mirror of https://github.com/hak5/openwrt-owl.git
1400 lines
37 KiB
C
1400 lines
37 KiB
C
|
/*
|
||
|
* (C) Copyright 2003
|
||
|
* Kyle Harris, Nexus Technologies, Inc. kharris@nexus-tech.net
|
||
|
*
|
||
|
* See file CREDITS for list of people who contributed to this
|
||
|
* project.
|
||
|
*
|
||
|
* This program is free software; you can redistribute it and/or
|
||
|
* modify it under the terms of the GNU General Public License as
|
||
|
* published by the Free Software Foundation; either version 2 of
|
||
|
* the License, or (at your option) any later version.
|
||
|
*
|
||
|
* This program is distributed in the hope that it will be useful,
|
||
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||
|
* GNU General Public License for more details.
|
||
|
*
|
||
|
* You should have received a copy of the GNU General Public License
|
||
|
* along with this program; if not, write to the Free Software
|
||
|
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
|
||
|
* MA 02111-1307 USA
|
||
|
*/
|
||
|
|
||
|
#include <config.h>
|
||
|
#include <common.h>
|
||
|
#include <part.h>
|
||
|
|
||
|
#if defined CONFIG_JZ4740
|
||
|
#include <asm-mips/jz4740.h>
|
||
|
|
||
|
#include "jz_mmc.h"
|
||
|
|
||
|
#define CFG_MMC_BASE 0x80600000
|
||
|
static int sd2_0 = 0;
|
||
|
|
||
|
/*
|
||
|
* GPIO definition
|
||
|
*/
|
||
|
#define __msc_init_io() \
|
||
|
do { \
|
||
|
__gpio_as_output(GPIO_SD_VCC_EN_N); \
|
||
|
__gpio_as_input(GPIO_SD_CD_N); \
|
||
|
} while (0)
|
||
|
|
||
|
#define __msc_enable_power() \
|
||
|
do { \
|
||
|
__gpio_clear_pin(GPIO_SD_VCC_EN_N); \
|
||
|
} while (0)
|
||
|
|
||
|
#define __msc_disable_power() \
|
||
|
do { \
|
||
|
__gpio_set_pin(GPIO_SD_VCC_EN_N); \
|
||
|
} while (0)
|
||
|
|
||
|
#define __msc_card_detected() \
|
||
|
({ \
|
||
|
int detected = 1; \
|
||
|
__gpio_as_input(GPIO_SD_CD_N); \
|
||
|
if (!__gpio_get_pin(GPIO_SD_CD_N)) \
|
||
|
detected = 0; \
|
||
|
detected; \
|
||
|
})
|
||
|
|
||
|
/*
|
||
|
* Local functions
|
||
|
*/
|
||
|
|
||
|
#ifdef CONFIG_MMC
|
||
|
extern int
|
||
|
fat_register_device(block_dev_desc_t *dev_desc, int part_no);
|
||
|
|
||
|
static block_dev_desc_t mmc_dev;
|
||
|
|
||
|
block_dev_desc_t * mmc_get_dev(int dev)
|
||
|
{
|
||
|
return ((block_dev_desc_t *)&mmc_dev);
|
||
|
}
|
||
|
|
||
|
/*
|
||
|
* FIXME needs to read cid and csd info to determine block size
|
||
|
* and other parameters
|
||
|
*/
|
||
|
static uchar mmc_buf[MMC_BLOCK_SIZE];
|
||
|
static int mmc_ready = 0;
|
||
|
static mmc_csd_t mmc_csd;
|
||
|
static int use_4bit; /* Use 4-bit data bus */
|
||
|
/*
|
||
|
* MMC Events
|
||
|
*/
|
||
|
#define MMC_EVENT_NONE 0x00 /* No events */
|
||
|
#define MMC_EVENT_RX_DATA_DONE 0x01 /* Rx data done */
|
||
|
#define MMC_EVENT_TX_DATA_DONE 0x02 /* Tx data done */
|
||
|
#define MMC_EVENT_PROG_DONE 0x04 /* Programming is done */
|
||
|
|
||
|
|
||
|
#define MMC_IRQ_MASK() \
|
||
|
do { \
|
||
|
REG_MSC_IMASK = 0xffff; \
|
||
|
REG_MSC_IREG = 0xffff; \
|
||
|
} while (0)
|
||
|
|
||
|
/* Stop the MMC clock and wait while it happens */
|
||
|
static inline int jz_mmc_stop_clock(void)
|
||
|
{
|
||
|
int timeout = 1000;
|
||
|
|
||
|
REG_MSC_STRPCL = MSC_STRPCL_CLOCK_CONTROL_STOP;
|
||
|
|
||
|
while (timeout && (REG_MSC_STAT & MSC_STAT_CLK_EN)) {
|
||
|
timeout--;
|
||
|
if (timeout == 0) {
|
||
|
return MMC_ERROR_TIMEOUT;
|
||
|
}
|
||
|
udelay(1);
|
||
|
}
|
||
|
return MMC_NO_ERROR;
|
||
|
}
|
||
|
|
||
|
/* Start the MMC clock and operation */
|
||
|
static inline int jz_mmc_start_clock(void)
|
||
|
{
|
||
|
REG_MSC_STRPCL = MSC_STRPCL_CLOCK_CONTROL_START | MSC_STRPCL_START_OP;
|
||
|
return MMC_NO_ERROR;
|
||
|
}
|
||
|
|
||
|
static inline u32 jz_mmc_calc_clkrt(int is_sd, u32 rate)
|
||
|
{
|
||
|
u32 clkrt;
|
||
|
u32 clk_src = is_sd ? 24000000: 16000000;
|
||
|
|
||
|
clkrt = 0;
|
||
|
while (rate < clk_src)
|
||
|
{
|
||
|
clkrt ++;
|
||
|
clk_src >>= 1;
|
||
|
}
|
||
|
return clkrt;
|
||
|
}
|
||
|
|
||
|
/* Set the MMC clock frequency */
|
||
|
void jz_mmc_set_clock(int sd, u32 rate)
|
||
|
{
|
||
|
jz_mmc_stop_clock();
|
||
|
|
||
|
/* Select clock source of MSC */
|
||
|
__cpm_select_msc_clk(sd);
|
||
|
|
||
|
/* Set clock dividor of MSC */
|
||
|
REG_MSC_CLKRT = jz_mmc_calc_clkrt(sd, rate);
|
||
|
}
|
||
|
|
||
|
static int jz_mmc_check_status(struct mmc_request *request)
|
||
|
{
|
||
|
u32 status = REG_MSC_STAT;
|
||
|
|
||
|
/* Checking for response or data timeout */
|
||
|
if (status & (MSC_STAT_TIME_OUT_RES | MSC_STAT_TIME_OUT_READ)) {
|
||
|
printf("MMC/SD timeout, MMC_STAT 0x%x CMD %d\n", status, request->cmd);
|
||
|
return MMC_ERROR_TIMEOUT;
|
||
|
}
|
||
|
|
||
|
/* Checking for CRC error */
|
||
|
if (status & (MSC_STAT_CRC_READ_ERROR | MSC_STAT_CRC_WRITE_ERROR | MSC_STAT_CRC_RES_ERR)) {
|
||
|
printf("MMC/CD CRC error, MMC_STAT 0x%x\n", status);
|
||
|
return MMC_ERROR_CRC;
|
||
|
}
|
||
|
|
||
|
return MMC_NO_ERROR;
|
||
|
}
|
||
|
|
||
|
/* Obtain response to the command and store it to response buffer */
|
||
|
static void jz_mmc_get_response(struct mmc_request *request)
|
||
|
{
|
||
|
int i;
|
||
|
u8 *buf;
|
||
|
u32 data;
|
||
|
|
||
|
DEBUG(3, "fetch response for request %d, cmd %d\n", request->rtype, request->cmd);
|
||
|
|
||
|
buf = request->response;
|
||
|
request->result = MMC_NO_ERROR;
|
||
|
|
||
|
switch (request->rtype) {
|
||
|
case RESPONSE_R1: case RESPONSE_R1B: case RESPONSE_R6:
|
||
|
case RESPONSE_R3: case RESPONSE_R4: case RESPONSE_R5:
|
||
|
{
|
||
|
data = REG_MSC_RES;
|
||
|
buf[0] = (data >> 8) & 0xff;
|
||
|
buf[1] = data & 0xff;
|
||
|
data = REG_MSC_RES;
|
||
|
buf[2] = (data >> 8) & 0xff;
|
||
|
buf[3] = data & 0xff;
|
||
|
data = REG_MSC_RES;
|
||
|
buf[4] = data & 0xff;
|
||
|
|
||
|
DEBUG(3, "request %d, response [%02x %02x %02x %02x %02x]\n",
|
||
|
