openwrt-owl/target/linux/oxnas/base-files/etc/board.d/02_network

#!/bin/sh

. /lib/functions/uci-defaults.sh
. /lib/functions/system.sh

board_config_update

ifname=eth0

ucidef_set_interface_lan "eth0" "dhcp"

board_config_flush

exit 0
add new target 'oxnas' This is the oxnas target previously developed at http://gitorious.org/openwrt-oxnas Basically, this consolidates the changes and addtionas from http://github.org/kref/linux-oxnas into a new OpenWrt hardware target 'oxnas' adding support for PLX Technology NAS7820/NAS7821/NAS7825/... formally known as Oxford Semiconductor OXE810SE/OXE815/OX820/... For now there are 4 supported boards: Cloud Engines Pogoplug V3 (without PCIe) fully supported Cloud Engines Pogoplug Pro (with PCIe) fully supported MitraStar STG-212 aka ZyXEL NSA-212, aka Medion Akoya P89625 / P89636 / P89626 / P89630, aka Medion MD 86407 / MD 86805 / MD 86517 / MD 86587 fully supported, see http://wiki.openwrt.org/toh/medion/md86587 Shuttle KD-20 partially supported (S-ATA driver lacks support for 2nd port) Signed-off-by: Daniel Golle <daniel@makrotopia.org> SVN-Revision: 43388 2014-11-26 09:00:08 +00:00			`#!/bin/sh`

all: drop old uci-defaults.sh Replace former uci-defaults.sh implementation with the uci-defaults-new.sh one and update all users accordingly. Signed-off-by: Jo-Philipp Wich <jow@openwrt.org> SVN-Revision: 47867 2015-12-11 15:26:06 +00:00			`. /lib/functions/uci-defaults.sh`
add new target 'oxnas' This is the oxnas target previously developed at http://gitorious.org/openwrt-oxnas Basically, this consolidates the changes and addtionas from http://github.org/kref/linux-oxnas into a new OpenWrt hardware target 'oxnas' adding support for PLX Technology NAS7820/NAS7821/NAS7825/... formally known as Oxford Semiconductor OXE810SE/OXE815/OX820/... For now there are 4 supported boards: Cloud Engines Pogoplug V3 (without PCIe) fully supported Cloud Engines Pogoplug Pro (with PCIe) fully supported MitraStar STG-212 aka ZyXEL NSA-212, aka Medion Akoya P89625 / P89636 / P89626 / P89630, aka Medion MD 86407 / MD 86805 / MD 86517 / MD 86587 fully supported, see http://wiki.openwrt.org/toh/medion/md86587 Shuttle KD-20 partially supported (S-ATA driver lacks support for 2nd port) Signed-off-by: Daniel Golle <daniel@makrotopia.org> SVN-Revision: 43388 2014-11-26 09:00:08 +00:00			`. /lib/functions/system.sh`

			`board_config_update`

oxnas: set preinit interface in /etc/board.d/02_network Signed-off-by: Daniel Golle <daniel@makrotopia.org> 2016-08-15 00:47:39 +00:00			`ifname=eth0`

oxnas: use DHCP by default on ethernet interface (lan) Signed-off-by: Daniel Golle <daniel@makrotopia.org> 2016-07-18 17:37:43 +00:00			`ucidef_set_interface_lan "eth0" "dhcp"`
add new target 'oxnas' This is the oxnas target previously developed at http://gitorious.org/openwrt-oxnas Basically, this consolidates the changes and addtionas from http://github.org/kref/linux-oxnas into a new OpenWrt hardware target 'oxnas' adding support for PLX Technology NAS7820/NAS7821/NAS7825/... formally known as Oxford Semiconductor OXE810SE/OXE815/OX820/... For now there are 4 supported boards: Cloud Engines Pogoplug V3 (without PCIe) fully supported Cloud Engines Pogoplug Pro (with PCIe) fully supported MitraStar STG-212 aka ZyXEL NSA-212, aka Medion Akoya P89625 / P89636 / P89626 / P89630, aka Medion MD 86407 / MD 86805 / MD 86517 / MD 86587 fully supported, see http://wiki.openwrt.org/toh/medion/md86587 Shuttle KD-20 partially supported (S-ATA driver lacks support for 2nd port) Signed-off-by: Daniel Golle <daniel@makrotopia.org> SVN-Revision: 43388 2014-11-26 09:00:08 +00:00
			`board_config_flush`

			`exit 0`