openwrt-owl/target/linux/ramips/dts/ArcherC20i.dts

155 lines
2.2 KiB
Plaintext
Raw Normal View History

/dts-v1/;
#include "mt7620a.dtsi"
#include <dt-bindings/input/input.h>
/ {
compatible = "ralink,mt7620a-soc";
model = "TP-Link Archer C20i";
chosen {
bootargs = "console=ttyS0,115200";
};
gpio-leds {
compatible = "gpio-leds";
lan {
label = "c20i:blue:lan";
gpios = <&gpio0 1 1>;
};
usb {
label = "c20i:blue:usb";
gpios = <&gpio0 11 1>;
};
wps {
label = "c20i:blue:wps";
gpios = <&gpio1 15 1>;
};
wan {
label = "c20i:blue:wan";
gpios = <&gpio2 0 1>;
};
wlan {
label = "c20i:blue:wlan";
gpios = <&gpio3 0 1>;
};
};
gpio-keys {
compatible = "gpio-keys";
#address-cells = <1>;
#size-cells = <0>;
rfkill {
label = "rfkill";
gpios = <&gpio0 2 1>;
linux,code = <KEY_RFKILL>;
};
reset_wps {
label = "reset_wps";
gpios = <&gpio0 13 1>;
linux,code = <KEY_RESTART>;
};
};
};
&gpio1 {
status = "okay";
};
&gpio2 {
status = "okay";
};
&gpio3 {
status = "okay";
};
&spi0 {
status = "okay";
m25p80@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "jedec,spi-nor";
reg = <0>;
linux,modalias = "m25p80", "mx25l6405d";
spi-max-frequency = <10000000>;
partition@0 {
label = "u-boot";
reg = <0x0 0x20000>;
read-only;
};
partition@20000 {
label = "firmware";
reg = <0x20000 0x7a0000>;
};
partition@7c0000 {
label = "config";
reg = <0x7c0000 0x10000>;
};
rom: partition@7d0000 {
label = "rom";
reg = <0x7d0000 0x10000>;
};
partition@7e0000 {
label = "romfile";
reg = <0x7e0000 0x10000>;
};
radio: partition@7f0000 {
label = "radio";
reg = <0x7f0000 0x10000>;
};
};
};
&pinctrl {
state_default: pinctrl0 {
gpio {
ralink,group = "i2c", "uartf", "rgmii1", "rgmii2", "wled", "nd_sd", "ephy", "spi refclk";
ralink,function = "gpio";
};
};
};
&ethernet {
pinctrl-names = "default";
mtd-mac-address = <&rom 0xf100>;
mediatek,portmap = "wllll";
};
&ehci {
status = "okay";
};
&ohci {
status = "okay";
};
&gsw {
mediatek,port4 = "ephy";
};
&wmac {
ralink,mtd-eeprom = <&radio 0>;
};
&pcie {
status = "okay";
pcie-bridge {
mt76@0,0 {
reg = <0x0000 0 0 0 0>;
device_type = "pci";
mediatek,mtd-eeprom = <&radio 32768>;
mediatek,2ghz = <0>;
};
};
};