openwrt-owl/package/boot/uboot-lantiq/patches/0013-net-switchlib-add-driv...

376 lines
9.8 KiB
Diff
Raw Normal View History

From 42cb399df978a33539b95d668b3f973d927cb902 Mon Sep 17 00:00:00 2001
From: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
Date: Mon, 17 Dec 2012 23:37:57 +0100
Subject: net: switchlib: add driver for REALTEK RTL8306
Signed-off-by: Oliver Muth <dr.o.muth@gmx.de>
Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
--- a/drivers/net/switch/Makefile
+++ b/drivers/net/switch/Makefile
@@ -13,6 +13,7 @@ COBJS-$(CONFIG_SWITCH_MULTI) += switch.o
COBJS-$(CONFIG_SWITCH_PSB697X) += psb697x.o
COBJS-$(CONFIG_SWITCH_ADM6996I) += adm6996i.o
COBJS-$(CONFIG_SWITCH_AR8216) += ar8216.o
+COBJS-$(CONFIG_SWITCH_RTL8306) += rtl8306.o
COBJS := $(COBJS-y)
SRCS := $(COBJS:.o=.c)
--- /dev/null
+++ b/drivers/net/switch/rtl8306.c
@@ -0,0 +1,332 @@
+/*
+ * Based on OpenWrt linux driver
+ *
+ * Copyright (C) 2011-2012 Daniel Schwierzeck, daniel.schwierzeck@gmail.com
+ * Copyright (C) 2009 Felix Fietkau <nbd@nbd.name>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+#define DEBUG
+#include <common.h>
+#include <malloc.h>
+#include <switch.h>
+#include <miiphy.h>
+
+#define RTL8306_REG_PAGE 16
+#define RTL8306_REG_PAGE_LO (1 << 15)
+#define RTL8306_REG_PAGE_HI (1 << 1) /* inverted */
+#define RTL8306_CHIPID 0x5988
+
+#define RTL8306_NUM_VLANS 16
+#define RTL8306_NUM_PORTS 6
+#define RTL8306_PORT_CPU 5
+#define RTL8306_NUM_PAGES 4
+#define RTL8306_NUM_REGS 32
+
+enum {
+ RTL_TYPE_S,
+ RTL_TYPE_SD,
+ RTL_TYPE_SDM,
+};
+
+struct rtl_reg {
+ int page;
+ int phy;
+ int reg;
+ int bits;
+ int shift;
+ int inverted;
+};
+
+enum rtl_regidx {
+ RTL_REG_CHIPID,
+ RTL_REG_CHIPVER,
+ RTL_REG_CHIPTYPE,
+ RTL_REG_CPUPORT,
+
+ RTL_REG_EN_CPUPORT,
+ RTL_REG_EN_TAG_OUT,
+ RTL_REG_EN_TAG_CLR,
+ RTL_REG_EN_TAG_IN,
+ RTL_REG_TRAP_CPU,
+ RTL_REG_TRUNK_PORTSEL,
+ RTL_REG_EN_TRUNK,
+ RTL_REG_RESET,
+ RTL_REG_PHY_RESET,
+ RTL_REG_CPU_LINKUP,
+
+ RTL_REG_VLAN_ENABLE,
+ RTL_REG_VLAN_FILTER,
+ RTL_REG_VLAN_TAG_ONLY,
+ RTL_REG_VLAN_TAG_AWARE,
+#define RTL_VLAN_ENUM(id) \
+ RTL_REG_VLAN##id##_VID, \
+ RTL_REG_VLAN##id##_PORTMASK
+ RTL_VLAN_ENUM(0),
+ RTL_VLAN_ENUM(1),
+ RTL_VLAN_ENUM(2),
+ RTL_VLAN_ENUM(3),
+ RTL_VLAN_ENUM(4),
+ RTL_VLAN_ENUM(5),
+ RTL_VLAN_ENUM(6),
+ RTL_VLAN_ENUM(7),
+ RTL_VLAN_ENUM(8),
+ RTL_VLAN_ENUM(9),
+ RTL_VLAN_ENUM(10),
+ RTL_VLAN_ENUM(11),
+ RTL_VLAN_ENUM(12),
+ RTL_VLAN_ENUM(13),
+ RTL_VLAN_ENUM(14),
+ RTL_VLAN_ENUM(15),
+#define RTL_PORT_ENUM(id) \
