old1 bs=1024k count=1
dd if=$@ of=$@.old2 bs=1024k skip=1
$(STAGING_DIR_HOST)/bin/mkfwimage \
-B $(UBNT_BOARD) -v $(UBNT_TYPE).$(UBNT_CHIP).v6.0.0-OpenWrt-$(REVISION) \
-k $@.old1 \
-r $@.old2 \
-o $@
rm $@.old1 $@.old2
endef
define Build/mkubntimage2
$(STAGING_DIR_HOST)/bin/mkfwimage2 -f 0x9f000000 \
-v $(UBNT_TYPE).$(UBNT_CHIP).v6.0.0-OpenWrt-$(REVISION) \
-p jffs2:0x50000:0xf60000:0:0:$@ \
-o $@.new
@mv $@.new $@
endef
DEVICE_VARS += UBNT_BOARD UBNT_CHIP UBNT_TYPE
# UBNT_BOARD e.g. one of (XS2, XS5, RS, XM)
# UBNT_TYPE e.g. one of (BZ, XM, XW)
# UBNT_CHIP e.g. one of (ar7240, ar933x, ar934x)
define Device/ubnt-xm
DEVICE_PACKAGES := kmod-usb-core kmod-usb-ohci kmod-usb2
DEVICE_PROFILE := UBNT
IMAGE_SIZE := 7552k
MTDPARTS = spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,7552k(firmware),256k(cfg)ro,64k(EEPROM)ro
UBNT_TYPE := XM
UBNT_BOARD := XM
UBNT_CHIP := ar7240
IMAGES := sysupgrade.bin factory.bin
IMAGE/factory.bin = $$(IMAGE/sysupgrade.bin) | mkubntimage-split
IMAGE/sysupgrade.bin = append-kernel $$$$(BLOCKSIZE) | append-rootfs | pad-rootfs | check-size $$$$(IMAGE_SIZE)
endef
define Device/ubnt-xw
DEVICE_PACKAGES := kmod-usb-core kmod-usb-ohci kmod-usb2
DEVICE_PROFILE := UBNT
IMAGE_SIZE := 7552k
MTDPARTS = spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,7552k(firmware),256k(cfg)ro,64k(EEPROM)ro
UBNT_TYPE := XW
UBNT_BOARD := XM
UBNT_CHIP := ar934x
IMAGES := sysupgrade.bin factory.bin
IMAGE/factory.bin = $$(IMAGE/sysupgrade.bin) | mkubntimage-split
IMAGE/sysupgrade.bin = append-kernel $$$$(BLOCKSIZE) | append-rootfs | pad-rootfs | check-size $$$$(IMAGE_SIZE)
endef
define Device/ubnt-bz
DEVICE_PACKAGES := kmod-usb-core kmod-usb-ohci kmod-usb2
DEVICE_PROFILE := UBNT
IMAGE_SIZE := 7552k
MTDPARTS = spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,7552k(firmware),256k(cfg)ro,64k(EEPROM)ro
UBNT_TYPE := BZ
UBNT_BOARD := XM
UBNT_CHIP := ar934x
IMAGES := sysupgrade.bin factory.bin
IMAGE/factory.bin = $$(IMAGE/sysupgrade.bin) | mkubntimage-split
IMAGE/sysupgrade.bin = append-kernel $$$$(BLOCKSIZE) | append-rootfs | pad-rootfs | check-size $$$$(IMAGE_SIZE)
endef
define Device/ubnt-unifiac
DEVICE_PACKAGES := kmod-usb-core kmod-usb-ohci kmod-usb2
DEVICE_PROFILE := UBNT
IMAGE_SIZE := 7744k
MTDPARTS = spi0.0:384k(u-boot)ro,64k(u-boot-env)ro,7744k(firmware),7744k(ubnt-airos)ro,128k(bs)ro,256k(cfg)ro,64k(EEPROM)ro
IMAGES := sysupgrade.bin
