openwrt-owl/target/linux/ipq806x/patches/0138-PCI-qcom-Add-support-for-pcie-controllers-on-IPQ8064.patch

From 98567c99b4dcd80fc9e5dd97229ebb9a7f6dab03 Mon Sep 17 00:00:00 2001
From: Kumar Gala <galak@codeaurora.org>
Date: Fri, 16 May 2014 11:53:23 -0500
Subject: [PATCH 138/182] PCI: qcom: Add support for pcie controllers on
 IPQ8064

---
 arch/arm/mach-qcom/Kconfig  |    2 +
 drivers/pci/host/Makefile   |    1 +
 drivers/pci/host/pci-qcom.c |  682 +++++++++++++++++++++++++++++++++++++++++++
 3 files changed, 685 insertions(+)
 create mode 100644 drivers/pci/host/pci-qcom.c

--- a/arch/arm/mach-qcom/Kconfig
+++ b/arch/arm/mach-qcom/Kconfig
@@ -7,6 +7,8 @@ config ARCH_QCOM
 	select GENERIC_CLOCKEVENTS
 	select HAVE_SMP
 	select PINCTRL
+	select MIGHT_HAVE_PCI
+	select PCI_DOMAINS if PCI
 	select QCOM_SCM if SMP
 	help
 	  Support for Qualcomm's devicetree based systems.
--- a/drivers/pci/host/Makefile
+++ b/drivers/pci/host/Makefile
@@ -4,3 +4,4 @@ obj-$(CONFIG_PCI_IMX6) += pci-imx6.o
 obj-$(CONFIG_PCI_MVEBU) += pci-mvebu.o
 obj-$(CONFIG_PCI_TEGRA) += pci-tegra.o
 obj-$(CONFIG_PCI_RCAR_GEN2) += pci-rcar-gen2.o
+obj-$(CONFIG_ARCH_QCOM) += pci-qcom.o
--- /dev/null
+++ b/drivers/pci/host/pci-qcom.c
@@ -0,0 +1,682 @@
+/* Copyright (c) 2012-2014, The Linux Foundation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+/*
+ * QCOM MSM PCIe controller driver.
+ */
+
+#include <linux/kernel.h>
+#include <linux/pci.h>
+#include <linux/gpio.h>
+#include <linux/of_gpio.h>
+#include <linux/platform_device.h>
+#include <linux/of_address.h>
+#include <linux/clk.h>
+#include <linux/reset.h>
+#include <linux/delay.h>
+
+/* Root Complex Port vendor/device IDs */
+#define PCIE_VENDOR_ID_RCP		0x17cb
+#define PCIE_DEVICE_ID_RCP		0x0101
+
+#define __set(v, a, b)	(((v) << (b)) & GENMASK(a, b))
+
+#define PCIE20_PARF_PCS_DEEMPH		0x34
+#define PCIE20_PARF_PCS_DEEMPH_TX_DEEMPH_GEN1(x)	__set(x, 21, 16)
+#define PCIE20_PARF_PCS_DEEMPH_TX_DEEMPH_GEN2_3_5DB(x)	__set(x, 13, 8)
+#define PCIE20_PARF_PCS_DEEMPH_TX_DEEMPH_GEN2_6DB(x)	__set(x, 5, 0)
+
+#define PCIE20_PARF_PCS_SWING		0x38
+#define PCIE20_PARF_PCS_SWING_TX_SWING_FULL(x)		__set(x, 14, 8)
+#define PCIE20_PARF_PCS_SWING_TX_SWING_LOW(x)		__set(x, 6, 0)
+
+#define PCIE20_PARF_PHY_CTRL		0x40
+#define PCIE20_PARF_PHY_CTRL_PHY_TX0_TERM_OFFST(x)	__set(x, 20, 16)
+#define PCIE20_PARF_PHY_CTRL_PHY_LOS_LEVEL(x)		__set(x, 12, 8)
+#define PCIE20_PARF_PHY_CTRL_PHY_RTUNE_REQ		(1 << 4)
+#define PCIE20_PARF_PHY_CTRL_PHY_TEST_BURNIN		(1 << 2)
