openwrt-owl/openwrt/target/linux/Config.in

choice
	prompt "Target system"
	
config BR2_LINUX_2_4_BRCM
	bool "Support for Broadcom based routers [2.4]"
	default y
	depends BR2_mipsel
	help
	  Build firmware images for Broadcom based routers
	  (e.g. Linksys WRT54G(S), Asus WL-500g, Motorola WR850G)
	  
	  This one builds the generic .trx images, activate one of the
	  options below for creating device specific files for use 
	  with TFTP client too. 

config BR2_LINUX_2_4_AR7
	bool "Support for TI AR7 based devices [2.4]"
	default n
	depends BR2_mipsel
	help
	  Build firmware images for TI AR7 based routers (w.g. Linksys WAG54G v2)

config BR2_LINUX_2_4_X86
	bool "Support for x86 boards [2.4]"
	default n
	depends BR2_i386
	help
	  Build firmware images for x86 based boards
	  (e.g. Soekris net4521 and net4801, PC Engines WRAP...)
	 
config BR2_LINUX_2_6_BRCM
	bool "Support for Broadcom based routers [2.6]"
	default n
	depends BR2_mipsel
	help
	  Build firmware images for Broadcom based routers
	  (e.g. Netgear WGT634u)
	
endchoice
	
comment "Kernel Modules"

config BR2_PACKAGE_KMOD_SANGAM_ATM_A
	tristate "AR7 Sangam ADSL Driver (Annex A)"
	default m
	depends BR2_LINUX_2_4_AR7
	select BR2_PACKAGE_KMOD_ATM
	help
	  ATM driver for the Sangam ADSL chip on AR7
	  Annex A version

config BR2_PACKAGE_KMOD_SANGAM_ATM_B
	tristate "AR7 Sangam ADSL Driver (Annex B)"
	default y
	depends BR2_LINUX_2_4_AR7
	select BR2_PACKAGE_KMOD_ATM
	help
	  ATM driver for the Sangam ADSL chip on AR7
	  Annex B version

config BR2_PACKAGE_KMOD_CPMAC
	tristate "AR7 CPMAC Network Driver"
	default y
	depends BR2_LINUX_2_4_AR7
	help
	  Driver for the AR7 CPMAC network chip

config BR2_PACKAGE_KMOD_BRCM_WL
	tristate "Broadcom Wireless Network Driver"
	depends BR2_LINUX_2_4_BRCM
	default y
	help
	  Proprietary driver for Broadcom Wireless chipsets

config BR2_PACKAGE_KMOD_BRCM_ET
	tristate "Broadcom Ethernet Driver"
	depends BR2_LINUX_2_4_BRCM
	default y
	help
	  Proprietary driver for Broadcom Ethernet chipsets

comment "Networking modules ------------"

config BR2_PACKAGE_KMOD_ATM
	tristate "kmod-atm....................... ATM support"
	default y if BR2_LINUX_2_4_AR7
	help
	  ATM support

config BR2_PACKAGE_KMOD_GRE
	tristate "kmod-gre....................... GRE tunneling driver"
	default m
	help
	  Kernel support for GRE tunnels

config BR2_PACKAGE_KMOD_IPV6
	tristate "kmod-ipv6...................... IPv6 support"
	default m
	help
	  Kernel modules for IPv6 protocol support
	  
config BR2_PACKAGE_KMOD_PPP
	tristate "kmod-ppp....................... PPP support"
	default m
	help
	  Kernel support for PPP

config BR2_PACKAGE_KMOD_MPPE
	tristate   "kmod-mppe.................... PPP MPPE/MPPC module"
	default m
	depends BR2_PACKAGE_KMOD_PPP
	select BR2_PACKAGE_KMOD_CRYPTO
	help
	  Support for Microsoft PPP Encryption/Compression

config BR2_PACKAGE_KMOD_PPPOE
	tristate   "kmod-pppoe................... PPPoE (PPP over Ethernet) kernel support"
	default m
	depends BR2_PACKAGE_KMOD_PPP
	help
	  Support for PPP over Ethernet

config BR2_PACKAGE_KMOD_PPPOATM
	tristate   "kmod-pppoatm................. PPPoA (PPP over ATM) kernel support"
	default y if BR2_LINUX_2_4_AR7
	default m
	depends BR2_PACKAGE_KMOD_PPP
	select BR2_PACKAGE_KMOD_ATM
	help
	  Support for PPP over ATM

config BR2_PACKAGE_KMOD_SCHED
	tristate "kmod-sched..................... Traffic schedulers"
	default m
	help
	  Kernel schedulers for IP traffic

