openwrt-owl/target/linux/ramips/dts/WLI-TX4-AG300N.dts

115 lines
1.7 KiB
Plaintext
Raw Normal View History

/dts-v1/;
#include "rt2880.dtsi"
#include <dt-bindings/input/input.h>
/ {
#address-cells = <1>;
#size-cells = <1>;
compatible = "WLI-TX4-AG300N", "ralink,rt2880-soc";
model = "Buffalo WLI-TX4-AG300N";
cfi@1f000000 {
compatible = "cfi-flash";
reg = <0x1f000000 0x800000>;
bank-width = <2>;
device-width = <2>;
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "uboot";
reg = <0x0 0x30000>;
read-only;
};
partition@30000 {
label = "uboot-env";
reg = <0x30000 0x10000>;
read-only;
};
factory: partition@40000 {
label = "factory";
reg = <0x40000 0x10000>;
read-only;
};
partition@50000 {
label = "firmware";
reg = <0x50000 0x3b0000>;
};
};
gpio-keys-polled {
compatible = "gpio-keys-polled";
#address-cells = <1>;
#size-cells = <0>;
poll-interval = <100>;
wps {
label = "wps";
gpios = <&gpio0 0 1>;
linux,code = <KEY_WPS_BUTTON>;
};
bandwidth {
label = "bandwidth";
gpios = <&gpio0 8 0>;
linux,code = <KEY_RESTART>;
};
reset {
label = "reset";
gpios = <&gpio0 9 1>;
linux,code = <KEY_RESTART>;
};
};
gpio-leds {
compatible = "gpio-leds";
diag {
label = "wli-tx4-ag300n:red:diag";
gpios = <&gpio0 10 1>;
};
power {
label = "wli-tx4-ag300n:blue:power";
gpios = <&gpio0 12 1>;
};
security {
label = "wli-tx4-ag300n:blue:security";
gpios = <&gpio0 13 1>;
};
};
};
&gpio0 {
status = "okay";
};
&ethernet {
status = "okay";
mtd-mac-address = <&factory 0x4>;
port@0 {
mediatek,fixed-link = <100 1 1 1>;
};
mdio-bus {
status = "okay";
phy0: ethernet-phy@0 {
phy-mode = "mii";
reg = <0>;
};
};
};
&wmac {
ralink,mtd-eeprom = <&factory 0>;
};