From 512b5fb9ae4e20d8a04675101838944bcd476bdc Mon Sep 17 00:00:00 2001 From: Stephen Schoettler Date: Mon, 21 Aug 2017 01:28:43 -0700 Subject: [PATCH] Improve Firmware Recovery Instructions (#8) --- index.md | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) diff --git a/index.md b/index.md index 0e29520..5b328a5 100644 --- a/index.md +++ b/index.md @@ -191,9 +191,13 @@ apt-get update; apt-get upgrade | /dev/nandf | Mass storage partition (mounted at /root/udisk) | ## Firmware Recovery -If the Bash Bunny fails to boot more than 3 times, it will automatically enter recovery mode. The LED will blink red while the file system is replaced by the backup partition. **DO NOT UNPLUG THE BASH BUNNY DURING RECOVERY** +1. Set the Bash Bunny switch to position 3 (arming mode) +2. Plug the Bash Bunny into a USB power source. The LED will momentarily light green. As soon as the LED goes off, unplug the Bash Bunny. +3. Repeat the previous step twice more (for a total of 3 times) +4. Plug the Bash Bunny into a USB power source and leave for 4 minutes. The LED will light RED to indicate recovery. When the light returns to BLUE blinking, the Bash Bunny has recovered. + +**DO NOT UNPLUG THE BASH BUNNY DURING RECOVERY** -This process takes about 3 minutes. When complete, the Bash Bunny will reboot as indicated by the blinking green LED. ## Specifications * Quad-core ARM Cortex A7