+#define PCIE20_PARF_PHY_CTRL_PHY_TEST_BYPASS		(1 << 1)
+#define PCIE20_PARF_PHY_CTRL_PHY_TEST_PWR_DOWN		(1 << 0)
+
+#define PCIE20_PARF_PHY_REFCLK		0x4C
+#define PCIE20_PARF_CONFIG_BITS		0x50
+
+#define PCIE20_ELBI_SYS_CTRL		0x04
+#define PCIE20_ELBI_SYS_CTRL_LTSSM_EN	0x01
+
+#define PCIE20_CAP			0x70
+#define PCIE20_CAP_LINKCTRLSTATUS	(PCIE20_CAP + 0x10)
+
+#define PCIE20_COMMAND_STATUS		0x04
+#define PCIE20_BUSNUMBERS		0x18
+#define PCIE20_MEMORY_BASE_LIMIT	0x20
+
+#define PCIE20_AXI_MSTR_RESP_COMP_CTRL0 0x818
+#define PCIE20_AXI_MSTR_RESP_COMP_CTRL1 0x81c
+#define PCIE20_PLR_IATU_VIEWPORT	0x900
+#define PCIE20_PLR_IATU_CTRL1		0x904
+#define PCIE20_PLR_IATU_CTRL2		0x908
+#define PCIE20_PLR_IATU_LBAR		0x90C
+#define PCIE20_PLR_IATU_UBAR		0x910
+#define PCIE20_PLR_IATU_LAR		0x914
+#define PCIE20_PLR_IATU_LTAR		0x918
+#define PCIE20_PLR_IATU_UTAR		0x91c
+
+#define MSM_PCIE_DEV_CFG_ADDR		0x01000000
+
+#define RD 0
+#define WR 1
+
+#define MAX_RC_NUM	3
+#define PCIE_BUS_PRIV_DATA(pdev) \
+	(((struct pci_sys_data *)pdev->bus->sysdata)->private_data)
+
+/* PCIe TLP types that we are interested in */
+#define PCI_CFG0_RDWR	0x4
+#define PCI_CFG1_RDWR	0x5
+
+#define readl_poll_timeout(addr, val, cond, sleep_us, timeout_us) \
+({ \
+	unsigned long timeout = jiffies + usecs_to_jiffies(timeout_us); \
+	might_sleep_if(timeout_us); \
+	for (;;) { \
+		(val) = readl(addr); \
+		if (cond) \
+			break; \
+		if (timeout_us && time_after(jiffies, timeout)) { \
+			(val) = readl(addr); \
+			break; \
+		} \
+		if (sleep_us) \
+			usleep_range(DIV_ROUND_UP(sleep_us, 4), sleep_us); \
+	} \
+	(cond) ? 0 : -ETIMEDOUT; \
+})
+
+struct qcom_pcie {
+	void __iomem		*elbi_base;
+	void __iomem		*parf_base;
+	void __iomem		*dwc_base;
+	void __iomem		*cfg_base;
+	int			reset_gpio;
+	struct clk		*iface_clk;
+	struct clk		*bus_clk;
+	struct clk		*phy_clk;
+	int			irq_int[4];
+	struct reset_control	*axi_reset;
+	struct reset_control	*ahb_reset;
+	struct reset_control	*por_reset;
+	struct reset_control	*pci_reset;
+	struct reset_control	*phy_reset;
+
+	struct resource		conf;
+	struct resource		io;
+	struct resource		mem;
+};
+
+static int qcom_pcie_map_irq(const struct pci_dev *dev, u8 slot, u8 pin);
+static int qcom_pcie_setup(int nr, struct pci_sys_data *sys);
+static int msm_pcie_rd_conf(struct pci_bus *bus, u32 devfn, int where,
+			    int size, u32 *val);
+static int msm_pcie_wr_conf(struct pci_bus *bus, u32 devfn,
+			    int where, int size, u32 val);
+