request->rtype, buf[0], buf[1], buf[2], buf[3], buf[4]);
|
||
|
break;
|
||
|
}
|
||
|
case RESPONSE_R2_CID: case RESPONSE_R2_CSD:
|
||
|
{
|
||
|
for (i = 0; i < 16; i += 2) {
|
||
|
data = REG_MSC_RES;
|
||
|
buf[i] = (data >> 8) & 0xff;
|
||
|
buf[i+1] = data & 0xff;
|
||
|
}
|
||
|
DEBUG(3, "request %d, response [", request->rtype);
|
||
|
#if CONFIG_MMC_DEBUG_VERBOSE > 2
|
||
|
if (g_mmc_debug >= 3) {
|
||
|
int n;
|
||
|
for (n = 0; n < 17; n++)
|
||
|
printk("%02x ", buf[n]);
|
||
|
printk("]\n");
|
||
|
}
|
||
|
#endif
|
||
|
break;
|
||
|
}
|
||
|
case RESPONSE_NONE:
|
||
|
DEBUG(3, "No response\n");
|
||
|
break;
|
||
|
|
||
|
default:
|
||
|
DEBUG(3, "unhandled response type for request %d\n", request->rtype);
|
||
|
break;
|
||
|
}
|
||
|
}
|
||
|
|
||
|
static int jz_mmc_receive_data(struct mmc_request *req)
|
||
|
{
|
||
|
u32 stat, timeout, data, cnt;
|
||
|
u8 *buf = req->buffer;
|
||
|
u32 wblocklen = (u32)(req->block_len + 3) >> 2; /* length in word */
|
||
|
|
||
|
timeout = 0x3ffffff;
|
||
|
|
||
|
while (timeout) {
|
||
|
timeout--;
|
||
|
stat = REG_MSC_STAT;
|
||
|
|
||
|
if (stat & MSC_STAT_TIME_OUT_READ)
|
||
|
return MMC_ERROR_TIMEOUT;
|
||
|
else if (stat & MSC_STAT_CRC_READ_ERROR)
|
||
|
return MMC_ERROR_CRC;
|
||
|
else if (!(stat & MSC_STAT_DATA_FIFO_EMPTY)
|
||
|
|| (stat & MSC_STAT_DATA_FIFO_AFULL)) {
|
||
|
/* Ready to read data */
|
||
|
break;
|
||
|
}
|
||
|
udelay(1);
|
||
|
}
|
||
|
if (!timeout)
|
||
|
return MMC_ERROR_TIMEOUT;
|
||
|
|
||
|
/* Read data from RXFIFO. It could be FULL or PARTIAL FULL */
|
||
|
cnt = wblocklen;
|
||
|
while (cnt) {
|
||
|
data = REG_MSC_RXFIFO;
|
||
|
{
|
||
|
*buf++ = (u8)(data >> 0);
|
||
|
*buf++ = (u8)(data >> 8);
|
||
|
*buf++ = (u8)(data >> 16);
|
||
|
*buf++ = (u8)(data >> 24);
|
||
|
}
|
||
|
cnt --;
|
||
|
while (cnt && (REG_MSC_STAT & MSC_STAT_DATA_FIFO_EMPTY))
|
||
|
;
|
||
|
}
|
||
|
return MMC_NO_ERROR;
|
||
|
}
|
||
|
|
||
|
static int jz_mmc_transmit_data(struct mmc_request *req)
|
||
|
{
|
||
|
#if 0
|
||
|
u32 nob = req->nob;
|
||
|
u32 wblocklen = (u32)(req->block_len + 3) >> 2; /* length in word */
|
||
|
u8 *buf = req->buffer;
|
||
|
u32 *wbuf = (u32 *)buf;
|
||
|
u32 waligned = (((u32)buf & 0x3) == 0); /* word aligned ? */
|
||
|
u32 stat, timeout, data, cnt;
|
||
|
|
||
|
for (nob; nob >= 1; nob--) {
|
||
|
timeout = 0x3FFFFFF;
|
||
|
|
||
|
while (timeout) {
|
||
|
timeout--;
|
||
|
stat = REG_MSC_STAT;
|
||
|
|
||
|
if (stat & (MSC_STAT_CRC_WRITE_ERROR | MSC_STAT_CRC_WRITE_ERROR_NOSTS))
|
||
|
return MMC_ERROR_CRC;
|
||
|
else if (!(stat & MSC_STAT_DATA_FIFO_FULL)) {
|
||
|
/* Ready to write data */
|
||
|
break;
|
||
|
}
|
||
|
|
||
|
udelay(1);
|
||
|
}
|
||
|
|
||
|
if (!timeout)
|
||
|
return MMC_ERROR_TIMEOUT;
|
||
|
|
||
|
/* Write data to TXFIFO */
|
||
|
cnt = wblocklen;
|
||
|
while (cnt) {
|
||
|
while (REG_MSC_STAT & MSC_STAT_DATA_FIFO_FULL)
|
||
|
;
|
||
|
|
||
|
if (waligned) {
|
||
|
REG_MSC_TXFIFO = *wbuf++;
|
||
|
}
|
||
|
else {
|
||
|
data = *buf++ | (*buf++ << 8) | (*buf++ << 16) | (*buf++ << 24);
|
||
|
REG_MSC_TXFIFO = data;
|
||
|
}
|
||
|
|
||
|
cnt--;
|
||
|
}
|
||
|
}
|
||
|
#endif
|
||
|
return MMC_NO_ERROR;
|
||
|
}
|
||
|
|
||
|
|
||
|
/*
|
||
|
* Name: int jz_mmc_exec_cmd()
|
||
|
* Function: send command to the card, and get a response
|
||
|
* Input: struct mmc_request *req : MMC/SD request
|
||
|
* Output: 0: right >0: error code
|
||
|
*/
|
||
|
int jz_mmc_exec_cmd(struct mmc_request *request)
|
||
|
{
|
||
|
u32 cmdat = 0, events = 0;
|
||
|
int retval, timeout = 0x3fffff;
|
||
|
|
||
|
/* Indicate we have no result yet */
|
||
|
request->result = MMC_NO_RESPONSE;
|
||
|
if (request->cmd == MMC_CIM_RESET) {
|
||
|
/* On reset, 1-bit bus width */
|
||
|
use_4bit = 0;
|
||
|
|
||
|
/* Reset MMC/SD controller */
|
||
|
__msc_reset();
|
||
|
|
||
|
/* On reset, drop MMC clock down */
|
||
|
jz_mmc_set_clock(0, MMC_CLOCK_SLOW);
|
||
|
|
||
|
/* On reset, stop MMC clock */
|
||
|
jz_mmc_stop_clock();
|
||
|
}
|
||
|
if (request->cmd == MMC_SEND_OP_COND) {
|
||
|
DEBUG(3, "Have an MMC card\n");
|
||
|
/* always use 1bit for MMC */
|
||
|
use_4bit = 0;
|
||
|
}
|
||
|
if (request->cmd == SET_BUS_WIDTH) {
|
||
|
if (request->arg == 0x2) {
|
||
|
DEBUG(2, "Use 4-bit bus width\n");
|
||
|
use_4bit = 1;
|
||
|
}
|
||
|
else {
|
||
|
DEBUG(2, "Use 1-bit bus width\n");
|
||
|
use_4bit = 0;
|
||
|
}
|
||
|
}
|
||
|
|
||
|
/* stop clock */
|
||
|
jz_mmc_stop_clock();
|
||
|
|
||
|
/* mask all interrupts */
|
||
|
REG_MSC_IMASK = 0xffff;
|
||
|
|
||
|
/* clear status */
|
||
|
REG_MSC_IREG = 0xffff;
|
||
|
|
||
|
/* use 4-bit bus width when possible */
|
||
|
if (use_4bit)
|
||
|
cmdat |= MSC_CMDAT_BUS_WIDTH_4BIT;
|
||
|
|
||
|
/* Set command type and events */
|
||
|
switch (request->cmd) {
|
||
|
/* MMC core extra command */
|
||
|
case MMC_CIM_RESET:
|
||
|
cmdat |= MSC_CMDAT_INIT; /* Initialization sequence sent prior to command */
|
||
|
break;
|
||
|
|
||
|
/* bc - broadcast - no response */
|
||
|
case MMC_GO_IDLE_STATE:
|
||
|
case MMC_SET_DSR:
|
||
|
break;
|
||
|
|
||
|
/* bcr - broadcast with response */
|
||
|
case MMC_SEND_OP_COND:
|
||
|
case MMC_ALL_SEND_CID:
|
||
|
case MMC_GO_IRQ_STATE:
|
||
|
break;
|
||
|
|
||
|
/* adtc - addressed with data transfer */
|
||
|
case MMC_READ_DAT_UNTIL_STOP:
|
||
|
case MMC_READ_SINGLE_BLOCK:
|
||
|
case MMC_READ_MULTIPLE_BLOCK:
|
||
|
case SEND_SCR:
|
||
|
cmdat |= MSC_CMDAT_DATA_EN | MSC_CMDAT_READ;
|
||
|
events = MMC_EVENT_RX_DATA_DONE;
|
||
|
break;
|
||
|
|
||
|
case MMC_WRITE_DAT_UNTIL_STOP:
|
||
|
case MMC_WRITE_BLOCK:
|
||
|
case MMC_WRITE_MULTIPLE_BLOCK:
|
||
|
case MMC_PROGRAM_CID:
|
||
|
case MMC_PROGRAM_CSD:
|
||
|
case MMC_SEND_WRITE_PROT:
|
||
|
case MMC_GEN_CMD:
|
||
|
case MMC_LOCK_UNLOCK:
|
||
|
cmdat |= MSC_CMDAT_DATA_EN | MSC_CMDAT_WRITE;
|
||
|
