openwrt-owl/target/linux/sunxi/patches-4.1/110-mtd-move-nand_ecc_ctrl-...

136 lines
4.3 KiB
Diff
Raw Normal View History

From 3282055a7d0a304d541dbdbe2e32167e1a2f117c Mon Sep 17 00:00:00 2001
From: Boris BREZILLON <boris.brezillon@free-electrons.com>
Date: Mon, 28 Jul 2014 14:20:54 +0200
Subject: [PATCH] mtd: nand: Take nand_ecc_ctrl initialization out of
nand_scan_tail
Take ECC initialization code portion out of nand_scan_tail so that we can
re-use this implementation.
This commit only moves some code around and makes no functional changes.
Signed-off-by: Boris BREZILLON <boris.brezillon@free-electrons.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
---
drivers/mtd/nand/nand_base.c | 91 +++++++++++++++++++++++++++-----------------
1 file changed, 56 insertions(+), 35 deletions(-)
--- a/drivers/mtd/nand/nand_base.c
+++ b/drivers/mtd/nand/nand_base.c
@@ -3892,42 +3892,15 @@ static bool nand_ecc_strength_good(struc
return corr >= ds_corr && ecc->strength >= chip->ecc_strength_ds;
}
-/**
- * nand_scan_tail - [NAND Interface] Scan for the NAND device
- * @mtd: MTD device structure
- *
- * This is the second phase of the normal nand_scan() function. It fills out
- * all the uninitialized function pointers with the defaults and scans for a
- * bad block table if appropriate.
+/*
+ * Initialize ECC struct:
+ * - fill ECC struct with default function/values when these ones are undefined
+ * - fill ECC infos based on MTD device
*/
-int nand_scan_tail(struct mtd_info *mtd)
+static int nand_ecc_ctrl_init(struct mtd_info *mtd, struct nand_ecc_ctrl *ecc)
{
int i;
- struct nand_chip *chip = mtd->priv;
- struct nand_ecc_ctrl *ecc = &chip->ecc;
- struct nand_buffers *nbuf;
- /* New bad blocks should be marked in OOB, flash-based BBT, or both */
- BUG_ON((chip->bbt_options & NAND_BBT_NO_OOB_BBM) &&
- !(chip->bbt_options & NAND_BBT_USE_FLASH));
-
- if (!(chip->options & NAND_OWN_BUFFERS)) {
- nbuf = kzalloc(sizeof(*nbuf) + mtd->writesize
- + mtd->oobsize * 3, GFP_KERNEL);
- if (!nbuf)
- return -ENOMEM;
- nbuf->ecccalc = (uint8_t *)(nbuf + 1);
- nbuf->ecccode = nbuf->ecccalc + mtd->oobsize;
- nbuf->databuf = nbuf->ecccode + mtd->oobsize;
-
- chip->buffers = nbuf;
- } else {
- if (!chip->buffers)
- return -ENOMEM;
- }
-
- /* Set the internal oob buffer location, just after the page data */
- chip->oob_poi = chip->buffers->databuf + mtd->writesize;
/*
* If no default placement scheme is given, select an appropriate one.
@@ -3953,9 +3926,6 @@ int nand_scan_tail(struct mtd_info *mtd)
}
}
- if (!chip->write_page)
- chip->write_page = nand_write_page;
-
/*
* Check ECC mode, default to software if 3byte/512byte hardware ECC is
* selected and we have 256 byte pagesize fallback to software ECC
@@ -4125,6 +4095,57 @@ int nand_scan_tail(struct mtd_info *mtd)
}
ecc->total = ecc->steps * ecc->bytes;
+ return 0;
+}
+
+/**
+ * nand_scan_tail - [NAND Interface] Scan for the NAND device
+ * @mtd: MTD device structure
+ *
+ * This is the second phase of the normal nand_scan() function. It fills out
+ * all the uninitialized function pointers with the defaults and scans for a
+ * bad block table if appropriate.
+ */
+int nand_scan_tail(struct mtd_info *mtd)
+{
+ int ret;
+ struct nand_chip *chip = mtd->priv;
+ struct nand_ecc_ctrl *ecc = &chip->ecc;
+ struct nand_buffers *nbuf;
+
+ /* New bad blocks should be marked in OOB, flash-based BBT, or both */
+ BUG_ON((chip->bbt_options & NAND_BBT_NO_OOB_BBM) &&
+ !(chip->bbt_options & NAND_BBT_USE_FLASH));
+
+ if (!(chip->options & NAND_OWN_BUFFERS)) {
+ nbuf = kzalloc(sizeof(*nbuf) + mtd->writesize
+ + mtd->oobsize * 3, GFP_KERNEL);
+ if (!nbuf)
+ return -ENOMEM;
+ nbuf->ecccalc = (uint8_t *)(nbuf + 1);
+ nbuf->ecccode = nbuf->ecccalc + mtd->oobsize;
+ nbuf->databuf = nbuf->ecccode + mtd->oobsize;
+ chip->buffers = nbuf;
+ } else {
+ if (!chip->buffers)
+ return -ENOMEM;
+ }
+
+ /* Set the internal oob buffer location, just after the page data */
+ chip->oob_poi = chip->buffers->databuf + mtd->writesize;
+
+ if (!chip->write_page)
+ chip->write_page = nand_write_page;
+
+ /* Initialize ECC struct */
+ ret = nand_ecc_ctrl_init(mtd, ecc);
+ if (ret) {
+ if (!(chip->options & NAND_OWN_BUFFERS))
+ kfree(chip->buffers);
+
+ return ret;
+ }
+
/* Allow subpage writes up to ecc.steps. Not possible for MLC flash */
if (!(chip->options & NAND_NO_SUBPAGE_WRITE) && nand_is_slc(chip)) {
switch (ecc->steps) {