+static struct pci_ops qcom_pcie_ops = {
+	.read = msm_pcie_rd_conf,
+	.write = msm_pcie_wr_conf,
+};
+
+static struct hw_pci qcom_hw_pci[MAX_RC_NUM] = {
+	{
+#ifdef CONFIG_PCI_DOMAINS
+		.domain = 0,
+#endif
+		.ops		= &qcom_pcie_ops,
+		.nr_controllers	= 1,
+		.swizzle	= pci_common_swizzle,
+		.setup		= qcom_pcie_setup,
+		.map_irq	= qcom_pcie_map_irq,
+	},
+	{
+#ifdef CONFIG_PCI_DOMAINS
+		.domain = 1,
+#endif
+		.ops		= &qcom_pcie_ops,
+		.nr_controllers	= 1,
+		.swizzle	= pci_common_swizzle,
+		.setup		= qcom_pcie_setup,
+		.map_irq	= qcom_pcie_map_irq,
+	},
+	{
+#ifdef CONFIG_PCI_DOMAINS
+		.domain = 2,
+#endif
+		.ops		= &qcom_pcie_ops,
+		.nr_controllers	= 1,
+		.swizzle	= pci_common_swizzle,
+		.setup		= qcom_pcie_setup,
+		.map_irq	= qcom_pcie_map_irq,
+	},
+};
+
+static int nr_controllers;
+static DEFINE_SPINLOCK(qcom_hw_pci_lock);
+
+static inline struct qcom_pcie *sys_to_pcie(struct pci_sys_data *sys)
+{
+	return sys->private_data;
+}
+
+inline int is_msm_pcie_rc(struct pci_bus *bus)
+{
+	return (bus->number == 0);
+}
+
+static int qcom_pcie_is_link_up(struct qcom_pcie *dev)
+{
+	return readl_relaxed(dev->dwc_base + PCIE20_CAP_LINKCTRLSTATUS) & BIT(29);
+}
+
+inline int msm_pcie_get_cfgtype(struct pci_bus *bus)
+{
+	/*
+	 * http://www.tldp.org/LDP/tlk/dd/pci.html
+	 * Pass it onto the secondary bus interface unchanged if the
+	 * bus number specified is greater than the secondary bus
+	 * number and less than or equal to the subordinate bus
+	 * number.
+	 *
+	 * Read/Write to the RC and Device/Switch connected to the RC
+	 * are CFG0 type transactions. Rest have to be forwarded
+	 * down stream as CFG1 transactions.
+	 *
+	 */
+	if (bus->number == 0)
+		return PCI_CFG0_RDWR;
+
+	return PCI_CFG0_RDWR;
+}
+
+void msm_pcie_config_cfgtype(struct pci_bus *bus, u32 devfn)
+{
+	uint32_t bdf, cfgtype;
+	struct qcom_pcie *dev = sys_to_pcie(bus->sysdata);
+
+	cfgtype = msm_pcie_get_cfgtype(bus);
+
+	if (cfgtype == PCI_CFG0_RDWR) {
+		bdf = MSM_PCIE_DEV_CFG_ADDR;
+	} else {
+		/*
+		 * iATU Lower Target Address Register
+		 *	Bits	Description
+		 *	*-1:0	Forms bits [*:0] of the
+		 *		start address of the new
+		 *		address of the translated
+		 *		region. The start address
+		 *		must be aligned to a
+		 *		CX_ATU_MIN_REGION_SIZE kB
+		 *		boundary, so these bits are
+		 *		always 0. A write to this
+		 *		location is ignored by the
+		 *		PCIe core.
+		 *	31:*1	Forms bits [31:*] of the of
+		 *		the new address of the
+		 *		translated region.
