openwrt-owl/target/linux/mediatek/patches-4.4/0079-net-next-mediatek-add-...

44 lines
1.6 KiB
Diff
Raw Normal View History

From 09f0b50ae838bd6e2bbf0aa22de9f352122297de Mon Sep 17 00:00:00 2001
From: John Crispin <john@phrozen.org>
Date: Fri, 22 Apr 2016 11:06:03 +0200
Subject: [PATCH 079/102] net-next: mediatek: add fixed-phy support
The MT7623 SoC has a builtin gigabit switch. If we want to use it, GMAC1
needs to be configured using a fixed link speed and flow control settings.
The easiest way to do this is to used the fixed-phy driver, allowing us to
reuse the existing mdio polling code to setup the MAC.
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: John Crispin <john@phrozen.org>
---
drivers/net/ethernet/mediatek/mtk_eth_soc.c | 6 ++++++
1 file changed, 6 insertions(+)
diff --git a/drivers/net/ethernet/mediatek/mtk_eth_soc.c b/drivers/net/ethernet/mediatek/mtk_eth_soc.c
index 3436c7b..ab61789 100644
--- a/drivers/net/ethernet/mediatek/mtk_eth_soc.c
+++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.c
@@ -229,6 +229,9 @@ static int mtk_phy_connect(struct mtk_mac *mac)
u32 val, ge_mode;
np = of_parse_phandle(mac->of_node, "phy-handle", 0);
+ if (!np && of_phy_is_fixed_link(mac->of_node))
+ if (!of_phy_register_fixed_link(mac->of_node))
+ np = of_node_get(mac->of_node);
if (!np)
return -ENODEV;
@@ -257,6 +260,9 @@ static int mtk_phy_connect(struct mtk_mac *mac)
mac->phy_dev->autoneg = AUTONEG_ENABLE;
mac->phy_dev->speed = 0;
mac->phy_dev->duplex = 0;
+ if (of_phy_is_fixed_link(mac->of_node))
+ mac->phy_dev->supported |= SUPPORTED_Pause |
+ SUPPORTED_Asym_Pause;
mac->phy_dev->supported &= PHY_GBIT_FEATURES | SUPPORTED_Pause |
SUPPORTED_Asym_Pause;
mac->phy_dev->advertising = mac->phy_dev->supported |
--
1.7.10.4