+ RTL_REG_PORT##id##_PVID, \
+ RTL_REG_PORT##id##_NULL_VID_REPLACE, \
+ RTL_REG_PORT##id##_NON_PVID_DISCARD, \
+ RTL_REG_PORT##id##_VID_INSERT, \
+ RTL_REG_PORT##id##_TAG_INSERT, \
+ RTL_REG_PORT##id##_LINK, \
+ RTL_REG_PORT##id##_SPEED, \
+ RTL_REG_PORT##id##_NWAY, \
+ RTL_REG_PORT##id##_NRESTART, \
+ RTL_REG_PORT##id##_DUPLEX, \
+ RTL_REG_PORT##id##_RXEN, \
+ RTL_REG_PORT##id##_TXEN, \
+ RTL_REG_PORT##id##_LRNEN
+ RTL_PORT_ENUM(0),
+ RTL_PORT_ENUM(1),
+ RTL_PORT_ENUM(2),
+ RTL_PORT_ENUM(3),
+ RTL_PORT_ENUM(4),
+ RTL_PORT_ENUM(5),
+};
+
+static const struct rtl_reg rtl_regs[] = {
+ [RTL_REG_CHIPID] = { 0, 4, 30, 16, 0, 0 },
+ [RTL_REG_CHIPVER] = { 0, 4, 31, 8, 0, 0 },
+ [RTL_REG_CHIPTYPE] = { 0, 4, 31, 2, 8, 0 },
+
+ /* CPU port number */
+ [RTL_REG_CPUPORT] = { 2, 4, 21, 3, 0, 0 },
+ /* Enable CPU port function */
+ [RTL_REG_EN_CPUPORT] = { 3, 2, 21, 1, 15, 1 },
+ /* Enable CPU port tag insertion */
+ [RTL_REG_EN_TAG_OUT] = { 3, 2, 21, 1, 12, 0 },
+ /* Enable CPU port tag removal */
+ [RTL_REG_EN_TAG_CLR] = { 3, 2, 21, 1, 11, 0 },
+ /* Enable CPU port tag checking */
+ [RTL_REG_EN_TAG_IN] = { 0, 4, 21, 1, 7, 0 },
+ [RTL_REG_EN_TRUNK] = { 0, 0, 19, 1, 11, 1 },
+ [RTL_REG_TRUNK_PORTSEL] = { 0, 0, 16, 1, 6, 1 },
+ [RTL_REG_RESET] = { 0, 0, 16, 1, 12, 0 },
+ [RTL_REG_PHY_RESET] = { 0, 0, 0, 1, 15, 0 },
+ [RTL_REG_CPU_LINKUP] = { 0, 6, 22, 1, 15, 0 },
+ [RTL_REG_TRAP_CPU] = { 3, 2, 22, 1, 6, 0 },
+
+ [RTL_REG_VLAN_TAG_ONLY] = { 0, 0, 16, 1, 8, 1 },
+ [RTL_REG_VLAN_FILTER] = { 0, 0, 16, 1, 9, 1 },
+ [RTL_REG_VLAN_TAG_AWARE] = { 0, 0, 16, 1, 10, 1 },
+ [RTL_REG_VLAN_ENABLE] = { 0, 0, 18, 1, 8, 1 },
+
+#define RTL_VLAN_REGS(id, phy, page, regofs) \
+ [RTL_REG_VLAN##id##_VID] = { page, phy, 25 + regofs, 12, 0, 0 }, \
+ [RTL_REG_VLAN##id##_PORTMASK] = { page, phy, 24 + regofs, 6, 0, 0 }
+ RTL_VLAN_REGS( 0, 0, 0, 0),
+ RTL_VLAN_REGS( 1, 1, 0, 0),
+ RTL_VLAN_REGS( 2, 2, 0, 0),
+ RTL_VLAN_REGS( 3, 3, 0, 0),
+ RTL_VLAN_REGS( 4, 4, 0, 0),
+ RTL_VLAN_REGS( 5, 0, 1, 2),
+ RTL_VLAN_REGS( 6, 1, 1, 2),
+ RTL_VLAN_REGS( 7, 2, 1, 2),
+ RTL_VLAN_REGS( 8, 3, 1, 2),
+ RTL_VLAN_REGS( 9, 4, 1, 2),
+ RTL_VLAN_REGS(10, 0, 1, 4),
+ RTL_VLAN_REGS(11, 1, 1, 4),
+ RTL_VLAN_REGS(12, 2, 1, 4),
+ RTL_VLAN_REGS(13, 3, 1, 4),
+ RTL_VLAN_REGS(14, 4, 1, 4),
+ RTL_VLAN_REGS(15, 0, 1, 6),
+
+#define REG_PORT_SETTING(port, phy) \
+ [RTL_REG_PORT##port##_SPEED] = { 0, phy, 0, 1, 13, 0 }, \
+ [RTL_REG_PORT##port##_NWAY] = { 0, phy, 0, 1, 12, 0 }, \
+ [RTL_REG_PORT##port##_NRESTART] = { 0, phy, 0, 1, 9, 0 }, \