+		 *
+		 *	* is log2(CX_ATU_MIN_REGION_SIZE)
+		 */
+		bdf = (((bus->number & 0xff) << 24) & 0xff000000) |
+				(((devfn & 0xff) << 16) & 0x00ff0000);
+	}
+
+	writel_relaxed(0, dev->dwc_base + PCIE20_PLR_IATU_VIEWPORT);
+	wmb();
+
+	/* Program Bdf Address */
+	writel_relaxed(bdf, dev->dwc_base + PCIE20_PLR_IATU_LTAR);
+	wmb();
+
+	/* Write Config Request Type */
+	writel_relaxed(cfgtype, dev->dwc_base + PCIE20_PLR_IATU_CTRL1);
+	wmb();
+}
+
+static inline int msm_pcie_oper_conf(struct pci_bus *bus, u32 devfn, int oper,
+				     int where, int size, u32 *val)
+{
+	uint32_t word_offset, byte_offset, mask;
+	uint32_t rd_val, wr_val;
+	struct qcom_pcie *dev = sys_to_pcie(bus->sysdata);
+	void __iomem *config_base;
+	int rc;
+
+	rc = is_msm_pcie_rc(bus);
+
+	/*
+	 * For downstream bus, make sure link is up
+	 */
+	if (rc && (devfn != 0)) {
+		*val = ~0;
+		return PCIBIOS_DEVICE_NOT_FOUND;
+	} else if ((!rc) && (!qcom_pcie_is_link_up(dev))) {
+		*val = ~0;
+		return PCIBIOS_DEVICE_NOT_FOUND;
+	}
+
+	msm_pcie_config_cfgtype(bus, devfn);
+
+	word_offset = where & ~0x3;
+	byte_offset = where & 0x3;
+	mask = (~0 >> (8 * (4 - size))) << (8 * byte_offset);
+
+	config_base = (rc) ? dev->dwc_base : dev->cfg_base;
+	rd_val = readl_relaxed(config_base + word_offset);
+
+	if (oper == RD) {
+		*val = ((rd_val & mask) >> (8 * byte_offset));
+	} else {
+		wr_val = (rd_val & ~mask) |
+				((*val << (8 * byte_offset)) & mask);
+		writel_relaxed(wr_val, config_base + word_offset);
+		wmb(); /* ensure config data is written to hardware register */
+	}
+
+	return 0;
+}
+
+static int msm_pcie_rd_conf(struct pci_bus *bus, u32 devfn, int where,
+			    int size, u32 *val)
+{
+	return msm_pcie_oper_conf(bus, devfn, RD, where, size, val);
+}
+
+static int msm_pcie_wr_conf(struct pci_bus *bus, u32 devfn,
+			    int where, int size, u32 val)
+{
+	/*
+	 *Attempt to reset secondary bus is causing PCIE core to reset.
+	 *Disable secondary bus reset functionality.
+	 */
+	if ((bus->number == 0) && (where == PCI_BRIDGE_CONTROL) &&
+	    (val & PCI_BRIDGE_CTL_BUS_RESET)) {
+		pr_info("PCIE secondary bus reset not supported\n");
+		val &= ~PCI_BRIDGE_CTL_BUS_RESET;
+	}
+
+	return msm_pcie_oper_conf(bus, devfn, WR, where, size, &val);
+}
+
+static int qcom_pcie_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
+{
+	struct qcom_pcie *pcie_dev = PCIE_BUS_PRIV_DATA(dev);
+
+	return pcie_dev->irq_int[pin-1];
+}
+
+static int qcom_pcie_setup(int nr, struct pci_sys_data *sys)
+{
+	struct qcom_pcie *qcom_pcie = sys->private_data;
+
+	/*
+	 * specify linux PCI framework to allocate device memory (BARs)
+	 * from msm_pcie_dev.dev_mem_res resource.
