openwrt-owl/target/linux/ramips/dts/MAC1200RV2.dts

95 lines
1.4 KiB
Plaintext
Raw Normal View History

/dts-v1/;
#include "mt7628an.dtsi"
/ {
compatible = "mercury,mac1200rv2", "mediatek,mt7628an-soc";
model = "Mercury MAC1200R v2";
chosen {
bootargs = "console=ttyS0,57600";
};
memory@0 {
device_type = "memory";
reg = <0x0 0x2000000>;
};
gpio-leds {
compatible = "gpio-leds";
status {
label = "mac1200rv2:green:status";
gpios = <&gpio0 11 1>;
};
};
};
&spi0 {
status = "okay";
m25p80@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "w25q128";
reg = <0 0>;
linux,modalias = "m25p80", "w25q128";
spi-max-frequency = <10000000>;
m25p,chunked-io = <32>;
partition@0 {
label = "u-boot";
reg = <0x0 0x1d800>;
};
factory: partition@0x1d800 {
label = "factory_info";
reg = <0x1d800 0x800>;
read-only;
};
art: partition@0x1e000 {
label = "art";
reg = <0x1e000 0x2000>;
read-only;
};
partition@20000 {
label = "config";
reg = <0x20000 0x10000>;
};
partition@30000 {
label = "u-boot2";
reg = <0x30000 0x10000>;
};
partition@40000 {
label = "firmware";
reg = <0x40000 0x7c0000>;
};
};
};
&ethernet {
pinctrl-names = "default";
mtd-mac-address = <&factory 0xd>;
ralink,port-map = "llllw";
};
&wmac {
status = "okay";
ralink,mtd-eeprom = <&art 0x0>;
};
&pcie {
status = "okay";
pcie-bridge {
mt76@0,0 {
reg = <0x0000 0 0 0 0>;
device_type = "pci";
mediatek,mtd-eeprom = <&art 0x1000>;
mediatek,2ghz = <0>;
};
};
};