+ [RTL_REG_PORT##port##_DUPLEX] = { 0, phy, 0, 1, 8, 0 }, \
+ [RTL_REG_PORT##port##_TXEN] = { 0, phy, 24, 1, 11, 0 }, \
+ [RTL_REG_PORT##port##_RXEN] = { 0, phy, 24, 1, 10, 0 }, \
+ [RTL_REG_PORT##port##_LRNEN] = { 0, phy, 24, 1, 9, 0 }, \
+ [RTL_REG_PORT##port##_LINK] = { 0, phy, 1, 1, 2, 0 }, \
+ [RTL_REG_PORT##port##_NULL_VID_REPLACE] = { 0, phy, 22, 1, 12, 0 }, \
+ [RTL_REG_PORT##port##_NON_PVID_DISCARD] = { 0, phy, 22, 1, 11, 0 }, \
+ [RTL_REG_PORT##port##_VID_INSERT] = { 0, phy, 22, 2, 9, 0 }, \
+ [RTL_REG_PORT##port##_TAG_INSERT] = { 0, phy, 22, 2, 0, 0 }
+
+ REG_PORT_SETTING(0, 0),
+ REG_PORT_SETTING(1, 1),
+ REG_PORT_SETTING(2, 2),
+ REG_PORT_SETTING(3, 3),
+ REG_PORT_SETTING(4, 4),
+ REG_PORT_SETTING(5, 6),
+
+#define REG_PORT_PVID(phy, page, regofs) \
+ { page, phy, 24 + regofs, 4, 12, 0 }
+ [RTL_REG_PORT0_PVID] = REG_PORT_PVID(0, 0, 0),
+ [RTL_REG_PORT1_PVID] = REG_PORT_PVID(1, 0, 0),
+ [RTL_REG_PORT2_PVID] = REG_PORT_PVID(2, 0, 0),
+ [RTL_REG_PORT3_PVID] = REG_PORT_PVID(3, 0, 0),
+ [RTL_REG_PORT4_PVID] = REG_PORT_PVID(4, 0, 0),
+ [RTL_REG_PORT5_PVID] = REG_PORT_PVID(0, 1, 2),
+};
+
+static void rtl_set_page(struct mii_dev *bus, unsigned int page)
+{
+ u16 pgsel;
+
+ BUG_ON(page > RTL8306_NUM_PAGES);
+
+ pgsel = bus->read(bus, 0, MDIO_DEVAD_NONE, RTL8306_REG_PAGE);
+ pgsel &= ~(RTL8306_REG_PAGE_LO | RTL8306_REG_PAGE_HI);
+
+ if (page & (1 << 0))
+ pgsel |= RTL8306_REG_PAGE_LO;
+
+ if (!(page & (1 << 1))) /* bit is inverted */
+ pgsel |= RTL8306_REG_PAGE_HI;
+
+ bus->write(bus, 0, MDIO_DEVAD_NONE, RTL8306_REG_PAGE, pgsel);
+
+}
+
+static __maybe_unused int rtl_w16(struct mii_dev *bus, unsigned int page, unsigned int phy,
+ unsigned int reg, u16 val)
+{
+ rtl_set_page(bus, page);
+
+ bus->write(bus, phy, MDIO_DEVAD_NONE, reg, val);
+ bus->read(bus, phy, MDIO_DEVAD_NONE, reg); /* flush */
+
+ return 0;
+}
+
+static int rtl_r16(struct mii_dev *bus, unsigned int page, unsigned int phy,
+ unsigned int reg)
+{
+ rtl_set_page(bus, page);
+
+ return bus->read(bus, phy, MDIO_DEVAD_NONE, reg);
+}
+
+static u16 rtl_rmw(struct mii_dev *bus, unsigned int page, unsigned int phy,
+ unsigned int reg, u16 mask, u16 val)
+{
+ u16 r;
+
+ rtl_set_page(bus, page);
+
+ r = bus->read(bus, phy, MDIO_DEVAD_NONE, reg);
+ r &= ~mask;
+ r |= val;
+ bus->write(bus, phy, MDIO_DEVAD_NONE, reg, r);
+
+ return bus->read(bus, phy, MDIO_DEVAD_NONE, reg); /* flush */
+}
+
+static int rtl_get(struct mii_dev *bus, enum rtl_regidx s)
+{
+ const struct rtl_reg *r = &rtl_regs[s];
+ u16 val;
+