+	 */
+	sys->mem_offset = 0;
+	sys->io_offset = 0;
+
+	pci_add_resource(&sys->resources, &qcom_pcie->mem);
+	pci_add_resource(&sys->resources, &qcom_pcie->io);
+
+	return 1;
+}
+
+static inline void qcom_elbi_writel_relaxed(struct qcom_pcie *pcie, u32 val, u32 reg)
+{
+	writel_relaxed(val, pcie->elbi_base + reg);
+}
+
+static inline u32 qcom_elbi_readl_relaxed(struct qcom_pcie *pcie, u32 reg)
+{
+	return readl_relaxed(pcie->elbi_base + reg);
+}
+
+static inline void qcom_parf_writel_relaxed(struct qcom_pcie *pcie, u32 val, u32 reg)
+{
+	writel_relaxed(val, pcie->parf_base + reg);
+}
+
+static inline u32 qcom_parf_readl_relaxed(struct qcom_pcie *pcie, u32 reg)
+{
+	return readl_relaxed(pcie->parf_base + reg);
+}
+
+static void msm_pcie_write_mask(void __iomem *addr,
+				uint32_t clear_mask, uint32_t set_mask)
+{
+	uint32_t val;
+
+	val = (readl_relaxed(addr) & ~clear_mask) | set_mask;
+	writel_relaxed(val, addr);
+	wmb();  /* ensure data is written to hardware register */
+}
+
+static void qcom_pcie_config_controller(struct qcom_pcie *dev)
+{
+	/*
+	 * program and enable address translation region 0 (device config
+	 * address space); region type config;
+	 * axi config address range to device config address range
+	 */
+	writel_relaxed(0, dev->dwc_base + PCIE20_PLR_IATU_VIEWPORT);
+	/* ensure that hardware locks the region before programming it */
+	wmb();
+
+	writel_relaxed(4, dev->dwc_base + PCIE20_PLR_IATU_CTRL1);
+	writel_relaxed(BIT(31), dev->dwc_base + PCIE20_PLR_IATU_CTRL2);
+	writel_relaxed(dev->conf.start, dev->dwc_base + PCIE20_PLR_IATU_LBAR);
+	writel_relaxed(0, dev->dwc_base + PCIE20_PLR_IATU_UBAR);
+	writel_relaxed(dev->conf.end, dev->dwc_base + PCIE20_PLR_IATU_LAR);
+	writel_relaxed(MSM_PCIE_DEV_CFG_ADDR,
+		       dev->dwc_base + PCIE20_PLR_IATU_LTAR);
+	writel_relaxed(0, dev->dwc_base + PCIE20_PLR_IATU_UTAR);
+	/* ensure that hardware registers the configuration */
+	wmb();
+
+	/*
+	 * program and enable address translation region 2 (device resource
+	 * address space); region type memory;
+	 * axi device bar address range to device bar address range
+	 */
+	writel_relaxed(2, dev->dwc_base + PCIE20_PLR_IATU_VIEWPORT);
+	/* ensure that hardware locks the region before programming it */
+	wmb();
+
+	writel_relaxed(0, dev->dwc_base + PCIE20_PLR_IATU_CTRL1);
+	writel_relaxed(BIT(31), dev->dwc_base + PCIE20_PLR_IATU_CTRL2);
+	writel_relaxed(dev->mem.start, dev->dwc_base + PCIE20_PLR_IATU_LBAR);
+	writel_relaxed(0, dev->dwc_base + PCIE20_PLR_IATU_UBAR);
+	writel_relaxed(dev->mem.end, dev->dwc_base + PCIE20_PLR_IATU_LAR);
+	writel_relaxed(dev->mem.start,
+		       dev->dwc_base + PCIE20_PLR_IATU_LTAR);
+	writel_relaxed(0, dev->dwc_base + PCIE20_PLR_IATU_UTAR);
+	/* ensure that hardware registers the configuration */
+	wmb();
+
+	/* 1K PCIE buffer setting */
