diff --git a/payloads/library/credentials/Croc_Getonline/README.md b/payloads/library/credentials/Croc_Getonline/README.md
new file mode 100644
index 0000000..17db8c2
--- /dev/null
+++ b/payloads/library/credentials/Croc_Getonline/README.md
@@ -0,0 +1,78 @@
+# Croc_Getonline
+
+## INTRODUCTION :
+  - This project is developed for the HAK5 KeyCroc
+  - Attempt to connect Keycroc automatically to target wifi access point.
+
+* **TESTED ON**
+  - Windows 10
+  - Raspberry pi 4 (bullseye image)
+  - linux (parrot os)
+
+## INSTALLATION :
+
+  - Enter arming mode on your keycroc to install file.
+  - Download the Croc_getonline.txt payload and Place this in the KeyCroc **payload folder**
+
+## STARTING GETONLINE :
+
+   - After install plug into target and type in anywhere
+   - **getonline_W** <-- MATCH word for windows
+   - **getonline_L** <-- MATCH word for Linux
+   - **getonline_R** <-- MATCH word for Raspberry pi
+   - When the payload is done running the LED will light up green
+   - Keycroc should now be connected to target wifi access point
+   - NOTE: for linux edit payload for passwd needed for sudo permission
+
+## PAYLOAD INFO :
+
+**PowerShell script that performs the following actions:**
+
+Gets the drive letter of a volume with the label "KeyCroc" and assigns it to the $MOUNT_POINT variable using the Get-WmiObject cmdlet.
+Gets the SSID of the currently connected wireless network and assigns it to the $currentSSID variable using the netsh wlan command and Select-String cmdlet.
+
+Gets the password for the current wireless network and assigns it to the $lastObject variable using the netsh wlan command, Select-String cmdlet, and a series of ForEach-Object and Select-Object cmdlets. The password is then formatted as a string and written to a file at the location specified by $MOUNT_POINT.
+Dismounts the volume at $MOUNT_POINT using the Dismount-WindowsImage cmdlet, and exits the script.
+
+**Bash script that performs the following actions:**
+
+Sets the mount point for a volume with the label "KeyCroc" to /media/$(whoami)/KeyCroc.
+Gets the SSID of the currently connected wireless network using the iw command, grep, and awk to extract the SSID.
+Gets the password for the current wireless network by searching for the SSID in the /etc/wpa_supplicant/wpa_supplicant.conf file and extracting the password using sed.
+Writes the SSID and password to a file located at $MOUNT_POINT using tee.
+Unmounts the volume at $MOUNT_POINT using umount, and exits the script.
+
+**Bash script that performs the following actions:**
+
+Sets the mount point for a volume with the label "KeyCroc" to /mnt/usb.
+Creates the mount point directory using mkdir with the -p flag to create the directory if it does not exist.
+Mounts the volume with the label "KeyCroc" to the mount point directory using the mount command with the -L flag to specify the label of the volume to be mounted.
+Gets the SSID of the currently connected wireless network using the iw command, grep, and awk to extract the SSID.
+Gets the password for the current wireless network by searching for the SSID in the /etc/NetworkManager/system-connections/ directory and extracting the password using grep and sed.
+Writes the SSID and password to a file located at $MOUNT_POINT using tee with sudo to obtain elevated privileges.
+Unmounts the volume at $MOUNT_POINT using umount, and exits the script.
+
+Overall, this script retrieving the Wi-Fi password for the currently connected network and storing it in a file located on a specific mounted volume with the label "KeyCroc".
+
+**-Sed command that performs the following actions:** 
+
+By default, sed reads each line of a file. For each cycle, it removes the newline, places the result in the pattern space, goes through a sequence of commands, re-appends the newline and prints the result e.g. sed '' file replicates the cat command. The sed commands are usually placed between '...' and represent a cycle, thus:
+
+1{x;s#^#sed -n 1p wifipass.txt#e;x}
+
+1{..} executes the commands between the ellipses on the first line of config.txt. Commands are separated by ;'s
+x sed provides two buffers. After removing the newline that delimits each line of a file, the result is placed in the pattern space. Another buffer is provided empty, at the start of each invocation, called the hold space. The x swaps the pattern space for the hold space.
+s#^#sed -n 1p wifipass.txt this inserts another sed invocation into the empty hold space and evaluates it by the use of the e flag. The second invocation turns off implicit printing (-n option) and then prints line 1 of wifipass.txt only.
+x the hold space is now swapped with the pattern space.Thus, line 1 of wifipass.txt is placed in the hold space.
+
+10{G;s/\n(\S+).*/ \1/}
+
+10{..} executes the commands between the ellipses on the tenth line of config.txt.
+G append the contents of hold space to the pattern space using a newline as a separator.
+s/\n(\S+).*/ \1/ match on the appended hold space and replace it by a space and the first column.
+
+11{G;s/\n\S+//}
+
+11{..} executes the commands between the ellipses on the eleventh line of config.txt.
+G append the contents of hold space to the pattern space using a newline as a separator.
+s/\n\S+// match on the appended hold space and remove the newline and the first column, thus leaving a space and the second column.