config BR2_PACKAGE_KMOD_TUN
	tristate "kmod-tun....................... Universal TUN/TAP driver"
	default m
	help
	  Kernel support for the TUN/TAP tunneling device


comment "Filtering/Firewalling ---------"

config BR2_PACKAGE_KMOD_ARPTABLES
	tristate "kmod-arptables................. ARP firewalling support"
	default m
	help
	  Kernel modules for ARP firewalling

config BR2_PACKAGE_KMOD_EBTABLES
	tristate "kmod-ebtables.................. Ethernet Bridge firewalling support"
	default m
	help
	  Kernel modules for bridge firewalling

config BR2_PACKAGE_KMOD_IPTABLES_V4
	tristate "kmod-iptables.................. Basic set of kernel modules for iptables"
	default y
	help
	  Kernel modules for IPv4 firewalling

config BR2_PACKAGE_KMOD_IPTABLES_V4_EXTRA
	tristate "kmod-iptables-extra............ Extra modules for iptables"
	default m
	help
	  Extra kernel modules for IPv4 firewalling

config BR2_PACKAGE_KMOD_IPTABLES_V6
	tristate "kmod-ip6tables................. Kernel modules for ip6tables"
	default m
	depends BR2_PACKAGE_KMOD_IPV6
	help
	  IPv6 firewalling support

comment "Block devices support ---------"

config BR2_PACKAGE_KMOD_IDE
	tristate "kmod-ide....................... IDE support"
	default m
	help
	  Kernel modules for IDE support
	  useful for usb mass storage devices (e.g. on WL-HDD)
	  

config BR2_PACKAGE_KMOD_LOOP
	tristate "kmod-loop...................... loop mount support"
	default m
	help
	  Kernel module for loop mount support
	  

config BR2_PACKAGE_KMOD_NBD
	tristate "kmod-nbd....................... network block device"
	default m
	help
	  Kernel module for network block device
	  

comment "Cryptographic support ---------"

config BR2_PACKAGE_KMOD_CRYPTO
	tristate "kmod-crypto.................... CryptoAPI modules"
	default m
	select BUSYBOX_CONFIG_FEATURE_CHECK_TAINTED_MODULE
	help
	  Kernel modules for cryptographic algorithms
	  

comment "Filesystems support -----------"

config BR2_PACKAGE_KMOD_CIFS
	tristate "kmod-fs-cifs................... CIFS support"
	default m
	help
	  Kernel modules for CIFS support
	  

config BR2_PACKAGE_KMOD_FS_EXT2
	tristate "kmod-fs-ext2................... EXT2 filesystem support"
	default m
	help
	  Kernel modules for EXT2 filesystem support
	  

config BR2_PACKAGE_KMOD_FS_EXT3
	tristate "kmod-fs-ext3................... EXT3 filesystem support"
	default m
	help
	  Kernel modules for EXT3 filesystem support
	  

config BR2_PACKAGE_KMOD_FS_HFSPLUS
	tristate "kmod-fs-hfsplus................ HFS+ filesystem support"
	default m
	help
	  Kernel modules for HFS+ filesystem support
	  

config BR2_PACKAGE_KMOD_FS_NFS
	tristate "kmod-fs-nfs.................... NFS support"
	default m
	help
	  Kernel modules for NFS support
	  Includes lockd, nfs and sunrpc

config BR2_PACKAGE_KMOD_FS_VFAT
	tristate "kmod-fs-vfat................... VFAT filesystem support"
	default m
	help
	  Kernel modules for VFAT filesystem support
	  useful for usb mass storage devices

config BR2_PACKAGE_KMOD_FS_XFS
	tristate "kmod-fs-xfs.................... XFS filesystem support"
	default m
	help
	  Kernel modules for XFS filesystem support

comment "Multimedia devices support ----"

config BR2_PACKAGE_KMOD_PWC
	tristate "kmod-pwc....................... Kernel driver for USB Philips Cameras"
	default m

config BR2_PACKAGE_KMOD_SOUNDCORE
	tristate "kmod-soundcore................. Soundcard support"
	default n
	help
	  Base support for soundcards
	  Requires either USB soundcard support (OSS) or ALSA package to be useful

config BR2_PACKAGE_KMOD_VIDEODEV
	tristate "kmod-videodev.................. Video (For Linux) kernel support"
	default m

comment "Native Language support -------"

config BR2_PACKAGE_KMOD_NLS_CP437
	tristate "kmod-nls-cp437................. Codepage 437 (United States, Canada)"
	default m
	select BR2_PACKAGE_KMOD_NLS
	help
	  Kernel native language support