events = MMC_EVENT_TX_DATA_DONE | MMC_EVENT_PROG_DONE;
|
||
|
|
||
|
break;
|
||
|
|
||
|
case MMC_STOP_TRANSMISSION:
|
||
|
events = MMC_EVENT_PROG_DONE;
|
||
|
break;
|
||
|
|
||
|
/* ac - no data transfer */
|
||
|
default:
|
||
|
break;
|
||
|
}
|
||
|
|
||
|
/* Set response type */
|
||
|
switch (request->rtype) {
|
||
|
case RESPONSE_NONE:
|
||
|
break;
|
||
|
|
||
|
case RESPONSE_R1B:
|
||
|
cmdat |= MSC_CMDAT_BUSY;
|
||
|
/*FALLTHRU*/
|
||
|
case RESPONSE_R1:
|
||
|
cmdat |= MSC_CMDAT_RESPONSE_R1;
|
||
|
break;
|
||
|
case RESPONSE_R2_CID:
|
||
|
case RESPONSE_R2_CSD:
|
||
|
cmdat |= MSC_CMDAT_RESPONSE_R2;
|
||
|
break;
|
||
|
case RESPONSE_R3:
|
||
|
cmdat |= MSC_CMDAT_RESPONSE_R3;
|
||
|
break;
|
||
|
case RESPONSE_R4:
|
||
|
cmdat |= MSC_CMDAT_RESPONSE_R4;
|
||
|
break;
|
||
|
case RESPONSE_R5:
|
||
|
cmdat |= MSC_CMDAT_RESPONSE_R5;
|
||
|
break;
|
||
|
case RESPONSE_R6:
|
||
|
cmdat |= MSC_CMDAT_RESPONSE_R6;
|
||
|
break;
|
||
|
default:
|
||
|
break;
|
||
|
}
|
||
|
|
||
|
/* Set command index */
|
||
|
if (request->cmd == MMC_CIM_RESET) {
|
||
|
REG_MSC_CMD = MMC_GO_IDLE_STATE;
|
||
|
} else {
|
||
|
REG_MSC_CMD = request->cmd;
|
||
|
}
|
||
|
|
||
|
/* Set argument */
|
||
|
REG_MSC_ARG = request->arg;
|
||
|
|
||
|
/* Set block length and nob */
|
||
|
if (request->cmd == SEND_SCR) { /* get SCR from DataFIFO */
|
||
|
REG_MSC_BLKLEN = 8;
|
||
|
REG_MSC_NOB = 1;
|
||
|
} else {
|
||
|
REG_MSC_BLKLEN = request->block_len;
|
||
|
REG_MSC_NOB = request->nob;
|
||
|
}
|
||
|
|
||
|
/* Set command */
|
||
|
REG_MSC_CMDAT = cmdat;
|
||
|
|
||
|
DEBUG(1, "Send cmd %d cmdat: %x arg: %x resp %d\n", request->cmd,
|
||
|
cmdat, request->arg, request->rtype);
|
||
|
|
||
|
/* Start MMC/SD clock and send command to card */
|
||
|
jz_mmc_start_clock();
|
||
|
|
||
|
/* Wait for command completion */
|
||
|
while (timeout-- && !(REG_MSC_STAT & MSC_STAT_END_CMD_RES))
|
||
|
;
|
||
|
|
||
|
if (timeout == 0)
|
||
|
return MMC_ERROR_TIMEOUT;
|
||
|
|
||
|
REG_MSC_IREG = MSC_IREG_END_CMD_RES; /* clear flag */
|
||
|
|
||
|
/* Check for status */
|
||
|
retval = jz_mmc_check_status(request);
|
||
|
if (retval) {
|
||
|
return retval;
|
||
|
}
|
||
|
|
||
|
/* Complete command with no response */
|
||
|
if (request->rtype == RESPONSE_NONE) {
|
||
|
return MMC_NO_ERROR;
|
||
|
}
|
||
|
|
||
|
/* Get response */
|
||
|
jz_mmc_get_response(request);
|
||
|
|
||
|
/* Start data operation */
|
||
|
if (events & (MMC_EVENT_RX_DATA_DONE | MMC_EVENT_TX_DATA_DONE)) {
|
||
|
if (events & MMC_EVENT_RX_DATA_DONE) {
|
||
|
if (request->cmd == SEND_SCR) {
|
||
|
/* SD card returns SCR register as data.
|
||
|
MMC core expect it in the response buffer,
|
||
|
after normal response. */
|
||
|
request->buffer = (u8 *)((u32)request->response + 5);
|
||
|
}
|
||
|
jz_mmc_receive_data(request);
|
||
|
}
|
||
|
|
||
|
if (events & MMC_EVENT_TX_DATA_DONE) {
|
||
|
jz_mmc_transmit_data(request);
|
||
|
}
|
||
|
|
||
|
/* Wait for Data Done */
|
||
|
while (!(REG_MSC_IREG & MSC_IREG_DATA_TRAN_DONE))
|
||
|
;
|
||
|
REG_MSC_IREG = MSC_IREG_DATA_TRAN_DONE; /* clear status */
|
||
|
}
|
||
|
|
||
|
/* Wait for Prog Done event */
|
||
|
if (events & MMC_EVENT_PROG_DONE) {
|
||
|
while (!(REG_MSC_IREG & MSC_IREG_PRG_DONE))
|
||
|
;
|
||
|
REG_MSC_IREG = MSC_IREG_PRG_DONE; /* clear status */
|
||
|
}
|
||
|
|
||
|
/* Command completed */
|
||
|
|
||
|
return MMC_NO_ERROR; /* return successfully */
|
||
|
}
|
||
|
|
||
|
int mmc_block_read(u8 *dst, ulong src, ulong len)
|
||
|
{
|
||
|
|
||
|
struct mmc_request request;
|
||
|
struct mmc_response_r1 r1;
|
||
|
int retval;
|
||
|
|
||
|
if (len == 0) {
|
||
|
return 0;
|
||
|
}
|
||
|
mmc_simple_cmd(&request, MMC_SEND_STATUS, mmcinfo.rca, RESPONSE_R1);
|
||
|
retval = mmc_unpack_r1(&request, &r1, 0);
|
||
|
if (retval && (retval != MMC_ERROR_STATE_MISMATCH)) {
|
||
|
return retval;
|
||
|
}
|
||
|
|
||
|
mmc_simple_cmd(&request, MMC_SET_BLOCKLEN, len, RESPONSE_R1);
|
||
|
if ((retval = mmc_unpack_r1(&request, &r1, 0))) {
|
||
|
return retval;
|
||
|
}
|
||
|
|
||
|
if (sd2_0)
|
||
|
src /= len;
|
||
|
|
||
|
mmc_send_cmd(&request, MMC_READ_SINGLE_BLOCK, src, 1,len, RESPONSE_R1, dst);
|
||
|
if ((retval = mmc_unpack_r1(&request, &r1, 0))) {
|
||
|
return retval;
|
||
|
}
|
||
|
return retval;
|
||
|
}
|
||
|
|
||
|
int mmc_block_write(ulong dst, uchar *src, int len)
|
||
|
{
|
||
|
return 0;
|
||
|
}
|
||
|
|
||
|
int mmc_read(ulong src, uchar *dst, int size)
|
||
|
{
|
||
|
ulong end, part_start, part_end, part_len, aligned_start, aligned_end;
|
||
|
ulong mmc_block_size, mmc_block_address;
|
||
|
|
||
|
if (size == 0) {
|
||
|
return 0;
|
||
|
}
|
||
|
|
||
|
if (!mmc_ready) {
|
||
|
printf("MMC card is not ready\n");
|
||
|
return -1;
|
||
|
}
|
||
|
|
||
|
mmc_block_size = MMC_BLOCK_SIZE;
|
||
|
mmc_block_address = ~(mmc_block_size - 1);
|
||
|
|
||
|
src -= CFG_MMC_BASE;
|
||
|
end = src + size;
|
||
|
part_start = ~mmc_block_address & src;
|
||
|
part_end = ~mmc_block_address & end;
|
||
|
aligned_start = mmc_block_address & src;
|
||
|
aligned_end = mmc_block_address & end;
|
||
|
/* all block aligned accesses */
|
||
|
debug("src %lx dst %lx end %lx pstart %lx pend %lx astart %lx aend %lx\n",
|
||
|
src, (ulong)dst, end, part_start, part_end, aligned_start, aligned_end);
|
||
|
if (part_start) {
|
||
|
part_len = mmc_block_size - part_start;
|
||
|
debug("ps src %lx dst %lx end %lx pstart %lx pend %lx astart %lx aend %lx\n",
|
||
|
src, (ulong)dst, end, part_start, part_end, aligned_start, aligned_end);
|
||
|
if ((mmc_block_read(mmc_buf, aligned_start, mmc_block_size)) < 0) {
|
||
|
return -1;
|
||
|
}
|
||
|
memcpy(dst, mmc_buf+part_start, part_len);
|
||
|
dst += part_len;
|
||
|
src += part_len;
|
||
|
}
|
||
|
debug("src %lx dst %lx end %lx pstart %lx pend %lx astart %lx aend %lx\n",
|
||
|
