openwrt-owl/target/linux/mvebu/patches-4.4/300-reprobe_sfp_phy.patch

97 lines
2.6 KiB
Diff
Raw Normal View History

From 28baa5e2635285b178326b301f534ed95c65dd01 Mon Sep 17 00:00:00 2001
From: Jonas Gorski <jonas.gorski@gmail.com>
Date: Thu, 29 Sep 2016 11:44:39 +0200
Subject: [PATCH] sfp: retry phy probe if unsuccessful
Some phys seem to take longer than 50 ms to come out of reset, so retry
until we find a phy.
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
---
drivers/net/phy/sfp.c | 38 +++++++++++++++++++++++++-------------
1 file changed, 25 insertions(+), 13 deletions(-)
--- a/drivers/net/phy/sfp.c
+++ b/drivers/net/phy/sfp.c
@@ -488,7 +488,7 @@ static void sfp_sm_phy_detach(struct sfp
sfp->mod_phy = NULL;
}
-static void sfp_sm_probe_phy(struct sfp *sfp)
+static int sfp_sm_probe_phy(struct sfp *sfp)
{
struct phy_device *phy;
int err;
@@ -498,11 +498,11 @@ static void sfp_sm_probe_phy(struct sfp
phy = mdiobus_scan(sfp->i2c_mii, SFP_PHY_ADDR);
if (IS_ERR(phy)) {
dev_err(sfp->dev, "mdiobus scan returned %ld\n", PTR_ERR(phy));
- return;
+ return PTR_ERR(phy);
}
if (!phy) {
- dev_info(sfp->dev, "no PHY detected\n");
- return;
+ dev_dbg(sfp->dev, "no PHY detected\n");
+ return -EAGAIN;
}
err = phylink_connect_phy(sfp->phylink, phy);
@@ -510,11 +510,13 @@ static void sfp_sm_probe_phy(struct sfp
phy_device_remove(phy);
phy_device_free(phy);
dev_err(sfp->dev, "phylink_connect_phy failed: %d\n", err);
- return;
+ return err;
}
sfp->mod_phy = phy;
phy_start(phy);
+
+ return 0;
}
static void sfp_sm_link_up(struct sfp *sfp)
@@ -565,13 +567,6 @@ static void sfp_sm_mod_init(struct sfp *
{
sfp_module_tx_enable(sfp);
- /* Wait t_init before indicating that the link is up, provided the
- * current state indicates no TX_FAULT. If TX_FAULT clears before
- * this time, that's fine too.
- */
- sfp_sm_next(sfp, SFP_S_INIT, T_INIT_JIFFIES);
- sfp->sm_retries = 5;
-
if (sfp->phylink) {
/* Setting the serdes link mode is guesswork: there's no
* field in the EEPROM which indicates what mode should
@@ -587,9 +582,26 @@ static void sfp_sm_mod_init(struct sfp *
!sfp->id.base.e100_base_fx) {
phylink_set_link_an_mode(sfp->phylink, MLO_AN_8023Z);
} else {
+ int ret;
+
phylink_set_link_an_mode(sfp->phylink, MLO_AN_SGMII);
- sfp_sm_probe_phy(sfp);
+
+ ret = sfp_sm_probe_phy(sfp);
+ if (ret) {
+ if (ret == -EAGAIN)
+ sfp_sm_set_timer(sfp, T_PROBE_RETRY);
+ else
+ sfp_sm_next(sfp, SFP_S_TX_DISABLE, 0);
+ return;
+ }
}
+
+ /* Wait t_init before indicating that the link is up, provided the
+ * current state indicates no TX_FAULT. If TX_FAULT clears before
+ * this time, that's fine too.
+ */
+ sfp_sm_next(sfp, SFP_S_INIT, T_INIT_JIFFIES);
+ sfp->sm_retries = 5;
}
}