+	writel_relaxed(0x3, dev->dwc_base + PCIE20_AXI_MSTR_RESP_COMP_CTRL0);
+	writel_relaxed(0x1, dev->dwc_base + PCIE20_AXI_MSTR_RESP_COMP_CTRL1);
+	/* ensure that hardware registers the configuration */
+	wmb();
+}
+
+static int qcom_pcie_probe(struct platform_device *pdev)
+{
+	unsigned long flags;
+	struct qcom_pcie *qcom_pcie;
+	struct device_node *np = pdev->dev.of_node;
+	struct resource *elbi_base, *parf_base, *dwc_base;
+	struct hw_pci *hw;
+	struct of_pci_range range;
+	struct of_pci_range_parser parser;
+	int ret, i;
+	u32 val;
+
+	qcom_pcie = devm_kzalloc(&pdev->dev, sizeof(*qcom_pcie), GFP_KERNEL);
+	if (!qcom_pcie) {
+		dev_err(&pdev->dev, "no memory for qcom_pcie\n");
+		return -ENOMEM;
+	}
+
+	elbi_base = platform_get_resource_byname(pdev, IORESOURCE_MEM, "elbi");
+	qcom_pcie->elbi_base = devm_ioremap_resource(&pdev->dev, elbi_base);
+	if (IS_ERR(qcom_pcie->elbi_base)) {
+		dev_err(&pdev->dev, "Failed to ioremap elbi space\n");
+		return PTR_ERR(qcom_pcie->elbi_base);
+	}
+
+	parf_base = platform_get_resource_byname(pdev, IORESOURCE_MEM, "parf");
+	qcom_pcie->parf_base = devm_ioremap_resource(&pdev->dev, parf_base);
+	if (IS_ERR(qcom_pcie->parf_base)) {
+		dev_err(&pdev->dev, "Failed to ioremap parf space\n");
+		return PTR_ERR(qcom_pcie->parf_base);
+	}
+
+	dwc_base = platform_get_resource_byname(pdev, IORESOURCE_MEM, "base");
+	qcom_pcie->dwc_base = devm_ioremap_resource(&pdev->dev, dwc_base);
+	if (IS_ERR(qcom_pcie->dwc_base)) {
+		dev_err(&pdev->dev, "Failed to ioremap dwc_base space\n");
+		return PTR_ERR(qcom_pcie->dwc_base);
+	}
+
+	if (of_pci_range_parser_init(&parser, np)) {
+		dev_err(&pdev->dev, "missing ranges property\n");
+		return -EINVAL;
+	}
+
+	/* Get the I/O and memory ranges from DT */
+	for_each_of_pci_range(&parser, &range) {
+		switch (range.pci_space & 0x3) {
+		case 0:		/* cfg */
+			of_pci_range_to_resource(&range, np, &qcom_pcie->conf);
+			qcom_pcie->conf.flags = IORESOURCE_MEM;
+			break;
+		case 1:		/* io */
+			of_pci_range_to_resource(&range, np, &qcom_pcie->io);
+			break;
+		default:	/* mem */
+			of_pci_range_to_resource(&range, np, &qcom_pcie->mem);
+			break;
+		}
+	}
+
+	qcom_pcie->cfg_base = devm_ioremap_resource(&pdev->dev, &qcom_pcie->conf);
+	if (IS_ERR(qcom_pcie->cfg_base)) {
+		dev_err(&pdev->dev, "Failed to ioremap PCIe cfg space\n");
+		return PTR_ERR(qcom_pcie->cfg_base);
+        }
+
+	qcom_pcie->reset_gpio = of_get_named_gpio(np, "reset-gpio", 0);
+	if (!gpio_is_valid(qcom_pcie->reset_gpio)) {
+		dev_err(&pdev->dev, "pcie reset gpio is not valid\n");
+		return -EINVAL;
+	}
+
+	ret = devm_gpio_request_one(&pdev->dev, qcom_pcie->reset_gpio,
+				    GPIOF_DIR_OUT, "pcie_reset");
+	if (ret) {
+		dev_err(&pdev->dev, "Failed to request pcie reset gpio\n");
+		return ret;
+	}
+
+	qcom_pcie->iface_clk = devm_clk_get(&pdev->dev, "iface");