src, (ulong)dst, end, part_start, part_end, aligned_start, aligned_end);
|
||
|
for (; src < aligned_end; src += mmc_block_size, dst += mmc_block_size) {
|
||
|
debug("al src %lx dst %lx end %lx pstart %lx pend %lx astart %lx aend %lx\n",
|
||
|
src, (ulong)dst, end, part_start, part_end, aligned_start, aligned_end);
|
||
|
|
||
|
if ((mmc_block_read((uchar *)(dst), src, mmc_block_size)) < 0) {
|
||
|
return -1;
|
||
|
}
|
||
|
}
|
||
|
debug("src %lx dst %lx end %lx pstart %lx pend %lx astart %lx aend %lx\n",
|
||
|
src, (ulong)dst, end, part_start, part_end, aligned_start, aligned_end);
|
||
|
|
||
|
if (part_end && src < end) {
|
||
|
if ((mmc_block_read(mmc_buf, aligned_end, mmc_block_size)) < 0) {
|
||
|
return -1;
|
||
|
}
|
||
|
memcpy(dst, mmc_buf, part_end);
|
||
|
}
|
||
|
return 0;
|
||
|
|
||
|
}
|
||
|
|
||
|
int mmc_write(uchar *src, ulong dst, int size)
|
||
|
{
|
||
|
ulong end, part_start, part_end, part_len, aligned_start, aligned_end;
|
||
|
ulong mmc_block_size, mmc_block_address;
|
||
|
|
||
|
if (size == 0) {
|
||
|
return 0;
|
||
|
}
|
||
|
|
||
|
if (!mmc_ready) {
|
||
|
printf("MMC card is not ready\n");
|
||
|
return -1;
|
||
|
}
|
||
|
|
||
|
mmc_block_size = MMC_BLOCK_SIZE;
|
||
|
mmc_block_address = ~(mmc_block_size - 1);
|
||
|
|
||
|
dst -= CFG_MMC_BASE;
|
||
|
end = dst + size;
|
||
|
part_start = ~mmc_block_address & dst;
|
||
|
part_end = ~mmc_block_address & end;
|
||
|
aligned_start = mmc_block_address & dst;
|
||
|
aligned_end = mmc_block_address & end;
|
||
|
|
||
|
/* all block aligned accesses */
|
||
|
debug("src %lx dst %lx end %lx pstart %lx pend %lx astart %lx aend %lx\n",
|
||
|
src, (ulong)dst, end, part_start, part_end, aligned_start, aligned_end);
|
||
|
if (part_start) {
|
||
|
part_len = mmc_block_size - part_start;
|
||
|
debug("ps src %lx dst %lx end %lx pstart %lx pend %lx astart %lx aend %lx\n",
|
||
|
(ulong)src, dst, end, part_start, part_end, aligned_start, aligned_end);
|
||
|
if ((mmc_block_read(mmc_buf, aligned_start, mmc_block_size)) < 0) {
|
||
|
return -1;
|
||
|
}
|
||
|
memcpy(mmc_buf+part_start, src, part_len);
|
||
|
if ((mmc_block_write(aligned_start, mmc_buf, mmc_block_size)) < 0) {
|
||
|
return -1;
|
||
|
}
|
||
|
dst += part_len;
|
||
|
src += part_len;
|
||
|
}
|
||
|
debug("src %lx dst %lx end %lx pstart %lx pend %lx astart %lx aend %lx\n",
|
||
|
src, (ulong)dst, end, part_start, part_end, aligned_start, aligned_end);
|
||
|
for (; dst < aligned_end; src += mmc_block_size, dst += mmc_block_size) {
|
||
|
debug("al src %lx dst %lx end %lx pstart %lx pend %lx astart %lx aend %lx\n",
|
||
|
src, (ulong)dst, end, part_start, part_end, aligned_start, aligned_end);
|
||
|
if ((mmc_block_write(dst, (uchar *)src, mmc_block_size)) < 0) {
|
||
|
return -1;
|
||
|
}
|
||
|
}
|
||
|
debug("src %lx dst %lx end %lx pstart %lx pend %lx astart %lx aend %lx\n",
|
||
|
src, (ulong)dst, end, part_start, part_end, aligned_start, aligned_end);
|
||
|
if (part_end && dst < end) {
|
||
|
debug("pe src %lx dst %lx end %lx pstart %lx pend %lx astart %lx aend %lx\n",
|
||
|
src, (ulong)dst, end, part_start, part_end, aligned_start, aligned_end);
|
||
|
if ((mmc_block_read(mmc_buf, aligned_end, mmc_block_size)) < 0) {
|
||
|
return -1;
|
||
|
}
|
||
|
memcpy(mmc_buf, src, part_end);
|
||
|
if ((mmc_block_write(aligned_end, mmc_buf, mmc_block_size)) < 0) {
|
||
|
return -1;
|
||
|
}
|
||
|
}
|
||
|
return 0;
|
||
|
}
|
||
|
|
||
|
ulong mmc_bread(int dev_num, ulong blknr, ulong blkcnt, ulong *dst)
|
||
|
{
|
||
|
ulong src;
|
||
|
int mmc_block_size = MMC_BLOCK_SIZE;
|
||
|
|
||
|
src = blknr * mmc_block_size + CFG_MMC_BASE;
|
||
|
mmc_read(src, (uchar *)dst, blkcnt*mmc_block_size);
|
||
|
return blkcnt;
|
||
|
}
|
||
|
|
||
|
int mmc_select_card(void)
|
||
|
{
|
||
|
struct mmc_request request;
|
||
|
struct mmc_response_r1 r1;
|
||
|
int retval;
|
||
|
|
||
|
mmc_simple_cmd(&request, MMC_SELECT_CARD, mmcinfo.rca, RESPONSE_R1B);
|
||
|
retval = mmc_unpack_r1(&request, &r1, 0);
|
||
|
if (retval) {
|
||
|
return retval;
|
||
|
}
|
||
|
|
||
|
if (mmcinfo.sd) {
|
||
|
mmc_simple_cmd(&request, MMC_APP_CMD, mmcinfo.rca, RESPONSE_R1);
|
||
|
retval = mmc_unpack_r1(&request,&r1,0);
|
||
|
if (retval) {
|
||
|
return retval;
|
||
|
}
|
||
|
mmc_simple_cmd(&request, SET_BUS_WIDTH, 2, RESPONSE_R1);
|
||
|
retval = mmc_unpack_r1(&request,&r1,0);
|
||
|
if (retval) {
|
||
|
return retval;
|
||
|
}
|
||
|
}
|
||
|
return 0;
|
||
|
}
|
||
|
|
||
|
/*
|
||
|
* Configure card
|
||
|
*/
|
||
|
static void mmc_configure_card(void)
|
||
|
{
|
||
|
u32 rate;
|
||
|
|
||
|
/* Get card info */
|
||
|
if (sd2_0)
|
||
|
mmcinfo.block_num = (mmcinfo.csd.c_size + 1) << 10;
|
||
|
else
|
||
|
mmcinfo.block_num = (mmcinfo.csd.c_size + 1) * (1 << (mmcinfo.csd.c_size_mult + 2));
|
||
|
|
||
|
mmcinfo.block_len = 1 << mmcinfo.csd.read_bl_len;
|
||
|
|
||
|
/* Fix the clock rate */
|
||
|
rate = mmc_tran_speed(mmcinfo.csd.tran_speed);
|
||
|
if (rate < MMC_CLOCK_SLOW)
|
||
|
rate = MMC_CLOCK_SLOW;
|
||
|
if ((mmcinfo.sd == 0) && (rate > MMC_CLOCK_FAST))
|
||
|
rate = MMC_CLOCK_FAST;
|
||
|
if ((mmcinfo.sd) && (rate > SD_CLOCK_FAST))
|
||
|
rate = SD_CLOCK_FAST;
|
||
|
|
||
|
DEBUG(2,"mmc_configure_card: block_len=%d block_num=%d rate=%d\n", mmcinfo.block_len, mmcinfo.block_num, rate);
|
||
|
|
||
|
jz_mmc_set_clock(mmcinfo.sd, rate);
|
||
|
}
|
||
|
|
||
|
/*
|
||
|
* State machine routines to initialize card(s)
|
||
|
*/
|
||
|
|
||
|
/*
|
||
|
CIM_SINGLE_CARD_ACQ (frequency at 400 kHz)
|
||
|
--- Must enter from GO_IDLE_STATE ---
|
||
|
1. SD_SEND_OP_COND (SD Card) [CMD55] + [CMD41]
|
||
|
2. SEND_OP_COND (Full Range) [CMD1] {optional}
|
||
|
3. SEND_OP_COND (Set Range ) [CMD1]
|
||
|
If busy, delay and repeat step 2
|
||
|
4. ALL_SEND_CID [CMD2]
|
||
|
If timeout, set an error (no cards found)