config BR2_PACKAGE_KMOD_NLS_CP850
	tristate "kmod-nls-cp850................. Codepage 850 (Europe)"
	default m
	select BR2_PACKAGE_KMOD_NLS
	help
	  Kernel native language support

config BR2_PACKAGE_KMOD_NLS_IS08859_1
	tristate "kmod-nls-iso8859-1............. NLS ISO 8859-1  (Latin 1; Western European Languages)"
	default m
	select BR2_PACKAGE_KMOD_NLS
	help
	  Kernel native language support

config BR2_PACKAGE_KMOD_NLS_IS08859_15
	tristate "kmod-nls-iso8859-15............ NLS ISO 8859-15  (Latin 15; Western European Languages with Euro)"
	default m
	select BR2_PACKAGE_KMOD_NLS
	help
	  Kernel native language support

config BR2_PACKAGE_KMOD_NLS_UTF8
	tristate "kmod-nls-utf8.................. NLS UTF8"
	default m
	select BR2_PACKAGE_KMOD_NLS
	help
	  Kernel native language support

config BR2_PACKAGE_KMOD_NLS
	tristate
	default m
	depends BR2_PACKAGE_KMOD_NLS_CP437 || BR2_PACKAGE_KMOD_NLS_CP850 || BR2_PACKAGE_KMOD_NLS_IS08859_1 || BR2_PACKAGE_KMOD_NLS_IS08859_15 || BR2_PACKAGE_KMOD_NLS_UTF8
	help
	  Kernel native language support

comment "Network devices support -------"

config BR2_PACKAGE_KMOD_NET_3C59X
	tristate "kmod-net-3C59x................. 3Com 3c590/3c900 series (592/595/597) \"Vortex/Boomerang\" Ethernet kernel support"
	default m
	help
	  This option enables driver support for a large number of 10mbps and 
	  10/100mbps EISA, PCI and PCMCIA 3Com network cards:
	  
	   * "Vortex"    (Fast EtherLink 3c590/3c592/3c595/3c597) EISA and PCI
	   * "Boomerang" (EtherLink XL 3c900 or 3c905)            PCI
	   * "Cyclone"   (3c540/3c900/3c905/3c980/3c575/3c656)    PCI and Cardbus
	   * "Tornado"   (3c905)                                  PCI
	   * "Hurricane" (3c555/3cSOHO)                           PCI
	  
	  This package contains the 3c59x.o kernel module.
	  

config BR2_PACKAGE_KMOD_NET_8139TOO
	tristate "kmod-net-8139too............... RealTek RTL-8139 PCI Fast Ethernet Adapter kernel support"
	default m
	help
	  This is a driver for the Fast Ethernet PCI network cards based on 
	  the RTL8139 chips.
	  
	  This package contains the 8139too.o and mii.o kernel modules.
	  

config BR2_PACKAGE_KMOD_NET_AIRO
	tristate "kmod-net-airo.................. Cisco/Aironet 34X/35X/4500/4800 ISA and PCI cards kernel support"
	default m
	help
	  This is the standard Linux driver to support Cisco/Aironet ISA and 
	  PCI 802.11 wireless cards.
	  It supports the new 802.11b cards from Cisco (Cisco 34X, Cisco 35X 
	  - with or without encryption) as well as card before the Cisco 
	  acquisition (Aironet 4500, Aironet 4800, Aironet 4800B).
	  
	  This driver support both the standard Linux Wireless Extensions 
	  and Cisco proprietary API, so both the Linux Wireless Tools and the 
	  Cisco Linux utilities can be used to configure the card.
	  
	  This package contains the airo.o kernel module.
	  

config BR2_PACKAGE_KMOD_E100
	tristate "kmod-net-e100.................. Intel(R) PRO/100+ cards kernel support"
	default m
	help
	  Intel(R) PRO/100+ cards kernel support

config BR2_PACKAGE_KMOD_B44
	tristate "kmod-net-b44................... Broadcom 44XX, 47XX ethernet driver"
	default m
	default y if BR2_LINUX_2_6_BRCM
	help
	  Free driver for Broadcom Ethernet chipsets (without switch support)
	  

config BR2_PACKAGE_KMOD_NET_HERMES
	tristate "kmod-net-hermes................ Hermes chipset 802.11b support (Orinoco/Prism2/Symbol) kernel support"
	default m
	help
	  A driver for 802.11b wireless cards based based on the "Hermes" or 
	  Intersil HFA384x (Prism 2) MAC controller.  This includes the vast 
	  majority of the PCMCIA 802.11b cards (which are nearly all rebadges) 
	  - except for the Cisco/Aironet cards.  Cards supported include the 
	  Apple Airport (not a PCMCIA card), WavelanIEEE/Orinoco, 
	  Cabletron/EnteraSys Roamabout, ELSA AirLancer, MELCO Buffalo, Avaya, 
	  IBM High Rate Wireless, Farralon Syyline, Samsung MagicLAN, Netgear 
	  MA401, LinkSys WPC-11, D-Link DWL-650, 3Com AirConnect, Intel 
	  PRO/Wireless, and Symbol Spectrum24 High Rate amongst others.
	  
