mirror of https://github.com/hak5/openwrt-owl.git
90 lines
3.0 KiB
Diff
90 lines
3.0 KiB
Diff
|
--- a/drivers/tty/serial/8250/Kconfig
|
||
|
|
+++ b/drivers/tty/serial/8250/Kconfig
|
||
|
|
@@ -249,6 +249,14 @@ config SERIAL_8250_ACORN
|
||
|
|
system, say Y to this option. The driver can handle 1, 2, or 3 port
|
||
|
|
cards. If unsure, say N.
|
||
|
|
|
||
|
|
+config SERIAL_8250_RT288X
|
||
|
|
+ bool "Ralink RT288x/RT305x/RT3662/RT3883 serial port support"
|
||
|
|
+ depends on SERIAL_8250 != n && (SOC_RT288X || SOC_RT305X || SOC_RT3883)
|
||
|
|
+ help
|
||
|
|
+ If you have a Ralink RT288x/RT305x SoC based board and want to use the
|
||
|
|
+ serial port, say Y to this option. The driver can handle up to 2 serial
|
||
|
|
+ ports. If unsure, say N.
|
||
|
|
+
|
||
|
|
config SERIAL_8250_RM9K
|
||
|
|
bool "Support for MIPS RM9xxx integrated serial port"
|
||
|
|
depends on SERIAL_8250 != n && SERIAL_RM9000
|
||
|
|
--- a/include/linux/serial_core.h
|
||
|
|
+++ b/include/linux/serial_core.h
|
||
|
|
@@ -132,7 +132,7 @@ struct uart_port {
|
||
|
|
#define UPIO_HUB6 (1)
|
||
|
|
#define UPIO_MEM (2)
|
||
|
|
#define UPIO_MEM32 (3)
|
||
|
|
-#define UPIO_AU (4) /* Au1x00 type IO */
|
||
|
|
+#define UPIO_AU (4) /* Au1x00 and RT288x type IO */
|
||
|
|
#define UPIO_TSI (5) /* Tsi108/109 type IO */
|
||
|
|
#define UPIO_RM9000 (6) /* RM9000 type IO */
|
||
|
|
|
||
|
|
--- a/drivers/tty/serial/8250/8250.c
|
||
|
|
+++ b/drivers/tty/serial/8250/8250.c
|
||
|
|
@@ -308,9 +308,9 @@ static void default_serial_dl_write(stru
|
||
|
|
serial_out(up, UART_DLM, value >> 8 & 0xff);
|
||
|
|
}
|
||
|
|
|
||
|
|
-#ifdef CONFIG_MIPS_ALCHEMY
|
||
|
|
+#if defined CONFIG_MIPS_ALCHEMY || defined (CONFIG_SERIAL_8250_RT288X)
|
||
|
|
|
||
|
|
-/* Au1x00 UART hardware has a weird register layout */
|
||
|
|
+/* Au1x00 and RT288x UART hardware has a weird register layout */
|
||
|
|
static const u8 au_io_in_map[] = {
|
||
|
|
[UART_RX] = 0,
|
||
|
|
[UART_IER] = 2,
|
||
|
|
@@ -489,7 +489,7 @@ static void set_io_from_upio(struct uart
|
||
|
|
break;
|
||
|
|
#endif
|
||
|
|
|
||
|
|
-#ifdef CONFIG_MIPS_ALCHEMY
|
||
|
|
+#if defined(CONFIG_MIPS_ALCHEMY) || defined(CONFIG_SERIAL_8250_RT288X)
|
||
|
|
case UPIO_AU:
|
||
|
|
p->serial_in = au_serial_in;
|
||
|
|
p->serial_out = au_serial_out;
|
||
|
|
@@ -701,22 +701,19 @@ static int size_fifo(struct uart_8250_po
|
||
|
|
*/
|
||
|
|
static unsigned int autoconfig_read_divisor_id(struct uart_8250_port *p)
|
||
|
|
{
|
||
|
|
- unsigned char old_dll, old_dlm, old_lcr;
|
||
|
|
+ unsigned char old_lcr;
|
||
|
|
+ unsigned int old_dl;
|
||
|
|
unsigned int id;
|
||
|
|
|
||
|
|
old_lcr = serial_in(p, UART_LCR);
|
||
|
|
serial_out(p, UART_LCR, UART_LCR_CONF_MODE_A);
|
||
|
|
|
||
|
|
- old_dll = serial_in(p, UART_DLL);
|
||
|
|
- old_dlm = serial_in(p, UART_DLM);
|
||
|
|
+ old_dl = serial_dl_read(p);
|
||
|
|
|
||
|
|
- serial_out(p, UART_DLL, 0);
|
||
|
|
- serial_out(p, UART_DLM, 0);
|
||
|
|
+ serial_dl_write(p, 0);
|
||
|
|
+ id = serial_dl_read(p);
|
||
|
|
|
||
|
|
- id = serial_in(p, UART_DLL) | serial_in(p, UART_DLM) << 8;
|
||
|
|
-
|
||
|
|
- serial_out(p, UART_DLL, old_dll);
|
||
|
|
- serial_out(p, UART_DLM, old_dlm);
|
||
|
|
+ serial_dl_write(p, old_dl);
|
||
|
|
serial_out(p, UART_LCR, old_lcr);
|
||
|
|
|
||
|
|
return id;
|
||
|
|
@@ -842,7 +839,7 @@ static int broken_efr(struct uart_8250_p
|
||
|
|
/*
|
||
|
|
* Exar ST16C2550 "A2" devices incorrectly detect as
|
||
|
|
* having an EFR, and report an ID of 0x0201. See
|
||
|
|
- * http://linux.derkeiler.com/Mailing-Lists/Kernel/2004-11/4812.html
|
||
|
|
+ * http://linux.derkeiler.com/Mailing-Lists/Kernel/2004-11/4812.html
|
||
|
|
*/
|
||
|
|
if (autoconfig_read_divisor_id(up) == 0x0201 && size_fifo(up) == 16)
|
||
|
|
return 1;
|