+ BUG_ON(s >= ARRAY_SIZE(rtl_regs));
+
+ if (r->bits == 0) /* unimplemented */
+ return 0;
+
+ val = rtl_r16(bus, r->page, r->phy, r->reg);
+
+ if (r->shift > 0)
+ val >>= r->shift;
+
+ if (r->inverted)
+ val = ~val;
+
+ val &= (1 << r->bits) - 1;
+
+ return val;
+}
+
+static __maybe_unused int rtl_set(struct mii_dev *bus, enum rtl_regidx s, unsigned int val)
+{
+ const struct rtl_reg *r = &rtl_regs[s];
+ u16 mask = 0xffff;
+
+ BUG_ON(s >= ARRAY_SIZE(rtl_regs));
+
+ if (r->bits == 0) /* unimplemented */
+ return 0;
+
+ if (r->shift > 0)
+ val <<= r->shift;
+
+ if (r->inverted)
+ val = ~val;
+
+ if (r->bits != 16) {
+ mask = (1 << r->bits) - 1;
+ mask <<= r->shift;
+ }
+
+ val &= mask;
+
+ return rtl_rmw(bus, r->page, r->phy, r->reg, mask, val);
+}
+
+static int rtl8306_probe(struct switch_device *dev)
+{
+ struct mii_dev *bus = dev->bus;
+ unsigned int chipid, chipver, chiptype;
+
+ chipid = rtl_get(bus, RTL_REG_CHIPID);
+ chipver = rtl_get(bus, RTL_REG_CHIPVER);
+ chiptype = rtl_get(bus, RTL_REG_CHIPTYPE);
+
+ debug("%s: chipid %x, chipver %x, chiptype %x\n",
+ __func__, chipid, chipver, chiptype);
+
+ if (chipid == RTL8306_CHIPID)
+ return 0;
+
+ return 1;
+}
+
+static void rtl8306_setup(struct switch_device *dev)
+{
+ struct mii_dev *bus = dev->bus;
+
+ /* initialize cpu port settings */
+ rtl_set(bus, RTL_REG_CPUPORT, dev->cpu_port);
+ rtl_set(bus, RTL_REG_EN_CPUPORT, 1);
+
+ /* enable phy 5 link status */
+ rtl_set(bus, RTL_REG_CPU_LINKUP, 1);
+// rtl_set(bus, RTL_REG_PORT5_TXEN, 1);
+// rtl_set(bus, RTL_REG_PORT5_RXEN, 1);
+// rtl_set(bus, RTL_REG_PORT5_LRNEN, 1);
+#ifdef DEBUG
+ debug("%s: CPU link up: %i\n",
+ __func__, rtl_get(bus, RTL_REG_PORT5_LINK));
+#endif
+
+}
+
+static struct switch_driver rtl8306_drv = {
+ .name = "rtl8306",
+};
+
+void switch_rtl8306_init(void)
+{
+ /* For archs with manual relocation */
+ rtl8306_drv.probe = rtl8306_probe;
+ rtl8306_drv.setup = rtl8306_setup;
+
+ switch_driver_register(&rtl8306_drv);
+}
--- a/drivers/net/switch/switch.c
+++ b/drivers/net/switch/switch.c
@@ -26,6 +26,9 @@ void switch_init(void)
#if defined(CONFIG_SWITCH_AR8216)
switch_ar8216_init();
#endif
+#if defined(CONFIG_SWITCH_RTL8306)
+ switch_rtl8306_init();
+#endif
board_switch_init();
}
--- a/include/switch.h
+++ b/include/switch.h
@@ -100,6 +100,7 @@ static inline void switch_setup(struct s
extern void switch_psb697x_init(void);
extern void switch_adm6996i_init(void);
extern void switch_ar8216_init(void);
+extern void switch_rtl8306_init(void);
#endif /* __SWITCH_H */