+	if (IS_ERR(qcom_pcie->iface_clk)) {
+		dev_err(&pdev->dev, "Failed to get pcie iface clock\n");
+		return PTR_ERR(qcom_pcie->iface_clk);
+	}
+
+	qcom_pcie->phy_clk = devm_clk_get(&pdev->dev, "phy");
+	if (IS_ERR(qcom_pcie->phy_clk)) {
+		dev_err(&pdev->dev, "Failed to get pcie phy clock\n");
+		return PTR_ERR(qcom_pcie->phy_clk);
+	}
+
+	qcom_pcie->bus_clk = devm_clk_get(&pdev->dev, "core");
+	if (IS_ERR(qcom_pcie->bus_clk)) {
+		dev_err(&pdev->dev, "Failed to get pcie core clock\n");
+		return PTR_ERR(qcom_pcie->bus_clk);
+	}
+
+	qcom_pcie->axi_reset = devm_reset_control_get(&pdev->dev, "axi");
+	if (IS_ERR(qcom_pcie->axi_reset)) {
+		dev_err(&pdev->dev, "Failed to get axi reset\n");
+		return PTR_ERR(qcom_pcie->axi_reset);
+	}
+
+	qcom_pcie->ahb_reset = devm_reset_control_get(&pdev->dev, "ahb");
+	if (IS_ERR(qcom_pcie->ahb_reset)) {
+		dev_err(&pdev->dev, "Failed to get ahb reset\n");
+		return PTR_ERR(qcom_pcie->ahb_reset);
+	}
+
+	qcom_pcie->por_reset = devm_reset_control_get(&pdev->dev, "por");
+	if (IS_ERR(qcom_pcie->por_reset)) {
+		dev_err(&pdev->dev, "Failed to get por reset\n");
+		return PTR_ERR(qcom_pcie->por_reset);
+	}
+
+	qcom_pcie->pci_reset = devm_reset_control_get(&pdev->dev, "pci");
+	if (IS_ERR(qcom_pcie->pci_reset)) {
+		dev_err(&pdev->dev, "Failed to get pci reset\n");
+		return PTR_ERR(qcom_pcie->pci_reset);
+	}
+
+	qcom_pcie->phy_reset = devm_reset_control_get(&pdev->dev, "phy");
+	if (IS_ERR(qcom_pcie->phy_reset)) {
+		dev_err(&pdev->dev, "Failed to get phy reset\n");
+		return PTR_ERR(qcom_pcie->phy_reset);
+	}
+
+	for (i = 0; i < 4; i++) {
+		qcom_pcie->irq_int[i] = platform_get_irq(pdev, i+1);
+		if (qcom_pcie->irq_int[i] < 0) {
+			dev_err(&pdev->dev, "failed to get irq resource\n");
+			return qcom_pcie->irq_int[i];
+		}
+	}
+
+	gpio_set_value(qcom_pcie->reset_gpio, 0);
+	usleep_range(10000, 15000);
+
+	/* assert PCIe PARF reset while powering the core */
+	reset_control_assert(qcom_pcie->ahb_reset);
+
+	/* enable clocks */
+	ret = clk_prepare_enable(qcom_pcie->iface_clk);
+	if (ret)
+		return ret;
+	ret = clk_prepare_enable(qcom_pcie->phy_clk);
+	if (ret)
+		return ret;
+	ret = clk_prepare_enable(qcom_pcie->bus_clk);
+	if (ret)
+		return ret;
+
+	/*
+	 * de-assert PCIe PARF reset;
+	 * wait 1us before accessing PARF registers
+	 */
+	reset_control_deassert(qcom_pcie->ahb_reset);
+	udelay(1);
+
+	/* enable PCIe clocks and resets */
+	msm_pcie_write_mask(qcom_pcie->parf_base + PCIE20_PARF_PHY_CTRL, BIT(0), 0);
+
+	/* Set Tx Termination Offset */
+	val = qcom_parf_readl_relaxed(qcom_pcie, PCIE20_PARF_PHY_CTRL);
+	val |= PCIE20_PARF_PHY_CTRL_PHY_TX0_TERM_OFFST(7);
+	qcom_parf_writel_relaxed(qcom_pcie, val, PCIE20_PARF_PHY_CTRL);
+
+	/* PARF programming */
+	qcom_parf_writel_relaxed(qcom_pcie, PCIE20_PARF_PCS_DEEMPH_TX_DEEMPH_GEN1(0x18) |