	  This package contains the hermes.o and orinoco.o kernel modules.
	  

config BR2_PACKAGE_KMOD_NET_HERMES_PCI
	tristate   "kmod-net-hermes-pci.......... Intersil Prism 2.5 PCI 802.11b adaptor support"
	default m
	depends BR2_PACKAGE_KMOD_NET_HERMES
	help
	  Enable support for PCI and mini-PCI 802.11b wireless NICs based on 
	  the Prism 2.5 chipset.  These are true PCI cards, not the 802.11b 
	  PCMCIA cards bundled with PCI<->PCMCIA adaptors which are also 
	  common.  Some of the built-in wireless adaptors in laptops are of 
	  this variety.
	  
	  This package contains the orinoco_pci.o kernel module.
	  

config BR2_PACKAGE_KMOD_NET_HERMES_PLX
	tristate   "kmod-net-hermes-plx.......... Hermes in PLX9052 based PCI adaptor (Netgear MA301, etc.) kernel support"
	default m
	depends BR2_PACKAGE_KMOD_NET_HERMES
	help
	  Enable support for PCMCIA cards supported by the "Hermes" (aka 
	  orinoco_cs) driver when used in PLX9052 based PCI adaptors.  These 
	  adaptors are not a full PCMCIA controller but act as a more limited 
	  PCI <-> PCMCIA bridge.  Several vendors sell such adaptors so that 
	  802.11b PCMCIA cards can be used in desktop machines.  The Netgear 
	  MA301 is such an adaptor.
	  
	  This package contains the orinoco_plx.o kernel module.
	  

config BR2_PACKAGE_KMOD_NET_NATSEMI
	tristate "kmod-net-natsemi............... National Semiconductor DP8381x series PCI Ethernet kernel support"
	default m
	help
	  This driver is for the National Semiconductor DP83810 series, 
	  which is used in cards from PureData, NetGear, Linksys 
	  and others, including the 83815 chip.
	  
	  This package contains the natsemi.o kernel module.
	  

config BR2_PACKAGE_KMOD_NET_PRISM54
	tristate "kmod-net-prism54............... Intersil Prism GT/Duette/Indigo PCI/PCMCIA cards kernel support"
	default m
	help
	  Enable PCI and Cardbus support for the following chipset based cards: 
	  
	   * ISL3880 - Prism GT       802.11 b/g
	   * ISL3877 - Prism Indigo   802.11 a
	   * ISL3890 - Prism Duette   802.11 a/b/g
	  
	  For a complete list of supported cards visit <http://prism54.org>.
	  Here is the latest confirmed list of supported cards: 
	  
	   * 3com OfficeConnect 11g Cardbus Card aka 3CRWE154G72
	   * Allnet ALL0271 PCI Card
	   * Compex WL54G Cardbus Card
	   * Corega CG-WLCB54GT Cardbus Card
	   * D-Link Air Plus Xtreme G A1 Cardbus Card aka DWL-g650
	   * I-O Data WN-G54/CB Cardbus Card
	   * Kobishi XG-300 aka Z-Com Cardbus Card
	   * Netgear WG511 Cardbus Card
	   * Ovislink WL-5400PCI PCI Card
	   * Peabird WLG-PCI PCI Card
	   * Sitecom WL-100i Cardbus Card
	   * Sitecom WL-110i PCI Card
	   * SMC2802W - EZ Connect g 2.4GHz 54 Mbps Wireless PCI Card
	   * SMC2835W - EZ Connect g 2.4GHz 54 Mbps Wireless Cardbus Card
	   * Z-Com XG-900 PCI Card
	   * Zyxel G-100 Cardbus Card
	  
	  If you enable this, you require a firmware file as well.
	  You will need to copy this to /usr/lib/hotplug/firmware/isl3890.
	  You can get this non-GPL'd firmware file from the Prism54 project page: 
	  <http://prism54.org>.
	  
	  Note: You need a motherboard with DMA support to use any of these cards.
	  