|
||
|
5. SET_RELATIVE_ADDR [CMD3]
|
||
|
6. SEND_CSD [CMD9]
|
||
|
7. SET_DSR [CMD4] Only call this if (csd.dsr_imp).
|
||
|
8. Set clock frequency (check available in csd.tran_speed)
|
||
|
*/
|
||
|
|
||
|
#define MMC_INIT_DOING 0
|
||
|
#define MMC_INIT_PASSED 1
|
||
|
#define MMC_INIT_FAILED 2
|
||
|
|
||
|
static int mmc_init_card_state(struct mmc_request *request)
|
||
|
{
|
||
|
struct mmc_response_r1 r1;
|
||
|
struct mmc_response_r3 r3;
|
||
|
int retval;
|
||
|
int ocr = 0x40300000;
|
||
|
int limit_41 = 0;
|
||
|
|
||
|
DEBUG(2,"mmc_init_card_state\n");
|
||
|
|
||
|
switch (request->cmd) {
|
||
|
case MMC_GO_IDLE_STATE: /* No response to parse */
|
||
|
if (mmcinfo.sd)
|
||
|
mmc_simple_cmd(request, 8, 0x1aa, RESPONSE_R1);
|
||
|
else
|
||
|
mmc_simple_cmd(request, MMC_SEND_OP_COND, MMC_OCR_ARG, RESPONSE_R3);
|
||
|
break;
|
||
|
|
||
|
case 8:
|
||
|
retval = mmc_unpack_r1(request,&r1,mmcinfo.state);
|
||
|
mmc_simple_cmd(request, MMC_APP_CMD, 0, RESPONSE_R1);
|
||
|
break;
|
||
|
|
||
|
case MMC_APP_CMD:
|
||
|
retval = mmc_unpack_r1(request,&r1,mmcinfo.state);
|
||
|
if (retval & (limit_41 < 100)) {
|
||
|
DEBUG(0, "mmc_init_card_state: unable to MMC_APP_CMD error=%d (%s)\n",
|
||
|
retval, mmc_result_to_string(retval));
|
||
|
limit_41++;
|
||
|
mmc_simple_cmd(request, SD_SEND_OP_COND, ocr, RESPONSE_R3);
|
||
|
} else if (limit_41 < 100) {
|
||
|
limit_41++;
|
||
|
mmc_simple_cmd(request, SD_SEND_OP_COND, ocr, RESPONSE_R3);
|
||
|
} else{
|
||
|
/* reset the card to idle*/
|
||
|
mmc_simple_cmd(request, MMC_GO_IDLE_STATE, 0, RESPONSE_NONE);
|
||
|
mmcinfo.sd = 0;
|
||
|
}
|
||
|
break;
|
||
|
|
||
|
case SD_SEND_OP_COND:
|
||
|
retval = mmc_unpack_r3(request, &r3);
|
||
|
if (retval) {
|
||
|
/* Try MMC card */
|
||
|
mmc_simple_cmd(request, MMC_SEND_OP_COND, MMC_OCR_ARG, RESPONSE_R3);
|
||
|
break;
|
||
|
}
|
||
|
|
||
|
DEBUG(2,"mmc_init_card_state: read ocr value = 0x%08x\n", r3.ocr);
|
||
|
|
||
|
if(!(r3.ocr & MMC_CARD_BUSY || ocr == 0)){
|
||
|
udelay(10000);
|
||
|
mmc_simple_cmd(request, MMC_APP_CMD, 0, RESPONSE_R1);
|
||
|
}
|
||
|
else {
|
||
|
/* Set the data bus width to 4 bits */
|
||
|
mmcinfo.sd = 1; /* SD Card ready */
|
||
|
mmcinfo.state = CARD_STATE_READY;
|
||
|
mmc_simple_cmd(request, MMC_ALL_SEND_CID, 0, RESPONSE_R2_CID);
|
||
|
}
|
||
|
break;
|
||
|
|
||
|
case MMC_SEND_OP_COND:
|
||
|
retval = mmc_unpack_r3(request, &r3);
|
||
|
if (retval) {
|
||
|
DEBUG(0,"mmc_init_card_state: failed SEND_OP_COND error=%d (%s)\n",
|
||
|
retval, mmc_result_to_string(retval));
|
||
|
return MMC_INIT_FAILED;
|
||
|
}
|
||
|
|
||
|
DEBUG(2,"mmc_init_card_state: read ocr value = 0x%08x\n", r3.ocr);
|
||
|
if (!(r3.ocr & MMC_CARD_BUSY)) {
|
||
|
mmc_simple_cmd(request, MMC_SEND_OP_COND, MMC_OCR_ARG, RESPONSE_R3);
|
||
|
}
|
||
|
else {
|
||
|
mmcinfo.sd = 0; /* MMC Card ready */
|
||
|
mmcinfo.state = CARD_STATE_READY;
|
||
|
mmc_simple_cmd(request, MMC_ALL_SEND_CID, 0, RESPONSE_R2_CID);
|
||
|
}
|
||
|
break;
|
||
|
|
||
|
case MMC_ALL_SEND_CID:
|
||
|
retval = mmc_unpack_cid( request, &mmcinfo.cid );
|
||
|
mmc_dev.if_type = IF_TYPE_MMC;
|
||
|
mmc_dev.part_type = PART_TYPE_DOS;
|
||
|
mmc_dev.dev = 0;
|
||
|
mmc_dev.lun = 0;
|
||
|
mmc_dev.type = 0;
|
||
|
/* FIXME fill in the correct size (is set to 32MByte) */
|
||
|
mmc_dev.blksz = 512;
|
||
|
mmc_dev.lba = 0x10000;
|
||
|
mmc_dev.removable = 0;
|
||
|
|
||
|
/*FIXME:ignore CRC error for CMD2/CMD9/CMD10 */
|
||
|
if ( retval && (retval != MMC_ERROR_CRC)) {
|
||
|
DEBUG(0,"mmc_init_card_state: unable to ALL_SEND_CID error=%d (%s)\n",
|
||
|
retval, mmc_result_to_string(retval));
|
||
|
return MMC_INIT_FAILED;
|
||
|
}
|
||
|
mmcinfo.state = CARD_STATE_IDENT;
|
||
|
if(mmcinfo.sd)
|
||
|
mmc_simple_cmd(request, MMC_SET_RELATIVE_ADDR, 0, RESPONSE_R6);
|
||
|
else
|
||
|
mmc_simple_cmd(request, MMC_SET_RELATIVE_ADDR, ID_TO_RCA(mmcinfo.id) << 16, RESPONSE_R1);
|
||
|
break;
|
||
|
|
||
|
case MMC_SET_RELATIVE_ADDR:
|
||
|
if (mmcinfo.sd) {
|
||
|
retval = mmc_unpack_r6(request, &r1, mmcinfo.state, &mmcinfo.rca);
|
||
|
mmcinfo.rca = mmcinfo.rca << 16;
|
||
|
DEBUG(2, "mmc_init_card_state: Get RCA from SD: 0x%04x Status: %x\n", mmcinfo.rca, r1.status);
|
||
|
} else {
|
||
|
retval = mmc_unpack_r1(request,&r1,mmcinfo.state);
|
||
|
mmcinfo.rca = ID_TO_RCA(mmcinfo.id) << 16;
|
||
|
}
|
||
|
if (retval) {
|
||
|
DEBUG(0, "mmc_init_card_state: unable to SET_RELATIVE_ADDR error=%d (%s)\n",
|
||
|
retval, mmc_result_to_string(retval));
|
||
|
return MMC_INIT_FAILED;
|
||
|
}
|
||
|
|
||
|
mmcinfo.state = CARD_STATE_STBY;
|
||
|
mmc_simple_cmd(request, MMC_SEND_CSD, mmcinfo.rca, RESPONSE_R2_CSD);
|
||
|
|
||
|
break;
|
||
|
|
||
|
case MMC_SEND_CSD:
|
||
|
retval = mmc_unpack_csd(request, &mmcinfo.csd);
|
||
|
mmc_csd_t *csd = (mmc_csd_t *)retval;
|
||
|
memcpy(&mmc_csd, csd, sizeof(csd));
|
||
|
mmc_ready = 1;
|
||
|
|
||
|
printf("MMC card is ready\n");
|
||
|
/* FIXME add verbose printout for csd */
|
||
|
|
||
|
/*FIXME:ignore CRC error for CMD2/CMD9/CMD10 */
|
||
|
if (retval && (retval != MMC_ERROR_CRC)) {
|
||
|
DEBUG(0, "mmc_init_card_state: unable to SEND_CSD error=%d (%s)\n",
|
||
|
retval, mmc_result_to_string(retval));