+			PCIE20_PARF_PCS_DEEMPH_TX_DEEMPH_GEN2_3_5DB(0x18) |
+			PCIE20_PARF_PCS_DEEMPH_TX_DEEMPH_GEN2_6DB(0x22),
+			PCIE20_PARF_PCS_DEEMPH);
+	qcom_parf_writel_relaxed(qcom_pcie, PCIE20_PARF_PCS_SWING_TX_SWING_FULL(0x78) |
+			PCIE20_PARF_PCS_SWING_TX_SWING_LOW(0x78),
+			PCIE20_PARF_PCS_SWING);
+	qcom_parf_writel_relaxed(qcom_pcie, (4<<24), PCIE20_PARF_CONFIG_BITS);
+	/* ensure that hardware registers the PARF configuration */
+	wmb();
+
+	/* enable reference clock */
+	msm_pcie_write_mask(qcom_pcie->parf_base + PCIE20_PARF_PHY_REFCLK, BIT(12), BIT(16));
+
+	/* ensure that access is enabled before proceeding */
+	wmb();
+
+	/* de-assert PICe PHY, Core, POR and AXI clk domain resets */
+	reset_control_deassert(qcom_pcie->phy_reset);
+	reset_control_deassert(qcom_pcie->pci_reset);
+	reset_control_deassert(qcom_pcie->por_reset);
+	reset_control_deassert(qcom_pcie->axi_reset);
+
+	/* wait 150ms for clock acquisition */
+	usleep_range(10000, 15000);
+
+	/* de-assert PCIe reset link to bring EP out of reset */
+	gpio_set_value(qcom_pcie->reset_gpio, 1 - 0);
+	usleep_range(10000, 15000);
+
+	/* enable link training */
+	val = qcom_elbi_readl_relaxed(qcom_pcie, PCIE20_ELBI_SYS_CTRL);
+	val |= PCIE20_ELBI_SYS_CTRL_LTSSM_EN;
+	qcom_elbi_writel_relaxed(qcom_pcie, val, PCIE20_ELBI_SYS_CTRL);
+	wmb();
+
+	/* poll for link to come up for upto 100ms */
+	ret = readl_poll_timeout(
+			(qcom_pcie->dwc_base + PCIE20_CAP_LINKCTRLSTATUS),
+			val, (val & BIT(29)), 10000, 100000);
+
+	printk("link initialized %d\n", ret);
+
+	qcom_pcie_config_controller(qcom_pcie);
+
+	platform_set_drvdata(pdev, qcom_pcie);
+
+	spin_lock_irqsave(&qcom_hw_pci_lock, flags);
+	qcom_hw_pci[nr_controllers].private_data = (void **)&qcom_pcie;
+	hw = &qcom_hw_pci[nr_controllers];
+	nr_controllers++;
+	spin_unlock_irqrestore(&qcom_hw_pci_lock, flags);
+
+	pci_common_init(hw);
+
+	return 0;
+}
+
+static int __exit qcom_pcie_remove(struct platform_device *pdev)
+{
+	struct qcom_pcie *qcom_pcie = platform_get_drvdata(pdev);
+
+	return 0;
+}
+
+static struct of_device_id qcom_pcie_match[] = {
+	{	.compatible = "qcom,pcie-ipq8064", },
+	{}
+};
+
+static struct platform_driver qcom_pcie_driver = {
+	.probe	= qcom_pcie_probe,
+	.remove	= qcom_pcie_remove,
+	.driver	= {
+		.name		= "qcom_pcie",
+		.owner		= THIS_MODULE,
+		.of_match_table	= qcom_pcie_match,
+	},
+};
+
+static int qcom_pcie_init(void)
+{
+	return platform_driver_register(&qcom_pcie_driver);
+}
+subsys_initcall(qcom_pcie_init);
+
+/* RC do not represent the right class; set it to PCI_CLASS_BRIDGE_PCI */
+static void msm_pcie_fixup_early(struct pci_dev *dev)
+{
+	if (dev->hdr_type == 1)
+		dev->class = (dev->class & 0xff) | (PCI_CLASS_BRIDGE_PCI << 8);
+}
+DECLARE_PCI_FIXUP_EARLY(PCIE_VENDOR_ID_RCP, PCIE_DEVICE_ID_RCP, msm_pcie_fixup_early);