IMAGE/sysupgrade.bin = append-kernel $$$$(BLOCKSIZE) | append-rootfs | pad-rootfs | check-size $$$$(IMAGE_SIZE)
endef
define Device/rw2458n
$(Device/ubnt-xm)
DEVICE_TITLE := Ubiquiti RW2458N
BOARDNAME := RW2458N
endef
define Device/ubnt-airrouter
$(Device/ubnt-xm)
DEVICE_TITLE := Ubiquiti AirRouter
BOARDNAME := UBNT-AR
endef
define Device/ubnt-bullet-m
$(Device/ubnt-xm)
DEVICE_TITLE := Ubiquiti Bullet-M
BOARDNAME := UBNT-BM
endef
define Device/ubnt-rocket-m
$(Device/ubnt-xm)
DEVICE_TITLE := Ubiquiti Rocket-M
BOARDNAME := UBNT-RM
endef
define Device/ubnt-nano-m
$(Device/ubnt-xm)
DEVICE_TITLE := Ubiquiti Nano-M
BOARDNAME := UBNT-NM
endef
TARGET_DEVICES += rw2458n ubnt-airrouter ubnt-bullet-m ubnt-rocket-m ubnt-nano-m
define Device/ubnt-unifi
$(Device/ubnt-bz)
DEVICE_TITLE := Ubiquiti UniFi
BOARDNAME := UBNT-UF
DEVICE_PROFILE := UBNT UBNTUNIFI
endef
define Device/ubnt-unifiac-lite
$(Device/ubnt-unifiac)
DEVICE_TITLE := Ubiquiti UniFi AC-Lite
DEVICE_PACKAGES := kmod-ath10k ath10k-firmware-qca988x
DEVICE_PROFILE := UBNT UBNTUNIFIACLITE
BOARDNAME := UBNT-UF-AC-LITE
endef
define Device/ubnt-unifiac-pro
$(Device/ubnt-unifiac)
DEVICE_TITLE := Ubiquiti UniFi AC-Pro
DEVICE_PACKAGES := kmod-ath10k ath10k-firmware-qca988x kmod-usb-core kmod-usb-ohci kmod-usb2
DEVICE_PROFILE := UBNT UBNTUNIFIACPRO
BOARDNAME := UBNT-UF-AC-PRO
endef
define Device/ubnt-unifi-outdoor
$(Device/ubnt-bz)
DEVICE_TITLE := Ubiquiti UniFi Outdoor
BOARDNAME := UBNT-U20
DEVICE_PROFILE := UBNT UBNTUNIFIOUTDOOR
endef
TARGET_DEVICES += ubnt-unifi ubnt-unifiac-lite ubnt-unifiac-pro ubnt-unifi-outdoor
define Device/ubnt-nano-m-xw
$(Device/ubnt-xw)
DEVICE_TITLE := Ubiquiti Nano M XW
BOARDNAME := UBNT-NM-XW
endef
define Device/ubnt-loco-m-xw
$(Device/ubnt-xw)
DEVICE_TITLE := Ubiquiti Loco XW
BOARDNAME := UBNT-LOCO-XW
endef
define Device/ubnt-rocket-m-xw
$(Device/ubnt-xw)
DEVICE_TITLE := Ubiquiti Rocket M XW
BOARDNAME := UBNT-RM-XW
endef
define Device/ubnt-rocket-m-ti
$(Device/ubnt-xw)
DEVICE_TITLE := Ubiquiti Rocket M TI
BOARDNAME := UBNT-RM-TI
UBNT_TYPE := TI
UBNT_BOARD := XM
endef
TARGET_DEVICES += ubnt-nano-m-xw ubnt-loco-m-xw ubnt-rocket-m-xw ubnt-rocket-m-ti
define Device/ubnt-air-gateway
$(Device/ubnt-xm)
DEVICE_TITLE := Ubiquiti Air Gateway
BOARDNAME := UBNT-AGW
UBNT_BOARD := XM
UBNT_TYPE := AirGW
UBNT_CHIP := ar933x
CONSOLE = ttyATH0,115200
endef
TARGET_DEVICES += ubnt-air-gateway
define Device/ubnt-air-gateway-pro
$(Device/ubnt-xm)
DEVICE_TITLE := Ubiquiti Air Gateway Pro
