3.1 KiB
3.1 KiB
FICBunny
- Title: FICBunny
- Short Description: Firmware Image Creator for the Bash Bunny
- Author: HSF3232 (@Hacksawfred3232)
- Contributer: Austin Spraggins (@spragginsdesigns)
- Version: 1.0
- Last tested Bunny Firmware version: 1.7
Long Description
The primary purpose of this script is to create a backup image (in case you want to revert to a known good point). Then replace the missing firmware image within /dev/nandg, should it be missing.
Note: It may be a good idea to disable non-critical services - if any - on the bunny before starting this payload.
WARNING: /dev/nandg CONTAINS RECOVERY RELATED FILES! WHILE I HAVE TESTED THIS SCRIPT MANY TIMES TO ENSURE IT DOESN'T DO ANYTHING SCREWEY, YOU NORMALLY SHOULD NOT TOUCH /dev/nandg! IF YOU DON'T WANT TO MESS WITH THE RECOVERY PARTITION, TURN OFF "WriteToRecovery"!!
Variables
| Name | Description | Default |
|---|---|---|
| WriteToRecovery | When firmware image extraction is complete, write the firmware image to recovery? | 1 |
| Overwrite | If an existing firmware file is detected within recovery, overwrite it? | 0 |
STATUS
| LED | Status |
|---|---|
| SETUP | Copying required script file to /tmp, creating needed directories, and mounting partitions |
| FAIL | Couldn't find the file of script needed within payload directory |
| STAGE 1 | Extracting uImage file |
| STAGE 2 | Copying rootFS into rootfs.tar |
| STAGE 3 | Compile the firmware file from rootfs.tar and uImage into a file on MassDisk |
| STAGE 4 | Looking in Recovery partition for backup firmware image |
| R SOLID | Backup firmware image missing! If told to, will copy generated backup firmware image into recovery. |
| C QUAD | Backup firmware image found! If told to, script will overwrite it. |
| M VERYFAST | Writing to recovery partition, DO NOT UNPLUG!!!! |
| CLEANUP | Removing temporary directories and unmounting partitions |
| FINISH | Script is finished, starting arming mode (ATTACKMODE SERIAL STORAGE) |