openwrt-owl/target/linux/kirkwood/patches/100-dockstar.patch

207 lines
5.5 KiB
Diff
Raw Normal View History

This patch adds support for the Seagate FreeAgent DockStar, a Marvell
Sheevaplug derivative. I have already registered the DOCKSTAR machine
ID.
Signed-off-by: Eric Cooper <ecc@xxxxxxx>
---
arch/arm/mach-kirkwood/Kconfig | 6 ++
arch/arm/mach-kirkwood/Makefile | 1 +
arch/arm/mach-kirkwood/dockstar-setup.c | 112 +++++++++++++++++++++++++++++++
arch/arm/tools/mach-types | 1 +
4 files changed, 120 insertions(+), 0 deletions(-)
create mode 100644 arch/arm/mach-kirkwood/dockstar-setup.c
diff --git a/arch/arm/mach-kirkwood/Kconfig b/arch/arm/mach-kirkwood/Kconfig
index 29b2163..74d832f 100644
--- a/arch/arm/mach-kirkwood/Kconfig
+++ b/arch/arm/mach-kirkwood/Kconfig
@@ -32,6 +32,12 @@ config MACH_TS219
Say 'Y' here if you want your kernel to support the
QNAP TS-119 and TS-219 Turbo NAS devices.
+config MACH_DOCKSTAR
+ bool "Seagate FreeAgent DockStar"
+ help
+ Say 'Y' here if you want your kernel to support the
+ Seagate FreeAgent DockStar.
+
endmenu
endif
diff --git a/arch/arm/mach-kirkwood/Makefile b/arch/arm/mach-kirkwood/Makefile
index c0cd5d3..025b256 100644
--- a/arch/arm/mach-kirkwood/Makefile
+++ b/arch/arm/mach-kirkwood/Makefile
@@ -6,4 +6,5 @@ obj-$(CONFIG_MACH_ESATA_SHEEVAPLUG) += sheevaplug-setup.o
obj-$(CONFIG_MACH_SHEEVAPLUG) += sheevaplug-setup.o
obj-$(CONFIG_MACH_TS219) += ts219-setup.o tsx1x-common.o
+obj-$(CONFIG_MACH_DOCKSTAR) += dockstar-setup.o
obj-$(CONFIG_CPU_IDLE) += cpuidle.o
diff --git a/arch/arm/mach-kirkwood/dockstar-setup.c b/arch/arm/mach-kirkwood/dockstar-setup.c
new file mode 100644
index 0000000..a90475d
--- /dev/null
+++ b/arch/arm/mach-kirkwood/dockstar-setup.c
@@ -0,0 +1,148 @@
+/*
+ * arch/arm/mach-kirkwood/dockstar-setup.c
+ *
+ * Seagate FreeAgent DockStar Setup
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/ata_platform.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mv643xx_eth.h>
+#include <linux/gpio.h>
+#include <linux/leds.h>
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+#include <mach/kirkwood.h>
+#include <plat/mvsdio.h>
+#include <plat/orion_nand.h>
+#include "common.h"
+#include "mpp.h"
+
+static struct mtd_partition dockstar_nand_parts[] = {
+ {
+ .name = "u-boot",
+ .offset = 0,
+ .size = SZ_1M
+ }, {
+ .name = "second_stage_u-boot",
+ .offset = MTDPART_OFS_NXTBLK,
+ .size = SZ_1M
+ }, {
+ .name = "uImage",
+ .offset = MTDPART_OFS_NXTBLK,
+ .size = SZ_1M + SZ_2M,
+ }, {
+ .name = "rootfs",
+ .offset = MTDPART_OFS_NXTBLK,
+ .size = SZ_64M,
+ }, {
+ .name = "data",
+ .offset = MTDPART_OFS_NXTBLK,
+ .size = MTDPART_SIZ_FULL
+ },
+};
+