BOARDNAME := UBNT-AGWP
UBNT_TYPE := AirGWP
UBNT_CHIP := ar934x
CONSOLE = ttyS0,115200
endef
TARGET_DEVICES += ubnt-air-gateway-pro
define Device/ubdev01
$(Device/ubnt-xm)
DEVICE_TITLE := Ubiquiti ubDEV01
MTDPARTS := spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,7488k(firmware),64k(certs),256k(cfg)ro,64k(EEPROM)ro
BOARDNAME := UBNT-UF
UBNT_BOARD := UBDEV01
UBNT_TYPE := XM
UBNT_CHIP := ar7240
endef
TARGET_DEVICES += ubdev01
define Device/ubnt-routerstation
DEVICE_TITLE := Ubiquiti RouterStation
DEVICE_PACKAGES := kmod-usb-core kmod-usb-ohci kmod-usb2
IMAGE_SIZE := 16128k
IMAGES := sysupgrade.bin factory.bin
IMAGE/factory.bin = append-rootfs | pad-rootfs | mkubntimage
IMAGE/sysupgrade.bin = append-rootfs | pad-rootfs | combined-image | check-size $$$$(IMAGE_SIZE)
KERNEL := kernel-bin | patch-cmdline | lzma | pad-to $$(BLOCKSIZE)
endef
define Device/ubnt-rs
$(Device/ubnt-routerstation)
DEVICE_TITLE := Ubiquiti RouterStation
BOARDNAME := UBNT-RS
DEVICE_PROFILE := Madwifi UBNT UBNTRS
UBNT_BOARD := RS
UBNT_TYPE := RSx
UBNT_CHIP := ar7100
endef
define Device/ubnt-rspro
$(Device/ubnt-routerstation)
DEVICE_TITLE := Ubiquiti RouterStation Pro
BOARDNAME := UBNT-RSPRO
DEVICE_PROFILE := Madwifi UBNT UBNTRSPRO
UBNT_BOARD := RSPRO
UBNT_TYPE := RSPRO
UBNT_CHIP := ar7100pro
endef
define Device/ubnt-ls-sr71
$(Device/ubnt-routerstation)
DEVICE_TITLE := Ubiquiti LS-SR71
BOARDNAME := UBNT-LS-SR71
DEVICE_PROFILE := Madwifi UBNT
UBNT_BOARD := LS-SR71
UBNT_TYPE := LS-SR71
UBNT_CHIP := ar7100
endef
TARGET_DEVICES += ubnt-rs ubnt-rspro ubnt-ls-sr71
define Device/ubnt-uap-pro
DEVICE_TITLE := Ubiquiti UAP Pro
KERNEL_SIZE := 1536k
IMAGE_SIZE := 15744k
MTDPARTS := spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,1536k(kernel),14208k(rootfs),256k(cfg)ro,64k(EEPROM)ro,15744k@0x50000(firmware)
UBNT_TYPE := BZ
UBNT_CHIP := ar934x
BOARDNAME := UAP-PRO
DEVICE_PROFILE := UBNT UAPPRO
KERNEL := kernel-bin | patch-cmdline | lzma | uImage lzma | jffs2 kernel0
IMAGES := sysupgrade.bin factory.bin
IMAGE/sysupgrade.bin = append-kernel $$$$(KERNEL_SIZE) | append-rootfs | pad-rootfs | check-size $$$$(IMAGE_SIZE)
IMAGE/factory.bin = $$(IMAGE/sysupgrade.bin) | mkubntimage2
endef
define Device/ubnt-unifi-outdoor-plus
$(Device/ubnt-uap-pro)
DEVICE_TITLE := Ubiquiti UniFi Outdoor Pro
UBNT_CHIP := ar7240
BOARDNAME := UBNT-UOP
DEVICE_PROFILE := UBNT
endef
TARGET_DEVICES += ubnt-uap-pro ubnt-unifi-outdoor-plus