|
||
|
return MMC_INIT_FAILED;
|
||
|
}
|
||
|
if (mmcinfo.csd.dsr_imp) {
|
||
|
DEBUG(0, "mmc_init_card_state: driver doesn't support setting DSR\n");
|
||
|
}
|
||
|
mmc_configure_card();
|
||
|
return MMC_INIT_PASSED;
|
||
|
|
||
|
default:
|
||
|
DEBUG(0, "mmc_init_card_state: error! Illegal last cmd %d\n", request->cmd);
|
||
|
return MMC_INIT_FAILED;
|
||
|
}
|
||
|
|
||
|
return MMC_INIT_DOING;
|
||
|
}
|
||
|
|
||
|
int mmc_init_card(void)
|
||
|
{
|
||
|
struct mmc_request request;
|
||
|
int retval;
|
||
|
|
||
|
mmc_simple_cmd(&request, MMC_CIM_RESET, 0, RESPONSE_NONE); /* reset card */
|
||
|
mmc_simple_cmd(&request, MMC_GO_IDLE_STATE, 0, RESPONSE_NONE);
|
||
|
mmcinfo.sd = 1; /* assuming a SD card */
|
||
|
|
||
|
while ((retval = mmc_init_card_state(&request)) == MMC_INIT_DOING)
|
||
|
;
|
||
|
|
||
|
if (retval == MMC_INIT_PASSED)
|
||
|
return MMC_NO_ERROR;
|
||
|
else
|
||
|
return MMC_NO_RESPONSE;
|
||
|
}
|
||
|
|
||
|
int mmc_legacy_init(int verbose)
|
||
|
{
|
||
|
if (!__msc_card_detected())
|
||
|
return 1;
|
||
|
|
||
|
printf("MMC card found\n");
|
||
|
|
||
|
/* Step-1: init GPIO */
|
||
|
__gpio_as_msc();
|
||
|
|
||
|
__msc_init_io();
|
||
|
|
||
|
/* Step-2: turn on power of card */
|
||
|
__msc_enable_power();
|
||
|
|
||
|
/* Step-3: Reset MSC Controller. */
|
||
|
__msc_reset();
|
||
|
|
||
|
/* Step-3: mask all IRQs. */
|
||
|
MMC_IRQ_MASK();
|
||
|
|
||
|
/* Step-4: stop MMC/SD clock */
|
||
|
jz_mmc_stop_clock();
|
||
|
mmc_init_card();
|
||
|
mmc_select_card();
|
||
|
|
||
|
mmc_dev.block_read = mmc_bread;
|
||
|
fat_register_device(&mmc_dev,1); /* partitions start counting with 1 */
|
||
|
|
||
|
return 0;
|
||
|
}
|
||
|
|
||
|
int mmc_ident(block_dev_desc_t *dev)
|
||
|
{
|
||
|
return 0;
|
||
|
}
|
||
|
|
||
|
int mmc2info(ulong addr)
|
||
|
{
|
||
|
/* FIXME hard codes to 32 MB device */
|
||
|
if (addr >= CFG_MMC_BASE && addr < CFG_MMC_BASE + 0x02000000) {
|
||
|
return 1;
|
||
|
}
|
||
|
return 0;
|
||
|
}
|
||
|
/*
|
||
|
* Debugging functions
|
||
|
*/
|
||
|
|
||
|
static char * mmc_result_strings[] = {
|
||
|
"NO_RESPONSE",
|
||
|
"NO_ERROR",
|
||
|
"ERROR_OUT_OF_RANGE",
|
||
|
"ERROR_ADDRESS",
|
||
|
"ERROR_BLOCK_LEN",
|
||
|
"ERROR_ERASE_SEQ",
|
||
|
"ERROR_ERASE_PARAM",
|
||
|
"ERROR_WP_VIOLATION",
|
||
|
"ERROR_CARD_IS_LOCKED",
|
||
|
"ERROR_LOCK_UNLOCK_FAILED",
|
||
|
"ERROR_COM_CRC",
|
||
|
"ERROR_ILLEGAL_COMMAND",
|
||
|
"ERROR_CARD_ECC_FAILED",
|
||
|
"ERROR_CC",
|
||
|
"ERROR_GENERAL",
|
||
|
"ERROR_UNDERRUN",
|
||
|
"ERROR_OVERRUN",
|
||
|
"ERROR_CID_CSD_OVERWRITE",
|
||
|
"ERROR_STATE_MISMATCH",
|
||
|
"ERROR_HEADER_MISMATCH",
|
||
|
"ERROR_TIMEOUT",
|
||
|
"ERROR_CRC",
|
||
|
"ERROR_DRIVER_FAILURE",
|
||
|
};
|
||
|
|
||
|
char * mmc_result_to_string(int i)
|
||
|
{
|
||
|
return mmc_result_strings[i+1];
|
||
|
}
|
||
|
|
||
|
static char * card_state_strings[] = {
|
||
|
"empty",
|
||
|
"idle",
|
||
|
"ready",
|
||
|
"ident",
|
||
|
"stby",
|
||
|
"tran",
|
||
|
"data",
|
||
|
"rcv",
|
||
|
"prg",
|
||
|
"dis",
|
||
|
};
|
||
|
|
||
|
static inline char * card_state_to_string(int i)
|
||
|
{
|
||
|
return card_state_strings[i+1];
|
||
|
}
|
||
|
|
||
|
/*
|
||
|
* Utility functions
|
||
|
*/
|
||
|
|
||
|
#define PARSE_U32(_buf,_index) \
|
||
|
(((u32)_buf[_index]) << 24) | (((u32)_buf[_index+1]) << 16) | \
|
||
|
(((u32)_buf[_index+2]) << 8) | ((u32)_buf[_index+3]);
|
||
|
|
||
|
#define PARSE_U16(_buf,_index) \
|
||
|
(((u16)_buf[_index]) << 8) | ((u16)_buf[_index+1]);
|
||
|
|
||
|
int mmc_unpack_csd(struct mmc_request *request, struct mmc_csd *csd)
|
||
|
{
|
||
|
u8 *buf = request->response;
|
||
|
int num = 0;
|
||
|
|
||
|
if (request->result)
|
||
|
return request->result;
|
||
|
|
||
|
csd->csd_structure = (buf[1] & 0xc0) >> 6;
|
||
|
if (csd->csd_structure)
|
||
|
sd2_0 = 1;
|
||
|
else
|
||
|
sd2_0 = 0;
|
||
|
|
||
|
switch (csd->csd_structure) {
|
||
|
case 0 :
|
||
|
csd->taac = buf[2];
|
||
|
csd->nsac = buf[3];
|
||
|
csd->tran_speed = buf[4];
|
||
|
csd->ccc = (((u16)buf[5]) << 4) | ((buf[6] & 0xf0) >> 4);
|
||
|
csd->read_bl_len = buf[6] & 0x0f;
|
||
|
/* for support 2GB card*/
|
||
|
if (csd->read_bl_len >= 10)
|
||
|
{
|
||
|
num = csd->read_bl_len - 9;
|
||
|
csd->read_bl_len = 9;
|
||
|
}
|
||
|
|
||
|
csd->read_bl_partial = (buf[7] & 0x80) ? 1 : 0;
|
||
|
csd->write_blk_misalign = (buf[7] & 0x40) ? 1 : 0;
|
||
|
csd->read_blk_misalign = (buf[7] & 0x20) ? 1 : 0;
|
||
|
csd->dsr_imp = (buf[7] & 0x10) ? 1 : 0;
|
||
|
csd->c_size = ((((u16)buf[7]) & 0x03) << 10) | (((u16)buf[8]) << 2) | (((u16)buf[9]) & 0xc0) >> 6;
|
||
|
|
||
|
if (num)
|
||
|
csd->c_size = csd->c_size << num;
|
||
|
|
||
|
|
||
|
csd->vdd_r_curr_min = (buf[9] & 0x38) >> 3;
|
||
|
csd->vdd_r_curr_max = buf[9] & 0x07;
|
||
|
csd->vdd_w_curr_min = (buf[10] & 0xe0) >> 5;
|
||
|
csd->vdd_w_curr_max = (buf[10] & 0x1c) >> 2;
|
||
|
csd->c_size_mult = ((buf[10] & 0x03) << 1) | ((buf[11] & 0x80) >> 7);
|
||
|
switch (csd->csd_structure) {
|
||
|
case CSD_STRUCT_VER_1_0:
|
||
|
case CSD_STRUCT_VER_1_1:
|
||
|
csd->erase.v22.sector_size = (buf[11] & 0x7c) >> 2;
|
||
|
csd->erase.v22.erase_grp_size = ((buf[11] & 0x03) << 3) | ((buf[12] & 0xe0) >> 5);
