openwrt-owl/target/linux/ramips/dts/ASL26555-16M.dts

/dts-v1/;

/include/ "rt3050.dtsi"

/ {
	compatible = "ASL26555", "ralink,rt3050-soc";
	model = "Alpha ASL26555";

	palmbus@10000000 {
		sysc@0 {
			ralink,pinmux = "spi", "mdio", "uartlite", "sdram", "rgmii";
			ralink,gpiomux = "i2c", "jtag";
			ralink,uartmux = "gpio";
			ralink,wdtmux = <1>;
		};

		gpio0: gpio@600 {
			status = "okay";
		};

		spi@b00 {
			status = "okay";
			m25p80@0 {
				#address-cells = <1>;
				#size-cells = <1>;
				compatible = "s25sl12801";
				reg = <0 0>;
				linux,modalias = "m25p80", "s25sl12801";
				spi-max-frequency = <10000000>;

				partition@0 {
					label = "uboot";
					reg = <0x0 0x30000>;
					read-only;
				};
				partition@30000 {
					label = "uboot-env";
					reg = <0x30000 0x10000>;
					read-only;
				};
				partition@40000 {
					label = "factory";
					reg = <0x40000 0x10000>;
					read-only;
				};
				partition@50000 {
					label = "firmware";
					reg = <0x50000 0xf80000>;
				};
				partition@fd0000 {
					label = "cert";
					reg = <0xfd0000 0x10000>;
					read-only;
				};
				partition@fe0000 {
					label = "langpack";
					reg = <0xfe0000 0x10000>;
					read-only;
				};
				partition@ff0000 {
					label = "devdata";
					reg = <0xff0000 0x10000>;
					read-only;
				};
			};
		};
	};

	ethernet@10100000 {
		status = "okay";
	};

	esw@10110000 {
		status = "okay";
		ralink,portmap = <0x1e>;
	};

	wmac@10180000 {
		status = "okay";
	};

	otg@101c0000 {
		status = "okay";
	};

	gpio-keys-polled {
		compatible = "gpio-keys-polled";
		#address-cells = <1>;
		#size-cells = <0>;
		poll-interval = <20>;
		reset {
			label = "reset";
			gpios = <&gpio0 10 0>;
			linux,code = <0x198>;
		};
		wps {
			label = "wps";
			gpios = <&gpio0 12 0>;
			linux,code = <0x211>;
		};
	};

	gpio-leds {
		compatible = "gpio-leds";
		eth {
			label = "asl26555:green:eth";
			gpios = <&gpio0 0 1>;
		};
		wan-red {
			label = "asl26555:red:wan";
			gpios = <&gpio0 1 0>;
		};
		wan-green {
			label = "asl26555:green:wan";
			gpios = <&gpio0 2 0>;
		};
		wlan {
			label = "asl26555:green:wlan";
			gpios = <&gpio0 7 0>;
		};
		power-green {
			label = "asl26555:green:power";
			gpios = <&gpio0 8 0>;
		};
		power-red {
			label = "asl26555:red:power";
			gpios = <&gpio0 9 0>;
		};
		3g-green {
			label = "asl26555:green:3g";
			gpios = <&gpio0 14 1>;
		};
		3g-red {
			label = "asl26555:red:3g";
			gpios = <&gpio0 17 1>;
		};
	};
};