openwrt-owl/target/linux/ramips/dts/kng_rc.dts

166 lines
2.5 KiB
Plaintext
Raw Normal View History

/dts-v1/;
#include "mt7620a.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
/ {
model = "ZyXEL Keenetic Viva";
gpio-leds {
compatible = "gpio-leds";
wan {
label = "kng_rc:green:wan";
gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
};
usb {
label = "kng_rc:green:usb";
gpios = <&gpio0 8 GPIO_ACTIVE_LOW>;
};
power_alert {
label = "kng_rc:red:power";
gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
};
wifi {
label = "kng_rc:green:wifi";
gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
};
power {
label = "kng_rc:green:power";
gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
};
};
gpio-keys-polled {
compatible = "gpio-keys";
#address-cells = <1>;
#size-cells = <0>;
poll-interval = <20>;
reset {
label = "reset";
gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
linux,code = <KEY_RESTART>;
};
wps {
label = "wps";
gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
linux,code = <KEY_WPS_BUTTON>;
};
fn {
label = "fn";
gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
linux,code = <BTN_0>;
};
};
gpio_export {
compatible = "gpio-export";
#size-cells = <0>;
usb_power {
gpio-export,name = "usb";
gpio-export,output = <1>;
gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>;
};
};
rtl8367rb {
compatible = "realtek,rtl8367b";
cpu_port = <7>;
realtek,extif2 = <1 0 1 1 1 1 1 1 2>;
mdio = <&mdio0>;
};
};
&spi0 {
status = "okay";
m25p80@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <10000000>;
partition@0 {
label = "u-boot";
reg = <0x0 0x30000>;
read-only;
};
partition@30000 {
label = "u-boot-env";
reg = <0x30000 0x10000>;
read-only;
};
factory: partition@40000 {
label = "factory";
reg = <0x40000 0x10000>;
read-only;
};
partition@50000 {
label = "firmware";
reg = <0x50000 0xfb0000>;
};
};
};
&pinctrl {
state_default: pinctrl0 {
gpio {
ralink,group = "i2c", "uartf";
ralink,function = "gpio";
};
};
};
&ethernet {
status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&rgmii2_pins &mdio_pins>;
mtd-mac-address = <&factory 0x00004>;
port@4 {
status = "okay";
mediatek,fixed-link = <1000 1 1 1>;
phy-mode = "rgmii";
phy-handle = <&phy4>;
};
mdio0: mdio-bus {
status = "okay";
phy4: ethernet-phy@4 {
reg = <4>;
phy-mode = "rgmii";
};
};
};
&gsw {
mediatek,port4 = "gmac";
};
&wmac {
ralink,mtd-eeprom = <&factory 0>;
};
&ehci {
status = "okay";
};
&ohci {
status = "okay";
};