|
||
|
|
||
|
break;
|
||
|
case CSD_STRUCT_VER_1_2:
|
||
|
default:
|
||
|
csd->erase.v31.erase_grp_size = (buf[11] & 0x7c) >> 2;
|
||
|
csd->erase.v31.erase_grp_mult = ((buf[11] & 0x03) << 3) | ((buf[12] & 0xe0) >> 5);
|
||
|
break;
|
||
|
}
|
||
|
csd->wp_grp_size = buf[12] & 0x1f;
|
||
|
csd->wp_grp_enable = (buf[13] & 0x80) ? 1 : 0;
|
||
|
csd->default_ecc = (buf[13] & 0x60) >> 5;
|
||
|
csd->r2w_factor = (buf[13] & 0x1c) >> 2;
|
||
|
csd->write_bl_len = ((buf[13] & 0x03) << 2) | ((buf[14] & 0xc0) >> 6);
|
||
|
if (csd->write_bl_len >= 10)
|
||
|
csd->write_bl_len = 9;
|
||
|
|
||
|
csd->write_bl_partial = (buf[14] & 0x20) ? 1 : 0;
|
||
|
csd->file_format_grp = (buf[15] & 0x80) ? 1 : 0;
|
||
|
csd->copy = (buf[15] & 0x40) ? 1 : 0;
|
||
|
csd->perm_write_protect = (buf[15] & 0x20) ? 1 : 0;
|
||
|
csd->tmp_write_protect = (buf[15] & 0x10) ? 1 : 0;
|
||
|
csd->file_format = (buf[15] & 0x0c) >> 2;
|
||
|
csd->ecc = buf[15] & 0x03;
|
||
|
|
||
|
DEBUG(2," csd_structure=%d spec_vers=%d taac=%02x nsac=%02x tran_speed=%02x\n"
|
||
|
" ccc=%04x read_bl_len=%d read_bl_partial=%d write_blk_misalign=%d\n"
|
||
|
" read_blk_misalign=%d dsr_imp=%d c_size=%d vdd_r_curr_min=%d\n"
|
||
|
" vdd_r_curr_max=%d vdd_w_curr_min=%d vdd_w_curr_max=%d c_size_mult=%d\n"
|
||
|
" wp_grp_size=%d wp_grp_enable=%d default_ecc=%d r2w_factor=%d\n"
|
||
|
" write_bl_len=%d write_bl_partial=%d file_format_grp=%d copy=%d\n"
|
||
|
" perm_write_protect=%d tmp_write_protect=%d file_format=%d ecc=%d\n",
|
||
|
csd->csd_structure, csd->spec_vers,
|
||
|
csd->taac, csd->nsac, csd->tran_speed,
|
||
|
csd->ccc, csd->read_bl_len,
|
||
|
csd->read_bl_partial, csd->write_blk_misalign,
|
||
|
csd->read_blk_misalign, csd->dsr_imp,
|
||
|
csd->c_size, csd->vdd_r_curr_min,
|
||
|
csd->vdd_r_curr_max, csd->vdd_w_curr_min,
|
||
|
csd->vdd_w_curr_max, csd->c_size_mult,
|
||
|
csd->wp_grp_size, csd->wp_grp_enable,
|
||
|
csd->default_ecc, csd->r2w_factor,
|
||
|
csd->write_bl_len, csd->write_bl_partial,
|
||
|
csd->file_format_grp, csd->copy,
|
||
|
csd->perm_write_protect, csd->tmp_write_protect,
|
||
|
csd->file_format, csd->ecc);
|
||
|
switch (csd->csd_structure) {
|
||
|
case CSD_STRUCT_VER_1_0:
|
||
|
case CSD_STRUCT_VER_1_1:
|
||
|
DEBUG(2," V22 sector_size=%d erase_grp_size=%d\n",
|
||
|
csd->erase.v22.sector_size,
|
||
|
csd->erase.v22.erase_grp_size);
|
||
|
break;
|
||
|
case CSD_STRUCT_VER_1_2:
|
||
|
default:
|
||
|
DEBUG(2," V31 erase_grp_size=%d erase_grp_mult=%d\n",
|
||
|
csd->erase.v31.erase_grp_size,
|
||
|
csd->erase.v31.erase_grp_mult);
|
||
|
break;
|
||
|
|
||
|
}
|
||
|
break;
|
||
|
|
||
|
case 1 :
|
||
|
csd->taac = 0;
|
||
|
csd->nsac = 0;
|
||
|
csd->tran_speed = buf[4];
|
||
|
csd->ccc = (((u16)buf[5]) << 4) | ((buf[6] & 0xf0) >> 4);
|
||
|
|
||
|
csd->read_bl_len = 9;
|
||
|
csd->read_bl_partial = 0;
|
||
|
csd->write_blk_misalign = 0;
|
||
|
csd->read_blk_misalign = 0;
|
||
|
csd->dsr_imp = (buf[7] & 0x10) ? 1 : 0;
|
||
|
csd->c_size = ((((u16)buf[8]) & 0x3f) << 16) | (((u16)buf[9]) << 8) | ((u16)buf[10]) ;
|
||
|
switch (csd->csd_structure) {
|
||
|
case CSD_STRUCT_VER_1_0:
|
||
|
case CSD_STRUCT_VER_1_1:
|
||
|
csd->erase.v22.sector_size = 0x7f;
|
||
|
csd->erase.v22.erase_grp_size = 0;
|
||
|
break;
|
||
|
case CSD_STRUCT_VER_1_2:
|
||
|
default:
|
||
|
csd->erase.v31.erase_grp_size = 0x7f;
|
||
|
csd->erase.v31.erase_grp_mult = 0;
|
||
|
break;
|
||
|
}
|
||
|
csd->wp_grp_size = 0;
|
||
|
csd->wp_grp_enable = 0;
|
||
|
csd->default_ecc = (buf[13] & 0x60) >> 5;
|
||
|
csd->r2w_factor = 4;/* Unused */
|
||
|
csd->write_bl_len = 9;
|
||
|
|
||
|
csd->write_bl_partial = 0;
|
||
|
csd->file_format_grp = 0;
|
||
|
csd->copy = (buf[15] & 0x40) ? 1 : 0;
|
||
|
csd->perm_write_protect = (buf[15] & 0x20) ? 1 : 0;
|
||
|
csd->tmp_write_protect = (buf[15] & 0x10) ? 1 : 0;
|
||
|
csd->file_format = 0;
|
||
|
csd->ecc = buf[15] & 0x03;
|
||
|
|
||
|
DEBUG(2," csd_structure=%d spec_vers=%d taac=%02x nsac=%02x tran_speed=%02x\n"
|
||
|
" ccc=%04x read_bl_len=%d read_bl_partial=%d write_blk_misalign=%d\n"
|
||
|
" read_blk_misalign=%d dsr_imp=%d c_size=%d vdd_r_curr_min=%d\n"
|
||
|
" vdd_r_curr_max=%d vdd_w_curr_min=%d vdd_w_curr_max=%d c_size_mult=%d\n"
|
||
|
" wp_grp_size=%d wp_grp_enable=%d default_ecc=%d r2w_factor=%d\n"
|
||
|
" write_bl_len=%d write_bl_partial=%d file_format_grp=%d copy=%d\n"
|
||
|
" perm_write_protect=%d tmp_write_protect=%d file_format=%d ecc=%d\n",
|
||
|
csd->csd_structure, csd->spec_vers,
|
||
|
csd->taac, csd->nsac, csd->tran_speed,
|
||
|
csd->ccc, csd->read_bl_len,
|
||
|
csd->read_bl_partial, csd->write_blk_misalign,
|
||
|
csd->read_blk_misalign, csd->dsr_imp,
|
||
|
csd->c_size, csd->vdd_r_curr_min,
|
||
|
csd->vdd_r_curr_max, csd->vdd_w_curr_min,
|
||
|
csd->vdd_w_curr_max, csd->c_size_mult,
|
||
|
csd->wp_grp_size, csd->wp_grp_enable,
|
||
|
csd->default_ecc, csd->r2w_factor,
|
||
|
csd->write_bl_len, csd->write_bl_partial,
|
||
|
csd->file_format_grp, csd->copy,
|
||
|
csd->perm_write_protect, csd->tmp_write_protect,
|
||
|
csd->file_format, csd->ecc);
|
||
|
switch (csd->csd_structure) {
|
||
|
case CSD_STRUCT_VER_1_0:
|
||
|
case CSD_STRUCT_VER_1_1:
|
||
|