+static struct resource dockstar_nand_resource = {
+ .flags = IORESOURCE_MEM,
+ .start = KIRKWOOD_NAND_MEM_PHYS_BASE,
+ .end = KIRKWOOD_NAND_MEM_PHYS_BASE +
+ KIRKWOOD_NAND_MEM_SIZE - 1,
+};
+
+static struct orion_nand_data dockstar_nand_data = {
+ .parts = dockstar_nand_parts,
+ .nr_parts = ARRAY_SIZE(dockstar_nand_parts),
+ .cle = 0,
+ .ale = 1,
+ .width = 8,
+ .chip_delay = 25,
+};
+
+static struct platform_device dockstar_nand_flash = {
+ .name = "orion_nand",
+ .id = -1,
+ .dev = {
+ .platform_data = &dockstar_nand_data,
+ },
+ .resource = &dockstar_nand_resource,
+ .num_resources = 1,
+};
+
+
+static struct mv643xx_eth_platform_data dockstar_ge00_data = {
+ .phy_addr = MV643XX_ETH_PHY_ADDR(0),
+};
+
+static struct gpio_led dockstar_led_pins[] = {
+ {
+ .name = "dockstar:green:health",
+ .default_trigger = "default-on",
+ .gpio = 46,
+ .active_low = 1,
+ },
+ {
+ .name = "dockstar:orange:misc",
+ .default_trigger = "none",
+ .gpio = 47,
+ .active_low = 1,
+ },
+};
+
+static struct gpio_led_platform_data dockstar_led_data = {
+ .leds = dockstar_led_pins,
+ .num_leds = ARRAY_SIZE(dockstar_led_pins),
+};
+
+static struct platform_device dockstar_leds = {
+ .name = "leds-gpio",
+ .id = -1,
+ .dev = {
+ .platform_data = &dockstar_led_data,
+ }
+};
+
+static unsigned int dockstar_mpp_config[] __initdata = {
+ MPP29_GPIO, /* USB Power Enable */
+ MPP46_GPIO, /* LED green */
+ MPP47_GPIO, /* LED orange */
+ 0
+};
+
+static void __init dockstar_init(void)
+{
+ /*
+ * Basic setup. Needs to be called early.
+ */
+ kirkwood_init();
+
+ /* setup gpio pin select */
+ kirkwood_mpp_conf(dockstar_mpp_config);
+
+ kirkwood_uart0_init();
+
+ if (gpio_request(29, "USB Power Enable") != 0 ||
+ gpio_direction_output(29, 1) != 0)
+ printk(KERN_ERR "can't set up GPIO 29 (USB Power Enable)\n");
+ kirkwood_ehci_init();
+
+ kirkwood_ge00_init(&dockstar_ge00_data);
+
+ platform_device_register(&dockstar_nand_flash);
+ platform_device_register(&dockstar_leds);
+}
+
+MACHINE_START(DOCKSTAR, "Seagate FreeAgent DockStar")
+ .phys_io = KIRKWOOD_REGS_PHYS_BASE,
+ .io_pg_offst = ((KIRKWOOD_REGS_VIRT_BASE) >> 18) & 0xfffc,
+ .boot_params = 0x00000100,
+ .init_machine = dockstar_init,
+ .map_io = kirkwood_map_io,
+ .init_irq = kirkwood_init_irq,
+ .timer = &kirkwood_timer,
+MACHINE_END
diff --git a/arch/arm/tools/mach-types b/arch/arm/tools/mach-types
index 48cbdcb..8d56837 100644
--- a/arch/arm/tools/mach-types
+++ b/arch/arm/tools/mach-types
@@ -2245,3 +2245,4 @@ davinci_dm365_dvr MACH_DAVINCI_DM365_DVR DAVINCI_DM365_DVR 2963
omap3_wl_ff MACH_OMAP3_WL_FF OMAP3_WL_FF 2258
simcom MACH_SIMCOM SIMCOM 2259
mcwebio MACH_MCWEBIO MCWEBIO 2260
+dockstar MACH_DOCKSTAR DOCKSTAR 2998
--
1.7.1