	  This package contains the prism54.o kernel module.
	  

comment "PCMCIA/CardBus support --------"

config BR2_PACKAGE_KMOD_PCMCIA_CORE
	tristate "kmod-pcmcia-core............... PCMCIA/CardBus support"
	default m

comment "USB support -------------------"

config BR2_PACKAGE_KMOD_USB
	tristate "kmod-usb-core.................. USB support"
	default m

config BR2_PACKAGE_KMOD_USB_UHCI
	tristate   "kmod-usb-uhci................ Support for UHCI controllers"
	default m
	depends BR2_PACKAGE_KMOD_USB
	select BR2_PACKAGE_KMOD_USB_CONTROLLER

config BR2_PACKAGE_KMOD_USB_OHCI
	tristate   "kmod-usb-ohci................ Support for OHCI controllers"
	default m
	depends BR2_PACKAGE_KMOD_USB
	select BR2_PACKAGE_KMOD_USB_CONTROLLER

config BR2_PACKAGE_KMOD_USB2
	tristate   "kmod-usb2.................... Support for USB 2.0 controllers"
	default m
	depends BR2_PACKAGE_KMOD_USB
	select BR2_PACKAGE_KMOD_USB_CONTROLLER

config BR2_PACKAGE_KMOD_USB_CONTROLLER
	tristate
	depends on BR2_PACKAGE_KMOD_USB_UHCI || BR2_PACKAGE_KMOD_USB_OHCI || BR2_PACKAGE_KMOD_USB2
	default n

config BR2_PACKAGE_KMOD_USB_ACM
	tristate "kmod-usb-acm................... Support for USB modems/isdn controllers"
	default m
	depends BR2_PACKAGE_KMOD_USB_CONTROLLER

config BR2_PACKAGE_KMOD_USB_AUDIO
	tristate "kmod-usb-audio................. Support for USB soundcards"
	default m
	depends BR2_PACKAGE_KMOD_USB_CONTROLLER
	select BR2_PACKAGE_KMOD_SOUNDCORE

config BR2_PACKAGE_KMOD_USB_PRINTER
	tristate "kmod-usb-printer............... Support for USB printers"
	default m
	depends BR2_PACKAGE_KMOD_USB_CONTROLLER

config BR2_PACKAGE_KMOD_USB_SERIAL
	tristate "kmod-usb-serial................ Support for USB-to-serial converters"
	default m
	depends BR2_PACKAGE_KMOD_USB_CONTROLLER

config BR2_PACKAGE_KMOD_USB_SERIAL_BELKIN
	tristate   "kmod-usb-serial-belkin....... Support for Belkin USB-to-serial converters"
	default m
	depends BR2_PACKAGE_KMOD_USB_SERIAL

config BR2_PACKAGE_KMOD_USB_SERIAL_FTDI
	tristate   "kmod-usb-serial-ftdi......... Support for FTDI USB-to-serial converterr"
	default m
	depends BR2_PACKAGE_KMOD_USB_SERIAL

config BR2_PACKAGE_KMOD_USB_SERIAL_MCT_U232
	tristate   "kmod-usb-serial-mct-u232..... Support for Magic Control Technology USB-to-Serial converters"
	default m
	depends BR2_PACKAGE_KMOD_USB_SERIAL

config BR2_PACKAGE_KMOD_USB_SERIAL_PL2303
	tristate   "kmod-usb-serial-pl2303....... Support for Prolific PL2303 USB-to-Serial converters"
	default m
	depends BR2_PACKAGE_KMOD_USB_SERIAL

config BR2_PACKAGE_KMOD_USB_STORAGE
	tristate "kmod-usb-storage............... Support for USB storage devices"
	default m
	depends BR2_PACKAGE_KMOD_USB_CONTROLLER

comment "Misc. device support ----------"

config BR2_PACKAGE_KMOD_AX25
	tristate "kmod-ax25...................... AX25 support"
	default m
	help
	  Kernel modules for AX25 protocol family
	   - ax25.o: AX25 layer 2 support
	   - mkiss.o: AX25 KISS driver
	  

config BR2_PACKAGE_KMOD_BLUETOOTH
	tristate "kmod-bluetooth................. Bluetooth drivers and network stack"
	default m
	help
	  Bluetooth drivers and network stack
	  

config BR2_PACKAGE_KMOD_LP
	tristate "kmod-lp........................ Parallel port and lp support"
	default m
	help
	  Kernel modules for line printer and parallel port support
	  

config BR2_PACKAGE_KMOD_WD1100
	tristate "kmod-wd1100.................... Soekris net4801 watchdog"
	default y
	depends BR2_LINUX_2_4_X86
	help
	  Driver for the NatSemi SC1x00 series Watchdog 
	  found on Soekris net4801 boards
	  

comment "Additional kernel modules -----"

source "target/linux/package/Config.in"