DEBUG(2," V22 sector_size=%d erase_grp_size=%d\n",
|
||
|
csd->erase.v22.sector_size,
|
||
|
csd->erase.v22.erase_grp_size);
|
||
|
break;
|
||
|
case CSD_STRUCT_VER_1_2:
|
||
|
default:
|
||
|
DEBUG(2," V31 erase_grp_size=%d erase_grp_mult=%d\n",
|
||
|
csd->erase.v31.erase_grp_size,
|
||
|
csd->erase.v31.erase_grp_mult);
|
||
|
break;
|
||
|
}
|
||
|
}
|
||
|
|
||
|
if (buf[0] != 0x3f) return MMC_ERROR_HEADER_MISMATCH;
|
||
|
|
||
|
return 0;
|
||
|
}
|
||
|
|
||
|
int mmc_unpack_r1(struct mmc_request *request, struct mmc_response_r1 *r1, enum card_state state)
|
||
|
{
|
||
|
u8 *buf = request->response;
|
||
|
|
||
|
if (request->result) return request->result;
|
||
|
|
||
|
r1->cmd = buf[0];
|
||
|
r1->status = PARSE_U32(buf,1);
|
||
|
|
||
|
DEBUG(2, "mmc_unpack_r1: cmd=%d status=%08x\n", r1->cmd, r1->status);
|
||
|
|
||
|
if (R1_STATUS(r1->status)) {
|
||
|
if (r1->status & R1_OUT_OF_RANGE) return MMC_ERROR_OUT_OF_RANGE;
|
||
|
if (r1->status & R1_ADDRESS_ERROR) return MMC_ERROR_ADDRESS;
|
||
|
if (r1->status & R1_BLOCK_LEN_ERROR) return MMC_ERROR_BLOCK_LEN;
|
||
|
if (r1->status & R1_ERASE_SEQ_ERROR) return MMC_ERROR_ERASE_SEQ;
|
||
|
if (r1->status & R1_ERASE_PARAM) return MMC_ERROR_ERASE_PARAM;
|
||
|
if (r1->status & R1_WP_VIOLATION) return MMC_ERROR_WP_VIOLATION;
|
||
|
/*if (r1->status & R1_CARD_IS_LOCKED) return MMC_ERROR_CARD_IS_LOCKED; */
|
||
|
if (r1->status & R1_LOCK_UNLOCK_FAILED) return MMC_ERROR_LOCK_UNLOCK_FAILED;
|
||
|
if (r1->status & R1_COM_CRC_ERROR) return MMC_ERROR_COM_CRC;
|
||
|
if (r1->status & R1_ILLEGAL_COMMAND) return MMC_ERROR_ILLEGAL_COMMAND;
|
||
|
if (r1->status & R1_CARD_ECC_FAILED) return MMC_ERROR_CARD_ECC_FAILED;
|
||
|
if (r1->status & R1_CC_ERROR) return MMC_ERROR_CC;
|
||
|
if (r1->status & R1_ERROR) return MMC_ERROR_GENERAL;
|
||
|
if (r1->status & R1_UNDERRUN) return MMC_ERROR_UNDERRUN;
|
||
|
if (r1->status & R1_OVERRUN) return MMC_ERROR_OVERRUN;
|
||
|
if (r1->status & R1_CID_CSD_OVERWRITE) return MMC_ERROR_CID_CSD_OVERWRITE;
|
||
|
}
|
||
|
|
||
|
if (buf[0] != request->cmd) return MMC_ERROR_HEADER_MISMATCH;
|
||
|
|
||
|
/* This should be last - it's the least dangerous error */
|
||
|
|
||
|
return 0;
|
||
|
}
|
||
|
|
||
|
int mmc_unpack_scr(struct mmc_request *request, struct mmc_response_r1 *r1, enum card_state state, u32 *scr)
|
||
|
{
|
||
|
u8 *buf = request->response;
|
||
|
if (request->result) return request->result;
|
||
|
|
||
|
*scr = PARSE_U32(buf, 5); /* Save SCR returned by the SD Card */
|
||
|
return mmc_unpack_r1(request, r1, state);
|
||
|
|
||
|
}
|
||
|
|
||
|
int mmc_unpack_r6(struct mmc_request *request, struct mmc_response_r1 *r1, enum card_state state, int *rca)
|
||
|
{
|
||
|
u8 *buf = request->response;
|
||
|
|
||
|
if (request->result) return request->result;
|
||
|
|
||
|
*rca = PARSE_U16(buf,1); /* Save RCA returned by the SD Card */
|
||
|
|
||
|
*(buf+1) = 0;
|
||
|
*(buf+2) = 0;
|
||
|
|
||
|
return mmc_unpack_r1(request, r1, state);
|
||
|
}
|
||
|
|
||
|
int mmc_unpack_cid(struct mmc_request *request, struct mmc_cid *cid)
|
||
|
{
|
||
|
u8 *buf = request->response;
|
||
|
int i;
|
||
|
|
||
|
if (request->result) return request->result;
|
||
|
|
||
|
cid->mid = buf[1];
|
||
|
cid->oid = PARSE_U16(buf,2);
|
||
|
for (i = 0 ; i < 6 ; i++)
|
||
|
cid->pnm[i] = buf[4+i];
|
||
|
cid->pnm[6] = 0;
|
||
|
cid->prv = buf[10];
|
||
|
cid->psn = PARSE_U32(buf,11);
|
||
|
cid->mdt = buf[15];
|
||
|
|
||
|
DEBUG(2,"mmc_unpack_cid: mid=%d oid=%d pnm=%s prv=%d.%d psn=%08x mdt=%d/%d\n",
|
||
|
cid->mid, cid->oid, cid->pnm,
|
||
|
(cid->prv>>4), (cid->prv&0xf),
|
||
|
cid->psn, (cid->mdt>>4), (cid->mdt&0xf)+1997);
|
||
|
|
||
|
if (buf[0] != 0x3f) return MMC_ERROR_HEADER_MISMATCH;
|
||
|
return 0;
|
||
|
}
|
||
|
|
||
|
int mmc_unpack_r3(struct mmc_request *request, struct mmc_response_r3 *r3)
|
||
|
{
|
||
|
u8 *buf = request->response;
|
||
|
|
||
|
if (request->result) return request->result;
|
||
|
|
||
|
r3->ocr = PARSE_U32(buf,1);
|
||
|
DEBUG(2,"mmc_unpack_r3: ocr=%08x\n", r3->ocr);
|
||
|
|
||
|
if (buf[0] != 0x3f) return MMC_ERROR_HEADER_MISMATCH;
|
||
|
return 0;
|
||
|
}
|
||
|
|
||
|
#define KBPS 1
|
||
|
#define MBPS 1000
|
||
|
|
||
|
static u32 ts_exp[] = { 100*KBPS, 1*MBPS, 10*MBPS, 100*MBPS, 0, 0, 0, 0 };
|
||
|
static u32 ts_mul[] = { 0, 1000, 1200, 1300, 1500, 2000, 2500, 3000,
|
||
|
3500, 4000, 4500, 5000, 5500, 6000, 7000, 8000 };
|
||
|
|
||
|
u32 mmc_tran_speed(u8 ts)
|
||
|
{
|
||
|
u32 rate = ts_exp[(ts & 0x7)] * ts_mul[(ts & 0x78) >> 3];
|
||
|
|
||
|
if (rate <= 0) {
|
||
|
DEBUG(0, "mmc_tran_speed: error - unrecognized speed 0x%02x\n", ts);
|
||
|
return 1;
|
||
|
}
|
||
|
|
||
|
return rate;
|
||
|
}
|
||
|
|
||
|
void mmc_send_cmd(struct mmc_request *request, int cmd, u32 arg,
|
||
|
u16 nob, u16 block_len, enum mmc_rsp_t rtype, u8 *buffer)
|
||
|
{
|
||
|
request->cmd = cmd;
|
||
|
request->arg = arg;
|
||
|
request->rtype = rtype;
|
||
|
request->nob = nob;
|
||
|
request->block_len = block_len;
|
||
|
request->buffer = buffer;
|
||
|
request->cnt = nob * block_len;
|
||
|
|
||
|
jz_mmc_exec_cmd(request);
|
||
|
}
|
||
|
|
||
|
#endif /* CONFIG_MMC */
|
||
|
#endif /* CONFIG_JZ4740 */
|